Skip to Content
Version 54.4 by Xiaoling on 2023/10/08 11:44
Hide last authors
Xiaoling 26.16 1 (% class="wikigeneratedid" %)
Edwin Chen 14.1 2 **Table of Contents:**
3
4 {{toc/}}
5
6
7
8
Edwin Chen 15.1 9 = 1. LoRaST v4 base Hardware =
Edwin Chen 1.1 10
Xiaoling 15.2 11
Edwin Chen 29.1 12 Below hardware use LoRaST v4 module. They supports UART Access for AT Command and Firmware Upgrade.
Edwin Chen 1.1 13
Xiaoling 47.8 14
Xiaoling 26.22 15 {{velocity}}
16 $xwiki.ssfx.use("js/xwiki/table/table.css")
17 $xwiki.jsfx.use("js/xwiki/table/tablefilterNsort.js", true)
18 {{/velocity}}
Xiaoling 26.13 19
Xiaoling 47.9 20 (% border="1" cellspacing="5" class="doOddEven filterable grid sortable" id="tableid" style="background-color:#f2f2f2; width:869px" %)
Xiaoling 54.4 21 (% class="sortHeader" %)|=(% style="width: 269px; background-color: rgb(217, 226, 243);" %)[[Models(% class="wikiinternallink sortarrow wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 158px; background-color: rgb(217, 226, 243);" %)[[Mother Board(% class="wikiinternallink sortarrow wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 214px; background-color: rgb(217, 226, 243);" %)[[UART for AT Commands(% class="wikiinternallink sortarrow wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 226px; background-color: rgb(217, 226, 243);" %)[[UART for Upgrade Firmware(% class="wikiinternallink sortarrow wikiinternallink" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]
Xiaoling 54.3 22 (% class="even" %)|(% style="width:269px" %)PS-LB, PS-LB-NA, SDI12-LB|(% style="width:158px" %)SIB|(% style="width:214px" %)[[Instruction>>||anchor="H2.2UARTConnectionforSIBmotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H3.UARTforFirmwareUpgrade"]]
Xiaoling 54.1 23 (% class="odd" %)|(% style="width:269px" %)(((
Edwin Chen 29.1 24 SN50v3, S31-LB, S31B-LB,
Xiaoling 26.13 25
Edwin Chen 29.1 26 D20-LB.D20S-LB, D21-LB, D22-LB
Xiaoling 54.3 27 )))|(% style="width:158px" %)SN50v3|(% style="width:214px" %)[[Instruction>>||anchor="H2.3UARTConnectionforSN50v3basemotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H3.UARTforFirmwareUpgrade"]]
Xiaoling 54.1 28 (% class="even" %)|(% style="width:269px" %)LHT65N|(% style="width:158px" %)LHT65N|(% style="width:214px" %) |(% style="width:226px" %)
29 (% class="odd" %)|(% style="width:269px" %)(((
30 RS485-LB, SE01-LB, SPH01-LB,
Xiaoling 26.24 31
Xiaoling 54.1 32 LMS01-LB,LDS12-LB,LDS40-LB,
33
34 DDS75-LB,DDS45-LB,DDS04-LB,
35
36 DDS20-LB,MDS120-LB,MDS200-LB, WSC2-LB
Xiaoling 54.3 37 )))|(% style="width:158px" %)RS485-BL|(% style="width:214px" %)[[Instruction>>||anchor="H2.4UARTConnectionforRS485-BLbasemotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H3.UARTforFirmwareUpgrade"]]
Xiaoling 54.1 38
Xiaoling 54.4 39
40
Edwin Chen 15.1 41 = 2. UART for AT Commands =
42
Edwin Chen 50.1 43 == 2.1 General software set up for AT Commands via UART ==
Edwin Chen 15.1 44
Xiaoling 15.2 45
Xiaoling 26.25 46 ~1. Use a general serial tool.
Edwin Chen 9.1 47
Xiaoling 26.25 48 2. Connect PC to device's UART interface
49
50 3. Set up serial tool with : BaudRate: 9600, databit:8, No parity, No flow control.
