Last modified by Kilight Cao on 2025/03/17 17:02
<
From version < 205.1 >
edited by Kilight Cao
on 2024/09/21 09:44
To version < 191.2 >
edited by Xiaoling
on 2023/05/27 17:31
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  
9 9  
10 -**Table of Contents:**
10 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -94,7 +94,7 @@
94 94  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
95 95  * 70 dB CW interferer rejection at 1 MHz offset
96 96  * Able to operate with negative SNR, CCR up to 9dB
97 -* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
97 +* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
98 98  * Dual digital TX & RX radio front-end interfaces
99 99  * 10 programmable parallel demodulation paths
100 100  * Dynamic data-rate (DDR) adaptation
... ... @@ -119,6 +119,8 @@
119 119  * Isolation level 4 KVrms.
120 120  * Enhanced surge protection
121 121  
122 +
123 +
122 122  == 1.3 Features ==
123 123  
124 124  
... ... @@ -141,6 +141,8 @@
141 141  * Power Consumption:12v ,300-500mA
142 142  * Operating Temperature： -20~~85°C
143 143  
146 +
147 +
144 144  == 1.4 Hardware System Structure ==
145 145  
146 146  
... ... @@ -200,6 +200,7 @@
200 200  
201 201  DLOS8N use directional WiFi Antenna. The best direction is as below:
202 202  
207 +
203 203  [[image:1652412859663-161.png||height="341" width="333"]]
204 204  
205 205  
... ... @@ -219,6 +219,7 @@
219 219  
220 220  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
221 221  
227 +
222 222  [[image:1652413127647-377.png]]
223 223  
224 224  
... ... @@ -257,7 +257,7 @@
257 257  
258 258  
259 259  (((
260 -The WAN port also has a [[fall back ip address>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
266 +The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
261 261  )))
262 262  
263 263  
... ... @@ -299,11 +299,15 @@
299 299  * **WiFi AP Mode**
300 300  * **Cellular Mode**
301 301  
308 +
309 +
302 302  == 3.2 Use WAN port to access Internet ==
303 303  
304 304  
305 305  (((
306 306  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
315 +
316 +
307 307  )))
308 308  
309 309  [[image:image-20220916112129-1.png||height="414" width="887"]]
... ... @@ -319,11 +319,14 @@
319 319  (((
320 320  (((
321 321  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
332 +
333 +
322 322  )))
323 323  )))
324 324  
325 325  [[image:image-20220916142159-25.png||height="406" width="877"]](% style="display:none" %)
326 326  
339 +
327 327  (((
328 328  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
329 329  
... ... @@ -362,6 +362,8 @@
362 362  
363 363  (((
364 364  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
378 +
379 +
365 365  )))
366 366  
367 367  (((
... ... @@ -390,6 +390,8 @@
390 390  
391 391  (((
392 392  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
408 +
409 +
393 393  )))
394 394  
395 395  (((
... ... @@ -406,6 +406,8 @@
406 406  
407 407  (((
408 408  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
426 +
427 +
409 409  )))
410 410  
411 411  (((
... ... @@ -421,14 +421,17 @@
421 421  The example gateway id is: (% style="color:green" %)**a840411e96744154**
422 422  
423 423  
443 +
424 424  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
425 425  
426 426  
427 427  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
428 428  
449 +
429 429  [[image:1652422127479-258.png||height="346" width="738"]]
430 430  
431 431  
453 +
432 432  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
433 433  
434 434  
... ... @@ -446,6 +446,8 @@
446 446  * Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
447 447  * Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
448 448  
471 +
472 +
449 449  (% style="color:blue" %)**Step 4: Create a Gateway**
450 450  
451 451  
... ... @@ -470,6 +470,7 @@
470 470  
471 471  After creating the gateway, you can see the gateway info, as below.
