Last modified by Kilight Cao on 2025/03/20 16:02
<
From version < 179.1 >
edited by Kilight Cao
on 2023/04/15 17:26
To version < 201.1 >
edited by Kilight Cao
on 2024/05/17 10:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -24,15 +24,15 @@
24 24  
25 25  
26 26  (((
27 -The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
27 +The DLOS8N is an** (% style="color:blue" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:blue" %). (%%)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
28 28  )))
29 29  
30 30  (((
31 -DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
31 +DLOS8N supports (% style="color:blue" %)**Semtech packet forwarder** (%%)and (% style="color:blue" %)**LoRaWAN Station connection**, (%%)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator.**
32 32  )))
33 33  
34 34  (((
35 -DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
35 +DLOS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands** (%%)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,7 +40,7 @@
40 40  )))
41 41  
42 42  (((
43 -DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
43 +DLOS8N supports (% style="color:blue" %)**auto-provision** (%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
44 44  
45 45  
46 46  )))
... ... @@ -94,7 +94,7 @@
94 94  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
95 95  * 70 dB CW interferer rejection at 1 MHz offset
96 96  * Able to operate with negative SNR, CCR up to 9dB
97 -* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
97 +* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
98 98  * Dual digital TX & RX radio front-end interfaces
99 99  * 10 programmable parallel demodulation paths
100 100  * Dynamic data-rate (DDR) adaptation
... ... @@ -119,7 +119,6 @@
119 119  * Isolation level 4 KVrms.
120 120  * Enhanced surge protection
121 121  
122 -
123 123  == 1.3 Features ==
124 124  
125 125  
... ... @@ -142,7 +142,6 @@
142 142  * Power Consumption:12v ,300-500mA
143 143  * Operating Temperature： -20~~85°C
144 144  
145 -
146 146  == 1.4 Hardware System Structure ==
147 147  
148 148  
... ... @@ -202,7 +202,6 @@
202 202  
203 203  DLOS8N use directional WiFi Antenna. The best direction is as below:
204 204  
205 -
206 206  [[image:1652412859663-161.png||height="341" width="333"]]
207 207  
208 208  
... ... @@ -222,7 +222,6 @@
222 222  
223 223  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
224 224  
225 -
226 226  [[image:1652413127647-377.png]]
227 227  
228 228  
... ... @@ -261,7 +261,7 @@
261 261  
262 262  
263 263  (((
264 -The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
260 +The WAN port also has a [[fall back ip address>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
265 265  )))
266 266  
267 267  
... ... @@ -303,14 +303,11 @@
303 303  * **WiFi AP Mode**
304 304  * **Cellular Mode**
305 305  
306 -
307 307  == 3.2 Use WAN port to access Internet ==
308 308  
309 309  
310 310  (((
311 311  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
312 -
313 -
314 314  )))
315 315  
316 316  [[image:image-20220916112129-1.png||height="414" width="887"]]
... ... @@ -326,14 +326,11 @@
326 326  (((
327 327  (((
328 328  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
329 -
330 -
331 331  )))
332 332  )))
333 333  
334 334  [[image:image-20220916142159-25.png||height="406" width="877"]](% style="display:none" %)
335 335  
336 -
337 337  (((
338 338  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
339 339  
... ... @@ -372,8 +372,6 @@
372 372  
373 373  (((
374 374  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
375 -
376 -
377 377  )))
378 378  
379 379  (((
... ... @@ -402,8 +402,6 @@
402 402  
403 403  (((
404 404  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
405 -
406 -
407 407  )))
408 408  
409 409  (((
... ... @@ -420,8 +420,6 @@
420 420  
421 421  (((
422 422  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
423 -
424 -
425 425  )))
426 426  
427 427  (((
... ... @@ -437,17 +437,14 @@
437 437  The example gateway id is: (% style="color:green" %)**a840411e96744154**
438 438  
439 439  
440 -
441 441  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
442 442  
443 443  
444 444  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
445 445  
446 -
447 447  [[image:1652422127479-258.png||height="346" width="738"]]
448 448  
449 449  
450 -
451 451  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
452 452  
453 453  
... ... @@ -489,7 +489,6 @@
489 489  
490 490  After creating the gateway, you can see the gateway info, as below.
