Last modified by Kilight Cao on 2025/03/20 16:02
<
From version < 198.1 >
edited by Kilight Cao
on 2024/04/19 15:29
To version < 171.2 >
edited by Xiaoling
on 2022/11/04 17:46
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  
9 9  
10 -**Table of Contents:**
10 +**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -20,19 +20,20 @@
20 20  
21 21  = 1. Introduction =
22 22  
23 +
23 23  == 1.1 What is the DLOS8N ==
24 24  
25 25  
26 26  (((
27 -The DLOS8N is an** (% style="color:blue" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:blue" %). (%%)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
28 +The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
28 28  )))
29 29  
30 30  (((
31 -DLOS8N supports (% style="color:blue" %)**Semtech packet forwarder** (%%)and (% style="color:blue" %)**LoRaWAN Station connection**, (%%)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator.**
32 +DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
32 32  )))
33 33  
34 34  (((
35 -DLOS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands** (%%)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
36 +DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,7 +40,7 @@
40 40  )))
41 41  
42 42  (((
43 -DLOS8N supports (% style="color:blue" %)**auto-provision** (%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
44 +DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
44 44  
45 45  
46 46  )))
... ... @@ -48,6 +48,7 @@
48 48  [[image:1652411526195-923.png||height="494" width="731"]]
49 49  
50 50  
52 +
51 51  == 1.2 Specifications ==
52 52  
53 53  
... ... @@ -94,7 +94,7 @@
94 94  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
95 95  * 70 dB CW interferer rejection at 1 MHz offset
96 96  * Able to operate with negative SNR, CCR up to 9dB
97 -* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
99 +* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
98 98  * Dual digital TX & RX radio front-end interfaces
99 99  * 10 programmable parallel demodulation paths
100 100  * Dynamic data-rate (DDR) adaptation
... ... @@ -119,6 +119,8 @@
119 119  * Isolation level 4 KVrms.
120 120  * Enhanced surge protection
121 121  
124 +
125 +
122 122  == 1.3 Features ==
123 123  
124 124  
... ... @@ -126,7 +126,6 @@
126 126  * Managed by Web GUI, SSH via LAN or WiFi
127 127  * Support Semtech UDP packet forwarder
128 128  * Support LoRaWAN Station Connection
129 -* Support MQTTS
130 130  * Cellular Failover conntection(option)
131 131  * Direct Communication to LoRaWAN ABP Node
132 132  * LoRaWAN packet filtering
... ... @@ -139,8 +139,9 @@
139 139  * IP65
140 140  * Lighting Protection
141 141  * Power Consumption:12v ,300-500mA
142 -* Operating Temperature： -20~~85°C
143 143  
146 +
147 +
144 144  == 1.4 Hardware System Structure ==
145 145  
146 146  
... ... @@ -147,6 +147,7 @@
147 147  [[image:image-20220907154423-1.png]]
148 148  
149 149  
154 +
150 150  == 1.5 DLOS8N Applications ==
151 151  
152 152  
... ... @@ -153,6 +153,7 @@
153 153  [[image:image-20220916144221-26.png]]
154 154  
155 155  
161 +
156 156  == 1.6 LED Indicators ==
157 157  
158 158  
... ... @@ -173,36 +173,23 @@
173 173  )))
174 174  * (((
175 175  (% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn't have Internet connection.
176 -
177 177  
183 +
184 +
178 178  
179 179  )))
180 180  )))
181 181  
182 -== 1.7 Button Instruction ==
189 +== 1.7 WiFi Direction ==
183 183  
184 184  
185 -DLOS8N has a black toggle button, which is:
186 -
187 -
188 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
189 -
190 - **LED status: ** LED will BLINKING GREEN Until the reload is finished.
191 -
192 -
193 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
194 -
195 - **LED status: ** When the user releases the button, the LED will TURN OFF.
