Last modified by Kilight Cao on 2024/09/21 09:44
<
From version < 78.6 >
edited by Xiaoling
on 2022/05/13 18:32
To version < 13.1 >
edited by Xiaoling
on 2022/05/13 13:36
>
Change comment: Uploaded new attachment "1652420169255-959.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,7 @@
1 1  
2 2  
3 3  (% style="text-align:center" %)
4 -[[image:1652409757234-446.png||height="399" width="399"]]
4 +[[image:1652409757234-446.png]]
5 5  
6 6  
7 7  
... ... @@ -8,7 +8,7 @@
8 8  **DLOS8N Outdoor LoRaWAN Gateway User Manual**
9 9  
10 10  
11 -**Table of Contents：**
11 +Table of Contents
12 12  
13 13  {{toc/}}
14 14  
... ... @@ -19,35 +19,24 @@
19 19  
20 20  == 1.1 What is the DLOS8N ==
21 21  
22 -(((
23 -The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
24 -)))
22 +The DLOS8N is (% class="mark" %)an open source outdoor LoRaWAN Gateway(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
25 25  
26 -(((
27 -DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
28 -)))
24 +DLOS8N (% class="mark" %)supports Semtech packet forwarder(%%) and (% class="mark" %)LoRaWAN Station connection(%%), it is fully compatible with LoRaWAN protocol. DLOS8N includes a(% class="mark" %) SX1302 LoRaWAN concentrator(%%).
29 29  
30 -(((
31 -DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
32 -)))
26 +DLOS8N has (% class="mark" %)pre-configured standard LoRaWAN frequency bands(%%) to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
33 33  
34 -(((
35 35  DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
36 -)))
37 37  
38 -(((
39 -DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
40 -)))
30 +DLOS8N supports (% class="mark" %)auto-provision(%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
41 41  
42 42  [[image:1652411526195-923.png]]
43 43  
34 +
44 44  == 1.2 Specifications ==
45 45  
46 46  **Hardware System:**
47 47  
48 -(((
49 49   Linux Part:
50 -)))
51 51  
52 52  * 400Mhz ar9331 processor
53 53  * 64MB RAM
... ... @@ -128,12 +128,14 @@
128 128  
129 129  == 1.4 Hardware System Structure ==
130 130  
131 -[[image:1652411641871-482.png||height="416" width="716"]]
120 +[[image:1652411641871-482.png||height="425" width="732"]]
132 132  
122 +
133 133  == 1.5 DLOS8N Applications ==
134 134  
135 135  [[image:1652411671209-920.png||height="618" width="650"]]
136 136  
127 +
137 137  == 1.6 LED Indicators ==
138 138  
139 139  [[image:1652411720670-489.png]]
... ... @@ -156,6 +156,7 @@
156 156  )))
157 157  )))
158 158  
150 +
159 159  == 1.7 WiFi Direction ==
160 160  
161 161  DLOS8N use directional WiFi Antenna. The best direction is as below:
... ... @@ -162,6 +162,7 @@
162 162  
163 163  [[image:1652412859663-161.png||height="341" width="333"]]
164 164  
157 +
165 165  = 2. Access and Configure DLOS8N =
166 166  
167 167  The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
... ... @@ -172,6 +172,7 @@
172 172  
173 173  [[image:1652412985720-934.png]]
174 174  
168 +
175 175  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
176 176  
177 177  [[image:1652413127647-377.png]]
... ... @@ -178,19 +178,17 @@
178 178  
179 179  (% style="background-color:#ffffcc" %)dragino+dragino
180 180  
181 -(((
182 182  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
183 -)))
184 184  
177 +
185 185  === 2.1.2 Connect via Ethernet with DHCP IP from router ===
186 186  
187 187  [[image:1652414114583-532.png]]
188 188  
189 189  
190 -(((
191 191  Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
192 -)))
193 193  
185 +
194 194  === 2.1.3 Connect via WiFi with DHCP IP from router ===
195 195  
196 196  [[image:1652414137639-956.png]]
... ... @@ -198,10 +198,12 @@
198 198  
199 199  If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
200 200  
193 +
201 201  === 2.1.4 Connect via Ethernet with fall back ip ===
202 202  
203 203  The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
204 204  
198 +
205 205  == 2.2 Access Configure Web UI ==
206 206  
207 207  **Web Interface**
... ... @@ -225,10 +225,13 @@
225 225  
226 226  [[image:1652414287022-223.png]]
227 227  
228 -= 3. Typical Network Setup =
229 229  
230 -== 3.1 Overview ==
231 231  
224 +
225 +
226 +1. Typical Network Setup
227 +11. Overview
228 +
232 232  The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
233 233  
234 234  * **WAN Port Internet Mode**
... ... @@ -236,330 +236,357 @@
236 236  * **WiFi AP Mode**
237 237  * **Cellular Mode**
238 238  
239 -== 3.2 Use WAN port to access Internet ==
236 +1.