491 491  
492 -
493 493  [[image:1657089571089-281.png]]
494 494  
495 495  
... ... @@ -506,8 +506,6 @@
506 506  
507 507  (((
508 508  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
509 -
510 -
511 511  )))
512 512  
513 513  [[image:1657089586062-302.png]]
... ... @@ -533,7 +533,6 @@
533 533  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
534 534  )))
535 535  
536 -
537 537  [[image:1652422737399-529.png||height="362" width="737"]]
538 538  
539 539  
... ... @@ -542,7 +542,7 @@
542 542   [[image:1652422763536-750.png||height="514" width="730"]]
543 543  
544 544  
545 -== 4.4 Add a LoRaWAN End Device ==
522 +== (% data-sider-select-id="5bc80c23-9f00-4475-8de0-dc684ffabb7d" %)4.4 Add a LoRaWAN End Device(%%) ==
546 546  
547 547  
548 548  (((
... ... @@ -656,7 +656,6 @@
656 656  
657 657  Shows the system running status.
658 658  
659 -
660 660  [[image:image-20220916113702-4.png||height="331" width="727"]]
661 661  
662 662  
... ... @@ -680,13 +680,10 @@
680 680  
681 681  
682 682  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
683 -
684 -
685 685  )))
686 686  
687 687  [[image:image-20220916114014-5.png||height="429" width="930"]]
688 688  
689 -
690 690  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
691 691  
692 692  
... ... @@ -702,24 +702,21 @@
702 702  
703 703  (((
704 704  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
705 -
706 -
707 707  )))
708 708  
709 709  [[image:image-20220916114346-7.png||height="363" width="886"]]
710 710  
711 711  
712 -== 5.3 LoRaWAN Settings ==
683 +== (% data-sider-select-id="e4f0e724-e454-4aa9-adc3-2d2fb381a93c" %)5.3 LoRaWAN Settings(%%) ==
713 713  
714 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
685 +=== (% data-sider-select-id="46832cd3-1415-4286-a897-1fbda6ed3a2a" %)5.3.1 LoRaWAN ~-~-> Semtech UDP(%%) ===
715 715  
716 716  
717 717  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
718 718  
690 +[[image:image-20240517101310-1.png||height="656" width="879"]]
719 719  
720 -[[image:image-20220916114929-8.png||height="716" width="871"]]
721 721  
722 -
723 723  (% style="color:red" %)**Note:**
724 724  
725 725  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
... ... @@ -755,14 +755,12 @@
755 755  
756 756  (((
757 757  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
758 -
759 -
760 760  )))
761 761  
762 762  [[image:image-20220916115143-9.png||height="314" width="858"]]
763 763  
764 764  
765 -== 5.4 MQTT Settings ==
733 +== (% data-sider-select-id="30ceca0a-d0e8-4382-ac5a-59bebcb19c51" %)5.4 MQTT Settings(%%) ==
766 766  
767 767  
768 768  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -769,99 +769,125 @@
769 769  
770 770  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
771 771  
772 -
773 773  [[image:1657090037148-906.png]]
774 774  
775 775  
776 -== 5.5 System ==
743 +== 5.5  Network ==
777 777  
778 -=== 5.5.1 System ~-~-> System Overview ===
745 +=== 5.5.1  Network ~-~-> Network Status ===
779 779  
780 780  
781 -Shows the system info:
748 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
782 782  
783 783  
784 -[[image:image-20220916133758-10.png||height="611" width="865"]]
751 +(% data-sider-select-id="5ec9b41d-26fb-4b6f-8f48-4c2f2c564c53" %)
752 +=== 5.5.2  Network ~-~-> Network ===
785 785  
786 786  
787 -=== 5.5.2 System ~-~-> General ( login settings) ===
788 -
789 -
790 -[[image:image-20220916134411-11.png||height="505" width="875"]]
791 -
792 -
793 793  (((
794 -(% style="color:#037691" %)**__System Password:__**
756 +(% data-sider-select-id="80d07254-c65e-47a2-86b6-8e6220924c25" %)
757 +(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
795 795  )))
796 796  
797 797  (((
798 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
761 +(% data-sider-select-id="d9954e50-7f68-4249-b699-61f53219fb57" %)
762 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for DLOS8N WAN port
799 799  )))
800 800  
801 801  (((
802 -This page can be used to set the password for them.
766 +(% data-sider-select-id="c87bbc6b-c98a-416d-a0a1-03f1ed827688" %)
767 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
803 803  )))
804 804  
805 -(((
806 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
807 -)))
770 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
808 808  
809 -(((
810 -(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
811 811  
812 -
813 -)))
773 +=== 5.5.3  Network ~-~-> WiFi ===
814 814  
815 -=== 5.5.3 System ~-~-> Network ===
816 816  
776 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
777 +DLOS8N WiFi Settings.