196 -
197 -
198 -== 1.8 WiFi Direction ==
199 -
200 -
201 201  DLOS8N use directional WiFi Antenna. The best direction is as below:
202 202  
194 +
203 203  [[image:1652412859663-161.png||height="341" width="333"]]
204 204  
205 205  
198 +
206 206  = 2. Access and Configure DLOS8N =
207 207  
208 208  
... ... @@ -209,8 +209,10 @@
209 209  The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
210 210  
211 211  
205 +
212 212  == 2.1 Find IP address of DLOS8N ==
213 213  
208 +
214 214  === 2.1.1 Connect via WiFi ===
215 215  
216 216  
... ... @@ -219,6 +219,7 @@
219 219  
220 220  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
221 221  
217 +
222 222  [[image:1652413127647-377.png]]
223 223  
224 224  
... ... @@ -227,6 +227,7 @@
227 227  (((
228 228  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)**10.130.1.1**
229 229  
226 +
230 230  
231 231  )))
232 232  
... ... @@ -241,6 +241,7 @@
241 241  Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
242 242  )))
243 243  
241 +
244 244  
245 245  )))
246 246  
... ... @@ -253,14 +253,16 @@
253 253  If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
254 254  
255 255  
254 +
256 256  === 2.1.4 Connect via Ethernet with fall back ip ===
257 257  
258 258  
259 259  (((
260 -The WAN port also has a [[fall back ip address>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
259 +The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
261 261  )))
262 262  
263 263  
263 +
264 264  == 2.2 Access Configure Web UI ==
265 265  
266 266  
... ... @@ -287,8 +287,10 @@
287 287  [[image:1652414287022-223.png]]
288 288  
289 289  
290 +
290 290  = 3. Typical Network Setup =
291 291  
293 +
292 292  == 3.1 Overview ==
293 293  
294 294  
... ... @@ -299,16 +299,21 @@
299 299  * **WiFi AP Mode**
300 300  * **Cellular Mode**
301 301  
304 +
305 +
302 302  == 3.2 Use WAN port to access Internet ==
303 303  
304 304  
305 305  (((
306 306  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
311 +
312 +
307 307  )))
308 308  
309 309  [[image:image-20220916112129-1.png||height="414" width="887"]]
310 310  
311 311  
318 +
312 312  == 3.3 Access the Internet as a WiFi Client ==
313 313  
314 314  
... ... @@ -319,14 +319,18 @@
319 319  (((
320 320  (((
321 321  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
329 +
330 +
322 322  )))
323 323  )))
324 324  
325 325  [[image:image-20220916142159-25.png||height="406" width="877"]](% style="display:none" %)
326 326  
336 +
327 327  (((
328 328  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
329 329  
340 +
330 330  
331 331  )))
332 332  
... ... @@ -362,6 +362,8 @@
362 362  
363 363  (((
364 364  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
376 +
377 +
365 365  )))
366 366  
367 367  (((
... ... @@ -373,6 +373,7 @@
373 373  (% style="color:red" %)**Note** ***: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.**
374 374  
375 375  
389 +
376 376  == 3.5 Check Internet connection ==
377 377  
378 378  
... ... @@ -381,15 +381,19 @@
381 381  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
382 382  * Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
383 383  * RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
398 +*
384 384  
385 385  [[image:image-20220916112620-2.png||height="384" width="872"]](% style="display:none" %)
386 386  
387 387  
403 +
388 388  = 4. Example: Configure as a LoRaWAN gateway =
389 389  
390 390  
391 391  (((
392 392  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
409 +
410 +
393 393  )))
394 394  
395 395  (((
... ... @@ -401,11 +401,14 @@
401 401  TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
402 402  
403 403  
422 +
404 404  == 4.1 Create a gateway in TTN V3 Server ==
405 405  
406 406  
407 407  (((
408 408  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
428 +
429 +
409 409  )))
410 410  
411 411  (((
... ... @@ -421,14 +421,17 @@
421 421  The example gateway id is: (% style="color:green" %)**a840411e96744154**
422 422  
423 423  
445 +
424 424  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
425 425  
426 426  
427 427  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
428 428  
451 +
429 429  [[image:1652422127479-258.png||height="346" width="738"]]
430 430  
431 431  
455 +
432 432  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
433 433  
434 434  
... ... @@ -446,6 +446,8 @@
446 446  * Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
447 447  * Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
448 448  
473 +
474 +
449 449  (% style="color:blue" %)**Step 4: Create a Gateway**
450 450  
451 451  
... ... @@ -470,9 +470,11 @@
470 470  
471 471  After creating the gateway, you can see the gateway info, as below.
