Last modified by Kilight Cao on 2024/09/21 09:44
<
From version < 117.1 >
edited by Xiaoling
on 2022/07/06 14:45
To version < 71.4 >
edited by Xiaoling
on 2022/05/13 16:59
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DLOS8N - Outdoor LoRaWAN Gateway User Manual
1 +DLOS8N
Content
... ... @@ -1,74 +1,48 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:1652409757234-446.png||height="399" width="399"]]
4 +[[image:1652409757234-446.png]]
3 3  
4 4  
5 5  
8 +**DLOS8N Outdoor LoRaWAN Gateway User Manual**
6 6  
7 7  
11 +Table of Contents
8 8  
9 -
10 -
11 -
12 -
13 -**Table of Contents：**
14 -
15 15  {{toc/}}
16 16  
17 17  
18 18  
19 19  
20 -
21 -
22 -
23 -
24 -
25 -
26 -
27 -
28 28  = 1. Introduction =
29 29  
30 30  == 1.1 What is the DLOS8N ==
31 31  
22 +The DLOS8N is an open source outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
32 32  
33 -(((
34 -The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
35 -)))
24 +DLOS8N supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol. DLOS8N includes a SX1302(% class="mark" %) (%%)LoRaWAN concentrator.
36 36  
37 -(((
38 -DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
39 -)))
26 +DLOS8N has pre-configured standard LoRaWAN frequency bands to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
40 40  
41 -(((
42 -DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
43 -)))
44 -
45 -(((
46 46  DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
47 -)))
48 48  
49 -(((
50 -DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
30 +DLOS8N supports auto-provision for mass deployment and long term maintain. System intergrator can easily change the settings.
51 51  
52 -
53 -)))
32 +[[image:1652411526195-923.png]]
54 54  
55 -[[image:1652411526195-923.png||height="494" width="731"]]
56 56  
57 -
58 58  == 1.2 Specifications ==
59 59  
37 +**Hardware System:**
60 60  
61 -(% style="color:#037691" %)**Hardware System:**
39 + Linux Part:
62 62  
63 -(((
64 -(% style="color:#037691" %)**Linux Part:**
65 -)))
66 -
67 67  * 400Mhz ar9331 processor
68 68  * 64MB RAM
69 69  * 16MB Flash
70 70  
71 -(% style="color:#037691" %)**Interface:**
45 +**Interface:**
72 72  
73 73  * 10M/100M RJ45 Ports x 1
74 74  * WiFi : 802.11 b/g/n
... ... @@ -79,7 +79,7 @@
79 79  * Mini-PCI E connector x 1
80 80  * SX1302 + 2 x SX1250
81 81  
82 -(% style="color:#037691" %)**WiFi Spec:**
56 +**WiFi Spec:**
83 83  
84 84  * IEEE 802.11 b/g/n
85 85  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -92,7 +92,7 @@
92 92  ** 11g 54M : -71dbm
93 93  ** 11n 20M : -67dbm
94 94  
95 -(% style="color:#037691" %)**LoRa Spec:**
69 +**LoRa Spec:**
96 96  
97 97  * Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
98 98  * 70 dB CW interferer rejection at 1 MHz offset
... ... @@ -103,7 +103,7 @@
103 103  * Dynamic data-rate (DDR) adaptation
104 104  * True antenna diversity or simultaneous dual-band operation
105 105  
106 -(% style="color:#037691" %)**Cellular 4G LTE (optional):**
80 +**Cellular 4G LTE (optional):**
107 107  
108 108  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
109 109  * Standard Size SIM Slot
... ... @@ -112,7 +112,7 @@
112 112  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
113 113  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
114 114  
115 -(% style="color:#037691" %)**Power over Ethernet:**
89 +**Power over Ethernet:**
116 116  
117 117  * IEEE 802.3af compliant.
118 118  * Support wide input voltage range  37Vdc to 57Vdc.
... ... @@ -143,7 +143,7 @@
143 143  
144 144  == 1.4 Hardware System Structure ==
145 145  
146 -[[image:1652411641871-482.png||height="416" width="716"]]
120 +[[image:1652411641871-482.png||height="425" width="732"]]
147 147  
148 148  
149 149  == 1.5 DLOS8N Applications ==
... ... @@ -169,13 +169,11 @@
169 169  (% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
170 170  )))
171 171  * (((
172 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn't have Internet connection.
