Skip to Content
Version 122.1 by Kilight Cao on 2022/12/30 09:40
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
Xiaoling 117.2 67 == 1.3 Features ==
68
69
Xiaoye 6.2 70 * Open Source Debian system
71 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 72 * Remote Management
Edwin Chen 49.1 73 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 74 * LoRaWAN Gateway
75 * 10 programmable parallel demodulation paths
Xiaoye 26.1 76 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 77 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 78 * Different kinds of LoRaWAN Connections such as
79 ** Semtech UDP Packet Forwarder
80 ** LoRaWAN Basic Station
81 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 82 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 84
Xiaoling 117.2 85 == 1.4 Block Diagram ==
Xiaoling 69.3 86
Xiaoye 35.1 87
Xiaoling 69.3 88
Xiaoling 117.2 89 == 1.5 LED Indicators ==
90
91
Xiaoye 35.1 92 LPS8-V2 has totally four LEDs, They are:
93
94
Xiaoling 69.3 95 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 96
Xiaoling 107.3 97 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 98
Xiaoling 107.3 99 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 100
Xiaoye 84.1 101 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 102
Xiaoye 84.1 103 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 104
Xiaoling 69.4 105 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 106
Xiaoye 84.1 107 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 108
109
Xiaoling 117.2 110 == 1.6 Button Intruction ==
Xiaoling 107.2 111
Xiaoling 69.3 112
Xiaoye 84.1 113 LPS8-V2 has a black toggle button, which is:
114
115
116 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117
118 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
119
120
Xiaoye 85.1 121 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 122
123 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
124
Xiaoling 107.2 125
Xiaoling 117.2 126 = 2. Quick Start =
Xiaoling 107.2 127
Xiaoye 8.1 128
Xiaoye 26.1 129 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 130
Xiaoye 26.1 131 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 132
133
Xiaoling 117.2 134 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 135
Xiaoling 117.2 136 == 2.1.1 connect the network ==
Xiaoye 8.1 137
138
Xiaoling 69.4 139 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 140
Xiaoling 69.4 141
Xiaoling 69.10 142 (((
Xiaoye 35.1 143 Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 144 )))
Xiaoye 26.1 145
Xiaoling 69.10 146 (((
Xiaoye 35.1 147 You can also use this IP to connect.
Xiaoling 69.10 148 )))
Xiaoye 35.1 149
150 [[image:image-20220622100129-1.png||height="332" width="1263"]]
151
152
153
Xiaoling 69.4 154 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 155
Xiaoling 69.4 156
Xiaoye 35.1 157 [[image:image-20220622100542-2.png||height="369" width="1256"]]
158
159
Xiaoling 69.4 160 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 161
162
163 [[image:image-20220622102702-6.png]]
164
165
Xiaoling 69.4 166
Xiaoye 35.1 167 **Wi-Fi configuration successful**
168
169
170 [[image:image-20220622102847-7.png]]
171
Xiaoling 69.4 172
Xiaoling 107.2 173 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 174
175
Xiaoling 117.2 176 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 177
Xiaoling 117.2 178 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 179
180
Xiaoling 69.12 181 (((
Xiaoye 41.1 182 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 183
184
Xiaoling 69.12 185 )))
Xiaoye 26.1 186
Xiaoling 107.2 187 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 188
189
Xiaoling 117.2 190 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 191
Xiaoye 41.1 192
193 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
194
Xiaoling 83.4 195
Xiaoling 107.2 196 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 197
198
Xiaoling 69.4 199 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 200
Xiaoling 69.4 201
Xiaoye 41.1 202 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
203
204 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
205
206 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
207
208 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
209
210
211 [[image:image-20220622103956-12.png]]
212
213
Xiaoling 117.2 214 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 215
216
217 **Login to The Things Network**
218
219 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
220
Xiaoling 69.4 221
Xiaoye 41.1 222 **Add the gateway**
223
224 [[image:image-20220622104252-13.png||height="511" width="953"]]
225
226
227 **Get it online**
228
229
Xiaoling 117.2 230 = 3. Web Configure Pages =
Xiaoling 69.4 231
Xiaoling 117.2 232 == 3.1 Home ==
Xiaoye 8.1 233
234
