Last modified by Kilight Cao on 2025/03/20 16:02
<
From version < 170.1 >
edited by Kilight Cao
on 2022/11/03 11:34
To version < 200.1 >
edited by Kilight Cao
on 2024/05/17 10:14
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  
9 9  
10 -**Table of Contents：**
10 +**Table of Contents:**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -20,20 +20,19 @@
20 20  
21 21  = 1. Introduction =
22 22  
23 -
24 24  == 1.1 What is the DLOS8N ==
25 25  
26 26  
27 27  (((
28 -The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
27 +The DLOS8N is an** (% style="color:blue" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:blue" %). (%%)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 29  )))
30 30  
31 31  (((
32 -DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
31 +DLOS8N supports (% style="color:blue" %)**Semtech packet forwarder** (%%)and (% style="color:blue" %)**LoRaWAN Station connection**, (%%)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator.**
33 33  )))
34 34  
35 35  (((
36 -DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
35 +DLOS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands** (%%)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
37 37  )))
38 38  
39 39  (((
... ... @@ -41,7 +41,7 @@
41 41  )))
42 42  
43 43  (((
44 -DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
43 +DLOS8N supports (% style="color:blue" %)**auto-provision** (%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
45 45  
46 46  
47 47  )))
... ... @@ -49,7 +49,6 @@
49 49  [[image:1652411526195-923.png||height="494" width="731"]]
50 50  
51 51  
52 -
53 53  == 1.2 Specifications ==
54 54  
55 55  
... ... @@ -96,7 +96,7 @@
96 96  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
97 97  * 70 dB CW interferer rejection at 1 MHz offset
98 98  * Able to operate with negative SNR, CCR up to 9dB
99 -* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
97 +* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
100 100  * Dual digital TX & RX radio front-end interfaces
101 101  * 10 programmable parallel demodulation paths
102 102  * Dynamic data-rate (DDR) adaptation
... ... @@ -128,6 +128,7 @@
128 128  * Managed by Web GUI, SSH via LAN or WiFi
129 129  * Support Semtech UDP packet forwarder
130 130  * Support LoRaWAN Station Connection
129 +* Support MQTTS
131 131  * Cellular Failover conntection(option)
132 132  * Direct Communication to LoRaWAN ABP Node
133 133  * LoRaWAN packet filtering
... ... @@ -140,6 +140,7 @@
140 140  * IP65
141 141  * Lighting Protection
142 142  * Power Consumption:12v ,300-500mA
142 +* Operating Temperature： -20~~85°C
143 143  
144 144  == 1.4 Hardware System Structure ==
145 145  
... ... @@ -147,7 +147,6 @@
147 147  [[image:image-20220907154423-1.png]]
148 148  
149 149  
150 -
151 151  == 1.5 DLOS8N Applications ==
152 152  
153 153  
... ... @@ -154,7 +154,6 @@
154 154  [[image:image-20220916144221-26.png]]
155 155  
156 156  
157 -
158 158  == 1.6 LED Indicators ==
159 159  
160 160  
... ... @@ -175,23 +175,36 @@
175 175  )))
176 176  * (((
177 177  (% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn't have Internet connection.
176 +
178 178  
179 -
180 -
181 181  
182 182  )))
183 183  )))
184 184  
185 -== 1.7 WiFi Direction ==
182 +== 1.7 Button Instruction ==
186 186  
187 187  
188 -DLOS8N use directional WiFi Antenna. The best direction is as below:
185 +DLOS8N has a black toggle button, which is:
189 189  
190 190  
191 -[[image:1652412859663-161.png||height="341" width="333"]]
188 +(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
192 192  
190 + **LED status: ** LED will BLINKING GREEN Until the reload is finished.
193 193  
194 194  
193 +(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
194 +
195 + **LED status: ** When the user releases the button, the LED will TURN OFF.
