Last modified by Kilight Cao on 2025/03/20 16:02
<
From version < 176.1 >
edited by Edwin Chen
on 2022/12/28 10:51
To version < 201.1 >
edited by Kilight Cao
on 2024/05/17 10:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Kilight
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -24,15 +24,15 @@
24 24  
25 25  
26 26  (((
27 -The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
27 +The DLOS8N is an** (% style="color:blue" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:blue" %). (%%)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
28 28  )))
29 29  
30 30  (((
31 -DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
31 +DLOS8N supports (% style="color:blue" %)**Semtech packet forwarder** (%%)and (% style="color:blue" %)**LoRaWAN Station connection**, (%%)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator.**
32 32  )))
33 33  
34 34  (((
35 -DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
35 +DLOS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands** (%%)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
36 36  )))
37 37  
38 38  (((
... ... @@ -40,7 +40,7 @@
40 40  )))
41 41  
42 42  (((
43 -DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
43 +DLOS8N supports (% style="color:blue" %)**auto-provision** (%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
44 44  
45 45  
46 46  )))
... ... @@ -94,7 +94,7 @@
94 94  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
95 95  * 70 dB CW interferer rejection at 1 MHz offset
96 96  * Able to operate with negative SNR, CCR up to 9dB
97 -* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
97 +* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
98 98  * Dual digital TX & RX radio front-end interfaces
99 99  * 10 programmable parallel demodulation paths
100 100  * Dynamic data-rate (DDR) adaptation
... ... @@ -119,7 +119,6 @@
119 119  * Isolation level 4 KVrms.
120 120  * Enhanced surge protection
121 121  
122 -
123 123  == 1.3 Features ==
124 124  
125 125  
... ... @@ -140,8 +140,8 @@
140 140  * IP65
141 141  * Lighting Protection
142 142  * Power Consumption:12v ,300-500mA
142 +* Operating Temperature： -20~~85°C
143 143  
144 -
145 145  == 1.4 Hardware System Structure ==
146 146  
147 147  
... ... @@ -201,7 +201,6 @@
201 201  
202 202  DLOS8N use directional WiFi Antenna. The best direction is as below:
203 203  
204 -
205 205  [[image:1652412859663-161.png||height="341" width="333"]]
206 206  
207 207  
... ... @@ -221,7 +221,6 @@
221 221  
222 222  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
223 223  
224 -
225 225  [[image:1652413127647-377.png]]
226 226  
227 227  
... ... @@ -260,7 +260,7 @@
260 260  
261 261  
262 262  (((
263 -The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
260 +The WAN port also has a [[fall back ip address>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
264 264  )))
265 265  
266 266  
... ... @@ -302,14 +302,11 @@
302 302  * **WiFi AP Mode**
303 303  * **Cellular Mode**
304 304  
305 -
306 306  == 3.2 Use WAN port to access Internet ==
307 307  
308 308  
309 309  (((
310 310  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
311 -
312 -
313 313  )))
314 314  
315 315  [[image:image-20220916112129-1.png||height="414" width="887"]]
... ... @@ -325,14 +325,11 @@
325 325  (((
326 326  (((
327 327  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
328 -
329 -
330 330  )))
331 331  )))
332 332  
333 333  [[image:image-20220916142159-25.png||height="406" width="877"]](% style="display:none" %)
334 334  
335 -
336 336  (((
337 337  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
338 338  
... ... @@ -371,8 +371,6 @@
371 371  
372 372  (((
373 373  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
374 -
375 -
376 376  )))
377 377  
378 378  (((
... ... @@ -401,8 +401,6 @@
401 401  
402 402  (((
403 403  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
404 -
405 -
406 406  )))
407 407  
408 408  (((
... ... @@ -419,8 +419,6 @@
419 419  
420 420  (((
421 421  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
422 -
423 -
424 424  )))
425 425  
426 426  (((
... ... @@ -436,17 +436,14 @@
436 436  The example gateway id is: (% style="color:green" %)**a840411e96744154**
437 437  
438 438  
439 -
440 440  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
441 441  
442 442  
443 443  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
444 444  
445 -
446 446  [[image:1652422127479-258.png||height="346" width="738"]]
447 447  
448 448  
449 -
450 450  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
451 451  
452 452  
... ... @@ -464,7 +464,6 @@
464 464  * Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
465 465  * Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
466 466  
467 -
468 468  (% style="color:blue" %)**Step 4: Create a Gateway**
469 469  
470 470  
... ... @@ -489,7 +489,6 @@
489 489  
490 490  After creating the gateway, you can see the gateway info, as below.
