Last modified by Kilight Cao on 2024/09/21 09:44
<
From version < 72.1 >
edited by Xiaoling
on 2022/05/13 17:47
To version < 66.1 >
edited by Xiaoling
on 2022/05/13 16:33
>
Change comment: Uploaded new attachment "1652430800213-833.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -19,15 +19,15 @@
19 19  
20 20  == 1.1 What is the DLOS8N ==
21 21  
22 -The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
22 +The DLOS8N is (% class="mark" %)an open source outdoor LoRaWAN Gateway(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  
24 -DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
24 +DLOS8N (% class="mark" %)supports Semtech packet forwarder(%%) and (% class="mark" %)LoRaWAN Station connection(%%), it is fully compatible with LoRaWAN protocol. DLOS8N includes a(% class="mark" %) SX1302 LoRaWAN concentrator(%%).
25 25  
26 -DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
26 +DLOS8N has (% class="mark" %)pre-configured standard LoRaWAN frequency bands(%%) to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
27 27  
28 28  DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
29 29  
30 -DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
30 +DLOS8N supports (% class="mark" %)auto-provision(%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
31 31  
32 32  [[image:1652411526195-923.png]]
33 33  
... ... @@ -628,7 +628,9 @@
628 628  [[image:1652429624400-864.png||height="432" width="716"]]
629 629  
630 630  
631 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
631 +1.
632 +11.
633 +111. System ~-~-> Firmware Upgrade
632 632  
633 633  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
634 634  
... ... @@ -641,194 +641,218 @@
641 641  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
642 642  
643 643  
644 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
646 +The file named as **xxxxx–xxxxx-squashfs-sysupgrade.bin **is the upgrade Image. There are different methods to upgrade, as below.
645 645  
646 -(% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
647 647  
648 -[[image:1652429711145-862.png||height="270" width="737"]]
649 +**Web à System à Firmware Upgrade**
649 649  
651 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image058.png]]
650 650  
653 +
651 651  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
652 652  
653 -(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
654 654  
657 +**NOTE**: You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
658 +
659 +
660 +
661 +
655 655  The system will automatically boot into the new firmware after upgrade.
656 656  
657 -[[image:1652429962190-224.png||height="358" width="729"]]
658 658  
665 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image059.png]]
659 659  
660 -(% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
661 661  
662 -SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
668 +Note *: User can also upgrade firmware via Linux console
663 663  
664 -(% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
670 +SCP the firmware to the system** /var** directory and then run
665 665  
666 -(% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
672 +**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
667 667  
668 668  
669 -=== 5.5.9 System ~-~-> Reboot/Reset ===
675 +**NOTE**: it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
670 670  
671 -[[image:1652430197132-330.png||height="256" width="724"]]
672 672  
678 +1.
679 +11.
680 +111. System ~-~-> Reboot/Reset
673 673  
674 -=== 5.5.10 System ~-~-> Package Maintain ===
682 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.png]]
675 675  
676 -[[image:1652430243826-126.png||height="289" width="723"]]
677 677  
685 +
686 +1.
687 +11.
688 +111. System ~-~-> Package Maintain
689 +
690 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image061.png]]
691 +
678 678  Place to show what package has installed and possible to upgrade packages.
679 679  
680 680  
681 -== 5.6 LogRead ==
682 682  
683 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
684 684  
685 -[[image:1652430356784-567.png||height="325" width="730"]]
697 +1.
698 +11. LogRead
699 +111. LogRead ~-~-> LoRa Log
686 686  
701 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.png]]
702 +
687 687  Show the frequency for LoRa Radio and traffics.
688 688  
689 689  
690 -=== 5.6.2 LogRead ~-~-> System Log ===
706 +1.
707 +11.
708 +111. LogRead ~-~-> System Log
691 691  
692 692  Show the system log
693 693  
694 -[[image:1652430369760-511.png||height="373" width="730"]]
712 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image063.png]]
695 695  
696 696  
697 -= 6. More features =
698 698  
699 -== 6.1 More instructions ==
716 +1. More features
717 +11. More instructions
700 700  
701 701  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
702 702  
703 703  
704 -= 7. Linux System =
705 705  
723 +
724 +1. Linux System
725 +
706 706  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
707 707  
708 -== 7.1 SSH Access for Linux console ==
728 +1.
729 +11. SSH Access for Linux console
709 709  
710 710  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
711 711  
733 +
712 712  IP address:  IP address of DLOS8N
713 713  
714 714  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
715 715  
716 -User Name:      (% style="color:green" %)**root**
738 +User Name:      **root**
717 717  
718 -Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
740 +Password:         **dragino** (default)
719 719  
742 +
720 720  After logging in, you will be in the Linux console and can enter commands as shown below.
721 721  
722 -[[image:1652431588565-830.png]]
723 723  
724 -The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
746 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.png]]
725 725  
726 -[[image:1652431609193-637.png||height="214" width="732"]]
727 727  
749 +The “logread -f” command can be used to debug how system runs.
728 728  
729 -== 7.2 Edit and Transfer files ==
751 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image065.png]]
730 730  
731 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
732 732  
754 +
755 +
756 +1.
757 +11. Edit and Transfer files
758 +
759 +The DLOS8N supports the **SCP protocol** and has a built-in **SFTP server**. There are many ways to edit and transfer files using these protocols.