196 +
197 +
198 +== 1.8 WiFi Direction ==
199 +
200 +
201 +DLOS8N use directional WiFi Antenna. The best direction is as below:
202 +
203 +[[image:1652412859663-161.png||height="341" width="333"]]
204 +
205 +
195 195  = 2. Access and Configure DLOS8N =
196 196  
197 197  
... ... @@ -198,10 +198,8 @@
198 198  The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
199 199  
200 200  
201 -
202 202  == 2.1 Find IP address of DLOS8N ==
203 203  
204 -
205 205  === 2.1.1 Connect via WiFi ===
206 206  
207 207  
... ... @@ -210,7 +210,6 @@
210 210  
211 211  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
212 212  
213 -
214 214  [[image:1652413127647-377.png]]
215 215  
216 216  
... ... @@ -219,7 +219,6 @@
219 219  (((
220 220  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)**10.130.1.1**
221 221  
222 -
223 223  
224 224  )))
225 225  
... ... @@ -234,7 +234,6 @@
234 234  Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
235 235  )))
236 236  
237 -
238 238  
239 239  )))
240 240  
... ... @@ -247,16 +247,14 @@
247 247  If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
248 248  
249 249  
250 -
251 251  === 2.1.4 Connect via Ethernet with fall back ip ===
252 252  
253 253  
254 254  (((
255 -The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
260 +The WAN port also has a [[fall back ip address>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
256 256  )))
257 257  
258 258  
259 -
260 260  == 2.2 Access Configure Web UI ==
261 261  
262 262  
... ... @@ -283,10 +283,8 @@
283 283  [[image:1652414287022-223.png]]
284 284  
285 285  
286 -
287 287  = 3. Typical Network Setup =
288 288  
289 -
290 290  == 3.1 Overview ==
291 291  
292 292  
... ... @@ -302,14 +302,11 @@
302 302  
303 303  (((
304 304  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
305 -
306 -
307 307  )))
308 308  
309 309  [[image:image-20220916112129-1.png||height="414" width="887"]]
310 310  
311 311  
312 -
313 313  == 3.3 Access the Internet as a WiFi Client ==
314 314  
315 315  
... ... @@ -320,18 +320,14 @@
320 320  (((
321 321  (((
322 322  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
323 -
324 -
325 325  )))
326 326  )))
327 327  
328 328  [[image:image-20220916142159-25.png||height="406" width="877"]](% style="display:none" %)
329 329  
330 -
331 331  (((
332 332  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
333 333  
334 -
335 335  
336 336  )))
337 337  
... ... @@ -367,8 +367,6 @@
367 367  
368 368  (((
369 369  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
370 -
371 -
372 372  )))
373 373  
374 374  (((
... ... @@ -380,7 +380,6 @@
380 380  (% style="color:red" %)**Note** ***: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.**
381 381  
382 382  
383 -
384 384  == 3.5 Check Internet connection ==
385 385  
386 386  
... ... @@ -393,14 +393,11 @@
393 393  [[image:image-20220916112620-2.png||height="384" width="872"]](% style="display:none" %)
394 394  
395 395  
396 -
397 397  = 4. Example: Configure as a LoRaWAN gateway =
398 398  
399 399  
400 400  (((
401 401  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
402 -
403 -
404 404  )))
405 405  
406 406  (((
... ... @@ -412,14 +412,11 @@
412 412  TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
413 413  
414 414  
415 -
416 416  == 4.1 Create a gateway in TTN V3 Server ==
417 417  
418 418  
419 419  (((
420 420  (% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
421 -
422 -
423 423  )))
424 424  
425 425  (((
... ... @@ -435,17 +435,14 @@
435 435  The example gateway id is: (% style="color:green" %)**a840411e96744154**
436 436  
437 437  
438 -
439 439  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
440 440  
441 441  
442 442  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
443 443  
444 -
445 445  [[image:1652422127479-258.png||height="346" width="738"]]
446 446  
447 447  
448 -
449 449  (% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
450 450  
451 451  
... ... @@ -487,11 +487,9 @@
487 487  
488 488  After creating the gateway, you can see the gateway info, as below.
