Skip to Content
Version 52.2 by Xiaoling on 2023/10/08 11:00
Hide last authors
Xiaoling 26.16 1 (% class="wikigeneratedid" %)
Edwin Chen 14.1 2 **Table of Contents:**
3
4 {{toc/}}
5
6
7
8
Edwin Chen 15.1 9 = 1. LoRaST v4 base Hardware =
Edwin Chen 1.1 10
Xiaoling 15.2 11
Edwin Chen 29.1 12 Below hardware use LoRaST v4 module. They supports UART Access for AT Command and Firmware Upgrade.
Edwin Chen 1.1 13
Xiaoling 47.8 14
Xiaoling 26.22 15 {{velocity}}
16 $xwiki.ssfx.use("js/xwiki/table/table.css")
17 $xwiki.jsfx.use("js/xwiki/table/tablefilterNsort.js", true)
18 {{/velocity}}
Xiaoling 26.13 19
Xiaoling 47.9 20 (% border="1" cellspacing="5" class="doOddEven filterable grid sortable" id="tableid" style="background-color:#f2f2f2; width:869px" %)
Xiaoling 52.2 21 ||||
22 (% class="sortHeader" %)|=(% scope="col" style="width: 269px; background-color: rgb(217, 226, 243);" %)[[Models(% class="sortarrow" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 158px; background-color: rgb(217, 226, 243);" %)[[Mother Board(% class="sortarrow" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 214px; background-color: rgb(217, 226, 243);" %)[[UART for AT Commands(% class="sortarrow" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]|=(% style="width: 226px; background-color: rgb(217, 226, 243);" %)[[UART for Upgrade Firmware(% class="sortarrow" %)~[~[image:/xwiki/resources/js/xwiki/table/img/arrow-none.gif?cache-version=1648720710000~|~|alt="⇵" border="0"~]~]>>path:#||onclick="ts_resortTable(this);return false;" class="sortHeader"]]
23 (% class="even" %)|(% style="width:269px" %)PS-LB, PS-LB-NA, SDI12-LB|(% style="width:158px" %)SIB|(% style="width:214px" %)[[Instruction>>||anchor="H2.2UARTConnectionforSIBmotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H2.2UARTConnectionforSIBmotherboard"]]
24 (% class="odd" %)|(% style="width:269px" %)(((
Edwin Chen 29.1 25 SN50v3, S31-LB, S31B-LB,
Xiaoling 26.13 26
Edwin Chen 29.1 27 D20-LB.D20S-LB, D21-LB, D22-LB
Xiaoling 52.2 28 )))|(% style="width:158px" %)SN50v3|(% style="width:214px" %)[[Instruction>>||anchor="H2.3UARTConnectionforSN50v3basemotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H2.2UARTConnectionforSIBmotherboard"]]
29 (% class="even" %)|(% style="width:269px" %)LHT65N|(% style="width:158px" %)LHT65N|(% style="width:214px" %) |(% style="width:226px" %)
30 (% class="odd" %)|(% style="width:269px" %)(((
Ellie Zhang 52.1 31 RS485-LB, SE01-LB, SPH01-LB,
Xiaoling 26.24 32
Ellie Zhang 52.1 33 LMS01-LB,LDS12-LB,LDS40-LB,
34
35 DDS75-LB,DDS45-LB,DDS04-LB,
36
37 DDS20-LB,MDS120-LB,MDS200-LB, WSC2-LB
Xiaoling 52.2 38 )))|(% style="width:158px" %)RS485-BL|(% style="width:214px" %)[[Instruction>>||anchor="H2.4UARTConnectionforRS485-BLbasemotherboard"]]|(% style="width:226px" %)[[Instruction>>||anchor="H2.2UARTConnectionforSIBmotherboard"]]
Ellie Zhang 52.1 39
Edwin Chen 15.1 40 = 2. UART for AT Commands =
41
Edwin Chen 50.1 42 == 2.1 General software set up for AT Commands via UART ==
Edwin Chen 15.1 43
Xiaoling 15.2 44
Xiaoling 26.25 45 ~1. Use a general serial tool.
Edwin Chen 9.1 46
Xiaoling 26.25 47 2. Connect PC to device's UART interface
48
49 3. Set up serial tool with : BaudRate: 9600, databit:8, No parity, No flow control.
