Last modified by Kilight Cao on 2025/03/17 17:02
<
From version < 191.3 >
edited by Xiaoling
on 2023/06/10 16:36
To version < 210.1 >
edited by Kilight Cao
on 2025/03/08 14:34
>
Change comment: Uploaded new attachment "image-20250308143446-3.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Kilight
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -94,7 +94,7 @@
94 94  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
95 95  * 70 dB CW interferer rejection at 1 MHz offset
96 96  * Able to operate with negative SNR, CCR up to 9dB
97 -* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
97 +* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
98 98  * Dual digital TX & RX radio front-end interfaces
99 99  * 10 programmable parallel demodulation paths
100 100  * Dynamic data-rate (DDR) adaptation
... ... @@ -119,8 +119,6 @@
119 119  * Isolation level 4 KVrms.
120 120  * Enhanced surge protection
121 121  
122 -
123 -
124 124  == 1.3 Features ==
125 125  
126 126  
... ... @@ -143,8 +143,6 @@
143 143  * Power Consumption:12v ,300-500mA
144 144  * Operating Temperature： -20~~85°C
145 145  
146 -
147 -
148 148  == 1.4 Hardware System Structure ==
149 149  
150 150  
... ... @@ -204,7 +204,6 @@
204 204  
205 205  DLOS8N use directional WiFi Antenna. The best direction is as below:
206 206  
207 -
208 208  [[image:1652412859663-161.png||height="341" width="333"]]
209 209  
210 210  
... ... @@ -224,7 +224,6 @@
224 224  
225 225  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
226 226  
227 -
228 228  [[image:1652413127647-377.png]]
229 229  
230 230  
... ... @@ -263,7 +263,7 @@
263 263  
264 264  
265 265  (((
266 -The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
260 +The WAN port also has a [[fall back ip address>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
267 267  )))
268 268  
269 269  
... ... @@ -305,15 +305,11 @@
305 305  * **WiFi AP Mode**
306 306  * **Cellular Mode**
307 307  
308 -
309 -
310 310  == 3.2 Use WAN port to access Internet ==
311 311  
312 312  
313 313  (((
314 314  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
315 -
316 -
317 317  )))
318 318  
319 319  [[image:image-20220916112129-1.png||height="414" width="887"]]
... ... @@ -329,14 +329,11 @@
329 329  (((
330 330  (((
331 331  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
332 -
333 -
334 334  )))
335 335  )))
336 336  
337 337  [[image:image-20220916142159-25.png||height="406" width="877"]](% style="display:none" %)
338 338  
339 -
340 340  (((
341 341  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
342 342  
... ... @@ -375,8 +375,6 @@
375 375  
376 376  (((
377 377  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
378 -
379 -
380 380  )))
381 381  
382 382  (((
... ... @@ -388,6 +388,8 @@
388 388  (% style="color:red" %)**Note** ***: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.**
389 389  
390 390  
376 +When cellular fails to connect or has problems, users can refer to this link to Trouble Shooting:**[[How to Trouble Shooting if Cellular connection fails>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.1ForLPS8N2FDLOS8N2FLG308N]]**
377 +
391 391  == 3.5 Check Internet connection ==
392 392  
393 393  
... ... @@ -405,8 +405,6 @@
405 405  
406 406  (((
407 407  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
408 -
409 -
410 410  )))
411 411  
412 412  (((
... ... @@ -423,8 +423,6 @@
423 423  
424 424  (((
425 425  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
426 -
427 -
428 428  )))
429 429  
430 430  (((
... ... @@ -440,17 +440,14 @@
440 440  The example gateway id is: (% style="color:green" %)**a840411e96744154**
441 441  
442 442  
443 -
444 444  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
445 445  
446 446  
447 447  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
448 448  
449 -
450 450  [[image:1652422127479-258.png||height="346" width="738"]]
451 451  
452 452  
453 -
454 454  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
455 455  
456 456  
... ... @@ -468,7 +468,6 @@
468 468  * Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
469 469  * Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
470 470  
471 -
472 472  (% style="color:blue" %)**Step 4: Create a Gateway**
473 473  
474 474  
... ... @@ -493,7 +493,6 @@
493 493  
494 494  After creating the gateway, you can see the gateway info, as below.