472 472  
497 +
473 473  [[image:1657089571089-281.png]]
474 474  
475 475  
... ... @@ -486,6 +486,8 @@
486 486  
487 487  (((
488 488  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
514 +
515 +
489 489  )))
490 490  
491 491  [[image:1657089586062-302.png]]
... ... @@ -511,6 +511,7 @@
511 511  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
512 512  )))
513 513  
541 +
514 514  [[image:1652422737399-529.png||height="362" width="737"]]
515 515  
516 516  
... ... @@ -519,7 +519,7 @@
519 519   [[image:1652422763536-750.png||height="514" width="730"]]
520 520  
521 521  
522 -== (% data-sider-select-id="5bc80c23-9f00-4475-8de0-dc684ffabb7d" %)4.4 Add a LoRaWAN End Device(%%) ==
550 +== 4.4 Add a LoRaWAN End Device ==
523 523  
524 524  
525 525  (((
... ... @@ -633,10 +633,11 @@
633 633  
634 634  Shows the system running status.
635 635  
664 +
636 636  [[image:image-20220916113702-4.png||height="331" width="727"]]
637 637  
638 638  
639 -== (% data-sider-select-id="f01d6e3f-c35d-47d2-9a33-65fdc9b3a72e" %)5.2 LoRa Settings(%%) ==
668 +== 5.2 LoRa Settings ==
640 640  
641 641  === 5.2.1 LoRa ~-~-> LoRa ===
642 642  
... ... @@ -656,10 +656,13 @@
656 656  
657 657  
658 658  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
688 +
689 +
659 659  )))
660 660  
661 661  [[image:image-20220916114014-5.png||height="429" width="930"]]
662 662  
694 +
663 663  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
664 664  
665 665  
... ... @@ -675,21 +675,24 @@
675 675  
676 676  (((
677 677  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
710 +
711 +
678 678  )))
679 679  
680 680  [[image:image-20220916114346-7.png||height="363" width="886"]]
681 681  
682 682  
683 -== (% data-sider-select-id="e4f0e724-e454-4aa9-adc3-2d2fb381a93c" %)5.3 LoRaWAN Settings(%%) ==
717 +== 5.3 LoRaWAN Settings ==
684 684  
685 -=== (% data-sider-select-id="46832cd3-1415-4286-a897-1fbda6ed3a2a" %)5.3.1 LoRaWAN ~-~-> Semtech UDP(%%) ===
719 +=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
686 686  
687 687  
688 688  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
689 689  
690 -[[image:image-20240517101310-1.png||height="656" width="879"]]
691 691  
725 +[[image:image-20220916114929-8.png||height="716" width="871"]]
692 692  
727 +
693 693  (% style="color:red" %)**Note:**
694 694  
695 695  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
... ... @@ -713,6 +713,7 @@
713 713  * Introduction to using with [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.SemtechBasicStation]].
714 714  * Introduction to using with [[Actility Thingpark Enterprise>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Actility%20ThingPark%20Enterprise/]].
715 715  
751 +
716 716  
717 717  )))
718 718  
... ... @@ -725,12 +725,14 @@
725 725  
726 726  (((
727 727  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
764 +
765 +
728 728  )))
729 729  
730 730  [[image:image-20220916115143-9.png||height="314" width="858"]]
731 731  
732 732  
733 -== (% data-sider-select-id="30ceca0a-d0e8-4382-ac5a-59bebcb19c51" %)5.4 MQTT Settings(%%) ==
771 +== 5.4 MQTT Settings ==
734 734  
735 735  
736 736  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -737,125 +737,99 @@
737 737  
738 738  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
739 739  
778 +
740 740  [[image:1657090037148-906.png]]
741 741  
742 742  
743 -== 5.5  Network ==
782 +== 5.5 System ==
744 744  
745 -=== 5.5.1  Network ~-~-> Network Status ===
784 +=== 5.5.1 System ~-~-> System Overview ===
746 746  
747 747  
748 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
787 +Shows the system info:
749 749  
750 750  
751 -(% data-sider-select-id="5ec9b41d-26fb-4b6f-8f48-4c2f2c564c53" %)
752 -=== 5.5.2  Network ~-~-> Network ===
790 +[[image:image-20220916133758-10.png||height="611" width="865"]]
753 753  
754 754  
793 +=== 5.5.2 System ~-~-> General ( login settings) ===
794 +
795 +
796 +[[image:image-20220916134411-11.png||height="505" width="875"]]
797 +
798 +
755 755  (((
756 -(% data-sider-select-id="80d07254-c65e-47a2-86b6-8e6220924c25" %)
757 -(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
800 +(% style="color:#037691" %)**__System Password:__**
758 758  )))
759 759  
760 760  (((
761 -(% data-sider-select-id="d9954e50-7f68-4249-b699-61f53219fb57" %)
762 -(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for DLOS8N WAN port
804 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
763 763  )))
764 764  
765 765  (((
766 -(% data-sider-select-id="c87bbc6b-c98a-416d-a0a1-03f1ed827688" %)
767 -(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
808 +This page can be used to set the password for them.