237 +11. Use WAN port to access Internet
240 240  
241 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
239 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the **home page**:
242 242  
243 -[[image:1652420169255-959.png]]
244 244  
245 -== 3.3 Access the Internet as a WiFi Client ==
242 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
246 246  
244 +
245 +
246 +
247 +1.
248 +11. Access the Internet as a WiFi Client.
249 +
247 247  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
248 248  
249 -(((
250 -The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
251 -)))
252 252  
253 -[[image:1652420327792-211.png]]
253 +The settings for WiFi Client is under page **System à WiFi ** **à WiFi WAN Client Settings**
254 254  
255 -(((
255 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
256 +
257 +
256 256  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
257 -)))
258 258  
259 -== 3.4 Access the Internet via Cellular ==
260 260  
261 +1.
262 +11. Access the Internet via Cellular
263 +
261 261  If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
262 262  
263 -(((
266 +
264 264  First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
265 -)))
266 266  
267 -[[image:1652420606018-181.png]]
269 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
268 268  
269 269  
270 -[[image:1652420718132-929.png||height="427" width="727"]]
272 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
271 271  
272 -(((
273 -The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
274 -)))
275 275  
275 +The set up page is **System à Cellular**
276 276  
277 -(((
277 +
278 278  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
279 -)))
280 280  
281 -[[image:1652421032117-341.png||height="329" width="752"]]
280 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
282 282  
283 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
282 +**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
284 284  
285 -== 3.5 Check Internet connection ==
286 286  
287 -In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
285 +1.
286 +11. Check Internet connection
288 288  
289 -* GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
290 -* Yellow Tick   [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
291 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
288 +In the **Home** page, we can check the Internet connection.
292 292  
293 -[[image:1652421351382-793.png||height="339" width="765"]]
290 +* GREEN Tick  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]] : This interface has Internet connection.
291 +* Yellow Tick [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]] : This interface has IP address but don’t use it for internet connection.
292 +* RED Cross [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]] : This interface doesn’t connected.
294 294  
295 -= 4. Example: Configure as a LoRaWAN gateway =
294 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
296 296  
296 +
297 +
298 +
299 +
300 +1. Example: Configure as a LoRaWAN gateway
301 +
297 297  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
298 298  
299 -[[image:image-20220513140429-1.png||height="565" width="824"]]
300 300  
305 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
306 +
307 +
301 301  This chapter describes how to use the DLOS8Nto work with
302 302  
303 303  [[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
304 304  
305 -== 4.1 Create a gateway in TTN V3 Server ==
306 306  
307 -(% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
308 308  
309 -(((
314 +
315 +1.
316 +11. Create a gateway in TTN V3 Server
317 +
318 +**Step 1: Get a Unique gateway ID.**
319 +
310 310  Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
311 -)))
312 312  
313 -[[image:1652421929753-168.png||height="403" width="739"]]
314 314  
315 -The example gateway id is: a840411e96744154
323 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
316 316  
317 317  
318 -(% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
326 +The example gateway id is: **a840411e96744154**
319 319  
328 +
329 +**Step 2: Sign up a user account in TTN server**
330 +
320 320  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
321 321  
322 -[[image:1652422127479-258.png||height="346" width="738"]]
333 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
323 323  
324 324  
325 -(% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
326 326  
327 -[[image:1652422142236-792.png||height="356" width="737"]]
328 328  
329 329  
330 -(% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
331 331  
332 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
333 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
334 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
335 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
336 336  
337 -(% style="color:#4f81bd" %)**Step 4: Create a Gateway**
341 +**Step 3: Choose the TTNv3 Cluster Picker**
338 338  
339 -[[image:1652422440891-514.png||height="360" width="747"]]
343 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
340 340  
345 +
346 +**Note: Choose the cluster corresponds to a specific Gateway server address**
347 +
348 +* Europe 1 **corresponding Gateway server address: **eu1.cloud.thethings.network
349 +* North America 1 **corresponding Gateway server address:** nam1.cloud.thethings.network
350 +* Australia 1 **corresponding Gateway server address:** au1.cloud.thethings.network
351 +* Legacy V2 Console : **TTN v2 shuts down in December 2021**
352 +
353 +**Step 4: Create a Gateway**
354 +
355 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
356 +
341 341  Click the Gateway icon and then click Add gateway.