472 472  
499 +
473 473  [[image:1657089571089-281.png]]
474 474  
475 475  
503 +
476 476  == 4.2 Configure DLOS8N to connect to TTN v3 ==
477 477  
478 478  
... ... @@ -486,6 +486,8 @@
486 486  
487 487  (((
488 488  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
517 +
518 +
489 489  )))
490 490  
491 491  [[image:1657089586062-302.png]]
... ... @@ -504,6 +504,7 @@
504 504  [[image:1657089753667-298.png]]
505 505  
506 506  
537 +
507 507  == 4.3 Configure frequency ==
508 508  
509 509  
... ... @@ -511,6 +511,7 @@
511 511  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
512 512  )))
513 513  
545 +
514 514  [[image:1652422737399-529.png||height="362" width="737"]]
515 515  
516 516  
... ... @@ -519,6 +519,7 @@
519 519   [[image:1652422763536-750.png||height="514" width="730"]]
520 520  
521 521  
554 +
522 522  == 4.4 Add a LoRaWAN End Device ==
523 523  
524 524  
... ... @@ -626,18 +626,23 @@
626 626  [[image:1657089884131-489.png]]
627 627  
628 628  
662 +
629 629  = 5. Web Configure Pages =
630 630  
665 +
631 631  == 5.1 Home ==
632 632  
633 633  
634 634  Shows the system running status.
635 635  
671 +
636 636  [[image:image-20220916113702-4.png||height="331" width="727"]]
637 637  
638 638  
675 +
639 639  == 5.2 LoRa Settings ==
640 640  
678 +
641 641  === 5.2.1 LoRa ~-~-> LoRa ===
642 642  
643 643  
... ... @@ -656,13 +656,17 @@
656 656  
657 657  
658 658  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
697 +
698 +
659 659  )))
660 660  
661 661  [[image:image-20220916114014-5.png||height="429" width="930"]]
662 662  
703 +
663 663  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
664 664  
665 665  
707 +
666 666  === 5.2.2 LoRa ~-~-> ABP Decryption ===
667 667  
668 668  
... ... @@ -675,18 +675,23 @@
675 675  
676 676  (((
677 677  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
720 +
721 +
678 678  )))
679 679  
680 680  [[image:image-20220916114346-7.png||height="363" width="886"]]
681 681  
682 682  
727 +
683 683  == 5.3 LoRaWAN Settings ==
684 684  
730 +
685 685  === 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
686 686  
687 687  
688 688  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
689 689  
736 +
690 690  [[image:image-20220916114929-8.png||height="716" width="871"]]
691 691  
692 692  
... ... @@ -699,20 +699,17 @@
699 699  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
700 700  
701 701  
702 -=== 5.3.2 LoRaWAN ~-~-> Basic Station ===
703 703  
750 +=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
704 704  
705 -[[image:image-20230415172432-1.png||height="461" width="868"]]
706 706  
707 -Introduction for the use of LoRaWAN Basic for different servers:
753 +[[image:1657089933044-221.png]]
708 708  
755 +
709 709  (((
710 -* Introduction to using with [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]].
711 -* Introduction to using with [[TTN>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.GatewayRegistrationforBasicsStation]].