491 491  
492 -
493 493  [[image:1657089571089-281.png]]
494 494  
495 495  
... ... @@ -506,8 +506,6 @@
506 506  
507 507  (((
508 508  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
509 -
510 -
511 511  )))
512 512  
513 513  [[image:1657089586062-302.png]]
... ... @@ -533,7 +533,6 @@
533 533  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
534 534  )))
535 535  
536 -
537 537  [[image:1652422737399-529.png||height="362" width="737"]]
538 538  
539 539  
... ... @@ -542,7 +542,7 @@
542 542   [[image:1652422763536-750.png||height="514" width="730"]]
543 543  
544 544  
545 -== 4.4 Add a LoRaWAN End Device ==
522 +== (% data-sider-select-id="5bc80c23-9f00-4475-8de0-dc684ffabb7d" %)4.4 Add a LoRaWAN End Device(%%) ==
546 546  
547 547  
548 548  (((
... ... @@ -656,7 +656,6 @@
656 656  
657 657  Shows the system running status.
658 658  
659 -
660 660  [[image:image-20220916113702-4.png||height="331" width="727"]]
661 661  
662 662  
... ... @@ -680,13 +680,10 @@
680 680  
681 681  
682 682  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
683 -
684 -
685 685  )))
686 686  
687 687  [[image:image-20220916114014-5.png||height="429" width="930"]]
688 688  
689 -
690 690  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
691 691  
692 692  
... ... @@ -702,24 +702,21 @@
702 702  
703 703  (((
704 704  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
705 -
706 -
707 707  )))
708 708  
709 709  [[image:image-20220916114346-7.png||height="363" width="886"]]
710 710  
711 711  
712 -== 5.3 LoRaWAN Settings ==
683 +== (% data-sider-select-id="e4f0e724-e454-4aa9-adc3-2d2fb381a93c" %)5.3 LoRaWAN Settings(%%) ==
713 713  
714 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
685 +=== (% data-sider-select-id="46832cd3-1415-4286-a897-1fbda6ed3a2a" %)5.3.1 LoRaWAN ~-~-> Semtech UDP(%%) ===
715 715  
716 716  
717 717  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
718 718  
690 +[[image:image-20240517101310-1.png||height="656" width="879"]]
719 719  
720 -[[image:image-20220916114929-8.png||height="716" width="871"]]
721 721  
722 -
723 723  (% style="color:red" %)**Note:**
724 724  
725 725  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
... ... @@ -729,14 +729,19 @@
729 729  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
730 730  
731 731  
732 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
702 +=== 5.3.2 LoRaWAN ~-~-> Basic Station ===
733 733  
734 734  
735 -[[image:1657089933044-221.png]]
705 +[[image:image-20230415172432-1.png||height="461" width="868"]]
736 736  
707 +Introduction for the use of LoRaWAN Basic for different servers:
737 737  
738 738  (((
739 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
710 +* Introduction to using with [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]].
711 +* Introduction to using with [[TTN>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.GatewayRegistrationforBasicsStation]].
712 +* Introduction to using with [[ChirpStack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.GatewayRegistrationforBasicsStation]].
713 +* Introduction to using with [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.SemtechBasicStation]].
714 +* Introduction to using with [[Actility Thingpark Enterprise>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Actility%20ThingPark%20Enterprise/]].