489 489  
490 -
491 491  [[image:1657089571089-281.png]]
492 492  
493 493  
494 -
495 495  == 4.2 Configure DLOS8N to connect to TTN v3 ==
496 496  
497 497  
... ... @@ -505,8 +505,6 @@
505 505  
506 506  (((
507 507  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
508 -
509 -
510 510  )))
511 511  
512 512  [[image:1657089586062-302.png]]
... ... @@ -525,7 +525,6 @@
525 525  [[image:1657089753667-298.png]]
526 526  
527 527  
528 -
529 529  == 4.3 Configure frequency ==
530 530  
531 531  
... ... @@ -533,7 +533,6 @@
533 533  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
534 534  )))
535 535  
536 -
537 537  [[image:1652422737399-529.png||height="362" width="737"]]
538 538  
539 539  
... ... @@ -542,7 +542,6 @@
542 542   [[image:1652422763536-750.png||height="514" width="730"]]
543 543  
544 544  
545 -
546 546  == 4.4 Add a LoRaWAN End Device ==
547 547  
548 548  
... ... @@ -650,22 +650,18 @@
650 650  [[image:1657089884131-489.png]]
651 651  
652 652  
653 -
654 654  = 5. Web Configure Pages =
655 655  
656 -
657 657  == 5.1 Home ==
658 658  
659 659  
660 660  Shows the system running status.
661 661  
662 -
663 663  [[image:image-20220916113702-4.png||height="331" width="727"]]
664 664  
665 665  
666 666  == 5.2 LoRa Settings ==
667 667  
668 -
669 669  === 5.2.1 LoRa ~-~-> LoRa ===
670 670  
671 671  
... ... @@ -684,17 +684,13 @@
684 684  
685 685  
686 686  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**
687 -
688 -
689 689  )))
690 690  
691 691  [[image:image-20220916114014-5.png||height="429" width="930"]]
692 692  
693 -
694 694  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
695 695  
696 696  
697 -
698 698  === 5.2.2 LoRa ~-~-> ABP Decryption ===
699 699  
700 700  
... ... @@ -707,26 +707,21 @@
707 707  
708 708  (((
709 709  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
710 -
711 -
712 712  )))
713 713  
714 714  [[image:image-20220916114346-7.png||height="363" width="886"]]
715 715  
716 716  
683 +== (% data-sider-select-id="e4f0e724-e454-4aa9-adc3-2d2fb381a93c" %)5.3 LoRaWAN Settings(%%) ==
717 717  
718 -== 5.3 LoRaWAN Settings ==
685 +=== (% data-sider-select-id="46832cd3-1415-4286-a897-1fbda6ed3a2a" %)5.3.1 LoRaWAN ~-~-> Semtech UDP(%%) ===
719 719  
720 720  
721 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
722 -
723 -
724 724  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
725 725  
690 +[[image:image-20240517101310-1.png||height="656" width="879"]]
726 726  
727 -[[image:image-20220916114929-8.png||height="716" width="871"]]
728 728  
729 -
730 730  (% style="color:red" %)**Note:**
731 731  
732 732  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
... ... @@ -736,17 +736,20 @@
736 736  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
737 737  
738 738  
702 +=== 5.3.2 LoRaWAN ~-~-> Basic Station ===
739 739  
740 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
741 741  
705 +[[image:image-20230415172432-1.png||height="461" width="868"]]
742 742  
743 -[[image:1657089933044-221.png]]
707 +Introduction for the use of LoRaWAN Basic for different servers:
744 744  
745 -
746 746  (((
747 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
710 +* Introduction to using with [[AWS-IoT LoRaWAN Core>>url:http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]].
711 +* Introduction to using with [[TTN>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.GatewayRegistrationforBasicsStation]].
712 +* Introduction to using with [[ChirpStack>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.GatewayRegistrationforBasicsStation]].
713 +* Introduction to using with [[Senet>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.SemtechBasicStation]].
714 +* Introduction to using with [[Actility Thingpark Enterprise>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Actility%20ThingPark%20Enterprise/]].