342 342  
343 343  Open the following page:
344 344  
345 - [[image:1652422470352-518.png||height="391" width="716"]]
361 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
346 346  
347 -[[image:1652422479876-297.png||height="398" width="729"]]
363 +**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
348 348  
349 -(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
350 350  
366 +
351 351  After creating the gateway, you can see the gateway info, as below.
352 352  
353 -[[image:1652422509034-682.png||height="299" width="739"]]
369 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
354 354  
355 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
356 356  
372 +1.
373 +11. Configure DLOS8N to connect to TTN v3
374 +
357 357  You can now configure the DLOS8N to let it connect to TTN network V3.
358 358  
359 359  Make sure your DLOS8N has a working Internet Connection first.
360 360  
361 -Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
362 362  
363 -[[image:1652422624783-580.png||height="327" width="729"]]
380 +Choose the right server provider and click **Save&Apply**
364 364  
365 -(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
382 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
366 366  
384 +
385 +
386 +**Note: **The server address must match the Gateway server address you choose in TTN V3.
387 +
388 +
367 367  In the home page, we can see the LoRaWAN connection is ready now.
368 368  
369 -[[image:1652422685063-596.png||height="327" width="729"]]
370 370  
392 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
393 +
394 +
395 +
371 371  In TTN v3 portal, we can also see the gateway is connected.
372 372  
373 -[[image:1652422703020-955.png||height="343" width="730"]]
398 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
374 374  
375 -== 4.3 Configure frequency ==
376 376  
401 +
402 +
403 +1.
404 +11. Configure frequency
405 +
377 377  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
378 378  
379 -[[image:1652422737399-529.png||height="362" width="737"]]
408 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
380 380  
381 381  
382 382  In logread page, user can check the frequency actually used.
383 383  
384 - [[image:1652422763536-750.png||height="514" width="730"]]
413 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]
385 385  
386 -== 4.4 Add a LoRaWAN End Device ==
387 387  
388 -(((
416 +
417 +
418 +1.
419 +11. Add a LoRaWAN End Device
420 +
389 389  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
390 -)))
391 391  
392 -(((
423 +
393 393  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
394 -)))
395 395  
396 -[[image:1652422794767-871.png]]
397 397  
398 -(((
399 -(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
400 -)))
427 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
401 401  
402 -(((
429 +**Step 1**: Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
430 +
431 +
403 403  Three codes are required to define the device in TTN v3:
404 -)))
405 405  
406 406  * DEV EUI - Unique ID code for a particular device.
407 407  * APP EUI - ID code for an Application defined in TTN v3.
408 408  * APP Key - Unique key to secure communications with a particular device.
409 409  
410 -(((
411 411  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
412 -)))
413 413  
414 -[[image:1652422840936-838.png]]
415 415  
441 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]
416 416  
417 -(((
418 -(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
419 -)))
420 420  
421 -(((
422 -
423 -)))
444 +Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
424 424  
425 -(((
446 +
426 426  For the TTN v3 server, you can use the codes set in the device as in the following example.
427 -)))
428 428  
429 -(((
430 -
431 -)))
432 432  
433 -(((
434 434  Select **Add Application** to open the screen below.
435 -)))
436 436  
437 -[[image:1652422946999-255.png||height="356" width="744"]]
452 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
438 438  
439 439  Open the **Application **select** Add end device**
440 440  
456 +
441 441  Start Register the end device
442 442  
443 -[[image:1652422975885-591.png||height="359" width="726"]]
459 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]
444 444  
445 -(((
446 446  Select OTAA activation mode
447 -)))
448 448  
449 449  
450 -(((
451 451  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
452 -)))
453 453  
454 -[[image:1652422998005-968.png||height="352" width="744"]]
466 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]
455 455  
456 456  First, input the End device ID, AppEUI and DevEUI.