760 +
761 +
733 733  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
734 734  
735 735  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
736 736  
766 +
737 737  Screenshot is as below:
738 738  
739 -[[image:1652431650755-450.png]]
769 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.png]]
740 740  
741 741  
742 -== 7.3 File System ==
772 +1.
773 +11. File System
743 743  
744 744  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
745 745  
777 +
746 746  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
747 747  
748 748  You can use an external USB flash memory device to extend the size of flash memory for storage.
749 749  
750 750  
751 -== 7.4 Package maintenance system ==
752 752  
753 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
754 754  
755 -Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
785 +1.
786 +11. Package maintenance system
756 756  
757 -**In Linux Console run:**
788 +DLOS8N uses the OpenWrt [[OPKG package maint>>url:https://wiki.openwrt.org/doc/techref/opkg]][[e>>url:https://wiki.openwrt.org/doc/techref/opkg]][[n>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ance>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ system>>url:https://wiki.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
758 758  
759 -(((
760 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
761 -)))
762 762  
763 -(((
764 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
765 -)))
791 +Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>url:https://wiki.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/wiki.openwrt.org/doc/techref/opkg>>url:https://wiki.openwrt.org/doc/techref/opkg]])
766 766  
767 -(((
768 -(% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
769 -)))
770 770  
794 +In Linux Console run:
795 +
796 +**root@dragino-169d30:~~# opkg update**  ~/~/ to get the latest packages list
797 +
798 +**root@dragino-169d30:~~# opkg list**         ~/~/shows the available packages
799 +
800 +**root@dragino-169d30:~~# opkg install iperf **~/~/ install iperf
801 +
771 771  The system will automatically install the required packages as shown below.
772 772  
773 773  
774 -(((
775 -(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
776 -)))
805 +//root@dragino-169d30:/etc/opkg# opkg install iperf//
777 777  
778 -(((
779 -(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
780 -)))
807 +//Installing iperf (2.0.12-1) to root…//
781 781  
782 -(((
783 -(% style="background-color:#dcdcdc" %)//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
784 -)))
809 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
785 785  
786 -(((
787 -(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
788 -)))
811 +//Installing uclibcxx (0.2.4-3) to root…//
789 789  
790 -(((
791 -(% style="background-color:#dcdcdc" %)//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
792 -)))
813 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
793 793  
794 -(((
795 -(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
796 -)))
815 +//Configuring uclibcxx.//
797 797  
798 -(((
799 -(% style="background-color:#dcdcdc" %)//Configuring iperf.//
800 -)))
817 +//Configuring iperf.//
801 801  
802 -== 8. Upgrade Linux Firmware ==
803 803  
804 -== 9. FAQ ==
820 +1. Upgrade Linux Firmware
805 805  
806 -== 9.1 How can I configure for a customized frequency band? ==
822 +1. FAQ
823 +11. How can I configure for a customized frequency band?
807 807  
808 808  See below link for how to customize frequency band:
809 809  
810 810  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
811 811  
812 -== 9.2 Can I connect DLOS8N to LORIOT? ==
813 813  
830 +1.
831 +11. Can I connect DLOS8N to LORIOT?
832 +
814 814  Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
815 815  
816 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
817 817  
836 +1.
837 +11. Can I make my own firmware for the gateway, where can I find the source code?
838 +
818 818  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
819 819  
820 820  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
821 821  
822 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
823 823  
844 +1.
845 +11. Can I use 868Mhz version for 915Mhz bands?
846 +
824 824  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
825 825  
826 -== 10. Trouble Shooting ==
827 827  
828 -== 10.1 I get kernel error when install new package, how to fix? ==
829 829  
851 +
852 +1. Trouble Shooting
853 +11. I get kernel error when install new package, how to fix?
854 +
830 830  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
831 831  
857 +
832 832  root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
833 833  
834 834  Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
... ... @@ -846,14 +846,21 @@
846 846  
847 847  Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
848 848  
849 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
850 850  
876 +1.
877 +11. How to recover the DLOS8N if the firmware crashes
878 +
851 851  Please follow this instruction to recover your gateway:
852 852  
853 853  [[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
854 854  
855 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
856 856  
884 +
885 +
886 +
887 +1.
888 +11. I configured DLOS8N for WiFi access and lost its IP. What to do now?
889 +
857 857  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image067.png]]
858 858  
859 859  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
... ... @@ -876,8 +876,10 @@
876 876  
877 877  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
878 878  
879 -= 11. Order Info =
880 880  
913 +
914 +1. Order Info
915 +
881 881  **//PART: DLOS8N-XXX-YYY//:**
882 882  
883 883  **//XXX: Frequency Band//**
... ... @@ -894,8 +894,11 @@
894 894  
895 895  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
896 896  
897 -= 12. Packing Info =
898 898  
933 +
934 +
935 +1. Packing Info
936 +
899 899  **Package Includes**:
900 900  
901 901  * DLOS8N LoRaWAN Gateway x 1
... ... @@ -909,9 +909,11 @@
909 909  * Package Size: 14.5 x 13.5 x 6 cm
910 910  * Weight: 300g
911 911  
912 -= 13. Support =
950 +1. Support
913 913  
914 914  * Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
915 915  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
916 916  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
917 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
955 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:
956 +
957 +[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652431153457-839.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1652431569353-626.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431588565-830.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431609193-637.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1652431650755-450.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1652435238615-272.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -68.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0