768 768  )))
769 769  
770 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
811 +(((
812 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
813 +)))
771 771  
815 +(((
816 +(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
772 772  
773 -=== 5.5.3  Network ~-~-> WiFi ===
818 +
819 +)))
774 774  
821 +=== 5.5.3 System ~-~-> Network ===
775 775  
776 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
777 -DLOS8N WiFi Settings.
778 778  
779 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
780 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
824 +[[image:image-20220916134642-12.png||height="417" width="886"]]
781 781  
782 782  
783 -=== 5.5.4  Network ~-~-> Cellular ===
784 -
785 -
786 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
787 -
788 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
789 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
790 -
791 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
792 -(% data-sider-select-id="1470493c-3c33-42a0-89eb-132d9554b028" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
793 -
794 -
795 -== (% data-sider-select-id="b34f40d0-e802-4e45-8a8c-6620e692699e" %)5.6 System(%%) ==
796 -
797 -=== (% data-sider-select-id="0d466e95-c71d-43c8-9e78-cc547eea894f" %)5.6.1 System ~-~-> System Overview(%%) ===
798 -
799 -
800 -Shows the system info:
801 -
802 -[[image:image-20220916133758-10.png||height="611" width="865"]]
803 -
804 -
805 -=== (% data-sider-select-id="dfb74220-f4d5-45ee-89d6-758b065fd447" %)5.6.2 System ~-~-> General ( login settings)(%%) ===
806 -
807 -
808 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png"]]
809 -
810 810  (((
811 -
812 -
813 -(% data-sider-select-id="be43359c-6dc0-4f21-a3e8-95fb8b9622d4" %)
814 -There are two login for DLOS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
828 +(% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
815 815  )))
816 816  
817 817  (((
818 -This page can be used to set the password for them.
832 +(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
819 819  )))
820 820  
821 821  (((
822 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
836 +(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
837 +
838 +
823 823  )))
824 824  
825 -(((
826 -(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
827 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
841 +=== 5.5.4 System ~-~-> WiFi ===
828 828  
829 -(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
830 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
831 831  
832 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
844 +DLOS8N WiFi Settings.
833 833  
834 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
835 835  
836 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
837 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
847 +[[image:image-20220916134831-13.png||height="426" width="909"]](% style="display:none" %)
838 838  
839 839  
840 -=== 5.6.3 System ~-~-> Backup/Restore Config ===
850 +=== 5.5.5 System ~-~-> Cellular ===
841 841  
842 842  
843 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
853 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
844 844  
845 845  
846 -=== 5.6.4 System ~-~-> Remote.it ===
856 +[[image:image-20220916135100-14.png||height="364" width="917"]]
847 847  
848 848  
849 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
859 +(% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
850 850  
851 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
852 852  
853 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
862 +=== 5.5.6 System ~-~-> Network Status ===
854 854  
855 855  
856 -=== (% data-sider-select-id="730a4b6f-6adf-4db6-bccf-f911bfed1354" %)5.6.5 System ~-~-> Remote Mgnt & Auto Provision(%%) ===
865 +[[image:image-20220916135207-15.png||height="630" width="926"]]
857 857  
858 858  
868 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
869 +
870 +
859 859  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
860 860  
861 861  
... ... @@ -878,7 +878,7 @@
878 878  [[image:image-20220916140017-16.png||height="619" width="911"]]
879 879  
880 880  
881 -=== (% data-sider-select-id="a2b72367-c22f-4274-9fe5-109ef8008b8e" %)5.6.6 System ~-~-> Firmware Upgrade(%%) ===
893 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
882 882  
883 883  
884 884  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -923,7 +923,7 @@
923 923  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
924 924  
925 925  
926 -=== (% data-sider-select-id="07bc9f06-7099-42c0-964c-149f601f3627" %)5.6.7 System ~-~-> Reboot/Reset(%%) ===
938 +=== 5.5.9 System ~-~-> Reboot/Reset ===
927 927  
928 928  
929 929  [[image:image-20220916140312-18.png||height="286" width="909"]]
... ... @@ -932,86 +932,47 @@
932 932  
933 933  )))
934 934  
935 -=== (% data-sider-select-id="2ceda713-1253-4788-9e11-0dd9d81977b3" %)5.6.8 System ~-~-> Package Maintain(%%) ===
947 +=== 5.5.10 System ~-~-> Package Maintain ===
936 936  
937 937  
938 938  [[image:image-20220916140421-19.png||height="715" width="904"]]
939 939  
952 +
940 940  Place to show what package has installed and possible to upgrade packages.