173 -
174 -
175 -
146 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
176 176  )))
177 177  )))
178 178  
150 +
179 179  == 1.7 WiFi Direction ==
180 180  
181 181  DLOS8N use directional WiFi Antenna. The best direction is as below:
... ... @@ -187,7 +187,6 @@
187 187  
188 188  The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
189 189  
190 -
191 191  == 2.1 Find IP address of DLOS8N ==
192 192  
193 193  === 2.1.1 Connect via WiFi ===
... ... @@ -194,6 +194,7 @@
194 194  
195 195  [[image:1652412985720-934.png]]
196 196  
168 +
197 197  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
198 198  
199 199  [[image:1652413127647-377.png]]
... ... @@ -200,11 +200,8 @@
200 200  
201 201  (% style="background-color:#ffffcc" %)dragino+dragino
202 202  
203 -(((
204 204  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
205 205  
206 -
207 -)))
208 208  
209 209  === 2.1.2 Connect via Ethernet with DHCP IP from router ===
210 210  
... ... @@ -211,11 +211,8 @@
211 211  [[image:1652414114583-532.png]]
212 212  
213 213  
214 -(((
215 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
183 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
216 216  
217 -
218 -)))
219 219  
220 220  === 2.1.3 Connect via WiFi with DHCP IP from router ===
221 221  
... ... @@ -227,7 +227,7 @@
227 227  
228 228  === 2.1.4 Connect via Ethernet with fall back ip ===
229 229  
230 -The WAN port also has a [[fall back ip address>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3IconfiguredDLOS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
196 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
231 231  
232 232  
233 233  == 2.2 Access Configure Web UI ==
... ... @@ -254,6 +254,8 @@
254 254  [[image:1652414287022-223.png]]
255 255  
256 256  
223 +
224 +
257 257  = 3. Typical Network Setup =
258 258  
259 259  == 3.1 Overview ==
... ... @@ -265,12 +265,11 @@
265 265  * **WiFi AP Mode**
266 266  * **Cellular Mode**
267 267  
268 -
269 269  == 3.2 Use WAN port to access Internet ==
270 270  
271 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N's WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
238 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
272 272  
273 -[[image:1657089235431-309.png]]
240 +[[image:1652420169255-959.png]]
274 274  
275 275  
276 276  == 3.3 Access the Internet as a WiFi Client ==
... ... @@ -277,44 +277,33 @@
277 277  
278 278  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
279 279  
280 -(((
281 281  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
282 -)))
283 283  
284 -[[image:1657089014716-109.png]]
249 +[[image:1652420327792-211.png]]
285 285  
286 -(((
251 +
287 287  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
288 288  
289 -
290 -)))
291 291  
292 292  == 3.4 Access the Internet via Cellular ==
293 293  
294 294  If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
295 295  
296 -(((
259 +
297 297  First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
298 -)))
299 299  
300 300  [[image:1652420606018-181.png]]
301 301  
302 302  
303 -(((
304 -[[image:1652420718132-929.png||height="427" width="727"]]
305 -)))
265 +[[image:1652420718132-929.png||height="450" width="766"]]
306 306  
307 -(((
267 +
308 308  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
309 -)))
310 310  
311 -(((
270 +
312 312  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
313 -)))
314 314  
315 -(((
316 316  [[image:1652421032117-341.png||height="329" width="752"]]
317 -)))
318 318  
319 319  (% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
320 320  
... ... @@ -323,11 +323,11 @@
323 323  
324 324  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
325 325  
326 -* GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
327 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
328 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
282 +* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
283 +* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
284 +* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
329 329  
330 -[[image:1657089302970-101.png]]
286 +[[image:1652421351382-793.png||height="339" width="765"]]
331 331  
332 332  
333 333  = 4. Example: Configure as a LoRaWAN gateway =
... ... @@ -334,13 +334,11 @@
334 334  
