Skip to Content

Wiki source code of TCP Connection Instruction

Version 16.9 by Xiaoling on 2022/07/21 17:13
Hide last authors
Xiaoling 16.9 1 **Table of Contents:**
Xiaoling 1.1 2
Xiaoling 1.11 3 {{toc/}}
Xiaoling 1.1 4
Xiaoling 1.11 5
Xiaoling 16.2 6
7
Xiaoling 1.2 8 = 1. Introduction =
Xiaoling 1.1 9
Xiaoling 1.2 10 In the TCP IP Client mode, LoRa Gateway can accept LoRa or LoRaWAN packets and send it to the TCP/IP server.
Xiaoling 1.1 11
12
Xiaoling 1.2 13 = 2. LoRaWAN Mode TCP Connection =
Xiaoling 1.1 14
Xiaoling 1.2 15 == 2.1 Support Hardware ==
Xiaoling 1.1 16
Xiaoling 1.2 17 * [[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
18 * [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]]
Xiaoling 1.1 19
Xiaoling 16.7 20
Xiaoling 1.2 21 == 2.2 Typology & Instruction ==
Xiaoling 1.1 22
Xiaoling 3.2 23 [[image:image-20220527144058-1.png]]
Xiaoling 1.1 24
Xiaoling 1.2 25 Network Structure
Xiaoling 1.1 26
Xiaoling 16.5 27 [[Intrudctions>>Communicate with ABP End Node without LoRaWAN Network Server --- LG308||anchor="H4.Example2:CommunicatetoTCPServer"]]
Xiaoling 1.1 28
29
Xiaoling 1.2 30 = 3. Raw LoRa Mode TCP Connection =
Xiaoling 1.1 31
Xiaoling 1.3 32 == 3.1 Support Hardware ==
Xiaoling 1.2 33
Xiaoling 1.10 34 * [[LG01-N>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/143-lg01n.html]], [[OLG01-N>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/144-olg01n.html]]
35 * [[LG02>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/135-lg02.html]], [[OLG02>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/136-olg02.html]]
Xiaoling 1.2 36
Xiaoling 16.3 37
Xiaoling 1.3 38 == 3.2 Typology ==
Xiaoling 1.2 39
40 The working topology is as below. In this mode, The Uplink LoRa packets should use a customized format.
41
Xiaoling 3.2 42 [[image:image-20220527144300-2.png]]
Xiaoling 1.2 43
44 TCP/IP Forward working topology
45
46
Xiaoling 1.3 47 == 3.3 Instruction Before Firmware lgw~-~-build-v5.4.1606631585-20201129-1434 ==
Xiaoling 1.2 48
Xiaoling 1.3 49 === 3.3.1 Select TCP-IP Client mode ===
Xiaoling 1.2 50
Xiaoling 4.2 51 [[image:image-20220527144723-3.png]]
Xiaoling 1.2 52
53 Select TCP-IP Client mode
54
55
Xiaoling 1.3 56 === 3.3.2 Configure the Radio channel ===
Xiaoling 1.2 57
Xiaoling 5.2 58 [[image:image-20220527144755-4.png]]
Xiaoling 1.2 59
60 Configure the Radio channel with the match radio settings frequency as the LoRa End Node
61
62
Xiaoling 1.3 63 === 3.3.3 Configure TCP Server Info ===
Xiaoling 1.2 64
65 Note: Gateway may receive many LoRa packets, it will only transfer the packet with the same ID as specify in the channel.
66
Xiaoling 6.2 67 [[image:image-20220527144837-5.png]]
Xiaoling 1.2 68
69 Configure TCP Server Info
70
71
Xiaoling 1.6 72 === 3.3.4 About uplink data format from End Node ===
Xiaoling 1.2 73
74 The LoRa end node should upload the data with below format:
75
Xiaoling 1.5 76 (% class="box" %)
77 (((
Xiaoling 6.3 78 Uplink Format:** (% style="color:#4f81bd" %)<Channel_ID>data(%%)**
Xiaoling 1.5 79 For example, if we have configured 2 channels 12345 and 34567.