50
51 (((
52 4. The password is the last six characters of APPSKEY or PIN of box
53
Xiaoling 47.6 54
Xiaoling 20.2 55 **Example：**
Bei Jinggeng 16.1 56
57 APPSKEY= 41 85 71 A7 5D 7E 54 52 25 58 74 85 96 14 74 85
58
59 The password：147485
Bei Jinggeng 19.1 60
Bei Jinggeng 20.1 61 [[image:image-20230329162900-1.png||height="302" width="648"]]
Bei Jinggeng 19.1 62
63
Bei Jinggeng 16.1 64 )))
65
Edwin Chen 9.1 66 [[image:image-20221224170218-1.png||height="497" width="640"]]
67
68
Edwin Chen 15.1 69 == 2.2 UART Connection for SIB mother board ==
Edwin Chen 9.1 70
Xiaoling 15.3 71
Edwin Chen 9.1 72 [[image:image-20221224171304-3.png||height="545" width="863"]]
73
74
Edwin Chen 21.1 75 == 2.3 UART Connection for SN50v3 base mother board ==
76
Xiaoling 47.6 77
Ellie Zhang 52.1 78 [[image:image-20230515102801-1.png||height="635" width="860"]]
Edwin Chen 21.1 79
Xiaoling 26.24 80
Ellie Zhang 52.1 81 == 2.4 UART Connection for RS485-BL base mother board ==
82
83
84 [[image:微信图片_20230809144604.jpg||height="673" width="791"]]
85
86
Edwin Chen 15.1 87 = 3. UART for Firmware Upgrade =
Edwin Chen 9.1 88
Edwin Chen 28.1 89 == 3.1 Check Your device already have bootloader ==
Edwin Chen 13.1 90
Edwin Chen 28.1 91 === 3.1.1 What is Dragino Bootloader? ===
Edwin Chen 24.1 92
Xiaoling 26.24 93
Edwin Chen 24.1 94 Dragino Bootloader is a customizer made bootloader which support below features:
95
Edwin Chen 36.1 96 * OTA Update via LoRa
97 * OTA Batch update configure via LoRa
Edwin Chen 24.1 98
Edwin Chen 31.1 99 All Dragino End Devices base on LoRa ST v4 supports Dragino Bootloader.
Edwin Chen 24.1 100
101
Edwin Chen 28.1 102 === 3.1.2 How can i know if my device already have bootloader? ===
Xiaoling 26.26 103
Xiaoling 47.6 104
Edwin Chen 28.1 105 If a device has a bootloader. it will output bootloader info to UART when boot. As below:
Xiaoling 15.3 106
Edwin Chen 28.1 107 [[image:image-20230514150410-1.png||height="398" width="815"]]
Edwin Chen 22.1 108
Edwin Chen 23.1 109
Edwin Chen 28.1 110 === 3.1.3 How to upload bootloader to device? ===
Edwin Chen 23.1 111
Xiaoling 47.6 112
Edwin Chen 32.1 113 If your is LoRa ST v4 base hardware and doesn't have bootloader. You can upload a bootloader to it.
Edwin Chen 23.1 114
Edwin Chen 36.1 115 **[[Downlink Link for OTA bootloader>>https://www.dropbox.com/sh/g4cp2lm85ovr8hu/AADX-4aEE-7SuKQAKTWrgKHIa?dl=0]].**
Edwin Chen 23.1 116
Edwin Chen 36.1 117
Xiaoling 47.6 118 (% style="color:blue" %)**Update a firmware via TremoProgrammer:**
Edwin Chen 36.1 119
120 LoRaSTv4 Base hardware support UART update firmware. the UART connection is the same as AT Command connection, with the need for two extra action. See below for the steps:
121
122 (% style="color:blue" %)**Step1**(%%): Set BOOT Switch to (% style="color:blue" %)**PROG**(%%) mode. PROG mode is for update firmware specially.
123
124 (% style="color:blue" %)**Step2**(%%): Press (% style="color:blue" %)**Reset**(%%) button, the module will then boot into program mode.
125
126 (% style="color:blue" %)**Step3**(%%): Use (% style="color:blue" %)**TremoProgrammer**(%%) to update the firmware to LoRaST v4.
127
128 (% style="color:blue" %)**Step4**(%%): Set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) position. Press Reset button again and module will run the new software.
129
130
131 Below is the method for how to update via (% style="color:blue" %)**TremoProgrammer:**
132
133 1.  **TremoProgrammer** download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
134
135 2.  Run** (% style="color:blue" %)TremoProgrammer.(%%)**
136
137 3.  Choose software and set the address to (% style="color:blue" %)**0x08000000**(%%).