941 941  
942 942  
943 -== (% data-sider-select-id="79337028-35c7-4229-a401-04b91f009ce3" %)5.7 LogRead(%%) ==
956 +== 5.6 LogRead ==
944 944  
945 -=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
958 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
946 946  
947 947  (% style="display:none" %) (%%)
948 948  
949 -(% data-sider-select-id="b7ed19c4-acf7-4583-9e50-5cd99c4cdeae" %)
950 -Show the frequency for LoRa Radio:
962 +Show the frequency for LoRa Radio and traffics.
951 951  
964 +
952 952  [[image:image-20220916140549-20.png||height="729" width="877"]]
953 953  
954 954  
968 +=== 5.6.2 LogRead ~-~-> System Log ===
955 955  
956 -=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
957 957  
958 -
959 -(% data-sider-select-id="e9787126-554a-4bb4-8f31-ab2ce0e55165" %)
960 -Show the gateway traffic:
961 -
962 -[[image:image-20240416112159-1.png||height="610" width="872"]]
963 -
964 -=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.3 LogRead ~-~-> System Log(%%) ===
965 -
966 -
967 967  Show the system log
968 968  
973 +
969 969  [[image:image-20220916140732-21.png||height="710" width="872"]]
970 970  
971 971  
972 -=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.4 LogRead ~-~-> (%%)Record Log(% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %) (%%) ===
977 += 6. More features =
973 973  
979 +== 6.1 Packet Filtering ==
974 974  
975 -This interface can record gateway logs:
976 976  
977 -[[image:image-20240416112510-2.png||height="296" width="870"]]
978 -
979 -= (% data-sider-select-id="53575777-5441-4a56-84e2-d3a229a8ece3" %)6. More features(%%) =
980 -
981 -
982 -== (% data-sider-select-id="2ef025e3-4214-4b1c-bb01-ee03e1db2bc2" %)6.1 NTP Service/Time Synchronization(%%) ==
983 -
984 -The gateway time sync service is provided by ntpd
985 -
986 -=== 1). Modify the NTP server address: ===
987 -
988 -(% class="box" %)
989 -(((
990 -~#~##Linux command
991 -
992 -uci set system.ntp.server='0.openwrt.pool.ntp.org'  #Required
993 -
994 -uci add_list system.ntp.server='1.openwrt.pool.ntp.org' #Optional
995 -
996 -uci add_list system.ntp.server='2.openwrt.pool.ntp.org' #Optional
997 -
998 -uci add_list system.ntp.server='3.openwrt.pool.ntp.org'  #Optional
999 -
1000 -uci commit system #Required
1001 -)))
1002 -
1003 -**Note: If the NTP server is a Windows host, it may cause the time synchronization to fail, **
1004 -
1005 -
1006 -== (% data-sider-select-id="68c5d9c8-0690-4e39-abae-0a921c179211" %)6.2 Packet Filtering(%%) ==
1007 -
1008 -
1009 1009  Drop unwanted packets.