817 817  
818 -[[image:image-20220916134642-12.png||height="417" width="886"]]
779 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
780 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
819 819  
820 820  
783 +=== 5.5.4  Network ~-~-> Cellular ===
784 +
785 +
786 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
787 +
788 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
789 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
790 +
791 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
792 +(% data-sider-select-id="1470493c-3c33-42a0-89eb-132d9554b028" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
793 +
794 +
795 +== (% data-sider-select-id="b34f40d0-e802-4e45-8a8c-6620e692699e" %)5.6 System(%%) ==
796 +
797 +=== (% data-sider-select-id="0d466e95-c71d-43c8-9e78-cc547eea894f" %)5.6.1 System ~-~-> System Overview(%%) ===
798 +
799 +
800 +Shows the system info:
801 +
802 +[[image:image-20220916133758-10.png||height="611" width="865"]]
803 +
804 +
805 +=== (% data-sider-select-id="dfb74220-f4d5-45ee-89d6-758b065fd447" %)5.6.2 System ~-~-> General ( login settings)(%%) ===
806 +
807 +
808 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png"]]
809 +
821 821  (((
822 -(% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
811 +
812 +
813 +(% data-sider-select-id="be43359c-6dc0-4f21-a3e8-95fb8b9622d4" %)
814 +There are two login for DLOS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
823 823  )))
824 824  
825 825  (((
826 -(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
818 +This page can be used to set the password for them.
827 827  )))
828 828  
829 829  (((
830 -(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
831 -
832 -
822 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
833 833  )))
834 834  
835 -=== 5.5.4 System ~-~-> WiFi ===
825 +(((
826 +(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
827 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
836 836  
829 +(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
830 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
837 837  
838 -DLOS8N WiFi Settings.
832 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
839 839  
834 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
840 840  
841 -[[image:image-20220916134831-13.png||height="426" width="909"]](% style="display:none" %)
836 +(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
837 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
842 842  
843 843  
844 -=== 5.5.5 System ~-~-> Cellular ===
840 +=== 5.6.3 System ~-~-> Backup/Restore Config ===
845 845  
846 846  
847 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
843 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
848 848  
849 849  
850 -[[image:image-20220916135100-14.png||height="364" width="917"]]
846 +=== 5.6.4 System ~-~-> Remote.it ===
851 851  
852 852  
853 -(% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
849 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
854 854  
851 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
855 855  
856 -=== 5.5.6 System ~-~-> Network Status ===
853 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
857 857  
858 858  
859 -[[image:image-20220916135207-15.png||height="630" width="926"]]
856 +=== (% data-sider-select-id="730a4b6f-6adf-4db6-bccf-f911bfed1354" %)5.6.5 System ~-~-> Remote Mgnt & Auto Provision(%%) ===
860 860  
861 861  
862 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
863 -
864 -
865 865  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
866 866  
867 867  
... ... @@ -884,7 +884,7 @@
884 884  [[image:image-20220916140017-16.png||height="619" width="911"]]
885 885  
886 886  
887 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
881 +=== (% data-sider-select-id="a2b72367-c22f-4274-9fe5-109ef8008b8e" %)5.6.6 System ~-~-> Firmware Upgrade(%%) ===
888 888  
889 889  
890 890  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -929,7 +929,7 @@
929 929  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
930 930  
931 931  
932 -=== 5.5.9 System ~-~-> Reboot/Reset ===
926 +=== (% data-sider-select-id="07bc9f06-7099-42c0-964c-149f601f3627" %)5.6.7 System ~-~-> Reboot/Reset(%%) ===
933 933  
934 934  
935 935  [[image:image-20220916140312-18.png||height="286" width="909"]]
... ... @@ -938,47 +938,82 @@
938 938  
939 939  )))
940 940  
941 -=== 5.5.10 System ~-~-> Package Maintain ===
935 +=== (% data-sider-select-id="2ceda713-1253-4788-9e11-0dd9d81977b3" %)5.6.8 System ~-~-> Package Maintain(%%) ===
942 942  
943 943  
944 944  [[image:image-20220916140421-19.png||height="715" width="904"]]
945 945  
946 -
947 947  Place to show what package has installed and possible to upgrade packages.
948 948  
949 949  
950 -== 5.6 LogRead ==
943 +== (% data-sider-select-id="79337028-35c7-4229-a401-04b91f009ce3" %)5.7 LogRead(%%) ==
951 951  
952 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
945 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
953 953  
954 954  (% style="display:none" %) (%%)
955 955  
956 -Show the frequency for LoRa Radio and traffics.