712 -* Introduction to using with [[ChirpStack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.GatewayRegistrationforBasicsStation]].
713 -* Introduction to using with [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.SemtechBasicStation]].
714 -* Introduction to using with [[Actility Thingpark Enterprise>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Actility%20ThingPark%20Enterprise/]].
757 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
715 715  
759 +
716 716  
717 717  )))
718 718  
... ... @@ -725,137 +725,122 @@
725 725  
726 726  (((
727 727  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
772 +
773 +
728 728  )))
729 729  
730 730  [[image:image-20220916115143-9.png||height="314" width="858"]]
731 731  
732 732  
733 -== (% data-sider-select-id="30ceca0a-d0e8-4382-ac5a-59bebcb19c51" %)5.4 MQTT Settings(%%) ==
734 734  
780 +== 5.4 MQTT Settings ==
735 735  
782 +
736 736  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
737 737  
738 738  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
739 739  
787 +
740 740  [[image:1657090037148-906.png]]
741 741  
742 742  
743 -== 5.5  Network ==
744 744  
745 -=== 5.5.1  Network ~-~-> Network Status ===
792 +== 5.5 System ==
746 746  
747 747  
748 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
795 +=== 5.5.1 System ~-~-> System Overview ===
749 749  
750 750  
751 -(% data-sider-select-id="5ec9b41d-26fb-4b6f-8f48-4c2f2c564c53" %)
752 -=== 5.5.2  Network ~-~-> Network ===
798 +Shows the system info:
753 753  
754 754  
755 -(((
756 -(% data-sider-select-id="80d07254-c65e-47a2-86b6-8e6220924c25" %)
757 -(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
758 -)))
801 +[[image:image-20220916133758-10.png||height="611" width="865"]]
759 759  
760 -(((
761 -(% data-sider-select-id="d9954e50-7f68-4249-b699-61f53219fb57" %)
762 -(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for DLOS8N WAN port
763 -)))
764 764  
765 -(((
766 -(% data-sider-select-id="c87bbc6b-c98a-416d-a0a1-03f1ed827688" %)
767 -(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
768 -)))
769 769  
770 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
805 +=== 5.5.2 System ~-~-> General ( login settings) ===
771 771  
772 772  
773 -=== 5.5.3  Network ~-~-> WiFi ===
808 +[[image:image-20220916134411-11.png||height="505" width="875"]]
774 774  
775 775  
776 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
777 -DLOS8N WiFi Settings.
811 +(((
812 +(% style="color:#037691" %)**__System Password:__**
813 +)))
778 778  
779 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
780 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
815 +(((
816 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
817 +)))
781 781  
819 +(((
820 +This page can be used to set the password for them.
821 +)))
782 782  
783 -=== 5.5.4  Network ~-~-> Cellular ===
823 +(((
824 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
825 +)))
784 784  
827 +(((
828 +(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
785 785  
786 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
787 787  
788 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
789 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
831 +
832 +)))
790 790  
791 -(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
792 -(% data-sider-select-id="1470493c-3c33-42a0-89eb-132d9554b028" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
834 +=== 5.5.3 System ~-~-> Network ===
793 793  
794 794  
795 -== (% data-sider-select-id="b34f40d0-e802-4e45-8a8c-6620e692699e" %)5.6 System(%%) ==
837 +[[image:image-20220916134642-12.png||height="417" width="886"]]
796 796  
797 -=== (% data-sider-select-id="0d466e95-c71d-43c8-9e78-cc547eea894f" %)5.6.1 System ~-~-> System Overview(%%) ===
798 798  
840 +(((
841 +(% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
842 +)))
799 799  
800 -Shows the system info:
844 +(((
845 +(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
846 +)))
801 801  
802 -[[image:image-20220916133758-10.png||height="611" width="865"]]
848 +(((
849 +(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
803 803  
804 804  
805 -=== (% data-sider-select-id="dfb74220-f4d5-45ee-89d6-758b065fd447" %)5.6.2 System ~-~-> General ( login settings)(%%) ===
852 +
853 +)))
806 806  
855 +=== 5.5.4 System ~-~-> WiFi ===
807 807  
808 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png"]]
809 809  
810 -(((
811 -
858 +DLOS8N WiFi Settings.