457 457  
458 -[[image:1652423022781-339.png||height="365" width="741"]]
459 459  
471 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]
472 +
460 460  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
461 461  
462 -[[image:1652423046741-467.png||height="355" width="736"]]
463 463  
464 -(((
476 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.png]]
477 +
465 465  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
466 -)))
467 467  
468 468  
469 -(((
470 -(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
471 -)))
481 +**Step 2**: Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
472 472  
473 -(((
474 -(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
475 -)))
476 476  
477 -[[image:1652423277549-324.png||height="273" width="745"]]
484 +Note that it may take some time for the device data to appear in the TTN v3 display.
478 478  
479 -= 5. Web Configure Pages =
480 480  
481 -== 5.1 Home ==
487 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image041.png]]
482 482  
489 +
490 +
491 +
492 +
493 +1. Web Configure Pages
494 +
495 +1.
496 +11. Home
497 +
483 483  Shows the system running status.
484 484  
485 -[[image:1652423418568-752.png||height="329" width="724"]]
500 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image042.png]]
486 486  
487 -== 5.2 LoRa Settings ==
488 488  
489 -=== 5.2.1 LoRa ~-~-> LoRa ===
490 490  
491 -(((
504 +
505 +1.
506 +11. LoRa Settings
507 +111. LoRa ~-~-> LoRa
508 +
492 492  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
493 -)))
494 494  
495 -(((
511 +
496 496  Different DLOS8N hardware version can support different frequency range:
497 -)))
498 498  
499 499  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
500 500  * **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
501 501  
502 -(((
503 503  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
504 -)))
505 505  
506 -[[image:1652423554776-574.png||height="380" width="740"]]
519 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image043.png]]
507 507  
508 508  Note *: See this instruction for how to customize frequency band:
509 509  
510 510  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
511 511  
512 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
513 513  
526 +
527 +1.
528 +11.
529 +111. LoRa ~-~-> ABP Decryption
530 +
514 514  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
515 515  
516 516  * No internet connection.
517 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
534 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>url:http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction]]).
518 518  
519 -(((
520 -Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
521 -)))
536 +Detail of this feature: [[http:~~/~~/wiki.dragino.com/index.php?title=Communication_with_ABP_End_Node>>url:http://wiki.dragino.com/index.php?title=Communication_with_ABP_End_Node]]
522 522  
523 -[[image:1652423628833-467.png||height="357" width="755"]]
538 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.png]]
524 524  
525 -== 5.3 LoRaWAN Settings ==
526 526  
527 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
528 528  
542 +1.
543 +11. LoRaWAN Settings
544 +111. LoRaWAN ~-~-> LoRaWAN
545 +
529 529  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
530 530  
531 -[[image:1652423628833-467.png||height="357" width="755"]]
548 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image045.png]]
532 532  
533 -(% style="color:red" %)**Note:**
550 +Note
534 534  
535 535  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
536 536  
537 537  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
538 538  
539 -See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
556 +See [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Filter_unwanted_LoRaWAN_packets>>url:http://wiki.dragino.com/index.php?title=Main_Page#Filter_unwanted_LoRaWAN_packets]]
540 540  
541 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
542 542  
543 -[[image:1652428499323-384.png||height="275" width="723"]]
544 544  
545 -(((
560 +1.
561 +11.
562 +111. LoRaWAN ~-~-> Amazon AWS-IoT
563 +
564 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.png]]
565 +
546 546  Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
547 -)))
548 548  
549 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
550 550  
551 -(((
569 +
570 +
571 +1.
572 +11.
573 +111. LoRaWAN ~-~-> LORIOT
574 +
552 552  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
553 -)))
554 554  
555 -(((
556 556  Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
557 -)))
558 558  
559 -[[image:1652428648903-878.png||height="266" width="731"]]
579 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image047.png]]
560 560  
561 -== 5.4 MQTT Settings ==
562 562  
582 +
583 +
584 +1.
585 +11. MQTT Settings
586 +
563 563  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
564 564  
565 565  Instruction:
... ... @@ -566,94 +566,108 @@
566 566  
567 567  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
568 568  
569 -[[image:1652428705046-212.png||height="417" width="733"]]
570 570  
571 -== 5.5 System ==
594 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.png]]
572 572  
573 -=== 5.5.1 System ~-~-> System Overview ===
574 574  
597 +1.