748 748  
749 -
750 750  
751 751  )))
752 752  
... ... @@ -759,122 +759,137 @@
759 759  
760 760  (((
761 761  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
762 -
763 -
764 764  )))
765 765  
766 766  [[image:image-20220916115143-9.png||height="314" width="858"]]
767 767  
768 768  
733 +== (% data-sider-select-id="30ceca0a-d0e8-4382-ac5a-59bebcb19c51" %)5.4 MQTT Settings(%%) ==
769 769  
770 -== 5.4 MQTT Settings ==
771 771  
772 -
773 773  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
774 774  
775 775  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
776 776  
777 -
778 778  [[image:1657090037148-906.png]]
779 779  
780 780  
743 +== 5.5  Network ==
781 781  
782 -== 5.5 System ==
745 +=== 5.5.1  Network ~-~-> Network Status ===
783 783  
784 784  
785 -=== 5.5.1 System ~-~-> System Overview ===
748 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
786 786  
787 787  
788 -Shows the system info:
751 +(% data-sider-select-id="5ec9b41d-26fb-4b6f-8f48-4c2f2c564c53" %)
752 +=== 5.5.2  Network ~-~-> Network ===
789 789  
790 790  
791 -[[image:image-20220916133758-10.png||height="611" width="865"]]
755 +(((
756 +(% data-sider-select-id="80d07254-c65e-47a2-86b6-8e6220924c25" %)
757 +(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
758 +)))
792 792  
760 +(((
761 +(% data-sider-select-id="d9954e50-7f68-4249-b699-61f53219fb57" %)
762 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for DLOS8N WAN port
763 +)))
793 793  
765 +(((
766 +(% data-sider-select-id="c87bbc6b-c98a-416d-a0a1-03f1ed827688" %)
767 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
768 +)))
794 794  
795 -=== 5.5.2 System ~-~-> General ( login settings) ===
770 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
796 796  
797 797  
798 -[[image:image-20220916134411-11.png||height="505" width="875"]]
773 +=== 5.5.3  Network ~-~-> WiFi ===
799 799  
800 800  
801 -(((
802 -(% style="color:#037691" %)**__System Password:__**
803 -)))
776 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
777 +DLOS8N WiFi Settings.
804 804  
805 -(((
806 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
807 -)))
779 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
780 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
808 808  
809 -(((
810 -This page can be used to set the password for them.
811 -)))
812 812  
813 -(((
814 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
815 -)))
783 +=== 5.5.4  Network ~-~-> Cellular ===
816 816  
817 -(((
818 -(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
819 819  
786 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
820 820  
821 -
822 -)))
788 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
789 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
823 823  
824 -=== 5.5.3 System ~-~-> Network ===
791 +(% data-sider-select-id="9cc42c8b-0049-4b4b-b053-5aa0175dcdb7" %)
792 +(% data-sider-select-id="1470493c-3c33-42a0-89eb-132d9554b028" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
825 825  
826 826  
827 -[[image:image-20220916134642-12.png||height="417" width="886"]]
795 +== (% data-sider-select-id="b34f40d0-e802-4e45-8a8c-6620e692699e" %)5.6 System(%%) ==
828 828  
797 +=== (% data-sider-select-id="0d466e95-c71d-43c8-9e78-cc547eea894f" %)5.6.1 System ~-~-> System Overview(%%) ===
829 829  
830 -(((
831 -(% style="color:#037691" %)**__LAN Settings:   __**(%%)When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
832 -)))
833 833  
834 -(((
835 -(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for DLOS8N WAN port
836 -)))
800 +Shows the system info:
837 837  
838 -(((
839 -(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for DLOS8N WiFi IP when use it as WiFi Client
802 +[[image:image-20220916133758-10.png||height="611" width="865"]]
840 840  
841 841  
842 -
843 -)))
805 +=== (% data-sider-select-id="dfb74220-f4d5-45ee-89d6-758b065fd447" %)5.6.2 System ~-~-> General ( login settings)(%%) ===
844 844  
845 -=== 5.5.4 System ~-~-> WiFi ===
846 846  
808 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png"]]
847 847  
848 -DLOS8N WiFi Settings.