495 495  
496 -
497 497  [[image:1657089571089-281.png]]
498 498  
499 499  
... ... @@ -510,8 +510,6 @@
510 510  
511 511  (((
512 512  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
513 -
514 -
515 515  )))
516 516  
517 517  [[image:1657089586062-302.png]]
... ... @@ -537,7 +537,6 @@
537 537  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
538 538  )))
539 539  
540 -
541 541  [[image:1652422737399-529.png||height="362" width="737"]]
542 542  
543 543  
... ... @@ -546,7 +546,7 @@
546 546   [[image:1652422763536-750.png||height="514" width="730"]]
547 547  
548 548  
549 -== 4.4 Add a LoRaWAN End Device ==
524 +== (% data-sider-select-id="5bc80c23-9f00-4475-8de0-dc684ffabb7d" %)4.4 Add a LoRaWAN End Device(%%) ==
550 550  
551 551  
552 552  (((
... ... @@ -660,11 +660,10 @@
660 660  
661 661  Shows the system running status.
662 662  
663 -
664 664  [[image:image-20220916113702-4.png||height="331" width="727"]]
665 665  
666 666  
667 -== 5.2 LoRa Settings ==
641 +== (% data-sider-select-id="f01d6e3f-c35d-47d2-9a33-65fdc9b3a72e" %)5.2 LoRa Settings(%%) ==
668 668  
669 669  === 5.2.1 LoRa ~-~-> LoRa ===
670 670  
... ... @@ -684,13 +684,10 @@
684 684  
685 685  
686 686  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
687 -
688 -
689 689  )))
690 690  
691 691  [[image:image-20220916114014-5.png||height="429" width="930"]]
692 692  
693 -
694 694  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
695 695  
696 696  
... ... @@ -706,24 +706,21 @@
706 706  
707 707  (((
708 708  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
709 -
710 -
711 711  )))
712 712  
713 713  [[image:image-20220916114346-7.png||height="363" width="886"]]
714 714  
715 715  
716 -== 5.3 LoRaWAN Settings ==
685 +== (% data-sider-select-id="e4f0e724-e454-4aa9-adc3-2d2fb381a93c" %)5.3 LoRaWAN Settings(%%) ==
717 717  
718 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
687 +=== (% data-sider-select-id="46832cd3-1415-4286-a897-1fbda6ed3a2a" %)5.3.1 LoRaWAN ~-~-> Semtech UDP(%%) ===
719 719  
720 720  
721 721  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
722 722  
692 +[[image:image-20240517101310-1.png||height="656" width="879"]]
723 723  
724 -[[image:image-20220916114929-8.png||height="716" width="871"]]
725 725  
726 -
727 727  (% style="color:red" %)**Note:**
728 728  
729 729  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
... ... @@ -759,14 +759,12 @@
759 759  
760 760  (((
761 761  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
762 -
763 -
764 764  )))
765 765  
766 766  [[image:image-20220916115143-9.png||height="314" width="858"]]
767 767  
768 768  
769 -== 5.4 MQTT Settings ==
735 +== (% data-sider-select-id="30ceca0a-d0e8-4382-ac5a-59bebcb19c51" %)5.4 MQTT Settings(%%) ==
770 770  
771 771  
772 772  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -773,99 +773,126 @@
773 773  
774 774  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
775 775  
776 -
777 777  [[image:1657090037148-906.png]]
778 778  
779 779  
780 -== 5.5 System ==
745 +== 5.5  Network ==
781 781  
782 -=== 5.5.1 System ~-~-> System Overview ===
747 +=== 5.5.1  Network ~-~-> Network Status ===
783 783  
784 784  
785 -Shows the system info:
750 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
786 786  
787 787  
788 -[[image:image-20220916133758-10.png||height="611" width="865"]]
753 +(% data-sider-select-id="5ec9b41d-26fb-4b6f-8f48-4c2f2c564c53" %)
754 +=== 5.5.2  Network ~-~-> Network ===
789 789  
790 790  
791 -=== 5.5.2 System ~-~-> General ( login settings) ===
792 -
793 -
794 -[[image:image-20220916134411-11.png||height="505" width="875"]]
795 -
796 -
797 797  (((
798 -(% style="color:#037691" %)**__System Password:__**
758 +(% data-sider-select-id="80d07254-c65e-47a2-86b6-8e6220924c25" %)
759 +(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
799 799  )))
800 800  
801 801  (((
802 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
763 +(% data-sider-select-id="d9954e50-7f68-4249-b699-61f53219fb57" %)
764 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for DLOS8N WAN port
803 803  )))
804 804  
805 805  (((
806 -This page can be used to set the password for them.