949 +(% data-sider-select-id="b7ed19c4-acf7-4583-9e50-5cd99c4cdeae" %)
950 +Show the frequency for LoRa Radio:
957 957  
958 -
959 959  [[image:image-20220916140549-20.png||height="729" width="877"]]
960 960  
961 961  
962 -=== 5.6.2 LogRead ~-~-> System Log ===
963 963  
956 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
964 964  
965 -Show the system log
966 966  
959 +(% data-sider-select-id="e9787126-554a-4bb4-8f31-ab2ce0e55165" %)
960 +Show the gateway traffic:
967 967  
962 +[[image:image-20240416112159-1.png||height="610" width="872"]]
963 +
964 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.3 LogRead ~-~-> System Log(%%) ===
965 +
966 +
967 +Show the system log
968 +
968 968  [[image:image-20220916140732-21.png||height="710" width="872"]]
969 969  
970 970  
971 -= 6. More features =
972 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.4 LogRead ~-~-> (%%)Record Log(% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %) (%%) ===
972 972  
973 -== 6.1 Packet Filtering ==
974 974  
975 +This interface can record gateway logs:
975 975  
977 +[[image:image-20240416112510-2.png||height="296" width="870"]]
978 +
979 += (% data-sider-select-id="53575777-5441-4a56-84e2-d3a229a8ece3" %)6. More features(%%) =
980 +
981 +
982 +== (% data-sider-select-id="2ef025e3-4214-4b1c-bb01-ee03e1db2bc2" %)6.1 NTP Service/Time Synchronization(%%) ==
983 +
984 +The gateway time sync service is provided by ntpd
985 +
986 +=== 1). Modify the NTP server address: ===
987 +
988 +(% class="box" %)
989 +(((
990 +uci set system.ntp.server='0.openwrt.pool.ntp.org'
991 +
992 +uci add_list system.ntp.server='1.openwrt.pool.ntp.org'
993 +
994 +uci add_list system.ntp.server='2.openwrt.pool.ntp.org'
995 +
996 +uci add_list system.ntp.server='3.openwrt.pool.ntp.org'
997 +
998 +uci commit system
999 +)))
1000 +
1001 +
1002 +== (% data-sider-select-id="68c5d9c8-0690-4e39-abae-0a921c179211" %)6.2 Packet Filtering(%%) ==
1003 +
1004 +
976 976  Drop unwanted packets.
977 977  
978 978  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
979 979  
980 980  
981 -== 6.2 Remote Access ==
1010 +== (% data-sider-select-id="6b98cd6d-f2db-4647-ae38-aee4a3d7227b" %)6.3 Remote Access(%%) ==
982 982  
983 983  
984 984  Remote Access Devices for management.
... ... @@ -986,7 +986,7 @@
986 986  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
987 987  
988 988  
989 -== 6.3 How to decode ABP LoRaWAN node ==
1018 +== (% data-sider-select-id="8084465c-aa6f-4536-b97d-383cd952e46c" %)6.4 How to decode ABP LoRaWAN node(%%) ==
990 990  
991 991  
992 992  Decode ABP:
... ... @@ -994,7 +994,7 @@
994 994  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
995 995  
996 996  
997 -== 6.4 How to set data to MQTT broker ==
1026 +== (% data-sider-select-id="a4a3d7bb-c435-47b3-a926-46788a4f9e6f" %)6.5 How to set data to MQTT broker(%%) ==
998 998  
999 999  
1000 1000  Only support ABP LoRaWAN End Node
... ... @@ -1002,7 +1002,7 @@
1002 1002  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1003 1003  
1004 1004  
1005 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1034 +== (% data-sider-select-id="0074e70a-5030-4401-916c-b12bd0557d05" %)6.6 How the gateway connects to Chirpstack v3/v4 via gateway-bridge(%%) ==
1006 1006  
1007 1007  
1008 1008  If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
... ... @@ -1009,7 +1009,7 @@
1009 1009  
1010 1010  [[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
1011 1011  
1012 -Chirpstack v3 via gateway-bridge Instruction: [[https:~~/~~/www.chirpstack.io/gateway-bridge/gateway/dragino/>>url:https://www.chirpstack.io/gateway-bridge/gateway/dragino/]]
1041 +Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
1013 1013  
1014 1014  
1015 1015  If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
... ... @@ -1024,9 +1024,57 @@
1024 1024  After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1025 1025  
1026 1026  
1027 -== 6.6  More instructions ==
1056 +== (% data-sider-select-id="c6cadb28-a27e-4499-92bb-189a644b8fda" %)6.7  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive).(%%) ==
1028 1028  
1029 1029  
1059 +USB card reader plugged into the USB port of the gateway.
1060 +
1061 +Access the gateway Linux Command Line.