810 +(((
811 +
849 849  
813 +(% data-sider-select-id="be43359c-6dc0-4f21-a3e8-95fb8b9622d4" %)
814 +There are two login for DLOS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
815 +)))
850 850  
851 -[[image:image-20220916134831-13.png||height="426" width="909"]](% style="display:none" %)
817 +(((
818 +This page can be used to set the password for them.
819 +)))
852 852  
821 +(((
822 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
823 +)))
853 853  
825 +(((
826 +(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
827 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
854 854  
855 -=== 5.5.5 System ~-~-> Cellular ===
829 +(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
830 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
856 856  
832 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
857 857  
858 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
834 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
859 859  
836 +(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
837 +(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
860 860  
861 -[[image:image-20220916135100-14.png||height="364" width="917"]]
862 862  
840 +=== 5.6.3 System ~-~-> Backup/Restore Config ===
863 863  
864 -(% style="color:red" %)**Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
865 865  
843 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
866 866  
867 867  
868 -=== 5.5.6 System ~-~-> Network Status ===
846 +=== 5.6.4 System ~-~-> Remote.it ===
869 869  
870 870  
871 -[[image:image-20220916135207-15.png||height="630" width="926"]]
849 +In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
872 872  
851 +the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
873 873  
853 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
874 874  
875 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
876 876  
856 +=== (% data-sider-select-id="730a4b6f-6adf-4db6-bccf-f911bfed1354" %)5.6.5 System ~-~-> Remote Mgnt & Auto Provision(%%) ===
877 877  
858 +
878 878  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
879 879  
880 880  
... ... @@ -897,10 +897,9 @@
897 897  [[image:image-20220916140017-16.png||height="619" width="911"]]
898 898  
899 899  
881 +=== (% data-sider-select-id="a2b72367-c22f-4274-9fe5-109ef8008b8e" %)5.6.6 System ~-~-> Firmware Upgrade(%%) ===
900 900  
901 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
902 902  
903 -
904 904  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
905 905  
906 906  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -943,62 +943,169 @@
943 943  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
944 944  
945 945  
926 +=== (% data-sider-select-id="07bc9f06-7099-42c0-964c-149f601f3627" %)5.6.7 System ~-~-> Reboot/Reset(%%) ===
946 946  
947 -=== 5.5.9 System ~-~-> Reboot/Reset ===
948 948  
949 -
950 950  [[image:image-20220916140312-18.png||height="286" width="909"]]
951 951  
952 952  (((
953 953  
954 -
955 -
956 956  )))
957 957  
958 -=== 5.5.10 System ~-~-> Package Maintain ===
935 +=== (% data-sider-select-id="2ceda713-1253-4788-9e11-0dd9d81977b3" %)5.6.8 System ~-~-> Package Maintain(%%) ===
959 959  
960 960  
961 961  [[image:image-20220916140421-19.png||height="715" width="904"]]
962 962  
963 -
964 964  Place to show what package has installed and possible to upgrade packages.
965 965  
966 966  
943 +== (% data-sider-select-id="79337028-35c7-4229-a401-04b91f009ce3" %)5.7 LogRead(%%) ==
967 967  
968 -== 5.6 LogRead ==
945 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
969 969  
947 +(% style="display:none" %) (%%)
970 970  
971 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
949 +(% data-sider-select-id="b7ed19c4-acf7-4583-9e50-5cd99c4cdeae" %)
950 +Show the frequency for LoRa Radio:
972 972  
973 -(% style="display:none" %) (%%)
952 +[[image:image-20220916140549-20.png||height="729" width="877"]]
974 974  
975 -Show the frequency for LoRa Radio and traffics.