51
52 (((
53 4. The password is the last six characters of APPSKEY or PIN of box
54
Xiaoling 47.6 55
Xiaoling 20.2 56 **Example：**
Bei Jinggeng 16.1 57
58 APPSKEY= 41 85 71 A7 5D 7E 54 52 25 58 74 85 96 14 74 85
59
60 The password：147485
Bei Jinggeng 19.1 61
Bei Jinggeng 20.1 62 [[image:image-20230329162900-1.png||height="302" width="648"]]
Bei Jinggeng 19.1 63
64
Bei Jinggeng 16.1 65 )))
66
Edwin Chen 9.1 67 [[image:image-20221224170218-1.png||height="497" width="640"]]
68
69
Edwin Chen 15.1 70 == 2.2 UART Connection for SIB mother board ==
Edwin Chen 9.1 71
Xiaoling 15.3 72
Edwin Chen 9.1 73 [[image:image-20221224171304-3.png||height="545" width="863"]]
74
75
Edwin Chen 21.1 76 == 2.3 UART Connection for SN50v3 base mother board ==
77
Xiaoling 47.6 78
Xiaoling 54.1 79 [[image:image-20230515102801-1.png||height="635" width="860"]]
Edwin Chen 21.1 80
Xiaoling 26.24 81
Xiaoling 54.1 82 == 2.4 UART Connection for RS485-BL base mother board ==
83
84
85 [[image:微信图片_20230809144604.jpg||height="673" width="791"]]
86
87
Edwin Chen 15.1 88 = 3. UART for Firmware Upgrade =
Edwin Chen 9.1 89
Edwin Chen 28.1 90 == 3.1 Check Your device already have bootloader ==
Edwin Chen 13.1 91
Edwin Chen 28.1 92 === 3.1.1 What is Dragino Bootloader? ===
Edwin Chen 24.1 93
Xiaoling 26.24 94
Edwin Chen 24.1 95 Dragino Bootloader is a customizer made bootloader which support below features:
96
Edwin Chen 36.1 97 * OTA Update via LoRa
98 * OTA Batch update configure via LoRa
Edwin Chen 24.1 99
Edwin Chen 31.1 100 All Dragino End Devices base on LoRa ST v4 supports Dragino Bootloader.
Edwin Chen 24.1 101
102
Edwin Chen 28.1 103 === 3.1.2 How can i know if my device already have bootloader? ===
Xiaoling 26.26 104
Xiaoling 47.6 105
Edwin Chen 28.1 106 If a device has a bootloader. it will output bootloader info to UART when boot. As below:
Xiaoling 15.3 107
Edwin Chen 28.1 108 [[image:image-20230514150410-1.png||height="398" width="815"]]
Edwin Chen 22.1 109
Edwin Chen 23.1 110
Edwin Chen 28.1 111 === 3.1.3 How to upload bootloader to device? ===
Edwin Chen 23.1 112
Xiaoling 47.6 113
Edwin Chen 32.1 114 If your is LoRa ST v4 base hardware and doesn't have bootloader. You can upload a bootloader to it.
Edwin Chen 23.1 115
Edwin Chen 36.1 116 **[[Downlink Link for OTA bootloader>>https://www.dropbox.com/sh/g4cp2lm85ovr8hu/AADX-4aEE-7SuKQAKTWrgKHIa?dl=0]].**
Edwin Chen 23.1 117
Edwin Chen 36.1 118
Xiaoling 47.6 119 (% style="color:blue" %)**Update a firmware via TremoProgrammer:**
Edwin Chen 36.1 120
121 LoRaSTv4 Base hardware support UART update firmware. the UART connection is the same as AT Command connection, with the need for two extra action. See below for the steps:
122
123 (% style="color:blue" %)**Step1**(%%): Set BOOT Switch to (% style="color:blue" %)**PROG**(%%) mode. PROG mode is for update firmware specially.
124
125 (% style="color:blue" %)**Step2**(%%): Press (% style="color:blue" %)**Reset**(%%) button, the module will then boot into program mode.
126
127 (% style="color:blue" %)**Step3**(%%): Use (% style="color:blue" %)**TremoProgrammer**(%%) to update the firmware to LoRaST v4.
128
129 (% style="color:blue" %)**Step4**(%%): Set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) position. Press Reset button again and module will run the new software.
130
131
132 Below is the method for how to update via (% style="color:blue" %)**TremoProgrammer:**
133
134 1.  **TremoProgrammer** download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
135
136 2.  Run** (% style="color:blue" %)TremoProgrammer.(%%)**
137
138 3.  Choose software and set the address to (% style="color:blue" %)**0x08000000**(%%).