740 740  
741 741  
742 742  )))
... ... @@ -750,14 +750,12 @@
750 750  
751 751  (((
752 752  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
753 -
754 -
755 755  )))
756 756  
757 757  [[image:image-20220916115143-9.png||height="314" width="858"]]
758 758  
759 759  
760 -== 5.4 MQTT Settings ==
733 +== (% data-sider-select-id="30ceca0a-d0e8-4382-ac5a-59bebcb19c51" %)5.4 MQTT Settings(%%) ==
761 761  
762 762  
763 763  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -764,99 +764,125 @@
764 764  
765 765  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
766 766  
767 -
768 768  [[image:1657090037148-906.png]]
769 769  
770 770  
771 -== 5.5 System ==
743 +== 5.5  Network ==
772 772  
773 -=== 5.5.1 System ~-~-> System Overview ===
745 +=== 5.5.1  Network ~-~-> Network Status ===
774 774  
775 775  
776 -Shows the system info:
748 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
777 777  
778 778  
779 -[[image:image-20220916133758-10.png||height="611" width="865"]]
751 +(% data-sider-select-id="5ec9b41d-26fb-4b6f-8f48-4c2f2c564c53" %)
752 +=== 5.5.2  Network ~-~-> Network ===
780 780  
781 781  
782 -=== 5.5.2 System ~-~-> General ( login settings) ===
783 -
784 -
785 -[[image:image-20220916134411-11.png||height="505" width="875"]]
786 -
787 -
788 788  (((
789 -(% style="color:#037691" %)**__System Password:__**
756 +(% data-sider-select-id="80d07254-c65e-47a2-86b6-8e6220924c25" %)
757 +(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
790 790  )))
791 791  
792 792  (((
793 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
761 +(% data-sider-select-id="d9954e50-7f68-4249-b699-61f53219fb57" %)
762 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for DLOS8N WAN port
794 794  )))
795 795  
796 796  (((
797 -This page can be used to set the password for them.
766 +(% data-sider-select-id="c87bbc6b-c98a-416d-a0a1-03f1ed827688" %)
767 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
798 798  )))
799 799  
800 -(((
801 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
802 -)))
770 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
803 803  
804 -(((
805 -(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
806 806  
807 -
808 -)))
773 +=== 5.5.3  Network ~-~-> WiFi ===
809 809  
810 -=== 5.5.3 System ~-~-> Network ===
811 811  
776 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
777 +DLOS8N WiFi Settings.
812 812  
813 -[[image:image-20220916134642-12.png||height="417" width="886"]]
779 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
780 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
814 814  
815 815  
783 +=== 5.5.4  Network ~-~-> Cellular ===
784 +
785 +
786 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
787 +
788 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
789 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
790 +
791 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
792 +(% data-sider-select-id="1470493c-3c33-42a0-89eb-132d9554b028" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
793 +
794 +
795 +== (% data-sider-select-id="b34f40d0-e802-4e45-8a8c-6620e692699e" %)5.6 System(%%) ==
796 +
797 +=== (% data-sider-select-id="0d466e95-c71d-43c8-9e78-cc547eea894f" %)5.6.1 System ~-~-> System Overview(%%) ===
798 +
799 +
800 +Shows the system info:
801 +
802 +[[image:image-20220916133758-10.png||height="611" width="865"]]
803 +
804 +
805 +=== (% data-sider-select-id="dfb74220-f4d5-45ee-89d6-758b065fd447" %)5.6.2 System ~-~-> General ( login settings)(%%) ===
806 +
807 +
808 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png"]]
809 +
816 816  (((
817 -(% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
811 +
812 +
813 +(% data-sider-select-id="be43359c-6dc0-4f21-a3e8-95fb8b9622d4" %)
814 +There are two login for DLOS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
818 818  )))
819 819  
820 820  (((
821 -(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
818 +This page can be used to set the password for them.
822 822  )))
823 823  
824 824  (((
825 -(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
826 -
827 -
822 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
828 828  )))
829 829  
830 -=== 5.5.4 System ~-~-> WiFi ===
825 +(((
826 +(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
827 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
831 831  
829 +(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
830 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
832 832  
833 -DLOS8N WiFi Settings.