138
139 4. Rember to set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) after update finish. And you should be about to see Bootloader info in output after update
140
141 [[image:image-20230515171651-1.png]]
142
143
Edwin Chen 28.1 144 == 3.2 Update Firmware (Assume the device already have a bootloader) ==
145
Edwin Chen 48.1 146
147 Video Instruction: **[[https:~~/~~/youtu.be/G_xEZnNjJmM >>https://youtu.be/G_xEZnNjJmM]]**
148
149
Edwin Chen 42.1 150 === 3.2.1 Update a firmware via Dragino Sensor Manager Utility.exe ===
Edwin Chen 28.1 151
Xiaoling 47.6 152
Edwin Chen 42.1 153 ~1. Download **[[OTA Tool>>https://www.dropbox.com/sh/bqepfzvusv6ig8e/AACKB4J9pdY1I7s5kcKfCUGHa?dl=0]]**
Edwin Chen 28.1 154
Edwin Chen 42.1 155 2. Use below schedule to update:
Edwin Chen 28.1 156
Edwin Chen 47.1 157 [[image:image-20230526105151-1.png]]
Edwin Chen 28.1 158
Edwin Chen 47.1 159 [[image:image-20230526105910-2.png]]
Edwin Chen 28.1 160
Edwin Chen 42.1 161 [[image:image-20230520100541-5.png||height="535" width="799"]]
162
163
164 = 4. FAQ =
165
166 == 4.1 How to recover if upgrade wrong file to bootloader? ==
167
Xiaoling 47.6 168
Edwin Chen 42.1 169 You can just upload the bootloader again.
170
171
172 == 4.2 How to recover if upgrade wrong firmware via Dragino Sensor Manager Utility.exe? ==
173
Xiaoling 47.6 174
Edwin Chen 42.1 175 The UART upgrade via Dragino Sensor Manager Utility.exe is base on Dragino Bootloader. So if you are able to upgrade some file via this tool. It means the device has bootloder.
176
177
178 The upgrade via Dragino Sensor Manager Utility is base on firmware level and won't effect the bootloader. If you upgrade a wrong firmware file, you can try below:
179
180 ~1. UART upgrade via Dragino Sensor Manager Utility again to the correct version. The password should use the AT PIN for the wrong firmware.  (This method is not 100% work, depends which wrong firmware you have upgraded)
181
Edwin Chen 43.1 182 2. Use **TremoProgrammer **to update firmware. [[Insturction>>||anchor="H4.3HowtouseTremoProgrammertoupdatefirmwareifthereisbootloaderinthedevice3F"]]
Edwin Chen 42.1 183
184 3. Use **[[OTA update>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**, this is base on Bootloader so it will work. Make you choose the correct frequency band (base on the firmware version in the sensor or use EU868 which is the default setting.)
185
186
187 == 4.3 How to use TremoProgrammer to update firmware if there is bootloader in the device? ==
188
Xiaoling 47.6 189
Edwin Chen 42.1 190 Make sure your device already bootloader while use this update. Otherwise device won't be able to boot ( can be solve by upload a bootloader to the device).
191
Edwin Chen 13.1 192 LoRaSTv4 Base hardware support UART update firmware. the UART connection is the same as AT Command connection, with the need for two extra action. See below for the steps:
193
Xiaoling 47.6 194 (% style="color:blue" %)**Step1**(%%): Set BOOT Switch to (% style="color:blue" %)**PROG**(%%) mode. PROG mode is for update firmware specially.
Edwin Chen 13.1 195
Xiaoling 47.6 196 (% style="color:blue" %) **Step2**(%%): Press (% style="color:blue" %)**Reset**(%%) button, the module will then boot into program mode.
Edwin Chen 13.1 197
Xiaoling 47.6 198 (% style="color:blue" %)**Step3**(%%): Use (% style="color:blue" %)**TremoProgrammer**(%%) to update the firmware to LoRaST v4.
Edwin Chen 13.1 199
Xiaoling 47.6 200 (% style="color:blue" %)**Step4**(%%): Set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) position. Press Reset button again and module will run the new software.
Edwin Chen 13.1 201
202
Xiaoling 47.6 203 Below is the method for how to update via (% style="color:blue" %)**TremoProgrammer:**
204
Edwin Chen 13.1 205 1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
206
Xiaoling 47.6 207 2.  Run(% style="color:blue" %)** TremoProgrammer.**
Edwin Chen 13.1 208
Xiaoling 47.6 209 3.  Choose software and set the address to (% style="color:blue" %)**0x0800D000**. (% style="color:red" %)**VERY IMPORTANT for this address**.
Edwin Chen 13.1 210
Xiaoling 47.6 211 4. Rember to set BOOT Switch to (% style="color:blue" %)**FLASH**(%%) after update
Edwin Chen 13.1 212
Edwin Chen 42.1 213 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/WebHome/image-20221224174341-4.png?width=374&height=471&rev=1.1||alt="image-20221224174341-4.png" height="471" width="374"]]
Xiaoling 47.6 214
215