812 812  
813 -(% data-sider-select-id="be43359c-6dc0-4f21-a3e8-95fb8b9622d4" %)
814 -There are two login for DLOS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
815 -)))
816 816  
817 -(((
818 -This page can be used to set the password for them.
819 -)))
861 +[[image:image-20220916134831-13.png||height="426" width="909"]](% style="display:none" %)
820 820  
821 -(((
822 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
823 -)))
824 824  
825 -(((
826 -(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
827 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
828 828  
829 -(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
830 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
865 +=== 5.5.5 System ~-~-> Cellular ===
831 831  
832 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
833 833  
834 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
868 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
835 835  
836 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
837 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
838 838  
871 +[[image:image-20220916135100-14.png||height="364" width="917"]]
839 839  
840 -=== 5.6.3 System ~-~-> Backup/Restore Config ===
841 841  
874 +(% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
842 842  
843 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
844 844  
845 845  
846 -=== 5.6.4 System ~-~-> Remote.it ===
878 +=== 5.5.6 System ~-~-> Network Status ===
847 847  
848 848  
849 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
881 +[[image:image-20220916135207-15.png||height="630" width="926"]]
850 850  
851 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
852 852  
853 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
854 854  
885 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
855 855  
856 -=== (% data-sider-select-id="730a4b6f-6adf-4db6-bccf-f911bfed1354" %)5.6.5 System ~-~-> Remote Mgnt & Auto Provision(%%) ===
857 857  
858 -
859 859  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
860 860  
861 861  
... ... @@ -878,9 +878,10 @@
878 878  [[image:image-20220916140017-16.png||height="619" width="911"]]
879 879  
880 880  
881 -=== (% data-sider-select-id="a2b72367-c22f-4274-9fe5-109ef8008b8e" %)5.6.6 System ~-~-> Firmware Upgrade(%%) ===
882 882  
911 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
883 883  
913 +
884 884  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
885 885  
886 886  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -923,169 +923,62 @@
923 923  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
924 924  
925 925  
926 -=== (% data-sider-select-id="07bc9f06-7099-42c0-964c-149f601f3627" %)5.6.7 System ~-~-> Reboot/Reset(%%) ===
927 927  
957 +=== 5.5.9 System ~-~-> Reboot/Reset ===
928 928  
959 +
929 929  [[image:image-20220916140312-18.png||height="286" width="909"]]
930 930  
931 931  (((
932 932  
964 +
965 +
933 933  )))
934 934  
935 -=== (% data-sider-select-id="2ceda713-1253-4788-9e11-0dd9d81977b3" %)5.6.8 System ~-~-> Package Maintain(%%) ===
968 +=== 5.5.10 System ~-~-> Package Maintain ===
936 936  
937 937  
938 938  [[image:image-20220916140421-19.png||height="715" width="904"]]
939 939  
973 +
940 940  Place to show what package has installed and possible to upgrade packages.
941 941  
942 942  
943 -== (% data-sider-select-id="79337028-35c7-4229-a401-04b91f009ce3" %)5.7 LogRead(%%) ==
944 944  
945 -=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
978 +== 5.6 LogRead ==
946 946  
947 -(% style="display:none" %) (%%)
948 948  
949 -(% data-sider-select-id="b7ed19c4-acf7-4583-9e50-5cd99c4cdeae" %)
950 -Show the frequency for LoRa Radio:
981 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
951 951  
952 -[[image:image-20220916140549-20.png||height="729" width="877"]]
983 +(% style="display:none" %) (%%)
953 953  
985 +Show the frequency for LoRa Radio and traffics.