832 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
834 834  
834 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
835 835  
836 -[[image:image-20220916134831-13.png||height="426" width="909"]](% style="display:none" %)
836 +(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
837 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
837 837  
838 838  
839 -=== 5.5.5 System ~-~-> Cellular ===
840 +=== 5.6.3 System ~-~-> Backup/Restore Config ===
840 840  
841 841  
842 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
843 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
843 843  
844 844  
845 -[[image:image-20220916135100-14.png||height="364" width="917"]]
846 +=== 5.6.4 System ~-~-> Remote.it ===
846 846  
847 847  
848 -(% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
849 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
849 849  
851 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
850 850  
851 -=== 5.5.6 System ~-~-> Network Status ===
853 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
852 852  
853 853  
854 -[[image:image-20220916135207-15.png||height="630" width="926"]]
856 +=== (% data-sider-select-id="730a4b6f-6adf-4db6-bccf-f911bfed1354" %)5.6.5 System ~-~-> Remote Mgnt & Auto Provision(%%) ===
855 855  
856 856  
857 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
858 -
859 -
860 860  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
861 861  
862 862  
... ... @@ -879,7 +879,7 @@
879 879  [[image:image-20220916140017-16.png||height="619" width="911"]]
880 880  
881 881  
882 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
881 +=== (% data-sider-select-id="a2b72367-c22f-4274-9fe5-109ef8008b8e" %)5.6.6 System ~-~-> Firmware Upgrade(%%) ===
883 883  
884 884  
885 885  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -924,7 +924,7 @@
924 924  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
925 925  
926 926  
927 -=== 5.5.9 System ~-~-> Reboot/Reset ===
926 +=== (% data-sider-select-id="07bc9f06-7099-42c0-964c-149f601f3627" %)5.6.7 System ~-~-> Reboot/Reset(%%) ===
928 928  
929 929  
930 930  [[image:image-20220916140312-18.png||height="286" width="909"]]
... ... @@ -933,41 +933,178 @@
933 933  
934 934  )))
935 935  
936 -=== 5.5.10 System ~-~-> Package Maintain ===
935 +=== (% data-sider-select-id="2ceda713-1253-4788-9e11-0dd9d81977b3" %)5.6.8 System ~-~-> Package Maintain(%%) ===
937 937  
938 938  
939 939  [[image:image-20220916140421-19.png||height="715" width="904"]]
940 940  
941 -
942 942  Place to show what package has installed and possible to upgrade packages.
943 943  
944 944  
945 -== 5.6 LogRead ==
943 +== (% data-sider-select-id="79337028-35c7-4229-a401-04b91f009ce3" %)5.7 LogRead(%%) ==
946 946  
947 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
945 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
948 948  
949 949  (% style="display:none" %) (%%)
950 950  
951 -Show the frequency for LoRa Radio and traffics.
949 +(% data-sider-select-id="b7ed19c4-acf7-4583-9e50-5cd99c4cdeae" %)
950 +Show the frequency for LoRa Radio:
952 952  
953 -
954 954  [[image:image-20220916140549-20.png||height="729" width="877"]]
955 955  
956 956  
957 -=== 5.6.2 LogRead ~-~-> System Log ===
958 958  
956 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
959 959  
960 -Show the system log
961 961  
959 +(% data-sider-select-id="e9787126-554a-4bb4-8f31-ab2ce0e55165" %)
960 +Show the gateway traffic:
962 962  
962 +[[image:image-20240416112159-1.png||height="610" width="872"]]
963 +
964 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.3 LogRead ~-~-> System Log(%%) ===
965 +
966 +
967 +Show the system log
968 +
963 963  [[image:image-20220916140732-21.png||height="710" width="872"]]
964 964  
965 965  
966 -= 6. More features =
972 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.4 LogRead ~-~-> (%%)Record Log(% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %) (%%) ===
967 967  
968 -== 6.1 More instructions ==
969 969  
975 +This interface can record gateway logs:
970 970  
977 +[[image:image-20240416112510-2.png||height="296" width="870"]]
978 +
979 += (% data-sider-select-id="53575777-5441-4a56-84e2-d3a229a8ece3" %)6. More features(%%) =
980 +
981 +
982 +== (% data-sider-select-id="2ef025e3-4214-4b1c-bb01-ee03e1db2bc2" %)6.1 NTP Service/Time Synchronization(%%) ==
983 +
984 +The gateway time sync service is provided by ntpd
985 +
986 +=== 1). Modify the NTP server address: ===
987 +
988 +(% class="box" %)
989 +(((
990 +uci set system.ntp.server='0.openwrt.pool.ntp.org'
991 +
992 +uci add_list system.ntp.server='1.openwrt.pool.ntp.org'
993 +
994 +uci add_list system.ntp.server='2.openwrt.pool.ntp.org'
995 +
996 +uci add_list system.ntp.server='3.openwrt.pool.ntp.org'
997 +
998 +uci commit system
999 +)))
1000 +
1001 +
1002 +== (% data-sider-select-id="68c5d9c8-0690-4e39-abae-0a921c179211" %)6.2 Packet Filtering(%%) ==
1003 +
1004 +
1005 +Drop unwanted packets.