Xiaoling 1.2 80 And there is are three LoRa End nodes sending: 12345,34567,78
81 The LG02 will accept the data from 12345 and 34567, it will ignore the data from Node 78
Xiaoling 1.5 82 **Case 1**:
Xiaoling 1.2 83 Node 12345 send <12345>field1=0.0&field2=1102.0
84 Node 34567 doesn’t send anyting
Xiaoling 1.5 85 The TCP/IP server will get {"12345":"field1=0.0&field2=1102.0"}
86 **Case 2**:
Xiaoling 1.2 87 Node 12345 send <12345>field1=0.0&field2=1102.0
88 Node 34567 send <34567>temp=34
Xiaoling 1.5 89 The TCP/IP server will get {"34567":"temp=34","12345":"field1=0.0&field2=1102.0"}
90 )))
Xiaoling 1.2 91
Xiaoling 7.2 92 [[image:image-20220527144959-6.png]]
Xiaoling 1.2 93
94 Configure TCP Server Info
95
Xiaoling 1.7 96 LoRa End Device reference source code: [[check this link>>url:https://github.com/dragino/Arduino-Profile-Examples/blob/master/libraries/Dragino/examples/IoTServer/ThingSpeak/MQTT_Client/MQTT_DHT11_Client_updata_to_ThingSpeak_/MQTT_DHT11_Client_updata_to_ThingSpeak_.ino]].
Xiaoling 1.2 97
98
Xiaoling 1.3 99 == 3.4 Instruction After Firmware lgw~-~-build~-~-v5.4.1612428704~-~-20210204-1653 ==
Xiaoling 1.2 100
Xiaoling 1.3 101 === 3.4.1 Configure the Radio channel ===
Xiaoling 1.2 102
Xiaoling 8.2 103 [[image:image-20220527145111-7.png]]
Xiaoling 1.2 104
105 Configure the Radio channel with the match radio settings frequency as the LoRa End Node
106
107
Xiaoling 1.4 108 === 3.4.2 Configure TCP Server Info ===
Xiaoling 1.2 109
110 Note: Gateway will transfer the packet if they arrive in the right format .
111
Xiaoling 9.2 112 [[image:image-20220527145151-8.png]]
Xiaoling 1.2 113
114 Configure TCP Server Info
115
116
Xiaoling 1.4 117 === 3.4.3 About uplink data format from End Node ===
Xiaoling 1.2 118
119 The LoRa end node should upload the data with below format:
120
Xiaoling 1.8 121 (% class="box" %)
122 (((
Xiaoling 9.3 123 Uplink Format: (% style="color:#4f81bd" %)**<Channel_ID>data**(%%)
Xiaoling 1.2 124 And there is a LoRa End node sending below packets:
125 *<12345>Hello From Sensor1
Xiaoling 1.8 126 )))
Xiaoling 1.2 127
128
Xiaoling 1.8 129 (% class="box" %)
130 (((
131 LG01/LG02 will uplink 12345:Hello From Sensor1 and usr can use logread -f to check the log.
132 Thu Feb  4 08:21:49 2021 user.notice iot_keep_alive: use WAN or WiFi for internet access now
133 Thu Feb  4 08:21:53 2021 daemon.info tcp_process.sh[18564]: /var/iot/channels/ CREATE 12345
134 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]: Check for sensor update
135 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]: Found Data at Local Channels: 12345
136 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:
137 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:~-~-~-~--
138 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:server: 10.130.2.149
139 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:port: 60000
140 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:decoder: LG01/LG02 Raw Data
141 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:tcp_data: 12345:Hello From Sensor1;
142 Thu Feb  4 08:21:53 2021 user.notice root: [IoT.TCP]:~-~-~-~-~-~-
143 )))
Xiaoling 1.2 144
145
146 and TCP server get:
147
Xiaoling 10.2 148 [[image:image-20220527145304-9.png]]
Xiaoling 1.2 149
150 TCP Server
151
Xiaoling 1.8 152 LoRa End Device reference source code: [[check this link>>url:https://github.com/dragino/Arduino-Profile-Examples/blob/master/libraries/Dragino/examples/IoTServer/ThingSpeak/MQTT_Client/MQTT_DHT11_Client_updata_to_ThingSpeak_/MQTT_DHT11_Client_updata_to_ThingSpeak_.ino]].
Xiaoling 1.2 153
Xiaoling 1.8 154
Xiaoling 1.4 155 = 4. Reference =
Xiaoling 1.2 156
157 Set up a TCP/IP server use node.js: [[Reference Link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/customized_script/&file=node_tcp_server.txt]]