954 954  
955 955  
956 -=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
988 +[[image:image-20220916140549-20.png||height="729" width="877"]]
957 957  
958 958  
959 -(% data-sider-select-id="e9787126-554a-4bb4-8f31-ab2ce0e55165" %)
960 -Show the gateway traffic:
961 961  
962 -[[image:image-20240416112159-1.png||height="610" width="872"]]
992 +=== 5.6.2 LogRead ~-~-> System Log ===
963 963  
964 -=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.3 LogRead ~-~-> System Log(%%) ===
965 965  
966 -
967 967  Show the system log
968 968  
997 +
969 969  [[image:image-20220916140732-21.png||height="710" width="872"]]
970 970  
971 971  
972 -=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.4 LogRead ~-~-> (%%)Record Log(% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %) (%%) ===
973 973  
974 -
975 -This interface can record gateway logs:
976 -
977 -[[image:image-20240416112510-2.png||height="296" width="870"]]
978 -
979 979  = 6. More features =
980 980  
981 -== 6.1 Packet Filtering ==
982 982  
1005 +== 6.1 More instructions ==
983 983  
984 -Drop unwanted packets.
985 985  
986 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
987 -
988 -
989 -== 6.2 Remote Access ==
990 -
991 -
992 -Remote Access Devices for management.
993 -
994 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
995 -
996 -
997 -== 6.3 How to decode ABP LoRaWAN node ==
998 -
999 -
1000 -Decode ABP:
1001 -
1002 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
1003 -
1004 -
1005 -== 6.4 How to set data to MQTT broker ==
1006 -
1007 -
1008 -Only support ABP LoRaWAN End Node
1009 -
1010 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1011 -
1012 -
1013 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1014 -
1015 -
1016 -If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
1017 -
1018 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
1019 -
1020 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
1021 -
1022 -
1023 -If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
1024 -
1025 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
1026 -
1027 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
1028 -
1029 -
1030 -(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
1031 -
1032 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1033 -
1034 -
1035 -== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1036 -
1037 -
1038 -USB card reader plugged into the USB port of the gateway.
1039 -
1040 -Access the gateway Linux Command Line.
1041 -
1042 -
1043 -Check the USB device
1044 -
1045 -[[image:image-20230425165308-2.png]]
1046 -
1047 -
1048 -**Mount the USB device**
1049 -
1050 -(% class="box infomessage" %)
1051 -(((
1052 -mount /dev/sda1 /mnt/
1053 -)))
1054 -
1055 -[[image:image-20230425174131-4.png]]
1056 -
1057 -
1058 -
1059 -**Set up the automatic mount on boot**
1060 -
1061 -
1062 -(% class="box infomessage" %)
1063 -(((
1064 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1065 -)))
1066 -
1067 -[[image:image-20230425173831-3.png||height="105" width="833"]]
1068 -
1069 -
1070 -== 6.7  How to view DLOS8N GPS information ==
1071 -
1072 -
1073 -By default, when the DLOS8N GPS positioning is complete, it will be displayed in the state package on the **LogRead ~-~-> System Log**  interface.
1074 -
1075 -[[image:image-20230508134051-1.png||height="696" width="922"]]
1076 -
1077 -
1078 -When the gateway is registered with the TTN server, the GPS information is also displayed in the TTN log.
1079 -
1080 -[[image:image-20230508134603-2.png||height="435" width="927"]]
1081 -
1082 -
1083 -== 6.8  More instructions ==
1084 -
1085 -
1086 1086  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1087 1087  
1088 1088  
1011 +
1089 1089  = 7. Linux System =
1090 1090  
1091 1091  
... ... @@ -1092,18 +1092,19 @@
1092 1092  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1093 1093  
1094 1094  
1018 +
1095 1095  == 7.1 SSH Access for Linux console ==
1096 1096  
1097 1097  
1098 1098  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1099 1099  
1100 -**IP address:  ** IP address of DLOS8N
1024 +IP address:  IP address of DLOS8N
1101 1101  
1102 -**Port:  ** 22 (via WiFi AP mode) or 2222 (via WAN Interface)
1026 +Port:  22 (via WiFi AP mode) or 2222 (via WAN Interface)
1103 1103  
1104 -**User Name: ** (% style="color:green" %)**root**
1028 +User Name:      (% style="color:green" %)**root**
1105 1105  
1106 -**Password:**         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1030 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1107 1107  
1108 1108  After logging in, you will be in the Linux console and can enter commands as shown below.