598 +11. System
599 +111. System ~-~-> System Overview
600 +
575 575  Shows the system info:
576 576  
577 -[[image:1652428773760-580.png||height="408" width="728"]]
603 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image049.png]]
578 578  
579 -=== 5.5.2 System ~-~-> General ( login settings) ===
605 +1.
606 +11.
607 +111. System ~-~-> General ( login settings)
580 580  
581 -[[image:1652428861256-300.png||height="354" width="724"]]
609 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.png]]
582 582  
583 -(((
584 -**__System Password:__**
585 -)))
611 +System Password:
586 586  
587 -(((
588 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
589 -)))
613 +There are two login for DLOS8N: root /dragino or admin /dragino. Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
590 590  
591 -(((
592 592  This page can be used to set the password for them.
593 -)))
594 594  
595 -(((
596 -
597 -)))
598 598  
599 -(((
600 -**__Timezone:__**Set device timezone.
601 -)))
618 +Timezone:
602 602  
603 -(((
604 -
605 -)))
620 +Set device timezone.
606 606  
607 -(((
608 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
609 -)))
610 610  
611 -=== 5.5.3 System ~-~-> Network ===
623 +Port forwarding:
612 612  
613 -[[image:1652429149053-824.png||height="467" width="725"]]
625 +Enable/Disable the HTTP and SSH access via WAN interface.
614 614  
615 -(((
616 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
617 -)))
618 618  
619 -(((
620 -__**WAN Settings:**__Setting for DLOS8N WAN port
621 -)))
622 622  
623 -(((
624 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
625 -)))
626 626  
627 -=== 5.5.4 System ~-~-> WiFi ===
630 +1.
631 +11.
632 +111. System ~-~-> Network
628 628  
634 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image051.png]]
635 +
636 +LAN Settings:
637 +
638 +When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
639 +
640 +
641 +WAN Settings:
642 +
643 +Setting for DLOS8N WAN port
644 +
645 +
646 +WiFi Settings:
647 +
648 +Setting for DLOS8N WiFi IP when use it as WiFi Client
649 +
650 +
651 +
652 +
653 +
654 +1.
655 +11.
656 +111. System ~-~-> WiFi
657 +
629 629  DLOS8N WiFi Settings.
630 630  
631 -[[image:1652429430767-921.png||height="367" width="723"]]
660 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.png]]
632 632  
633 633  
634 -=== 5.5.5 System ~-~-> Cellular ===
663 +1.
664 +11.
665 +111. System ~-~-> Cellular
635 635  
636 636  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
637 637  
638 -[[image:1652429309615-825.png||height="320" width="732"]]
669 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
639 639  
640 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
671 +Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
641 641  
642 642  
643 -=== 5.5.6 System ~-~-> Network Status ===
644 644  
645 -[[image:1652429486609-208.png||height="415" width="728"]]
646 646  
676 +1.
677 +11.
678 +111. System ~-~-> Network Status
647 647  
648 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
680 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image053.png]]
649 649  
682 +
683 +
684 +1.
685 +11.
686 +111. System ~-~-> Remote Mgnt & Auto Provision
687 +
650 650  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
651 651  
652 -[[image:1652429518191-846.png||height="332" width="733"]]
690 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.png]]
653 653  
654 -[[image:1652429527544-247.png||height="327" width="724"]]
692 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image055.png]]
655 655  
656 -[[image:1652429537849-154.png||height="339" width="722"]]
694 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.png]]
657 657  
658 658  Please see this document for detail:
659 659  
... ... @@ -664,10 +664,12 @@
664 664  
665 665  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
666 666  
667 -[[image:1652429624400-864.png||height="432" width="716"]]
705 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image057.png]]
668 668  
669 669  
670 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
708 +1.
709 +11.
710 +111. System ~-~-> Firmware Upgrade
671 671  
672 672  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
673 673  
... ... @@ -679,322 +679,305 @@
679 679  
680 680  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
681 681  
682 -(((
683 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
684 -)))
685 685  
686 -(((
687 -(% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
688 -)))
723 +The file named as **xxxxx–xxxxx-squashfs-sysupgrade.bin **is the upgrade Image. There are different methods to upgrade, as below.
689 689  
690 -[[image:1652429711145-862.png||height="270" width="737"]]
691 691  
726 +**Web à System à Firmware Upgrade**
727 +
728 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image058.png]]
729 +
730 +
692 692  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
693 693  
694 -(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
695 695  
734 +**NOTE**: You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
735 +
736 +
737 +
738 +
696 696  The system will automatically boot into the new firmware after upgrade.