976 976  
977 977  
978 -[[image:image-20220916140549-20.png||height="729" width="877"]]
956 +=== (% data-sider-select-id="adf0bc99-d699-4f2b-bf95-4f1c90b31e26" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
979 979  
980 980  
959 +(% data-sider-select-id="e9787126-554a-4bb4-8f31-ab2ce0e55165" %)
960 +Show the gateway traffic:
981 981  
982 -=== 5.6.2 LogRead ~-~-> System Log ===
962 +[[image:image-20240416112159-1.png||height="610" width="872"]]
983 983  
964 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.3 LogRead ~-~-> System Log(%%) ===
984 984  
966 +
985 985  Show the system log
986 986  
987 -
988 988  [[image:image-20220916140732-21.png||height="710" width="872"]]
989 989  
990 990  
972 +=== (% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %)5.7.4 LogRead ~-~-> (%%)Record Log(% data-sider-select-id="36bcc849-3536-481e-9d15-e3cc66832ecd" %) (%%) ===
991 991  
974 +
975 +This interface can record gateway logs:
976 +
977 +[[image:image-20240416112510-2.png||height="296" width="870"]]
978 +
992 992  = 6. More features =
993 993  
981 +== 6.1 Packet Filtering ==
994 994  
995 -== 6.1 More instructions ==
996 996  
984 +Drop unwanted packets.
997 997  
998 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
986 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
999 999  
1000 1000  
989 +== 6.2 Remote Access ==
1001 1001  
991 +
992 +Remote Access Devices for management.
993 +
994 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
995 +
996 +
997 +== 6.3 How to decode ABP LoRaWAN node ==
998 +
999 +
1000 +Decode ABP:
1001 +
1002 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
1003 +
1004 +
1005 +== 6.4 How to set data to MQTT broker ==
1006 +
1007 +
1008 +Only support ABP LoRaWAN End Node
1009 +
1010 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1011 +
1012 +
1013 +== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1014 +
1015 +
1016 +If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
1017 +
1018 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
1019 +
1020 +Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
1021 +
1022 +
1023 +If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
1024 +
1025 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
1026 +
1027 +Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
1028 +
1029 +
1030 +(% style="color:red" %)**NOTE***(%%): Different chirpstack versions use different gateway-bridge configurations.
1031 +
1032 +After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1033 +
1034 +
1035 +== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1036 +
1037 +
1038 +USB card reader plugged into the USB port of the gateway.
1039 +
1040 +Access the gateway Linux Command Line.
1041 +
1042 +
1043 +Check the USB device
1044 +
1045 +[[image:image-20230425165308-2.png]]
1046 +
1047 +
1048 +**Mount the USB device**
1049 +
1050 +(% class="box infomessage" %)
1051 +(((
1052 +mount /dev/sda1 /mnt/
1053 +)))
1054 +
1055 +[[image:image-20230425174131-4.png]]
1056 +
1057 +
1058 +
1059 +**Set up the automatic mount on boot**
1060 +
1061 +
1062 +(% class="box infomessage" %)
1063 +(((
1064 +**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1065 +)))
1066 +
1067 +[[image:image-20230425173831-3.png||height="105" width="833"]]
1068 +
1069 +
1070 +== 6.7  How to view DLOS8N GPS information ==
1071 +
1072 +
1073 +By default, when the DLOS8N GPS positioning is complete, it will be displayed in the state package on the **LogRead ~-~-> System Log**  interface.
1074 +
1075 +[[image:image-20230508134051-1.png||height="696" width="922"]]
1076 +
1077 +
1078 +When the gateway is registered with the TTN server, the GPS information is also displayed in the TTN log.
1079 +
1080 +[[image:image-20230508134603-2.png||height="435" width="927"]]
1081 +
1082 +
1083 +== 6.8  More instructions ==
1084 +
1085 +
1086 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1087 +
1088 +
1002 1002  = 7. Linux System =
1003 1003  
1004 1004  
... ... @@ -1005,19 +1005,18 @@
1005 1005  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1006 1006  
1007 1007  
1008 -
1009 1009  == 7.1 SSH Access for Linux console ==
1010 1010  
1011 1011  
1012 1012  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1013 1013  
1014 -IP address:  IP address of DLOS8N
1100 +**IP address:  ** IP address of DLOS8N
1015 1015  
1016 -Port:  22 (via WiFi AP mode) or 2222 (via WAN Interface)
1102 +**Port:  ** 22 (via WiFi AP mode) or 2222 (via WAN Interface)
1017 1017  
1018 -User Name:      (% style="color:green" %)**root**
1104 +**User Name: ** (% style="color:green" %)**root**
1019 1019  
1020 -Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1106 +**Password:**         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1021 1021  
1022 1022  After logging in, you will be in the Linux console and can enter commands as shown below.