1006 +
1007 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
1008 +
1009 +
1010 +== (% data-sider-select-id="6b98cd6d-f2db-4647-ae38-aee4a3d7227b" %)6.3 Remote Access(%%) ==
1011 +
1012 +
1013 +Remote Access Devices for management.
1014 +
1015 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
1016 +
1017 +
1018 +== (% data-sider-select-id="8084465c-aa6f-4536-b97d-383cd952e46c" %)6.4 How to decode ABP LoRaWAN node(%%) ==
1019 +
1020 +
1021 +Decode ABP:
1022 +
1023 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
1024 +
1025 +
1026 +== (% data-sider-select-id="a4a3d7bb-c435-47b3-a926-46788a4f9e6f" %)6.5 How to set data to MQTT broker(%%) ==
1027 +
1028 +
1029 +Only support ABP LoRaWAN End Node
1030 +
1031 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1032 +
1033 +
1034 +== (% data-sider-select-id="0074e70a-5030-4401-916c-b12bd0557d05" %)6.6 How the gateway connects to Chirpstack v3/v4 via gateway-bridge(%%) ==
1035 +
1036 +
1037 +If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
1038 +
1039 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
1040 +
1041 +Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
1042 +
1043 +
1044 +If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
1045 +
1046 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
1047 +
1048 +Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
1049 +
1050 +
1051 +(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
1052 +
1053 +After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1054 +
1055 +
1056 +== (% data-sider-select-id="c6cadb28-a27e-4499-92bb-189a644b8fda" %)6.7  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive).(%%) ==
1057 +
1058 +
1059 +USB card reader plugged into the USB port of the gateway.
1060 +
1061 +Access the gateway Linux Command Line.
1062 +
1063 +
1064 +Check the USB device
1065 +
1066 +[[image:image-20230425165308-2.png]]
1067 +
1068 +
1069 +**Mount the USB device**
1070 +
1071 +(% class="box infomessage" %)
1072 +(((
1073 +mount /dev/sda1 /mnt/
1074 +)))
1075 +
1076 +[[image:image-20230425174131-4.png]]
1077 +
1078 +
1079 +
1080 +**Set up the automatic mount on boot**
1081 +
1082 +
1083 +(% class="box infomessage" %)
1084 +(((
1085 +**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1086 +)))
1087 +
1088 +[[image:image-20230425173831-3.png||height="105" width="833"]]
1089 +
1090 +
1091 +== (% data-sider-select-id="2f4b3d14-0080-4223-bc52-d74facde85a6" %)6.8  How to view DLOS8N GPS information(%%) ==
1092 +
1093 +
1094 +By default, when the DLOS8N GPS positioning is complete, it will be displayed in the state package on the **LogRead ~-~-> System Log**  interface.
1095 +
1096 +[[image:image-20230508134051-1.png||height="696" width="922"]]
1097 +
1098 +
1099 +When the gateway is registered with the TTN server, the GPS information is also displayed in the TTN log.