1062 +
1063 +
1064 +Check the USB device
1065 +
1066 +[[image:image-20230425165308-2.png]]
1067 +
1068 +
1069 +**Mount the USB device**
1070 +
1071 +(% class="box infomessage" %)
1072 +(((
1073 +mount /dev/sda1 /mnt/
1074 +)))
1075 +
1076 +[[image:image-20230425174131-4.png]]
1077 +
1078 +
1079 +
1080 +**Set up the automatic mount on boot**
1081 +
1082 +
1083 +(% class="box infomessage" %)
1084 +(((
1085 +**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1086 +)))
1087 +
1088 +[[image:image-20230425173831-3.png||height="105" width="833"]]
1089 +
1090 +
1091 +== (% data-sider-select-id="2f4b3d14-0080-4223-bc52-d74facde85a6" %)6.8  How to view DLOS8N GPS information(%%) ==
1092 +
1093 +
1094 +By default, when the DLOS8N GPS positioning is complete, it will be displayed in the state package on the **LogRead ~-~-> System Log**  interface.
1095 +
1096 +[[image:image-20230508134051-1.png||height="696" width="922"]]
1097 +
1098 +
1099 +When the gateway is registered with the TTN server, the GPS information is also displayed in the TTN log.
1100 +
1101 +[[image:image-20230508134603-2.png||height="435" width="927"]]
1102 +
1103 +
1104 +== (% data-sider-select-id="9c733551-ff43-41d9-9c06-2a6157a6b46f" %)6.9  More instructions(%%) ==
1105 +
1106 +
1030 1030  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1031 1031  
1032 1032  
... ... @@ -1041,13 +1041,13 @@
1041 1041  
1042 1042  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1043 1043  
1044 -IP address:  IP address of DLOS8N
1121 +**IP address:  ** IP address of DLOS8N
1045 1045  
1046 -Port:  22 (via WiFi AP mode) or 2222 (via WAN Interface)
1123 +**Port:  ** 22 (via WiFi AP mode) or 2222 (via WAN Interface)
1047 1047  
1048 -User Name:      (% style="color:green" %)**root**
1125 +**User Name: ** (% style="color:green" %)**root**
1049 1049  
1050 -Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1127 +**Password:**         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1051 1051  
1052 1052  After logging in, you will be in the Linux console and can enter commands as shown below.
1053 1053  
... ... @@ -1119,7 +1119,7 @@
1119 1119  )))
1120 1120  
1121 1121  (((
1122 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1199 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/ shows the available packages
1123 1123  )))
1124 1124  
1125 1125  (((
... ... @@ -1336,8 +1336,6 @@
1336 1336  
1337 1337  
1338 1338  As below photo:
1339 -
1340 -
1341 1341  )))
1342 1342  
1343 1343  [[image:1652435256286-879.png]]
... ... @@ -1349,22 +1349,33 @@
1349 1349  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1350 1350  
1351 1351  
1427 +(% data-sider-select-id="f9e9779e-261d-4a53-9ba6-a4d1c45cec19" %)
1428 +== 11.4  Why does the gateway reboot every 15 minutes without Internet? ==
1429 +
1430 +(% data-sider-select-id="77a3f493-29a0-4e57-a8ac-cd19e74d463d" %)
1431 +Check whether Internet Detect is enabled on the (% data-sider-select-id="98a5126a-698d-4dc1-af3b-b62ed09b2db0" %)**System~-~->General**(%%) interface.
1432 +
1433 +Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1434 +
1435 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1436 +
1437 +
1352 1352  = 12. Order Info =
1353 1353  
1354 1354  
1355 - **//PART: (% style="color:blue" %)DLOS8N-XXX-YYY//(%%)**
1441 + **PART: (% style="color:blue" %)DLOS8N-XXX-YYY(%%)**
1356 1356  
1357 -(% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1443 +(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1358 1358  
1359 1359  * (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1360 1360  * (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1361 1361  
1362 -(% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1448 +(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1363 1363  
1364 -* (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1365 -* (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1366 -* (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1367 -* (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1450 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1451 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1452 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1453 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1368 1368  
1369 1369  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1370 1370  
... ... @@ -1401,3 +1401,4 @@
1401 1401  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1402 1402  
1403 1403  
1490 +)))
image-20230425165215-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20230425165308-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +32.5 KB
Content
image-20230425173831-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +7.3 KB
Content
image-20230425174131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +8.4 KB
Content
image-20230508134051-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.2 KB
Content
image-20230508134603-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
image-20240416112159-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +161.4 KB
Content
image-20240416112510-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.3 KB
Content
image-20240517101310-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0