768 +(% data-sider-select-id="c87bbc6b-c98a-416d-a0a1-03f1ed827688" %)
769 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
807 807  )))
808 808  
809 -(((
810 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
811 -)))
772 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
812 812  
813 -(((
814 -(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
815 815  
816 -
817 -)))
775 +=== 5.5.3  Network ~-~-> WiFi ===
818 818  
819 -=== 5.5.3 System ~-~-> Network ===
820 820  
778 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
779 +DLOS8N WiFi Settings.
821 821  
822 -[[image:image-20220916134642-12.png||height="417" width="886"]]
781 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
782 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
823 823  
824 824  
785 +=== 5.5.4  Network ~-~-> Cellular ===
786 +
787 +
788 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
789 +
790 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
791 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
792 +
793 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
794 +(% data-sider-select-id="1470493c-3c33-42a0-89eb-132d9554b028" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
795 +
796 +When cellular fails to connect or has problems, users can refer to this link to Trouble Shooting:**[[How to Trouble Shooting if Cellular connection fails>>url:https://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20cellular%20network%20connection/#H2.1ForLPS8N2FDLOS8N2FLG308N]]**
797 +
798 +== (% data-sider-select-id="b34f40d0-e802-4e45-8a8c-6620e692699e" %)5.6 System(%%) ==
799 +
800 +=== (% data-sider-select-id="0d466e95-c71d-43c8-9e78-cc547eea894f" %)5.6.1 System ~-~-> System Overview(%%) ===
801 +
802 +
803 +Shows the system info:
804 +
805 +[[image:image-20220916133758-10.png||height="611" width="865"]]
806 +
807 +
808 +=== (% data-sider-select-id="dfb74220-f4d5-45ee-89d6-758b065fd447" %)5.6.2 System ~-~-> General ( login settings)(%%) ===
809 +
810 +
811 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png"]]
812 +
825 825  (((
826 -(% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
814 +
815 +
816 +(% data-sider-select-id="be43359c-6dc0-4f21-a3e8-95fb8b9622d4" %)
817 +There are two login for DLOS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
827 827  )))
828 828  
829 829  (((
830 -(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
821 +This page can be used to set the password for them.
831 831  )))
832 832  
833 833  (((
834 -(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
835 -
836 -
825 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
837 837  )))
838 838  
839 -=== 5.5.4 System ~-~-> WiFi ===
828 +(((
829 +(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
830 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
840 840  
832 +(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
833 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
841 841  
842 -DLOS8N WiFi Settings.