697 697  
698 -[[image:1652429962190-224.png||height="358" width="729"]]
699 699  
700 -(% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
742 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image059.png]]
701 701  
702 -SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
703 703  
704 -(% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
745 +Note *: User can also upgrade firmware via Linux console
705 705  
706 -(% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
747 +SCP the firmware to the system** /var** directory and then run
707 707  
708 -=== 5.5.9 System ~-~-> Reboot/Reset ===
749 +**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
709 709  
710 -[[image:1652430197132-330.png||height="256" width="724"]]
711 711  
712 -(((
713 -
714 -)))
752 +**NOTE**: it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
715 715  
716 -=== 5.5.10 System ~-~-> Package Maintain ===
717 717  
718 -[[image:1652430243826-126.png||height="289" width="723"]]
755 +1.
756 +11.
757 +111. System ~-~-> Reboot/Reset
719 719  
759 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.png]]
760 +
761 +
762 +
763 +1.
764 +11.
765 +111. System ~-~-> Package Maintain
766 +
767 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image061.png]]
768 +
720 720  Place to show what package has installed and possible to upgrade packages.
721 721  
722 -== 5.6 LogRead ==
723 723  
724 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
725 725  
726 -[[image:1652430356784-567.png||height="325" width="730"]]
727 727  
774 +1.
775 +11. LogRead
776 +111. LogRead ~-~-> LoRa Log
777 +
778 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.png]]
779 +
728 728  Show the frequency for LoRa Radio and traffics.
729 729  
730 -=== 5.6.2 LogRead ~-~-> System Log ===
731 731  
783 +1.
784 +11.
785 +111. LogRead ~-~-> System Log
786 +
732 732  Show the system log
733 733  
734 -[[image:1652430369760-511.png||height="373" width="730"]]
789 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image063.png]]
735 735  
736 -= 6. More features =
737 737  
738 -== 6.1 More instructions ==
739 739  
793 +1. More features
794 +11. More instructions
795 +
740 740  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
741 741  
742 -= 7. Linux System =
743 743  
799 +
800 +
801 +1. Linux System
802 +
744 744  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
745 745  
746 -== 7.1 SSH Access for Linux console ==
805 +1.
806 +11. SSH Access for Linux console
747 747  
748 748  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
749 749  
810 +
750 750  IP address:  IP address of DLOS8N
751 751  
752 752  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
753 753  
754 -User Name:      (% style="color:green" %)**root**
815 +User Name:      **root**
755 755  
756 -Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
817 +Password:         **dragino** (default)
757 757  
819 +
758 758  After logging in, you will be in the Linux console and can enter commands as shown below.
759 759  
760 -[[image:1652431588565-830.png]]
761 761  
762 -The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
823 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.png]]
763 763  
764 -[[image:1652431609193-637.png||height="214" width="732"]]
765 765  
766 -== 7.2 Edit and Transfer files ==
826 +The “logread -f” command can be used to debug how system runs.
767 767  
768 -(((
769 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
770 -)))
828 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image065.png]]
771 771  
772 -(((
830 +
831 +
832 +
833 +1.
834 +11. Edit and Transfer files
835 +
836 +The DLOS8N supports the **SCP protocol** and has a built-in **SFTP server**. There are many ways to edit and transfer files using these protocols.
837 +
838 +
773 773  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
774 -)))
775 775  
776 -(((
777 777  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
778 -)))
779 779  
780 -(((
843 +
781 781  Screenshot is as below:
782 -)))
783 783  
784 -[[image:1652431650755-450.png]]
846 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.png]]
785 785  
786 786  
787 -== 7.3 File System ==
849 +1.
850 +11. File System
788 788  
789 -(((
790 790  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
791 -)))
792 792  
793 -(((
794 -
795 -)))
796 796  
797 -(((
798 798  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
799 -)))
800 800  
801 -(((
802 -
803 -)))
804 -
805 -(((
806 806  You can use an external USB flash memory device to extend the size of flash memory for storage.
807 -)))
808 808  
809 809  
810 -== 7.4 Package maintenance system ==
811 811  
812 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
813 813  
814 -(((
815 -Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
816 -)))
862 +1.