1010 1010  
1011 1011  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
1012 1012  
1013 1013  
1014 -== (% data-sider-select-id="6b98cd6d-f2db-4647-ae38-aee4a3d7227b" %)6.3 Remote Access(%%) ==
987 +== 6.2 Remote Access ==
1015 1015  
1016 1016  
1017 1017  Remote Access Devices for management.
... ... @@ -1019,7 +1019,7 @@
1019 1019  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
1020 1020  
1021 1021  
1022 -== (% data-sider-select-id="8084465c-aa6f-4536-b97d-383cd952e46c" %)6.4 How to decode ABP LoRaWAN node(%%) ==
995 +== 6.3 How to decode ABP LoRaWAN node ==
1023 1023  
1024 1024  
1025 1025  Decode ABP:
... ... @@ -1027,7 +1027,7 @@
1027 1027  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
1028 1028  
1029 1029  
1030 -== (% data-sider-select-id="a4a3d7bb-c435-47b3-a926-46788a4f9e6f" %)6.5 How to set data to MQTT broker(%%) ==
1003 +== 6.4 How to set data to MQTT broker ==
1031 1031  
1032 1032  
1033 1033  Only support ABP LoRaWAN End Node
... ... @@ -1035,7 +1035,7 @@
1035 1035  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1036 1036  
1037 1037  
1038 -== (% data-sider-select-id="0074e70a-5030-4401-916c-b12bd0557d05" %)6.6 How the gateway connects to Chirpstack v3/v4 via gateway-bridge(%%) ==
1011 +== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1039 1039  
1040 1040  
1041 1041  If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
... ... @@ -1056,142 +1056,10 @@
1056 1056  
1057 1057  After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1058 1058  
1059 -(% data-sider-select-id="eb4b3bf2-9e33-4650-b4d6-1bc049896baa" %)
1060 -== (% data-sider-select-id="e5ea7147-f618-4c9a-b8f9-e108ee76b9da" %)6.7  (% data-sider-select-id="1ae6690c-7910-44d5-999b-cd3b05be575f" %)How does the gateway connect to (% data-sider-select-id="e5ea7147-f618-4c9a-b8f9-e108ee76b9da" %)Chirpstack(% data-sider-select-id="1ae6690c-7910-44d5-999b-cd3b05be575f" %) via MQTT Forwarder(%%) ==
1061 1061  
1033 +== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1062 1062  
1063 -(% data-sider-select-id="33f2a7a8-cb1a-4c53-bd5b-716d3cc3d74f" %)
1064 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
1065 1065  
1066 -
1067 -(% data-sider-select-id="73a14e4a-5128-4f13-8207-7837c412ff54" %)
1068 -=== 6.7.1 Configure Packet Forwarder ===
1069 -
1070 -
1071 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
1072 -
1073 -(% data-sider-select-id="2972d256-3078-403f-9e33-3740a5869405" %)
1074 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="a9e64ab2-7a80-4174-b834-dba4904e3c85" %)**https:~/~/GATEWAY-IP-ADDRESS:8000**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are (% data-sider-select-id="16f9bbed-ffd7-4881-9cd1-33332f063857" %)**root / dragino**(%%).