835 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
843 843  
837 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
844 844  
845 -[[image:image-20220916134831-13.png||height="426" width="909"]](% style="display:none" %)
839 +(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
840 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
846 846  
847 847  
848 -=== 5.5.5 System ~-~-> Cellular ===
843 +=== 5.6.3 System ~-~-> Backup/Restore Config ===
849 849  
850 850  
851 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
846 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
852 852  
853 853  
854 -[[image:image-20220916135100-14.png||height="364" width="917"]]
849 +=== 5.6.4 System ~-~-> Remote.it ===
855 855  
856 856  
857 -(% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
852 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
858 858  
854 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
859 859  
860 -=== 5.5.6 System ~-~-> Network Status ===
856 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
861 861  
862 862  
863 -[[image:image-20220916135207-15.png||height="630" width="926"]]
859 +=== (% data-sider-select-id="730a4b6f-6adf-4db6-bccf-f911bfed1354" %)5.6.5 System ~-~-> Remote Mgnt & Auto Provision(%%) ===
864 864  
865 865  
866 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
867 -
868 -
869 869  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
870 870  
871 871  
... ... @@ -883,12 +883,12 @@
883 883  )))
884 884  
885 885  
886 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]**
879 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>https://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/#H3.A0RSSHIntroduction]]**
887 887  
888 888  [[image:image-20220916140017-16.png||height="619" width="911"]]
889 889  
890 890  
891 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
884 +=== (% data-sider-select-id="a2b72367-c22f-4274-9fe5-109ef8008b8e" %)5.6.6 System ~-~-> Firmware Upgrade(%%) ===
892 892  
893 893  
894 894  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -933,7 +933,7 @@
933 933  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
934 934  
935 935  
936 -=== 5.5.9 System ~-~-> Reboot/Reset ===
929 +=== (% data-sider-select-id="07bc9f06-7099-42c0-964c-149f601f3627" %)5.6.7 System ~-~-> Reboot/Reset(%%) ===
937 937  
938 938  
939 939  [[image:image-20220916140312-18.png||height="286" width="909"]]
... ... @@ -942,47 +942,86 @@
942 942  
943 943  )))
944 944  
945 -=== 5.5.10 System ~-~-> Package Maintain ===
938 +=== (% data-sider-select-id="2ceda713-1253-4788-9e11-0dd9d81977b3" %)5.6.8 System ~-~-> Package Maintain(%%) ===
946 946  
947 947  
948 948  [[image:image-20220916140421-19.png||height="715" width="904"]]
949 949  
950 -
951 951  Place to show what package has installed and possible to upgrade packages.
952 952  
953 953  
954 -== 5.6 LogRead ==
946 +== (% data-sider-select-id="79337028-35c7-4229-a401-04b91f009ce3" %)5.7 LogRead(%%) ==
955 955  
956 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
948 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
957 957  
958 958  (% style="display:none" %) (%%)
959 959  
960 -Show the frequency for LoRa Radio and traffics.
952 +(% data-sider-select-id="b7ed19c4-acf7-4583-9e50-5cd99c4cdeae" %)
953 +Show the frequency for LoRa Radio:
961 961  
962 -
963 963  [[image:image-20220916140549-20.png||height="729" width="877"]]
964 964  
965 965  
966 -=== 5.6.2 LogRead ~-~-> System Log ===
967 967  
959 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
968 968  
969 -Show the system log
970 970  
962 +(% data-sider-select-id="e9787126-554a-4bb4-8f31-ab2ce0e55165" %)
963 +Show the gateway traffic:
971 971  
965 +[[image:image-20240416112159-1.png||height="610" width="872"]]
966 +
967 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.3 LogRead ~-~-> System Log(%%) ===
968 +
969 +
970 +Show the system log
971 +
972 972  [[image:image-20220916140732-21.png||height="710" width="872"]]
973 973  
974 974  
975 -= 6. More features =
975 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.4 LogRead ~-~-> (%%)Record Log(% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %) (%%) ===
976 976  
977 -== 6.1 Packet Filtering ==
978 978  
978 +This interface can record gateway logs:
979 979  
980 +[[image:image-20240416112510-2.png||height="296" width="870"]]
981 +
982 += (% data-sider-select-id="53575777-5441-4a56-84e2-d3a229a8ece3" %)6. More features(%%) =
983 +
984 +
985 +== (% data-sider-select-id="2ef025e3-4214-4b1c-bb01-ee03e1db2bc2" %)6.1 NTP Service/Time Synchronization(%%) ==
986 +
987 +The gateway time sync service is provided by ntpd
988 +
989 +=== 1). Modify the NTP server address: ===
990 +
991 +(% class="box" %)
992 +(((
993 +~#~##Linux command
994 +
995 +uci set system.ntp.server='0.openwrt.pool.ntp.org'  #Required
996 +
997 +uci add_list system.ntp.server='1.openwrt.pool.ntp.org' #Optional
998 +
999 +uci add_list system.ntp.server='2.openwrt.pool.ntp.org' #Optional
1000 +
1001 +uci add_list system.ntp.server='3.openwrt.pool.ntp.org'  #Optional
1002 +
1003 +uci commit system #Required
1004 +)))
1005 +
1006 +**Note: If the NTP server is a Windows host, it may cause the time synchronization to fail, **
1007 +
1008 +
1009 +== (% data-sider-select-id="68c5d9c8-0690-4e39-abae-0a921c179211" %)6.2 Packet Filtering(%%) ==
1010 +
1011 +
980 980  Drop unwanted packets.