139
140 4. Rember to set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) after update finish. And you should be about to see Bootloader info in output after update
141
142 [[image:image-20230515171651-1.png]]
143
144
Edwin Chen 28.1 145 == 3.2 Update Firmware (Assume the device already have a bootloader) ==
146
Edwin Chen 48.1 147
148 Video Instruction: **[[https:~~/~~/youtu.be/G_xEZnNjJmM >>https://youtu.be/G_xEZnNjJmM]]**
149
150
Edwin Chen 42.1 151 === 3.2.1 Update a firmware via Dragino Sensor Manager Utility.exe ===
Edwin Chen 28.1 152
Xiaoling 47.6 153
Edwin Chen 42.1 154 ~1. Download **[[OTA Tool>>https://www.dropbox.com/sh/bqepfzvusv6ig8e/AACKB4J9pdY1I7s5kcKfCUGHa?dl=0]]**
Edwin Chen 28.1 155
Edwin Chen 42.1 156 2. Use below schedule to update:
Edwin Chen 28.1 157
Edwin Chen 47.1 158 [[image:image-20230526105151-1.png]]
Edwin Chen 28.1 159
Edwin Chen 47.1 160 [[image:image-20230526105910-2.png]]
Edwin Chen 28.1 161
Edwin Chen 42.1 162 [[image:image-20230520100541-5.png||height="535" width="799"]]
163
164
165 = 4. FAQ =
166
167 == 4.1 How to recover if upgrade wrong file to bootloader? ==
168
Xiaoling 47.6 169
Edwin Chen 42.1 170 You can just upload the bootloader again.
171
172
173 == 4.2 How to recover if upgrade wrong firmware via Dragino Sensor Manager Utility.exe? ==
174
Xiaoling 47.6 175
Edwin Chen 42.1 176 The UART upgrade via Dragino Sensor Manager Utility.exe is base on Dragino Bootloader. So if you are able to upgrade some file via this tool. It means the device has bootloder.
177
178
179 The upgrade via Dragino Sensor Manager Utility is base on firmware level and won't effect the bootloader. If you upgrade a wrong firmware file, you can try below:
180
181 ~1. UART upgrade via Dragino Sensor Manager Utility again to the correct version. The password should use the AT PIN for the wrong firmware.  (This method is not 100% work, depends which wrong firmware you have upgraded)
182
Edwin Chen 43.1 183 2. Use **TremoProgrammer **to update firmware. [[Insturction>>||anchor="H4.3HowtouseTremoProgrammertoupdatefirmwareifthereisbootloaderinthedevice3F"]]
Edwin Chen 42.1 184
185 3. Use **[[OTA update>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**, this is base on Bootloader so it will work. Make you choose the correct frequency band (base on the firmware version in the sensor or use EU868 which is the default setting.)
186
187
188 == 4.3 How to use TremoProgrammer to update firmware if there is bootloader in the device? ==
189
Xiaoling 47.6 190
Edwin Chen 42.1 191 Make sure your device already bootloader while use this update. Otherwise device won't be able to boot ( can be solve by upload a bootloader to the device).
192
Edwin Chen 13.1 193 LoRaSTv4 Base hardware support UART update firmware. the UART connection is the same as AT Command connection, with the need for two extra action. See below for the steps:
194
Xiaoling 47.6 195 (% style="color:blue" %)**Step1**(%%): Set BOOT Switch to (% style="color:blue" %)**PROG**(%%) mode. PROG mode is for update firmware specially.
Edwin Chen 13.1 196
Xiaoling 47.6 197 (% style="color:blue" %) **Step2**(%%): Press (% style="color:blue" %)**Reset**(%%) button, the module will then boot into program mode.
Edwin Chen 13.1 198
Xiaoling 47.6 199 (% style="color:blue" %)**Step3**(%%): Use (% style="color:blue" %)**TremoProgrammer**(%%) to update the firmware to LoRaST v4.
Edwin Chen 13.1 200
Xiaoling 47.6 201 (% style="color:blue" %)**Step4**(%%): Set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) position. Press Reset button again and module will run the new software.
Edwin Chen 13.1 202
203
Xiaoling 47.6 204 Below is the method for how to update via (% style="color:blue" %)**TremoProgrammer:**
205
Edwin Chen 13.1 206 1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
207
Xiaoling 47.6 208 2.  Run(% style="color:blue" %)** TremoProgrammer.**
Edwin Chen 13.1 209
Xiaoling 47.6 210 3.  Choose software and set the address to (% style="color:blue" %)**0x0800D000**. (% style="color:red" %)**VERY IMPORTANT for this address**.
Edwin Chen 13.1 211
Xiaoling 47.6 212 4. Rember to set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) after update
Edwin Chen 13.1 213
Edwin Chen 42.1 214 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/WebHome/image-20221224174341-4.png?width=374&height=471&rev=1.1||alt="image-20221224174341-4.png" height="471" width="374"]]
Xiaoling 47.6 215
216