863 +11. Package maintenance system
817 817  
818 -(((
819 -**In Linux Console run:**
820 -)))
865 +DLOS8N uses the OpenWrt [[OPKG package maint>>url:https://wiki.openwrt.org/doc/techref/opkg]][[e>>url:https://wiki.openwrt.org/doc/techref/opkg]][[n>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ance>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ system>>url:https://wiki.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
821 821  
822 -(((
823 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
824 -)))
825 825  
826 -(((
827 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
828 -)))
868 +Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>url:https://wiki.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/wiki.openwrt.org/doc/techref/opkg>>url:https://wiki.openwrt.org/doc/techref/opkg]])
829 829  
830 -(((
831 -(% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
832 -)))
833 833  
834 -The system will automatically install the required packages as shown below.
871 +In Linux Console run:
835 835  
873 +**root@dragino-169d30:~~# opkg update**  ~/~/ to get the latest packages list
836 836  
837 -(((
838 -(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
839 -)))
875 +**root@dragino-169d30:~~# opkg list**         ~/~/shows the available packages
840 840  
841 -(((
842 -(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
843 -)))
877 +**root@dragino-169d30:~~# opkg install iperf **~/~/ install iperf
844 844  
845 -(((
846 -(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
847 -)))
879 +The system will automatically install the required packages as shown below.
848 848  
849 -(((
850 -(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
851 -)))
852 852  
853 -(((
854 -(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
855 -)))
882 +//root@dragino-169d30:/etc/opkg# opkg install iperf//
856 856  
857 -(((
858 -(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
859 -)))
884 +//Installing iperf (2.0.12-1) to root…//
860 860  
861 -(((
862 -(% style="background-color:#dcdcdc" %)//Configuring iperf.//
863 -)))
886 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
864 864  
865 -= 8. Upgrade Linux Firmware =
888 +//Installing uclibcxx (0.2.4-3) to root…//
866 866  
890 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
867 867  
868 -= 9. FAQ =
892 +//Configuring uclibcxx.//
869 869  
870 -== 9.1 How can I configure for a customized frequency band? ==
894 +//Configuring iperf.//
871 871  
872 -(((
896 +
897 +1. Upgrade Linux Firmware
898 +
899 +1. FAQ
900 +11. How can I configure for a customized frequency band?
901 +
873 873  See below link for how to customize frequency band:
874 -)))
875 875  
876 -(((
877 877  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
878 -)))
879 879  
880 880  
881 -== 9.2 Can I connect DLOS8N to LORIOT? ==
907 +1.
908 +11. Can I connect DLOS8N to LORIOT?
882 882  
883 883  Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
884 884  
885 885  
886 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
913 +1.
914 +11. Can I make my own firmware for the gateway, where can I find the source code?
887 887  
888 -(((
889 889  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
890 -)))
891 891  
892 -(((
893 893  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
894 -)))
895 895  
896 896  
897 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
921 +1.
922 +11. Can I use 868Mhz version for 915Mhz bands?
898 898  
899 899  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
900 900  
901 901  
902 -= 10. Trouble Shooting =
903 903  
904 -== 10.1 I get kernel error when install new package, how to fix? ==
905 905  
929 +1. Trouble Shooting
930 +11. I get kernel error when install new package, how to fix?
931 +
906 906  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
907 907  
908 -(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
909 909  
910 -(% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
935 +root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
911 911  
912 -(% style="background-color:yellow" %)Collected errors:
937 +Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
913 913  
914 -(% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
939 +Collected errors:
915 915  
916 -(% style="background-color:yellow" %)*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
941 +~* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
917 917  
918 - (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
943 +*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
919 919  
920 -(((
945 + ~* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
946 +
947 +
921 921  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
922 -)))
923 923  
924 -(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
950 +Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
925 925  
926 926  
927 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
953 +1.
954 +11. How to recover the DLOS8N if the firmware crashes
928 928  
929 -(((
930 930  Please follow this instruction to recover your gateway:
931 -)))
932 932  
933 -(((
934 934  [[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
935 -)))
936 936  
937 937  
938 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
939 939  
940 -[[image:1652435238615-272.png||height="247" width="727"]]
941 941  
942 -(((
963 +
964 +1.
965 +11. I configured DLOS8N for WiFi access and lost its IP. What to do now?