1023 1023  
... ... @@ -1029,7 +1029,6 @@
1029 1029  [[image:1657090508015-884.png]]
1030 1030  
1031 1031  
1032 -
1033 1033  == 7.2 Edit and Transfer files ==
1034 1034  
1035 1035  
... ... @@ -1054,7 +1054,6 @@
1054 1054  [[image:1652431650755-450.png]]
1055 1055  
1056 1056  
1057 -
1058 1058  == 7.3 File System ==
1059 1059  
1060 1060  
... ... @@ -1071,7 +1071,6 @@
1071 1071  )))
1072 1072  
1073 1073  
1074 -
1075 1075  == 7.4 Package maintenance system ==
1076 1076  
1077 1077  
... ... @@ -1092,7 +1092,7 @@
1092 1092  )))
1093 1093  
1094 1094  (((
1095 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1178 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/ shows the available packages
1096 1096  )))
1097 1097  
1098 1098  (((
... ... @@ -1129,11 +1129,10 @@
1129 1129  (((
1130 1130  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1131 1131  
1132 -
1133 1133  
1134 1134  )))
1135 1135  
1136 -= 8.  Upgrade Linux Firmware =
1218 += 8. Upgrade Linux Firmware =
1137 1137  
1138 1138  
1139 1139  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -1140,7 +1140,7 @@
1140 1140  
1141 1141  * **Latest firmware**: [[LoRa Gateway Firmware>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/DLOS8/Firmware/Release/]],
1142 1142  
1143 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/DLSO8N/Firmware>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/DLOS8/Firmware/]])
1225 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/DLSO8N/Firmware>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/DLOS8/Firmware/Release/]])
1144 1144  
1145 1145  * **Change Log**: [[Firmware Change Log>>http://www.dragino.com/downloads/downloads/LoRa_Gateway/DLSO8/Firmware/ChangeLog]].
1146 1146  
... ... @@ -1152,10 +1152,9 @@
1152 1152  )))
1153 1153  
1154 1154  
1237 +== 8.1 Upgrade via Web UI ==
1155 1155  
1156 -== 8.1 Upgrade via Web UI ==
1157 1157  
1158 -
1159 1159  (((
1160 1160  Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
1161 1161  )))
... ... @@ -1179,10 +1179,9 @@
1179 1179  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657158986600-386.png?rev=1.1||alt="1657158986600-386.png"]]
1180 1180  
1181 1181  
1263 +== 8.2 Upgrade via Linux console ==
1182 1182  
1183 -== 8.2 Upgrade via Linux console ==
1184 1184  
1185 -
1186 1186  (((
1187 1187  SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
1188 1188  )))
... ... @@ -1197,13 +1197,17 @@
1197 1197  )))
1198 1198  
1199 1199  
1280 += 9. OTA System Update =
1200 1200  
1201 -= 9. FAQ =
1202 1202  
1283 +DLOS8N supports system auto update via OTA, please see **[[this URL>>doc:OTA Update.WebHome]]** for the detail of this feature.