981 981  
982 982  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
983 983  
984 984  
985 -== 6.2 Remote Access ==
1017 +== (% data-sider-select-id="6b98cd6d-f2db-4647-ae38-aee4a3d7227b" %)6.3 Remote Access(%%) ==
986 986  
987 987  
988 988  Remote Access Devices for management.
... ... @@ -990,7 +990,7 @@
990 990  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
991 991  
992 992  
993 -== 6.3 How to decode ABP LoRaWAN node ==
1025 +== (% data-sider-select-id="8084465c-aa6f-4536-b97d-383cd952e46c" %)6.4 How to decode ABP LoRaWAN node(%%) ==
994 994  
995 995  
996 996  Decode ABP:
... ... @@ -998,7 +998,7 @@
998 998  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
999 999  
1000 1000  
1001 -== 6.4 How to set data to MQTT broker ==
1033 +== (% data-sider-select-id="a4a3d7bb-c435-47b3-a926-46788a4f9e6f" %)6.5 How to set data to MQTT broker(%%) ==
1002 1002  
1003 1003  
1004 1004  Only support ABP LoRaWAN End Node
... ... @@ -1006,7 +1006,7 @@
1006 1006  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1007 1007  
1008 1008  
1009 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1041 +== (% data-sider-select-id="0074e70a-5030-4401-916c-b12bd0557d05" %)6.6 How the gateway connects to Chirpstack v3/v4 via gateway-bridge(%%) ==
1010 1010  
1011 1011  
1012 1012  If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
... ... @@ -1027,10 +1027,142 @@
1027 1027  
1028 1028  After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1029 1029  
1062 +(% data-sider-select-id="eb4b3bf2-9e33-4650-b4d6-1bc049896baa" %)
1063 +== (% data-sider-select-id="e5ea7147-f618-4c9a-b8f9-e108ee76b9da" %)6.7  (% data-sider-select-id="1ae6690c-7910-44d5-999b-cd3b05be575f" %)How does the gateway connect to (% data-sider-select-id="e5ea7147-f618-4c9a-b8f9-e108ee76b9da" %)Chirpstack(% data-sider-select-id="1ae6690c-7910-44d5-999b-cd3b05be575f" %) via MQTT Forwarder(%%) ==
1030 1030  
1031 -== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1032 1032  
1066 +(% data-sider-select-id="33f2a7a8-cb1a-4c53-bd5b-716d3cc3d74f" %)
1067 +ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
1033 1033  
1069 +
1070 +(% data-sider-select-id="73a14e4a-5128-4f13-8207-7837c412ff54" %)
1071 +=== 6.7.1 Configure Packet Forwarder ===
1072 +
1073 +
1074 +In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
1075 +
1076 +(% data-sider-select-id="2972d256-3078-403f-9e33-3740a5869405" %)
1077 +By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="a9e64ab2-7a80-4174-b834-dba4904e3c85" %)**https:~/~/GATEWAY-IP-ADDRESS:8000**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are (% data-sider-select-id="16f9bbed-ffd7-4881-9cd1-33332f063857" %)**root / dragino**(%%).