335 335  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
336 336  
337 -(((
338 338  [[image:image-20220513140429-1.png||height="565" width="824"]]
339 -)))
340 340  
341 341  This chapter describes how to use the DLOS8Nto work with
342 342  
343 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
297 +[[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
344 344  
345 345  
346 346  == 4.1 Create a gateway in TTN V3 Server ==
... ... @@ -347,16 +347,13 @@
347 347  
348 348  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
349 349  
350 -(((
351 351  Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
352 -)))
353 353  
354 -(((
355 355  [[image:1652421929753-168.png||height="403" width="739"]]
356 -)))
357 357  
358 -The example gateway id is: **a840411e96744154**
308 +The example gateway id is: a840411e96744154
359 359  
310 +
360 360  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
361 361  
362 362  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -363,12 +363,12 @@
363 363  
364 364  [[image:1652422127479-258.png||height="346" width="738"]]
365 365  
317 +
366 366  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
367 367  
368 -(((
369 369  [[image:1652422142236-792.png||height="356" width="737"]]
370 -)))
371 371  
322 +
372 372  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
373 373  
374 374  * Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
... ... @@ -384,48 +384,36 @@
384 384  
385 385  Open the following page:
386 386  
387 - [[image:1657089352139-443.png]]
338 + [[image:1652422470352-518.png||height="391" width="716"]]
388 388  
340 +[[image:1652422479876-297.png||height="398" width="729"]]
389 389  
390 -[[image:1657089363403-611.png]]
391 -
392 -
393 -(((
394 394  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
395 -)))
396 396  
397 397  After creating the gateway, you can see the gateway info, as below.
398 398  
399 -[[image:1657089571089-281.png]]
346 +[[image:1652422509034-682.png||height="299" width="739"]]
400 400  
401 401  
402 402  == 4.2 Configure DLOS8N to connect to TTN v3 ==
403 403  
404 -(((
405 405  You can now configure the DLOS8N to let it connect to TTN network V3.
406 -)))
407 407  
408 -(((
409 409  Make sure your DLOS8N has a working Internet Connection first.
410 -)))
411 411  
412 -(((
413 413  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
414 -)))
415 415  
416 -[[image:1657089586062-302.png]]
357 +[[image:1652422624783-580.png||height="327" width="729"]]
417 417  
418 -
419 419  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
420 420  
421 421  In the home page, we can see the LoRaWAN connection is ready now.
422 422  
423 -[[image:1657089615405-484.png]]
363 +[[image:1652422685063-596.png||height="327" width="729"]]
424 424  
425 -
426 426  In TTN v3 portal, we can also see the gateway is connected.
427 427  
428 -[[image:1657089753667-298.png]]
367 +[[image:1652422703020-955.png||height="343" width="730"]]
429 429  
430 430  
431 431  == 4.3 Configure frequency ==
... ... @@ -440,96 +440,62 @@
440 440   [[image:1652422763536-750.png||height="514" width="730"]]
441 441  
442 442  
443 -== 4.4 Add a LoRaWAN End Device ==
382 +4.4 Add a LoRaWAN End Device
444 444  
445 -(((
446 446  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
447 -)))
448 448  
449 -(((
450 450  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
451 -)))
452 452  
453 453  [[image:1652422794767-871.png]]
454 454  
455 -(((
456 456  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
457 -)))
458 458  
459 -(((
460 460  Three codes are required to define the device in TTN v3:
461 -)))
462 462  
463 463  * DEV EUI - Unique ID code for a particular device.
464 464  * APP EUI - ID code for an Application defined in TTN v3.
465 465  * APP Key - Unique key to secure communications with a particular device.
466 466  
467 -(((
468 -
469 -
470 470  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
471 -)))
472 472  
473 473  [[image:1652422840936-838.png]]
474 474  
475 -(((
402 +
476 476  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
477 -)))
478 478  
479 -(((
480 480  For the TTN v3 server, you can use the codes set in the device as in the following example.
481 -)))
482 482  
483 -(((
484 484  Select **Add Application** to open the screen below.