1203 1203  
1204 -== 9.1 How can I configure for a customized frequency band? ==
1205 1205  
1286 += 10. FAQ =
1206 1206  
1288 +== 10.1 How can I configure for a customized frequency band? ==
1289 +
1290 +
1207 1207  (((
1208 1208  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1209 1209  )))
... ... @@ -1210,11 +1210,9 @@
1210 1210  
1211 1211  (((
1212 1212  
1213 -
1214 -
1215 1215  )))
1216 1216  
1217 -== 9.2 Can I connect DLOS8N to LORIOT? ==
1299 +== 10.2 Can I connect DLOS8N to LORIOT? ==
1218 1218  
1219 1219  
1220 1220  (((
... ... @@ -1222,10 +1222,9 @@
1222 1222  )))
1223 1223  
1224 1224  
1307 +== 10.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1225 1225  
1226 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1227 1227  
1228 -
1229 1229  (((
1230 1230  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1231 1231  )))
... ... @@ -1235,20 +1235,17 @@
1235 1235  )))
1236 1236  
1237 1237  
1319 +== 10.4 Can I use 868Mhz version for 915Mhz bands? ==
1238 1238  
1239 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1240 1240  
1241 -
1242 1242  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1243 1243  
1244 1244  
1325 += 11. Trouble Shooting =
1245 1245  
1246 -= 10. Trouble Shooting =
1327 +== 11.1 I get kernel error when install new package, how to fix? ==
1247 1247  
1248 1248  
1249 -== 10.1 I get kernel error when install new package, how to fix? ==
1250 -
1251 -
1252 1252  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1253 1253  
1254 1254  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1270,10 +1270,9 @@
1270 1270  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1271 1271  
1272 1272  
1351 +== 11.2 How to recover the DLOS8N if the firmware crashes ==
1273 1273  
1274 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
1275 1275  
1276 -
1277 1277  (((
1278 1278  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1279 1279  )))
... ... @@ -1280,11 +1280,9 @@
1280 1280  
1281 1281  (((
1282 1282  
1283 -
1284 -
1285 1285  )))
1286 1286  
1287 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1362 +== 11.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1288 1288  
1289 1289  
1290 1290  [[image:1657090540821-317.png]]
... ... @@ -1317,8 +1317,6 @@
1317 1317  
1318 1318  
1319 1319  As below photo:
1320 -
1321 -
1322 1322  )))
1323 1323  
1324 1324  [[image:1652435256286-879.png]]
... ... @@ -1330,31 +1330,40 @@
1330 1330  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1331 1331  
1332 1332  
1406 +(% data-sider-select-id="f9e9779e-261d-4a53-9ba6-a4d1c45cec19" %)
1407 +== 11.4  Why does the gateway reboot every 15 minutes without Internet? ==
1333 1333  
1334 -= 11. Order Info =
1409 +(% data-sider-select-id="77a3f493-29a0-4e57-a8ac-cd19e74d463d" %)
1410 +Check whether Internet Detect is enabled on the (% data-sider-select-id="98a5126a-698d-4dc1-af3b-b62ed09b2db0" %)**System~-~->General**(%%) interface.
1335 1335  
1412 +Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1336 1336  
1337 - **//PART: (% style="color:blue" %)DLOS8N-XXX-YYY//(%%)**
1414 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1338 1338  
1339 -(% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1340 1340  
1417 += 12. Order Info =
1418 +
1419 +
1420 + **PART: (% style="color:blue" %)DLOS8N-XXX-YYY(%%)**
1421 +
1422 +(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1423 +
1341 1341  * (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1342 1342  * (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1343 1343  
1344 -(% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1427 +(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1345 1345  
1346 -* (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1347 -* (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1348 -* (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1349 -* (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1429 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1430 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1431 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1432 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1350 1350  
1351 1351  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1352 1352  
1353 1353  
1437 += 13. Packing Info =
1354 1354  
1355 -= 12. Packing Info =
1356 1356  
1357 -
1358 1358  (((
1359 1359  **Package Includes**:
1360 1360  )))
... ... @@ -1375,7 +1375,7 @@
1375 1375  (% style="display:none" %) (%%)
1376 1376  
1377 1377  
1378 -= 13. Support =
1460 += 14. Support =
1379 1379  
1380 1380  
1381 1381  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
... ... @@ -1384,3 +1384,4 @@
1384 1384  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:  [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1385 1385  
1386 1386  
1469 +)))
image-20230415172432-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +85.4 KB
Content
image-20230425165215-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20230425165308-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +32.5 KB
Content
image-20230425173831-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +7.3 KB
Content
image-20230425174131-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +8.4 KB
Content
image-20230508134051-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +66.2 KB
Content
image-20230508134603-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
image-20240416112159-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +161.4 KB
Content
image-20240416112510-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.3 KB
Content
image-20240517101310-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0