1075 -
1076 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
1077 -* Configure the following settings:
1078 -** **Service Provider:** //Custom / Private LoRaWAN//
1079 -** **Server Address:** //localhost//
1080 -** **Uplink Port:** //1700//
1081 -** **Downlink Port:** //1700//
1082 -* Click **Save&Apply**
1083 -
1084 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518114149-2.png?width=876&height=683&rev=1.1||alt="image-20240518114149-2.png"]]
1085 -
1086 -(% data-sider-select-id="7ada6cd9-b472-473e-b709-31db23947a9c" %)
1087 -=== 6.7.2 Install ChirpStack MQTT Forwarder ===
1088 -
1089 -
1090 -(% data-sider-select-id="cd761ad9-41f8-4cc3-8dc8-cf25ebe79e69" %)
1091 -(% data-sider-select-id="74577a45-a26e-4ab8-b56c-2ba79220e6c6" %)**SSH login**
1092 -
1093 -(% data-sider-select-id="f4b22a8a-3b87-4cc7-b4ed-451fdd8aa9a7" %)
1094 -First user must login into the gateway using SSH,user can refer to the link to access the Linux console via SSH to the gateway: **[[SSH Access for Linux console>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/#H7.LinuxSystem||data-sider-select-id="27b6862a-68e4-4f69-a5b2-b33d8a06a09c"]]**
1095 -
1096 -
1097 -(% data-sider-select-id="e9c9429f-f7c4-4eb3-b3f4-99553fe741b0" %)
1098 -(% data-sider-select-id="83ee7071-3524-45ba-99b2-9f3472815cd8" %)**Download IPK**
1099 -
1100 -Use the following commands to download the latest version of the chirpstack-mqtt-forwarder package:
1101 -
1102 -(% class="box infomessage" data-sider-select-id="b970d0e5-64ca-47c8-8c9c-6261200a719f" %)
1103 -(((
1104 -cd /tmp
1105 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/vendor/dragino/mips_24kc/chirpstack-mqtt-forwarder_4.3.0-r1_mips_24kc.ipk
1106 -)))
1107 -
1108 -
1109 -(% data-sider-select-id="27190188-ef2a-4d53-8b94-c4653b69b266" %)
1110 -(% data-sider-select-id="3fe3ef50-33b9-4c6b-b228-7364e01382f3" %)**Install IPK**
1111 -
1112 -Use the opkg package-manager to install the downloaded package. Example:
1113 -
1114 -(% class="box infomessage" data-sider-select-id="86f1197c-5aaf-4a1b-a21f-09266a2805e7" %)
1115 -(((
1116 -opkg install chirpstack-mqtt-forwarder_4.3.0-r1_mips_24kc.ipk
1117 -)))
1118 -
1119 -
1120 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518134824-5.png?rev=1.1||alt="image-20240518134824-5.png"]]
1121 -
1122 -(% data-sider-select-id="e8065348-1a8e-45a9-bb73-171b9322d2b2" %)
1123 -(% data-sider-select-id="e9401e38-e30d-4c39-94fa-927c9a40e151" %)**Configuration**
1124 -
1125 -(% data-sider-select-id="2a70737e-070b-4a83-a474-2fef1076a006" %)
1126 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1127 -
1128 -(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1129 -This file is located at: (% data-sider-select-id="b010c8b8-6367-49bf-9c2e-3ee0b8a6ef0e" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1130 -
1131 -
1132 -(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1133 -(% data-sider-select-id="fab61fd5-2c9f-4b72-9b65-457dca26cbd0" %)**ChirpStack MQTT Forwarder Setting:**
1134 -
1135 -(% class="box" data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1136 -(((
1137 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1138 -
1139 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1140 -)))
1141 -
1142 -(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1143 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1144 -
1145 -
1146 -Use commands to modify configuration files:
1147 -
1148 -(% class="box infomessage" data-sider-select-id="b84cf72d-69e4-441c-a8fb-bd21a500d223" %)
1149 -(((
1150 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1151 -)))
1152 -
1153 -
1154 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1155 -
1156 -(% data-sider-select-id="3312b6d5-334c-43ae-8cd9-2f73989940e2" %)
1157 -(% data-sider-select-id="2b334f7c-35d3-4771-8b17-5760685430ac" %)**(Re)start and stop commands**
1158 -
1159 -(% data-sider-select-id="b8175b05-70b1-4251-97a1-8c0b2644e4d4" %)
1160 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1161 -
1162 -(% class="box infomessage" data-sider-select-id="fc0e9684-3620-4f52-8045-9f6b7dd083e3" %)
1163 -(((
1164 -# start
1165 -
1166 -(% data-sider-select-id="5a644c5c-1ca5-4680-877e-c6aecd21f9de" %)
1167 -/etc/init.d/chirpstack-mqtt-forwarder start
1168 -
1169 -# stop
1170 -
1171 -/etc/init.d/chirpstack-mqtt-forwarder stop
1172 -
1173 -# restart
1174 -
1175 -/etc/init.d/chirpstack-mqtt-forwarder restart
1176 -)))
1177 -
1178 -(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1179 -(% data-sider-select-id="fcef88f4-ef44-4459-9154-6cd154c5b298" %)**Check result**
1180 -
1181 -(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1182 -Use "(% data-sider-select-id="494c67e8-3e62-45ee-8464-e2bb33057003" %)** **(%%)​​​​​(% data-sider-select-id="494c67e8-3e62-45ee-8464-e2bb33057003" style="background-color:yellow" %)**logread -f **(%%)" to check the operation of ChirpStack MQTT Forwarder.[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518142300-7.png?rev=1.1||alt="image-20240518142300-7.png"]]
1183 -
1184 -
1185 -(% data-sider-select-id="a4ab5ddc-dbfe-4c41-ac6e-6159b517d02f" %)
1186 -Go back to the Chirpstack server to check whether the gateway is (% data-sider-select-id="0689bd86-c7a8-4831-b064-d1c4ed6241e5" %)**"online"**(%%) and whether the packets are displayed normally.
