Version 73.1 by kai on 2024/10/22 11:55
Show last authors
1 (% class="wikigeneratedid" %)
2 **Table of Contents:**
3
4 {{toc/}}
5
6
7
8
9 = 1. LoRaST v4 base Hardware =
10
11
12 Below hardware use LoRaST v4 module. They supports UART Access for AT Command and Firmware Upgrade.
13
14
15 {{velocity}}
16 $xwiki.ssfx.use("js/xwiki/table/table.css")
17 $xwiki.jsfx.use("js/xwiki/table/tablefilterNsort.js", true)
18 {{/velocity}}
19
20 (% border="1" cellspacing="5" class="doOddEven filterable grid sortable" id="tableid" style="background-color:#f2f2f2; width:869px" %)
21 (% class="sortHeader" %)|=(% style="width: 269px; background-color: rgb(217, 226, 243);" %)[[Models(% class="wikiinternallink sortarrow wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 158px; background-color: rgb(217, 226, 243);" %)[[Mother Board(% class="wikiinternallink sortarrow wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 214px; background-color: rgb(217, 226, 243);" %)[[UART for AT Commands(% class="wikiinternallink sortarrow wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 226px; background-color: rgb(217, 226, 243);" %)[[UART for Upgrade Firmware(% class="wikiinternallink sortarrow wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]
22 (% class="even" %)|(% style="width:269px" %)PS-LB, PS-LB-NA, SDI12-LB|(% style="width:158px" %)SIB|(% style="width:214px" %)[[Instruction>>||anchor="H2.2UARTConnectionforSIBmotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H3.UARTforFirmwareUpgrade"]]
23 (% class="odd" %)|(% style="width:269px" %)(((
24 SN50v3, S31-LB, S31B-LB,D20-LB.D20S-LB, D21-LB, D22-LB , SW3L-LB
25 )))|(% style="width:158px" %)SN50v3|(% style="width:214px" %)[[Instruction>>||anchor="H2.3UARTConnectionforSN50v3basemotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H3.UARTforFirmwareUpgrade"]]
26 (% class="even" %)|(% style="width:269px" %)LHT65N|(% style="width:158px" %)LHT65N|(% style="width:214px" %) |(% style="width:226px" %)
27 (% class="odd" %)|(% style="width:269px" %)(((
28 RS485-LB, SE01-LB, SPH01-LB,
29
30 LMS01-LB, LDS12-LB, LDS40-LB,
31
32 DDS75-LB, DDS45-LB, DDS04-LB,
33
34 DDS20-LB, MDS120-LB, MDS200-LB, WSC2-LB, LDS25-LB
35 )))|(% style="width:158px" %)RS485-BL|(% style="width:214px" %)[[Instruction>>||anchor="H2.4UARTConnectionforRS485-BLbasemotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H3.UARTforFirmwareUpgrade"]]
36
37 = 2. UART for AT Commands =
38
39 == 2.1 General software set up for AT Commands via UART ==
40
41
42 ~1. Use a general serial tool.
43
44 2. Connect PC to device's UART interface
45
46 3. Set up serial tool with : BaudRate: 9600, databit:8, No parity, No flow control.