1100 +
1101 +[[image:image-20230508134603-2.png||height="435" width="927"]]
1102 +
1103 +
1104 +== (% data-sider-select-id="9c733551-ff43-41d9-9c06-2a6157a6b46f" %)6.9  More instructions(%%) ==
1105 +
1106 +
971 971  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
972 972  
973 973  
... ... @@ -982,13 +982,13 @@
982 982  
983 983  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
984 984  
985 -IP address:  IP address of DLOS8N
1121 +**IP address:  ** IP address of DLOS8N
986 986  
987 -Port:  22 (via WiFi AP mode) or 2222 (via WAN Interface)
1123 +**Port:  ** 22 (via WiFi AP mode) or 2222 (via WAN Interface)
988 988  
989 -User Name:      (% style="color:green" %)**root**
1125 +**User Name: ** (% style="color:green" %)**root**
990 990  
991 -Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1127 +**Password:**         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
992 992  
993 993  After logging in, you will be in the Linux console and can enter commands as shown below.
994 994  
... ... @@ -1060,7 +1060,7 @@
1060 1060  )))
1061 1061  
1062 1062  (((
1063 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1199 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/ shows the available packages
1064 1064  )))
1065 1065  
1066 1066  (((
... ... @@ -1100,7 +1100,7 @@
1100 1100  
1101 1101  )))
1102 1102  
1103 -= 8.  Upgrade Linux Firmware =
1239 += 8. Upgrade Linux Firmware =
1104 1104  
1105 1105  
1106 1106  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -1119,7 +1119,7 @@
1119 1119  )))
1120 1120  
1121 1121  
1122 -== 8.1 Upgrade via Web UI ==
1258 +== 8.1 Upgrade via Web UI ==
1123 1123  
1124 1124  
1125 1125  (((
... ... @@ -1145,7 +1145,7 @@
1145 1145  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657158986600-386.png?rev=1.1||alt="1657158986600-386.png"]]
1146 1146  
1147 1147  
1148 -== 8.2 Upgrade via Linux console ==
1284 +== 8.2 Upgrade via Linux console ==
1149 1149  
1150 1150  
1151 1151  (((
... ... @@ -1164,6 +1164,7 @@
1164 1164  
1165 1165  = 9. OTA System Update =
1166 1166  
1303 +
1167 1167  DLOS8N supports system auto update via OTA, please see **[[this URL>>doc:OTA Update.WebHome]]** for the detail of this feature.
1168 1168  
1169 1169  
... ... @@ -1276,8 +1276,6 @@
1276 1276  
1277 1277  
1278 1278  As below photo:
1279 -
1280 -
1281 1281  )))
1282 1282  
1283 1283  [[image:1652435256286-879.png]]
... ... @@ -1289,22 +1289,33 @@
1289 1289  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1290 1290  
1291 1291  
1427 +(% data-sider-select-id="f9e9779e-261d-4a53-9ba6-a4d1c45cec19" %)
1428 +== 11.4  Why does the gateway reboot every 15 minutes without Internet? ==
1429 +
1430 +(% data-sider-select-id="77a3f493-29a0-4e57-a8ac-cd19e74d463d" %)
1431 +Check whether Internet Detect is enabled on the (% data-sider-select-id="98a5126a-698d-4dc1-af3b-b62ed09b2db0" %)**System~-~->General**(%%) interface.
1432 +
1433 +Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1434 +
1435 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1436 +
1437 +
1292 1292  = 12. Order Info =
1293 1293  
1294 1294  
1295 - **//PART: (% style="color:blue" %)DLOS8N-XXX-YYY//(%%)**
1441 + **PART: (% style="color:blue" %)DLOS8N-XXX-YYY(%%)**
1296 1296  
1297 -(% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1443 +(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1298 1298  
1299 1299  * (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1300 1300  * (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1301 1301  
1302 -(% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1448 +(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1303 1303  
1304 -* (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1305 -* (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1306 -* (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1307 -* (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1450 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1451 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1452 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1453 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1308 1308  
1309 1309  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1310 1310  
... ... @@ -1341,3 +1341,4 @@
1341 1341  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1342 1342  
1343 1343  
1490 +)))
image-20230415172432-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20230425165215-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20230425165308-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +32.5 KB
Content
image-20230425173831-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +7.3 KB
Content
image-20230425174131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +8.4 KB
Content
image-20230508134051-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.2 KB
Content
image-20230508134603-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
image-20240416112159-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +161.4 KB
Content
image-20240416112510-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.3 KB
Content
image-20240517101310-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0