1078 +
1079 +* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
1080 +* Configure the following settings:
1081 +** **Service Provider:** //Custom / Private LoRaWAN//
1082 +** **Server Address:** //localhost//
1083 +** **Uplink Port:** //1700//
1084 +** **Downlink Port:** //1700//
1085 +* Click **Save&Apply**
1086 +
1087 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518114149-2.png?width=876&height=683&rev=1.1||alt="image-20240518114149-2.png"]]
1088 +
1089 +(% data-sider-select-id="7ada6cd9-b472-473e-b709-31db23947a9c" %)
1090 +=== 6.7.2 Install ChirpStack MQTT Forwarder ===
1091 +
1092 +
1093 +(% data-sider-select-id="cd761ad9-41f8-4cc3-8dc8-cf25ebe79e69" %)
1094 +(% data-sider-select-id="74577a45-a26e-4ab8-b56c-2ba79220e6c6" %)**SSH login**
1095 +
1096 +(% data-sider-select-id="f4b22a8a-3b87-4cc7-b4ed-451fdd8aa9a7" %)
1097 +First user must login into the gateway using SSH,user can refer to the link to access the Linux console via SSH to the gateway: **[[SSH Access for Linux console>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/#H7.LinuxSystem||data-sider-select-id="27b6862a-68e4-4f69-a5b2-b33d8a06a09c"]]**
1098 +
1099 +
1100 +(% data-sider-select-id="e9c9429f-f7c4-4eb3-b3f4-99553fe741b0" %)
1101 +(% data-sider-select-id="83ee7071-3524-45ba-99b2-9f3472815cd8" %)**Download IPK**
1102 +
1103 +Use the following commands to download the latest version of the chirpstack-mqtt-forwarder package:
1104 +
1105 +(% class="box infomessage" data-sider-select-id="b970d0e5-64ca-47c8-8c9c-6261200a719f" %)
1106 +(((
1107 +cd /tmp
1108 +wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/vendor/dragino/mips_24kc/chirpstack-mqtt-forwarder_4.3.0-r1_mips_24kc.ipk
1109 +)))
1110 +
1111 +
1112 +(% data-sider-select-id="27190188-ef2a-4d53-8b94-c4653b69b266" %)
1113 +(% data-sider-select-id="3fe3ef50-33b9-4c6b-b228-7364e01382f3" %)**Install IPK**
1114 +
1115 +Use the opkg package-manager to install the downloaded package. Example:
1116 +
1117 +(% class="box infomessage" data-sider-select-id="86f1197c-5aaf-4a1b-a21f-09266a2805e7" %)
1118 +(((
1119 +opkg install chirpstack-mqtt-forwarder_4.3.0-r1_mips_24kc.ipk
1120 +)))
1121 +
1122 +
1123 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518134824-5.png?rev=1.1||alt="image-20240518134824-5.png"]]
1124 +
1125 +(% data-sider-select-id="e8065348-1a8e-45a9-bb73-171b9322d2b2" %)
1126 +(% data-sider-select-id="e9401e38-e30d-4c39-94fa-927c9a40e151" %)**Configuration**
1127 +
1128 +(% data-sider-select-id="2a70737e-070b-4a83-a474-2fef1076a006" %)
1129 +To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1130 +
1131 +(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1132 +This file is located at: (% data-sider-select-id="b010c8b8-6367-49bf-9c2e-3ee0b8a6ef0e" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1133 +
1134 +
1135 +(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1136 +(% data-sider-select-id="fab61fd5-2c9f-4b72-9b65-457dca26cbd0" %)**ChirpStack MQTT Forwarder Setting:**
1137 +
1138 +(% class="box" data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1139 +(((
1140 +topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1141 +
1142 +server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1143 +)))
1144 +
1145 +(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1146 +username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1147 +
1148 +
1149 +Use commands to modify configuration files:
1150 +
1151 +(% class="box infomessage" data-sider-select-id="b84cf72d-69e4-441c-a8fb-bd21a500d223" %)
1152 +(((
1153 +vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1154 +)))
1155 +
1156 +
1157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1158 +
1159 +(% data-sider-select-id="3312b6d5-334c-43ae-8cd9-2f73989940e2" %)
1160 +(% data-sider-select-id="2b334f7c-35d3-4771-8b17-5760685430ac" %)**(Re)start and stop commands**
1161 +
1162 +(% data-sider-select-id="b8175b05-70b1-4251-97a1-8c0b2644e4d4" %)
1163 +Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1164 +
1165 +(% class="box infomessage" data-sider-select-id="fc0e9684-3620-4f52-8045-9f6b7dd083e3" %)
1166 +(((
1167 +# start
1168 +
1169 +(% data-sider-select-id="5a644c5c-1ca5-4680-877e-c6aecd21f9de" %)
1170 +/etc/init.d/chirpstack-mqtt-forwarder start
1171 +
1172 +# stop
1173 +
1174 +/etc/init.d/chirpstack-mqtt-forwarder stop
1175 +
1176 +# restart
1177 +
1178 +/etc/init.d/chirpstack-mqtt-forwarder restart
1179 +)))
1180 +
1181 +(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1182 +(% data-sider-select-id="fcef88f4-ef44-4459-9154-6cd154c5b298" %)**Check result**
1183 +
1184 +(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1185 +Use "(% data-sider-select-id="494c67e8-3e62-45ee-8464-e2bb33057003" %)** **(%%)​​​​​(% data-sider-select-id="494c67e8-3e62-45ee-8464-e2bb33057003" style="background-color:yellow" %)**logread -f **(%%)" to check the operation of ChirpStack MQTT Forwarder.[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518142300-7.png?rev=1.1||alt="image-20240518142300-7.png"]]
1186 +
1187 +
1188 +(% data-sider-select-id="a4ab5ddc-dbfe-4c41-ac6e-6159b517d02f" %)
1189 +Go back to the Chirpstack server to check whether the gateway is (% data-sider-select-id="0689bd86-c7a8-4831-b064-d1c4ed6241e5" %)**"online"**(%%) and whether the packets are displayed normally.