47
48 (((
49 4. The password is the last six characters of APPSKEY or PIN of box
50
51
52 **Example：**
53
54 APPSKEY= 41 85 71 A7 5D 7E 54 52 25 58 74 85 96 14 74 85
55
56 The password：147485
57
58 [[image:image-20230329162900-1.png||height="302" width="648"]]
59
60
61 )))
62
63 [[image:image-20221224170218-1.png||height="497" width="640"]]
64
65
66 == 2.2 UART Connection for SIB mother board ==
67
68
69 [[image:image-20221224171304-3.png||height="545" width="863"]]
70
71
72 == 2.3 UART Connection for SN50v3 base mother board ==
73
74
75 [[image:image-20230515102801-1.png||height="635" width="860"]]
76
77
78 == 2.4 UART Connection for RS485-BL base mother board ==
79
80
81 [[image:微信图片_20230809144604.jpg||height="673" width="791"]]
82
83
84 == 2.5 UART Connection for DS20L mother board ==
85
86
87 **UART Connection for DS20L mother board:**
88
89 [[image:image-20231212145142-1.jpeg||height="676" width="796"]]
90
91 **Interface definition:**
92
93 [[image:image-20231212144745-2.png||height="279" width="510"]]
94
95 **DS20L programming line:**
96
97 [[image:image-20231212150405-2.jpeg||height="297" width="669"]]
98
99
100 == 2.6 UART Connection for AQS01-L mother board ==
101
102 [[image:image-20240115110027-1.jpeg||height="749" width="953"]]
103
104
105 == 2.7  UART Connection for LWL04 mother board ==
106
107
108 [[image:image-20240910163111-1.jpeg||height="560" width="727"]]
109
110
111 = 3. UART for Firmware Upgrade =
112
113 == 3.1 Check Your device already have bootloader ==
114
115 === 3.1.1 What is Dragino Bootloader? ===
116
117
118 Dragino Bootloader is a customizer made bootloader which support below features:
119
120 * OTA Update via LoRa
121 * OTA Batch update configure via LoRa
122
123 All Dragino End Devices base on LoRa ST v4 supports Dragino Bootloader.
124
125
126 === 3.1.2 How can i know if my device already have bootloader? ===
127
128
129 If a device has a bootloader. it will output bootloader info to UART when boot. As below:
130
131 [[image:image-20230514150410-1.png||height="398" width="815"]]
132
133
134 === 3.1.3 How to upload bootloader to device? ===
135
136
137 If your is LoRa ST v4 base hardware and doesn't have bootloader. You can upload a bootloader to it.
138
139 **[[Downlink Link for OTA bootloader>>https://www.dropbox.com/sh/g4cp2lm85ovr8hu/AADX-4aEE-7SuKQAKTWrgKHIa?dl=0]].**
140
141
142 (% style="color:blue" %)**Update a firmware via TremoProgrammer:**
143
144 LoRaSTv4 Base hardware support UART update firmware. the UART connection is the same as AT Command connection, with the need for two extra action. See below for the steps:
145
146 (% style="color:blue" %)**Step1**(%%): Set BOOT Switch to (% style="color:blue" %)**PROG**(%%) mode. PROG mode is for update firmware specially.
147
148 (% style="color:blue" %)**Step2**(%%): Press (% style="color:blue" %)**Reset**(%%) button, the module will then boot into program mode.
149
150 (% style="color:blue" %)**Step3**(%%): Use (% style="color:blue" %)**TremoProgrammer**(%%) to update the firmware to LoRaST v4.
151
152 (% style="color:blue" %)**Step4**(%%): Set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) position. Press Reset button again and module will run the new software.
153
154
155 Below is the method for how to update via (% style="color:blue" %)**TremoProgrammer:**
156
157 1.  **TremoProgrammer** download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
158
159 2.  Run** (% style="color:blue" %)TremoProgrammer.(%%)**
160
161 3.  Choose software and set the address to (% style="color:blue" %)**0x08000000**(%%).
162
163 4. Rember to set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) after update finish. And you should be about to see Bootloader info in output after update
164
165 [[image:image-20230515171651-1.png]]
166
167
168 == 3.2 Update Firmware (Assume the device already have a bootloader) ==
169
170
171 Video Instruction: **[[https:~~/~~/youtu.be/G_xEZnNjJmM >>https://youtu.be/G_xEZnNjJmM]]**
172
173
174 === 3.2.1 Update a firmware via Dragino Sensor Manager Utility.exe ===
175
176
177 ~1. Download **[[OTA Tool>>https://www.dropbox.com/scl/fo/9kqeqf6wmet10o9hgxuwa/h?rlkey=4ikrg6kg5v0yjxwhp0i37wrv7&dl=0]]**
178
179 2. Set the switch to Flash
180
181 3. Use below schedule to update:
182
183 [[image:image-20230526105151-1.png]]
184
185 [[image:image-20230526105910-2.png]]
186
187 [[image:image-20230520100541-5.png||height="535" width="799"]]
188
189
190 = 4. FAQ =
191
192 == 4.1 How to recover if upgrade wrong file to bootloader? ==
193
194
195 You can just upload the bootloader again.
196
197
198 == 4.2 How to recover if upgrade wrong firmware via Dragino Sensor Manager Utility.exe? ==
199
200
201 The UART upgrade via Dragino Sensor Manager Utility.exe is base on Dragino Bootloader. So if you are able to upgrade some file via this tool. It means the device has bootloder.