485 -)))
486 486  
409 +[[image:1652422946999-255.png||height="356" width="744"]]
487 487  
488 -[[image:1657089795213-689.png]]
489 -
490 490  Open the **Application **select** Add end device**
491 491  
492 -
493 493  Start Register the end device
494 494  
495 -[[image:1657089816539-483.png]]
415 +[[image:1652422975885-591.png||height="359" width="726"]]
496 496  
497 -(((
498 498  Select OTAA activation mode
499 499  
500 -
501 -)))
502 502  
503 -(((
504 504  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
505 -)))
506 506  
507 -[[image:1657089833529-558.png]]
422 +[[image:1652422998005-968.png||height="352" width="744"]]
508 508  
509 -
510 510  First, input the End device ID, AppEUI and DevEUI.
511 511  
512 -[[image:1657089845985-297.png]]
426 +[[image:1652423022781-339.png||height="365" width="741"]]
513 513  
514 -
515 515  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
516 516  
517 -[[image:1657089868506-654.png]]
430 +[[image:1652423046741-467.png||height="355" width="736"]]
518 518  
519 -
520 -(((
521 521  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
522 522  
523 -
524 -)))
525 525  
526 -(((
527 527  (% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
528 -)))
529 529  
530 -(((
531 531  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
532 -)))
533 533  
534 534  [[image:1652423277549-324.png||height="273" width="745"]]
535 535  
... ... @@ -547,36 +547,30 @@
547 547  
548 548  === 5.2.1 LoRa ~-~-> LoRa ===
549 549  
550 -(((
551 551  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
552 -)))
553 553  
554 -(((
555 555  Different DLOS8N hardware version can support different frequency range:
556 -)))
557 557  
558 558  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
559 559  * **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
560 560  
561 -(((
562 562  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
563 -)))
564 564  
565 565  [[image:1652423554776-574.png||height="380" width="740"]]
566 566  
567 -Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
466 +Note *: See this instruction for how to customize frequency band:
568 568  
468 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
569 569  
470 +
570 570  === 5.2.2 LoRa ~-~-> ABP Decryption ===
571 571  
572 572  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
573 573  
574 574  * No internet connection.
575 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
476 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
576 576  
577 -(((
578 -Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
579 -)))
478 +Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
580 580  
581 581  [[image:1652423628833-467.png||height="357" width="755"]]
582 582  
... ... @@ -595,7 +595,7 @@
595 595  
596 596  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
597 597  
598 -**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
497 +See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
599 599  
600 600  
601 601  === 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
... ... @@ -602,22 +602,14 @@
602 602  
603 603  [[image:1652428499323-384.png||height="275" width="723"]]
604 604  
504 +Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
605 605  
606 -(((
607 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
608 608  
609 -
610 -)))
611 -
612 612  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
613 613  
614 -(((
615 615  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
616 -)))
617 617  
618 -(((
619 -Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
620 -)))
511 +Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
621 621  
622 622  [[image:1652428648903-878.png||height="266" width="731"]]
623 623  
... ... @@ -626,8 +626,9 @@
626 626  
627 627  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
628 628  
629 -Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
520 +Instruction:
630 630  
522 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
631 631  
632 632  [[image:1652428705046-212.png||height="417" width="733"]]
633 633  
... ... @@ -645,46 +645,54 @@
645 645  
646 646  [[image:1652428861256-300.png||height="354" width="724"]]
647 647  
648 -(((
649 649  **__System Password:__**
650 -)))
651 651  
652 -(((
653 653  There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
654 -)))
655 655  
656 -(((
657 657  This page can be used to set the password for them.
658 -)))
659 659  
660 660  (((
661 -**__Timezone: __**Set device timezone.
547 +
662 662  )))
663 663  
664 -(((
665 -**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
550 +**__Timezone:__**
666 666  
552 +Set device timezone.
553 +
554 +(((
667 667  
668 668  )))
669 669  
558 +**__Port forwarding:__**
559 +
560 +Enable/Disable the HTTP and SSH access via WAN interface.
561 +
562 +
670 670  === 5.5.3 System ~-~-> Network ===
671 671  
672 672  [[image:1652429149053-824.png||height="467" width="725"]]
673 673  
674 -(((
675 -**__LAN Settings:  __**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N's own network.