1190 +
1191 +
1192 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1193 +
1194 +
1195 +== (% data-sider-select-id="c6cadb28-a27e-4499-92bb-189a644b8fda" %)6.8  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive).(%%) ==
1196 +
1197 +
1034 1034  USB card reader plugged into the USB port of the gateway.
1035 1035  
1036 1036  Access the gateway Linux Command Line.
... ... @@ -1063,7 +1063,7 @@
1063 1063  [[image:image-20230425173831-3.png||height="105" width="833"]]
1064 1064  
1065 1065  
1066 -== 6.7 How to view DLOS8N GPS information ==
1230 +== (% data-sider-select-id="2f4b3d14-0080-4223-bc52-d74facde85a6" %)6.9  How to view DLOS8N GPS information(%%) ==
1067 1067  
1068 1068  
1069 1069  By default, when the DLOS8N GPS positioning is complete, it will be displayed in the state package on the **LogRead ~-~-> System Log**  interface.
... ... @@ -1076,7 +1076,7 @@
1076 1076  [[image:image-20230508134603-2.png||height="435" width="927"]]
1077 1077  
1078 1078  
1079 -== 6.8  More instructions ==
1243 +== (% data-sider-select-id="9c733551-ff43-41d9-9c06-2a6157a6b46f" %)6.10  More instructions(%%) ==
1080 1080  
1081 1081  
1082 1082  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
... ... @@ -1388,8 +1388,6 @@
1388 1388  
1389 1389  
1390 1390  As below photo:
1391 -
1392 -
1393 1393  )))
1394 1394  
1395 1395  [[image:1652435256286-879.png]]
... ... @@ -1401,6 +1401,17 @@
1401 1401  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1402 1402  
1403 1403  
1566 +(% data-sider-select-id="f9e9779e-261d-4a53-9ba6-a4d1c45cec19" %)
1567 +== 11.4  Why does the gateway reboot every 15 minutes without Internet? ==
1568 +
1569 +(% data-sider-select-id="77a3f493-29a0-4e57-a8ac-cd19e74d463d" %)
1570 +Check whether Internet Detect is enabled on the (% data-sider-select-id="98a5126a-698d-4dc1-af3b-b62ed09b2db0" %)**System~-~->General**(%%) interface.
1571 +
1572 +Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1573 +
1574 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1575 +
1576 +
1404 1404  = 12. Order Info =
1405 1405  
1406 1406  
... ... @@ -1415,7 +1415,7 @@
1415 1415  
1416 1416  * (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1417 1417  * (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1418 -* (% style="color:red" %)**EC25-AU**(% style="color:black" %):  Latin America, New Zeland, Taiwan
1591 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1419 1419  * (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1420 1420  
1421 1421  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
... ... @@ -1453,3 +1453,4 @@
1453 1453  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1454 1454  
1455 1455  
1629 +)))
image-20240416112159-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +161.4 KB
Content
image-20240416112510-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.3 KB
Content
image-20240517101310-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.1 KB
Content
image-20250308142649-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.5 KB
Content
image-20250308143411-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +55.5 KB
Content
image-20250308143446-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +69.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0