202
203
204 The upgrade via Dragino Sensor Manager Utility is base on firmware level and won't effect the bootloader. If you upgrade a wrong firmware file, you can try below:
205
206 ~1. UART upgrade via Dragino Sensor Manager Utility again to the correct version. The password should use the AT PIN for the wrong firmware.  (This method is not 100% work, depends which wrong firmware you have upgraded)
207
208 2. Use **TremoProgrammer **to update firmware. [[Insturction>>||anchor="H4.3HowtouseTremoProgrammertoupdatefirmwareifthereisbootloaderinthedevice3F"]]
209
210 3. Use **[[OTA update>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**, this is base on Bootloader so it will work. Make you choose the correct frequency band (base on the firmware version in the sensor or use EU868 which is the default setting.)
211
212
213 == 4.3 How to use TremoProgrammer to update firmware if there is bootloader in the device? ==
214
215
216 Make sure your device already bootloader while use this update. Otherwise device won't be able to boot ( can be solve by upload a bootloader to the device).
217
218 LoRaSTv4 Base hardware support UART update firmware. the UART connection is the same as AT Command connection, with the need for two extra action. See below for the steps:
219
220 (% style="color:blue" %)**Step1**(%%): Set BOOT Switch to (% style="color:blue" %)**PROG**(%%) mode. PROG mode is for update firmware specially.
221
222 (% style="color:blue" %) **Step2**(%%): Press (% style="color:blue" %)**Reset**(%%) button, the module will then boot into program mode.
223
224 (% style="color:blue" %)**Step3**(%%): Use (% style="color:blue" %)**TremoProgrammer**(%%) to update the firmware to LoRaST v4.
225
226 (% style="color:blue" %)**Step4**(%%): Set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) position. Press Reset button again and module will run the new software.
227
228
229 Below is the method for how to update via (% style="color:blue" %)**TremoProgrammer:**
230
231 1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
232
233 2.  Run(% style="color:blue" %)** TremoProgrammer.**
234
235 3.  Choose software and set the address to (% style="color:blue" %)**0x0800D000**. (% style="color:red" %)**VERY IMPORTANT for this address**.
236
237 4. Rember to set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) after update
238
239 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/WebHome/image-20221224174341-4.png?width=374&height=471&rev=1.1||alt="image-20221224174341-4.png" height="471" width="374"]]
240
241
242 == 4.4 How to troubleshoot incorrect password ==
243
244
245 ~1. Please use lowercase letters.
246 2. You need to add line breaks when entering commands.
247 3. Upgrade the firmware to  display password firmware
248
249 Upgrade steps:
250
251 **~ [[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**
252 Firmware location:
253
254 **~ [[NB-IoT - Dropbox>>url:https://www.dropbox.com/sh/u0uzvvnn58yrie4/AACREHllkTe0rATD4ZOqddyga/NB-IoT?dl=0&preview=SET_NB_PWD.hex&subfolder_nav_tracking=1]]**
255
256 After updating the firmware, run the firmware.
257 Press the restart button and the password will be printed in the serial port output.
258 Save the password and re-upgrade the firmware to the original firmware.
259
260 (% style="color:red" %)**Note: When upgrading to the original firmware, you need to add the Bootloader firmware**.
261
262 Bootloader Firmware location(Please use V1.3):
263
264 [[Bootloader - Dropbox>>url:https://www.dropbox.com/sh/u0uzvvnn58yrie4/AADUXfZ5jye4I5l1JH8HEALUa/LoRaWAN%20End%20Node/Bootloader/LoRa_Bootloader?dl=0&subfolder_nav_tracking=1]]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0