676 -)))
567 +**__LAN Settings:__**
677 677  
569 +When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
570 +
678 678  (((
679 -__**WAN Settings: **__Setting for DLOS8N WAN port
572 +
680 680  )))
681 681  
682 -(((
683 -__**WiFi Settings:  **__Setting for DLOS8N WiFi IP when use it as WiFi Client
575 +__**WAN Settings:**__
684 684  
577 +Setting for DLOS8N WAN port
578 +
579 +(((
685 685  
686 686  )))
687 687  
583 +__**WiFi Settings:**__
584 +
585 +Setting for DLOS8N WiFi IP when use it as WiFi Client
586 +
587 +
688 688  === 5.5.4 System ~-~-> WiFi ===
689 689  
690 690  DLOS8N WiFi Settings.
... ... @@ -698,7 +698,7 @@
698 698  
699 699  [[image:1652429309615-825.png||height="320" width="732"]]
700 700  
701 -(% style="color:red" %)Note *: For DLOS8N which doesn't have the cellular module, this page will shows Cellular not detected.
601 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
702 702  
703 703  
704 704  === 5.5.6 System ~-~-> Network Status ===
... ... @@ -718,13 +718,13 @@
718 718  
719 719  Please see this document for detail:
720 720  
721 -(((
722 722  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
723 -)))
724 724  
725 725  
726 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
624 +R-SSH is for remote access device and management, introduction for how to use:
727 727  
626 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
627 +
728 728  [[image:1652429624400-864.png||height="432" width="716"]]
729 729  
730 730  
... ... @@ -736,25 +736,20 @@
736 736  
737 737  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
738 738  
739 -
740 740  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
741 741  
742 742  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
743 743  
744 744  
745 -(((
746 746  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
747 -)))
748 748  
749 -(((
750 750  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
751 -)))
752 752  
753 753  [[image:1652429711145-862.png||height="270" width="737"]]
754 754  
650 +
755 755  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
756 756  
757 -
758 758  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
759 759  
760 760  The system will automatically boot into the new firmware after upgrade.
... ... @@ -761,6 +761,7 @@
761 761  
762 762  [[image:1652429962190-224.png||height="358" width="729"]]
763 763  
659 +
764 764  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
765 765  
766 766  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -774,9 +774,6 @@
774 774  
775 775  [[image:1652430197132-330.png||height="256" width="724"]]
776 776  
777 -(((
778 -
779 -)))
780 780  
781 781  === 5.5.10 System ~-~-> Package Maintain ===
782 782  
... ... @@ -789,24 +789,11 @@
789 789  
790 790  === 5.6.1 LogRead ~-~-> LoRa Log ===
791 791  
685 +[[image:1652430356784-567.png||height="325" width="730"]]
792 792  
793 793  Show the frequency for LoRa Radio and traffics.
794 794  
795 -[[image:image-20220615204306-1.png||height="575" width="733"]]
796 796  
797 -
798 -Show the IoT Server Connection State and FWD State
799 -
800 -[[image:image-20220616083933-1.png||height="556" width="729"]]
801 -
802 -DLOS8 can view GPS location in the Logread FWD State
803 -
804 -
805 -Show the Error logs, RxTxJson lorawan packages, and PULL State
806 -
807 -[[image:image-20220615205416-6.png||height="442" width="884"]]
808 -
809 -
810 810  === 5.6.2 LogRead ~-~-> System Log ===
811 811  
812 812  Show the system log
... ... @@ -818,7 +818,7 @@
818 818  
819 819  == 6.1 More instructions ==
820 820  
821 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
701 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
822 822  
823 823  
824 824  = 7. Linux System =
... ... @@ -825,7 +825,6 @@
825 825  
826 826  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
827 827  
828 -
829 829  == 7.1 SSH Access for Linux console ==
830 830  
831 831  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
... ... @@ -847,23 +847,16 @@
847 847  [[image:1652431609193-637.png||height="214" width="732"]]
848 848  
849 849  
729 +
850 850  == 7.2 Edit and Transfer files ==
851 851  
852 -(((
853 853  The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
854 -)))
855 855  
856 -(((
857 857  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
858 -)))
859 859  
860 -(((
861 861  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
862 -)))
863 863  
864 -(((
865 865  Screenshot is as below:
866 -)))
867 867  
868 868  [[image:1652431650755-450.png]]
869 869  
... ... @@ -870,223 +870,181 @@
870 870  
871 871  == 7.3 File System ==
872 872  
873 -(((
874 874  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
875 -)))
876 876  
877 -(((
878 878  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
879 -)))
880 880  
881 -(((
882 882  You can use an external USB flash memory device to extend the size of flash memory for storage.