1109 1109  
... ... @@ -1115,6 +1115,7 @@
1115 1115  [[image:1657090508015-884.png]]
1116 1116  
1117 1117  
1042 +
1118 1118  == 7.2 Edit and Transfer files ==
1119 1119  
1120 1120  
... ... @@ -1139,6 +1139,7 @@
1139 1139  [[image:1652431650755-450.png]]
1140 1140  
1141 1141  
1067 +
1142 1142  == 7.3 File System ==
1143 1143  
1144 1144  
... ... @@ -1155,6 +1155,7 @@
1155 1155  )))
1156 1156  
1157 1157  
1084 +
1158 1158  == 7.4 Package maintenance system ==
1159 1159  
1160 1160  
... ... @@ -1175,7 +1175,7 @@
1175 1175  )))
1176 1176  
1177 1177  (((
1178 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/ shows the available packages
1105 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1179 1179  )))
1180 1180  
1181 1181  (((
... ... @@ -1212,10 +1212,11 @@
1212 1212  (((
1213 1213  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1214 1214  
1142 +
1215 1215  
1216 1216  )))
1217 1217  
1218 -= 8. Upgrade Linux Firmware =
1146 += 8.  Upgrade Linux Firmware =
1219 1219  
1220 1220  
1221 1221  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -1234,9 +1234,10 @@
1234 1234  )))
1235 1235  
1236 1236  
1237 -== 8.1 Upgrade via Web UI ==
1238 1238  
1166 +== 8.1 Upgrade via Web UI ==
1239 1239  
1168 +
1240 1240  (((
1241 1241  Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
1242 1242  )))
... ... @@ -1260,9 +1260,10 @@
1260 1260  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657158986600-386.png?rev=1.1||alt="1657158986600-386.png"]]
1261 1261  
1262 1262  
1263 -== 8.2 Upgrade via Linux console ==
1264 1264  
1193 +== 8.2 Upgrade via Linux console ==
1265 1265  
1195 +
1266 1266  (((
1267 1267  SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
1268 1268  )))
... ... @@ -1277,17 +1277,13 @@
1277 1277  )))
1278 1278  
1279 1279  
1280 -= 9. OTA System Update =
1281 1281  
1211 += 9. FAQ =
1282 1282  
1283 -DLOS8N supports system auto update via OTA, please see **[[this URL>>doc:OTA Update.WebHome]]** for the detail of this feature.