Kilight Cao 23.1 235 //Shows the system running status~://
Kilight Cao 15.1 236
Xiaoling 107.2 237 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 238
Xiaoling 83.4 239
Xiaoling 117.2 240 == 3.2 LoRa Settings ==
Xiaoling 107.2 241
Xiaoling 117.2 242 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 243
244
Kilight Cao 23.1 245 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 246
Kilight Cao 23.1 247 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 248
Xiaoye 83.1 249 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 250 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 251
Kilight Cao 23.1 252 (% class="wikigeneratedid" %)
Xiaoling 69.4 253 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 254
Xiaoling 83.4 255
Kilight Cao 23.1 256 (% class="wikigeneratedid" %)
257 [[image:image-20220616110739-1.png||height="372" width="682"]]
258
259
Xiaoling 69.4 260 (((
Xiaoling 103.3 261 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 262 )))
Kilight Cao 23.1 263
264
Xiaoling 117.2 265 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 266
Xiaoling 117.2 267 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 268
269
270 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
271
Xiaoling 83.4 272
Kilight Cao 23.1 273 [[image:image-20220616111932-2.png||height="516" width="672"]]
274
275
Xiaoling 117.2 276 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 277
Kilight Cao 23.1 278
279 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
280
Xiaoling 83.4 281
Kilight Cao 23.1 282 [[image:image-20220616113246-3.png||height="396" width="672"]]
283
284
Xiaoling 69.12 285 (((
Xiaoling 103.4 286 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 287 )))
Kilight Cao 23.1 288
289
Xiaoling 117.2 290 == 3.4 Network Settings ==
Xiaoling 69.5 291
Xiaoling 117.2 292 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 293
294
295 [[image:image-20220616114756-4.png||height="251" width="669"]]
296
297
Xiaoling 117.2 298 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 299
Kilight Cao 23.1 300
Xiaoye 83.1 301 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 302
303
Xiaoling 117.2 304 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 305
Kilight Cao 23.1 306
307 [[image:image-20220616115351-6.png||height="244" width="661"]]
308
309
Xiaoling 117.2 310 == 3.5 System ==
Xiaoling 69.5 311
Kilight Cao 122.1 312 === 3.5.1 System ~-~-> System Overview ===
Kilight Cao 23.1 313
314
315 Shows the system info:
316
Xiaoling 109.2 317 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 318
Xiaoling 69.5 319
Xiaoling 117.2 320 === 3.5.2 System ~-~-> Backup/Restore ===
Xiaoling 107.2 321
Kilight Cao 23.1 322
Xiaoling 109.2 323 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 324
325
Kilight Cao 121.1 326 === 3.5.3 System ~-~-> Remoteit ===
327
328
329 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
330
331
332 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
333
334 [[image:image-20221230092303-2.png]]
335
336
Xiaoling 117.2 337 = 4. Build-in Server =
Kilight Cao 23.1 338
Xiaoye 53.1 339
Xiaoye 83.1 340 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 341
Xiaoling 83.4 342
Xiaoling 107.2 343 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 344
345
Xiaoling 83.4 346 (% style="color:red" %)**Note:**
Kilight Cao 58.1 347
Xiaoye 83.1 348 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 349
350
Xiaoye 83.1 351 **Troubleshooting:**
Kilight Cao 59.1 352
Xiaoye 60.1 353
Xiaoye 83.1 354 **~ 1. URL does not jump properly**
Xiaoye 60.1 355
Kilight Cao 86.1 356 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 357
Kilight Cao 86.1 358 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 359
360
Xiaoling 117.2 361 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 362
Kilight Cao 58.1 363
Xiaoling 109.3 364 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 365
Xiaoye 83.1 366 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 367
368
Xiaoye 83.1 369 Login account:
Xiaoling 69.5 370
Xiaoye 83.1 371 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 372
Xiaoye 83.1 373 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 374
Kilight Cao 59.1 375
Xiaoye 83.1 376 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 377
378
Xiaoling 117.2 379 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 380
Xiaoling 69.6 381
Xiaoling 109.3 382 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 383
384
Kilight Cao 87.1 385 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 386
387
Xiaoye 83.1 388 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 389
390
391
Xiaoling 117.2 392 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 393
Xiaoye 116.1 394 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 395
Xiaoye 116.1 396
397 the users can refer to this link to install them.