1187 -
1188 -
1189 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1190 -
1191 -
1192 -== (% data-sider-select-id="c6cadb28-a27e-4499-92bb-189a644b8fda" %)6.8  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive).(%%) ==
1193 -
1194 -
1195 1195  USB card reader plugged into the USB port of the gateway.
1196 1196  
1197 1197  Access the gateway Linux Command Line.
... ... @@ -1224,7 +1224,7 @@
1224 1224  [[image:image-20230425173831-3.png||height="105" width="833"]]
1225 1225  
1226 1226  
1227 -== (% data-sider-select-id="2f4b3d14-0080-4223-bc52-d74facde85a6" %)6.9  How to view DLOS8N GPS information(%%) ==
1068 +== 6.7 How to view DLOS8N GPS information ==
1228 1228  
1229 1229  
1230 1230  By default, when the DLOS8N GPS positioning is complete, it will be displayed in the state package on the **LogRead ~-~-> System Log**  interface.
... ... @@ -1237,7 +1237,7 @@
1237 1237  [[image:image-20230508134603-2.png||height="435" width="927"]]
1238 1238  
1239 1239  
1240 -== (% data-sider-select-id="9c733551-ff43-41d9-9c06-2a6157a6b46f" %)6.10  More instructions(%%) ==
1081 +== 6.8  More instructions ==
1241 1241  
1242 1242  
1243 1243  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
... ... @@ -1549,6 +1549,8 @@
1549 1549  
1550 1550  
1551 1551  As below photo:
1393 +
1394 +
1552 1552  )))
1553 1553  
1554 1554  [[image:1652435256286-879.png]]
... ... @@ -1560,17 +1560,6 @@
1560 1560  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1561 1561  
1562 1562  
1563 -(% data-sider-select-id="f9e9779e-261d-4a53-9ba6-a4d1c45cec19" %)
1564 -== 11.4  Why does the gateway reboot every 15 minutes without Internet? ==
1565 -
1566 -(% data-sider-select-id="77a3f493-29a0-4e57-a8ac-cd19e74d463d" %)
1567 -Check whether Internet Detect is enabled on the (% data-sider-select-id="98a5126a-698d-4dc1-af3b-b62ed09b2db0" %)**System~-~->General**(%%) interface.
1568 -
1569 -Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1570 -
1571 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1572 -
1573 -
1574 1574  = 12. Order Info =
1575 1575  
1576 1576  
... ... @@ -1583,10 +1583,10 @@
1583 1583  
1584 1584  (% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1585 1585  
1586 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1587 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1588 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1589 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1418 +* (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1419 +* (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1420 +* (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1421 +* (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1590 1590  
1591 1591  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1592 1592  
... ... @@ -1623,4 +1623,3 @@
1623 1623  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1624 1624  
1625 1625  
1626 -)))
image-20240416112159-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -161.4 KB
Content
image-20240416112510-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.3 KB
Content
image-20240517101310-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0