883 -)))
884 884  
885 -
886 886  == 7.4 Package maintenance system ==
887 887  
888 888  DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
889 889  
890 -(((
755 +
891 891  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
892 -)))
893 893  
894 -(((
895 -**In Linux Console run:**
896 -)))
897 897  
898 -(((
899 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
900 -)))
759 +In Linux Console run:
901 901  
902 -(((
903 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
904 -)))
761 +**root@dragino-169d30:~~# opkg update**  ~/~/ to get the latest packages list
905 905  
906 -(((
907 -(% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
908 -)))
763 +**root@dragino-169d30:~~# opkg list**         ~/~/shows the available packages
909 909  
765 +**root@dragino-169d30:~~# opkg install iperf **~/~/ install iperf
766 +
910 910  The system will automatically install the required packages as shown below.
911 911  
912 912  
913 -(((
914 -(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
915 -)))
770 +//root@dragino-169d30:/etc/opkg# opkg install iperf//
916 916  
917 -(((
918 -(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
919 -)))
772 +//Installing iperf (2.0.12-1) to root…//
920 920  
921 -(((
922 -(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
923 -)))
774 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
924 924  
925 -(((
926 -(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
927 -)))
776 +//Installing uclibcxx (0.2.4-3) to root…//
928 928  
929 -(((
930 -(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
931 -)))
778 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
932 932  
933 -(((
934 -(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
935 -)))
780 +//Configuring uclibcxx.//
936 936  
937 -(((
938 -(% style="background-color:#dcdcdc" %)//Configuring iperf.//
782 +//Configuring iperf.//
939 939  
940 -
941 -)))
942 942  
943 -= 8. Upgrade Linux Firmware =
785 +1. Upgrade Linux Firmware
944 944  
787 +1. FAQ
788 +11. How can I configure for a customized frequency band?
945 945  
946 -= 9. FAQ =
790 +See below link for how to customize frequency band:
947 947  
948 -== 9.1 How can I configure for a customized frequency band? ==
792 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
949 949  
950 -(((
951 -See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
952 -)))
953 953  
954 -(((
955 -
956 -)))
795 +1.
796 +11. Can I connect DLOS8N to LORIOT?
957 957  
958 -== 9.2 Can I connect DLOS8N to LORIOT? ==
798 +Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
959 959  
960 -Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
961 961  
801 +1.
802 +11. Can I make my own firmware for the gateway, where can I find the source code?
962 962  
963 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
964 -
965 -(((
966 966  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
967 -)))
968 968  
969 -(((
970 970  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
971 -)))
972 972  
973 973  
974 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
809 +1.
810 +11. Can I use 868Mhz version for 915Mhz bands?
975 975  
976 976  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
977 977  
978 978  
979 -= 10. Trouble Shooting =
980 980  
981 -== 10.1 I get kernel error when install new package, how to fix? ==
982 982  
817 +1. Trouble Shooting
818 +11. I get kernel error when install new package, how to fix?
819 +
983 983  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
984 984  
985 -(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
986 986  
987 -(% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
823 +root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
988 988  
989 -(% style="background-color:yellow" %)Collected errors:
825 +Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
990 990  
991 -(% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
827 +Collected errors:
992 992  
993 -(% style="background-color:yellow" %)*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
829 +~* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
994 994  
995 - (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
831 +*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
996 996  
997 -(((
833 + ~* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
834 +
835 +
998 998  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
999 -)))
1000 1000  
1001 -(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
838 +Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1002 1002  
1003 1003  
1004 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
841 +1.
842 +11. How to recover the DLOS8N if the firmware crashes
1005 1005  
1006 -(((
1007 -Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1008 -)))
844 +Please follow this instruction to recover your gateway:
1009 1009  
1010 -(((
1011 -
1012 -)))
846 +[[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
1013 1013  
1014 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1015 1015  
1016 -[[image:1652435238615-272.png||height="247" width="727"]]
1017 1017  
1018 -(((
850 +
851 +
852 +1.