398
399 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
400
401
Xiaoling 117.2 402 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 403
Kilight Cao 74.1 404
Xiaoling 109.3 405 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 406
Xiaoling 109.3 407
Kilight Cao 74.1 408 Port 1 of the UART on the LPS8v2 is GND
409
Kilight Cao 79.1 410 (% class="box infomessage" %)
411 (((
Xiaoling 107.2 412 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 413
Xiaoling 107.2 414 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 415
Xiaoling 107.2 416 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 417 )))
Kilight Cao 74.1 418
419
Kilight Cao 77.1 420 **LPS8v2 UART connection photo**
421
422 [[image:image-20220804163015-1.png||height="621" width="466"]]
423
424
425
Kilight Cao 78.1 426 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 427
Xiaoling 83.4 428
Kilight Cao 77.1 429 [[image:image-20220804164928-3.png||height="320" width="332"]]
430
Xiaoling 83.4 431
Kilight Cao 77.1 432 [[image:image-20220804164747-2.png||height="622" width="594"]]
433
Xiaoling 83.4 434
Xiaoling 117.2 435 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 436
Xiaoling 83.4 437
Xiaoye 102.1 438 == **Step 1: Configure Frequency Band** ==
439
440
441 //Each country has a requirement for frequency region. Choose the right one for your area.//
442
443 [[image:image-20220905164308-1.png]]
444
445
Xiaoling 107.2 446
Xiaoling 103.5 447 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 448
449
450 **Select one of the servers to configure.**
451
452 **For example:**
453
454 [[image:image-20220905164847-2.png]]
455
456
Xiaoling 107.2 457
Xiaoling 103.5 458 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 459
460
461 **Access the gateway CLI via SSH.**
462
463 [[image:image-20220905165222-3.png]]
464
465
466 **Download gateway-rs.**
467
468 [[image:image-20220905165715-5.png]]
469
470 (% class="box infomessage" %)
471 (((
Xiaoling 103.7 472 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 473 )))
474
475
476 **Install gateway-rs.**
477
478 [[image:image-20220905165917-7.png]]
479
480 (% class="box infomessage" %)
481 (((
Xiaoling 103.7 482 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 483 )))
484
485
486 **Modify configuration.**
487
488
489 [[image:image-20220905173847-12.png]]
490
491
492 (% class="box infomessage" %)
493 (((
Xiaoling 103.7 494 **region=<Enter regional parameters> \
Xiaoye 102.1 495 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 496 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 497 )))
498
499
500 **Restart the helium_gateway**
501
502 [[image:image-20220905170920-9.png]]
503
504
505 (% class="box infomessage" %)
506 (((
Xiaoling 103.7 507 **systemctl restart helium_gateway**
Xiaoye 102.1 508 )))
509
510
Xiaoling 103.7 511 **Check the helium_gateway Log：**
Xiaoye 102.1 512
513 [[image:image-20220905173952-13.png]]
514
515
516 (% class="box infomessage" %)
517 (((
Xiaoling 103.7 518 **journalctl -u helium_gateway -f**
Xiaoye 102.1 519 )))
520
521
Xiaoling 103.8 522 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 523
524 where the helium gateway log is shown:
525
526 [[image:image-20220905174534-14.png]]
527
528
Xiaoling 103.8 529 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 530
531
Xiaoling 117.2 532 = 7. OTA System Update =
Xiaoling 107.2 533
Kilight Cao 23.1 534
Kilight Cao 117.1 535 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 536
Xiaoye 112.1 537
Xiaoling 117.2 538 = 8. Trouble Shooting =
Xiaoye 112.1 539
Kilight Cao 117.1 540 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
541
542
Xiaoye 113.1 543 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 544
Xiaoling 113.2 545
Xiaoye 112.1 546 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
547
548 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
549
550
551 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
552
553 **Click the update URL button to configure the URL with the current eth port address.**
554
555 [[image:image-20220920141936-2.png]]
556
557
Xiaoling 117.2 558 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 559
560
Kilight Cao 14.1 561 (((
562 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
563 )))
Xiaoye 8.1 564
Kilight Cao 14.1 565 (((
566 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 567
Edwin Chen 50.1 568
Xiaoling 117.2 569 = 10. Reference =
Xiaoling 69.6 570
Edwin Chen 50.1 571
Edwin Chen 52.1 572 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 573 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 574
Kilight Cao 15.1 575
Kilight Cao 14.1 576 )))
Xiaoye 8.1 577
Xiaoling 117.2 578 = 11. Order Info =
Xiaoye 8.1 579
Xiaoling 69.6 580
Edwin Chen 42.1 581 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 582
Kilight Cao 14.1 583 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 584
Xiaoling 69.6 585 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
586 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
587 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
588 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
589 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
590 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 591
Edwin Chen 42.1 592 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
593
Xiaoling 69.6 594 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
595 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
596 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
597 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 598
599 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
600
601
Xiaoling 117.2 602 = 12. Manufacturer Info =
Xiaoling 69.6 603
Xiaoye 8.1 604
605 **Shenzhen Dragino Technology Development co. LTD**
606
607 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
608
609 LongCheng Street, LongGang District ; Shenzhen 518116,China
610
611
Xiaoling 117.2 612 = 13. FCC Warning =
Xiaoling 69.6 613
Xiaoye 8.1 614
Xiaoling 69.12 615 (((
Xiaoye 8.1 616 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 617 )))
Xiaoye 8.1 618
Xiaoling 69.12 619 (((
Xiaoye 8.1 620 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 621 )))
Xiaoye 8.1 622
Xiaoling 69.12 623 (((
Xiaoye 8.1 624 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 625 )))
Xiaoye 8.1 626
Xiaoling 69.12 627 (((
Xiaoye 8.1 628 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 629 )))
Xiaoye 8.1 630
Xiaoling 69.12 631 (((
Xiaoye 8.1 632 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 633 )))
Xiaoye 8.1 634
635
Xiaoling 69.12 636 (((
Xiaoye 8.1 637 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 638 )))
Xiaoye 8.1 639
640
Xiaoling 69.12 641 (((
Xiaoye 8.1 642 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 643
644
Xiaoye 8.1 645 )))
Xiaoling 69.12 646 )))