1284 1284  
1214 +== 9.1 How can I configure for a customized frequency band? ==
1285 1285  
1286 -= 10. FAQ =
1287 1287  
1288 -== 10.1 How can I configure for a customized frequency band? ==
1289 -
1290 -
1291 1291  (((
1292 1292  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1293 1293  )))
... ... @@ -1294,9 +1294,11 @@
1294 1294  
1295 1295  (((
1296 1296  
1223 +
1224 +
1297 1297  )))
1298 1298  
1299 -== 10.2 Can I connect DLOS8N to LORIOT? ==
1227 +== 9.2 Can I connect DLOS8N to LORIOT? ==
1300 1300  
1301 1301  
1302 1302  (((
... ... @@ -1304,9 +1304,10 @@
1304 1304  )))
1305 1305  
1306 1306  
1307 -== 10.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1308 1308  
1236 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1309 1309  
1238 +
1310 1310  (((
1311 1311  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1312 1312  )))
... ... @@ -1316,17 +1316,20 @@
1316 1316  )))
1317 1317  
1318 1318  
1319 -== 10.4 Can I use 868Mhz version for 915Mhz bands? ==
1320 1320  
1249 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1321 1321  
1251 +
1322 1322  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1323 1323  
1324 1324  
1325 -= 11. Trouble Shooting =
1326 1326  
1327 -== 11.1 I get kernel error when install new package, how to fix? ==
1256 += 10. Trouble Shooting =
1328 1328  
1329 1329  
1259 +== 10.1 I get kernel error when install new package, how to fix? ==
1260 +
1261 +
1330 1330  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1331 1331  
1332 1332  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1348,9 +1348,10 @@
1348 1348  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1349 1349  
1350 1350  
1351 -== 11.2 How to recover the DLOS8N if the firmware crashes ==
1352 1352  
1284 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
1353 1353  
1286 +
1354 1354  (((
1355 1355  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1356 1356  )))
... ... @@ -1357,9 +1357,11 @@
1357 1357  
1358 1358  (((
1359 1359  
1293 +
1294 +
1360 1360  )))
1361 1361  
1362 -== 11.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1297 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1363 1363  
1364 1364  
1365 1365  [[image:1657090540821-317.png]]
... ... @@ -1392,6 +1392,8 @@
1392 1392  
1393 1393  
1394 1394  As below photo:
1330 +
1331 +
1395 1395  )))
1396 1396  
1397 1397  [[image:1652435256286-879.png]]
... ... @@ -1403,40 +1403,31 @@
1403 1403  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1404 1404  
1405 1405  
1406 -(% data-sider-select-id="f9e9779e-261d-4a53-9ba6-a4d1c45cec19" %)
1407 -== 11.4  Why does the gateway reboot every 15 minutes without Internet? ==
1408 1408  
1409 -(% data-sider-select-id="77a3f493-29a0-4e57-a8ac-cd19e74d463d" %)
1410 -Check whether Internet Detect is enabled on the (% data-sider-select-id="98a5126a-698d-4dc1-af3b-b62ed09b2db0" %)**System~-~->General**(%%) interface.
1344 += 11. Order Info =
1411 1411  
1412 -Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1413 1413  
1414 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1347 + **//PART: (% style="color:blue" %)DLOS8N-XXX-YYY//(%%)**
1415 1415  
1349 +(% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1416 1416  
1417 -= 12. Order Info =
1418 -
1419 -
1420 - **PART: (% style="color:blue" %)DLOS8N-XXX-YYY(%%)**
1421 -
1422 -(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1423 -
1424 1424  * (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1425 1425  * (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1426 1426  
1427 -(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1354 +(% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1428 1428  
1429 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1430 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1431 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1432 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1356 +* (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1357 +* (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1358 +* (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1359 +* (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1433 1433  
1434 1434  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1435 1435  
1436 1436  
1437 -= 13. Packing Info =
1438 1438  
1365 += 12. Packing Info =
1439 1439  
1367 +
1440 1440  (((
1441 1441  **Package Includes**:
1442 1442  )))
... ... @@ -1457,7 +1457,7 @@
1457 1457  (% style="display:none" %) (%%)
1458 1458  
1459 1459  
1460 -= 14. Support =
1388 += 13. Support =
1461 1461  
1462 1462  
1463 1463  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
... ... @@ -1466,4 +1466,3 @@
1466 1466  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1467 1467  
1468 1468  
1469 -)))
image-20230415172432-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -85.4 KB
Content
image-20230425165215-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.9 KB
Content
image-20230425165308-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -32.5 KB
Content
image-20230425173831-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
image-20230425174131-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -8.4 KB
Content
image-20230508134051-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -66.2 KB
Content
image-20230508134603-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -192.0 KB
Content
image-20240416112159-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -161.4 KB
Content
image-20240416112510-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -36.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0