853 +11. I configured DLOS8N for WiFi access and lost its IP. What to do now?
854 +
855 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image067.png]]
856 +
1019 1019  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1020 -)))
1021 1021  
1022 -(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
859 +(Note: fallback IP can be disabled in the WAN and DHCP page)
1023 1023  
1024 1024  
1025 -(((
1026 1026  Steps to connect via fall back IP:
1027 -)))
1028 1028  
1029 -(((
1030 -~1. Connect PC's Ethernet port to DLOS8N's WAN port
1031 -)))
864 +1. Connect PC’s Ethernet port to DLOS8N’s WAN port
865 +1. Configure PC’s Ethernet port has
866 +IP: 172.31.255.253 and
867 +Netmask: 255.255.255.252
1032 1032  
1033 -(((
1034 -2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1035 -)))
1036 -
1037 -(((
1038 1038  As below photo:
1039 -)))
1040 1040  
1041 -[[image:1652435256286-879.png]]
871 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
1042 1042  
1043 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
873 +1. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1044 1044  
1045 1045  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1046 1046  
1047 1047  
1048 -= 11. Order Info =
1049 1049  
1050 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
879 +1. Order Info
1051 1051  
1052 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
881 +**//PART: DLOS8N-XXX-YYY//:**
1053 1053  
1054 -* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1055 -* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
883 +**//XXX: Frequency Band//**
1056 1056  
1057 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
885 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
886 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1058 1058  
1059 -* (% style="color:red" %)** E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1060 -* (% style="color:red" %)** A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1061 -* (% style="color:red" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1062 -* (% style="color:red" %)** J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
888 +**//YYY: 4G Cellular Option//**
1063 1063  
890 +* **E**: EMEA, Korea, Thailand, India.
891 +* **A**: North America/ Rogers/AT&T/T-Mobile.
892 +* **AU**: Latin America, New Zeland, Taiwan
893 +* **J**: Japan, DOCOMO/SoftBank/ KDDI
894 +
1064 1064  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1065 1065  
1066 1066  
1067 1067  
1068 -= 12. Packing Info =
1069 1069  
1070 -(((
900 +1. Packing Info
901 +
1071 1071  **Package Includes**:
1072 -)))
1073 1073  
1074 1074  * DLOS8N LoRaWAN Gateway x 1
1075 1075  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1076 1076  * Packaging with environmental protection paper box
1077 1077  
1078 -(((
1079 1079  **Dimension and weight**:
1080 -)))
1081 1081  
1082 -* Device Size: 26 x 9 x 8.5 cm
1083 -* Weight: 450g
1084 -* Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1085 -* Weight: 2.5kg
910 +* Device Size: 12 x 12 x 3 cm
911 +* Weight: 187g
912 +* Package Size: 14.5 x 13.5 x 6 cm
913 +* Weight: 300g
1086 1086  
1087 -= 13. Support =
915 +1. Support
1088 1088  
1089 -* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
917 +* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1090 1090  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1091 1091  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1092 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
920 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:
921 +
922 +[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652435238615-272.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -68.7 KB
Content
1652435256286-879.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -111.5 KB
Content
1652436675869-206.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
1652436705761-420.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1652436787176-950.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
1657088939210-913.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657089014716-109.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657089235431-309.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -166.8 KB
Content
1657089302970-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -172.5 KB
Content
1657089352139-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.9 KB
Content
1657089363403-611.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -65.2 KB
Content
1657089397232-102.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657089571089-281.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657089586062-302.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657089615405-484.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -169.5 KB
Content
1657089753667-298.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657089795213-689.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657089816539-483.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657089833529-558.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657089845985-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1657089868506-654.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1657089884131-489.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
1657089933044-221.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.5 KB
Content
1657089950542-323.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -53.1 KB
Content
image-20220513184125-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -139.3 KB
Content
image-20220615204306-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
image-20220615204341-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
image-20220615204725-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -112.8 KB
Content
image-20220615204938-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -95.9 KB
Content
image-20220615205338-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20220615205416-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -134.4 KB
Content
image-20220616083933-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0