966 +
967 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image067.png]]
968 +
943 943  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
944 -)))
945 945  
946 -(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
971 +(Note: fallback IP can be disabled in the WAN and DHCP page)
947 947  
948 948  
949 949  Steps to connect via fall back IP:
950 950  
951 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
976 +1. Connect PC’s Ethernet port to DLOS8N’s WAN port
977 +1. Configure PC’s Ethernet port has
978 +IP: 172.31.255.253 and
979 +Netmask: 255.255.255.252
952 952  
953 -2. Configure PC’s Ethernet port has
954 - IP: 172.31.255.253 and
955 - Netmask: 255.255.255.252
956 -
957 957  As below photo:
958 958  
959 -[[image:1652435256286-879.png]]
983 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
960 960  
961 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
985 +1. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
962 962  
963 963  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
964 964  
965 965  
966 -= 11. Order Info =
967 967  
968 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
991 +1. Order Info
969 969  
970 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
993 +**//PART: DLOS8N-XXX-YYY//:**
971 971  
972 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
973 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
995 +**//XXX: Frequency Band//**
974 974  
975 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
997 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
998 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
976 976  
977 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
978 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
979 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
980 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1000 +**//YYY: 4G Cellular Option//**
981 981  
1002 +* **E**: EMEA, Korea, Thailand, India.
1003 +* **A**: North America/ Rogers/AT&T/T-Mobile.
1004 +* **AU**: Latin America, New Zeland, Taiwan
1005 +* **J**: Japan, DOCOMO/SoftBank/ KDDI
1006 +
982 982  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
983 983  
984 984  
985 -= 12. Packing Info =
986 986  
987 -(((
1011 +
1012 +1. Packing Info
1013 +
988 988  **Package Includes**:
989 -)))
990 990  
991 991  * DLOS8N LoRaWAN Gateway x 1
992 992  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
993 993  * Packaging with environmental protection paper box
994 994  
995 -(((
996 996  **Dimension and weight**:
997 -)))
998 998  
999 999  * Device Size: 12 x 12 x 3 cm
1000 1000  * Weight: 187g
... ... @@ -1001,9 +1001,13 @@
1001 1001  * Package Size: 14.5 x 13.5 x 6 cm
1002 1002  * Weight: 300g
1003 1003  
1004 -= 13. Support =
1027 +1. Support
1005 1005  
1006 1006  * Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1007 1007  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1008 1008  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1009 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1032 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:
1033 +
1034 +[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1035 +
1036 +
1652420327792-211.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -118.7 KB
Content
1652420606018-181.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.8 KB
Content
1652420718132-929.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -892.9 KB
Content
1652421032117-341.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1652421151598-130.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
1652421168047-470.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1652421179500-890.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
1652421351382-793.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -205.6 KB
Content
1652421929753-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1652422127479-258.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1652422142236-792.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1652422440891-514.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1652422470352-518.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.9 KB
Content
1652422479876-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -65.2 KB
Content
1652422509034-682.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1652422624783-580.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1652422685063-596.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -169.5 KB
Content
1652422703020-955.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1652422737399-529.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1652422763536-750.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1652422794767-871.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1652422840936-838.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1652422946999-255.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1652422975885-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1652422998005-968.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1652423022781-339.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1652423046741-467.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1652423277549-324.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
1652423418568-752.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -178.5 KB
Content
1652423554776-574.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -125.7 KB
Content
1652423628833-467.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
1652428499323-384.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.5 KB
Content
1652428648903-878.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
1652428705046-212.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -102.2 KB
Content
1652428773760-580.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.8 KB
Content
1652428861256-300.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -52.8 KB
Content
1652429149053-824.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
1652429273783-461.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.5 KB
Content
1652429309615-825.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1652429430767-921.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.5 KB
Content
1652429486609-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.5 KB
Content
1652429518191-846.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.4 KB
Content
1652429527544-247.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.6 KB
Content
1652429537849-154.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -107.5 KB
Content
1652429624400-864.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
1652429711145-862.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
1652429962190-224.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1652430197132-330.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.2 KB
Content
1652430243826-126.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
1652430356784-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1652430369760-511.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1652430800213-833.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431153457-839.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1652431569353-626.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431588565-830.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431609193-637.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1652431650755-450.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1652435238615-272.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -68.7 KB
Content
1652435256286-879.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -111.5 KB
Content
1652436675869-206.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
1652436705761-420.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1652436787176-950.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
image-20220513140429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -116.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0