Wiki source code of TCP Connection Instruction

Version 1.6 by Xiaoling on 2022/05/12 17:07

version	line-number	content
1.2	1	Contents:
1.1	2
	3
1.2	4	= 1. Introduction =
1.1	5
1.2	6	In the TCP IP Client mode, LoRa Gateway can accept LoRa or LoRaWAN packets and send it to the TCP/IP server.
1.1	7
	8
1.2	9	= 2. LoRaWAN Mode TCP Connection =
1.1	10
1.2	11	== 2.1 Support Hardware ==
1.1	12
1.2	13	* [[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
	14	* [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]]
1.1	15
	16
1.2	17	== 2.2 Typology & Instruction ==
1.1	18
1.2	19	[[image:https://wiki.dragino.com/images/thumb/7/75/LPS8_TCP_0.png/600px-LPS8_TCP_0.png\|\|height="370" width="600"]]
1.1	20
1.2	21	Network Structure
1.1	22
1.2	23	[[Intrudctions>>url:https://wiki.dragino.com/index.php/Communication_with_ABP_End_Node#Example_2:_Communicate_to_TCP_Server]]
1.1	24
	25
1.2	26	= 3. Raw LoRa Mode TCP Connection =
1.1	27
1.3	28	== 3.1 Support Hardware ==
1.2	29
	30	* LG01N, OLG01N
	31	* LG02, OLG02
	32
	33
1.3	34	== 3.2 Typology ==
1.2	35
	36	The working topology is as below. In this mode, The Uplink LoRa packets should use a customized format.
	37
1.3	38	[[image:https://wiki.dragino.com/images/thumb/5/54/TCP_FORWARD_1.png/600px-TCP_FORWARD_1.png\|\|height="380" width="600"]]
1.2	39
	40	TCP/IP Forward working topology
	41
	42
1.3	43	== 3.3 Instruction Before Firmware lgw~-~-build-v5.4.1606631585-20201129-1434 ==
1.2	44
1.3	45	=== 3.3.1 Select TCP-IP Client mode ===
1.2	46
1.3	47	[[image:https://wiki.dragino.com/images/thumb/b/ba/TCP_FORWARD_2.png/600px-TCP_FORWARD_2.png\|\|height="159" width="600"]]
1.2	48
	49	Select TCP-IP Client mode
	50
	51
1.3	52	=== 3.3.2 Configure the Radio channel ===
1.2	53
1.3	54	[[image:https://wiki.dragino.com/images/thumb/0/0e/TCP_FORWARD_3.png/600px-TCP_FORWARD_3.png\|\|height="406" width="600"]]
1.2	55
	56	Configure the Radio channel with the match radio settings frequency as the LoRa End Node
	57
	58
1.3	59	=== 3.3.3 Configure TCP Server Info ===
1.2	60
	61	Note: Gateway may receive many LoRa packets, it will only transfer the packet with the same ID as specify in the channel.
	62
1.3	63	[[image:https://wiki.dragino.com/images/thumb/f/fb/TCP_FORWARD_4.png/600px-TCP_FORWARD_4.png\|\|height="330" width="600"]]
1.2	64
	65	Configure TCP Server Info
	66
	67
1.6	68	=== 3.3.4 About uplink data format from End Node ===
1.2	69
	70	The LoRa end node should upload the data with below format:
	71
1.5	72	(% class="box" %)
	73	(((
	74	Uplink Format: <Channel_ID>data
	75	For example, if we have configured 2 channels 12345 and 34567.
1.2	76	And there is are three LoRa End nodes sending: 12345,34567,78
	77	The LG02 will accept the data from 12345 and 34567, it will ignore the data from Node 78
1.5	78	Case 1:
1.2	79	Node 12345 send <12345>field1=0.0&field2=1102.0
	80	Node 34567 doesn’t send anyting
1.5	81	The TCP/IP server will get {"12345":"field1=0.0&field2=1102.0"}
	82	Case 2:
1.2	83	Node 12345 send <12345>field1=0.0&field2=1102.0
	84	Node 34567 send <34567>temp=34
1.5	85	The TCP/IP server will get {"34567":"temp=34","12345":"field1=0.0&field2=1102.0"}
	86	)))
1.2	87
1.4	88	[[image:https://wiki.dragino.com/images/thumb/2/22/TCP_FORWARD_5.png/600px-TCP_FORWARD_5.png\|\|height="152" width="600"]]
1.2	89
	90	Configure TCP Server Info
	91
	92	{{{LoRa End Device reference source code: .
	93	}}}
	94
	95
1.3	96	== 3.4 Instruction After Firmware lgw~-~-build~-~-v5.4.1612428704~-~-20210204-1653 ==
1.2	97
1.3	98	=== 3.4.1 Configure the Radio channel ===
1.2	99
1.4	100	[[image:https://wiki.dragino.com/images/thumb/4/40/TCP_FORWARD_7.png/600px-TCP_FORWARD_7.png\|\|height="280" width="600"]]
1.2	101
	102	Configure the Radio channel with the match radio settings frequency as the LoRa End Node
	103
	104
1.4	105	=== 3.4.2 Configure TCP Server Info ===
1.2	106
	107	Note: Gateway will transfer the packet if they arrive in the right format .
	108
1.4	109	[[image:https://wiki.dragino.com/images/thumb/3/36/TCP_FORWARD_6.png/600px-TCP_FORWARD_6.png\|\|height="149" width="600"]]
1.2	110
	111	Configure TCP Server Info
	112
	113
1.4	114	=== 3.4.3 About uplink data format from End Node ===
1.2	115
	116	The LoRa end node should upload the data with below format:
	117
	118	{{{Uplink Format: <Channel_ID>data
	119	And there is a LoRa End node sending below packets:
	120	*<12345>Hello From Sensor1
	121	}}}
	122
	123
	124	{{{LG01/LG02 will uplink 12345:Hello From Sensor1 and usr can use logread -f to check the log.
	125	Thu Feb 4 08:21:49 2021 user.notice iot_keep_alive: use WAN or WiFi for internet access now
	126	Thu Feb 4 08:21:53 2021 daemon.info tcp_process.sh[18564]: /var/iot/channels/ CREATE 12345
	127	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]: Check for sensor update
	128	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]: Found Data at Local Channels: 12345
	129	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:
	130	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:-----
	131	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:server: 10.130.2.149
	132	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:port: 60000
	133	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:decoder: LG01/LG02 Raw Data
	134	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:tcp_data: 12345:Hello From Sensor1;
	135	Thu Feb 4 08:21:53 2021 user.notice root: [IoT.TCP]:------
	136
	137	}}}
	138
	139	and TCP server get:
	140
1.5	141	[[image:https://wiki.dragino.com/images/thumb/a/a5/TCP_FORWARD_8.png/600px-TCP_FORWARD_8.png\|\|height="307" width="600"]]
1.2	142
	143	TCP Server
	144
	145	{{{LoRa End Device reference source code: .
	146	}}}
	147
1.4	148	= 4. Reference =
1.2	149
	150	Set up a TCP/IP server use node.js: [[Reference Link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/customized_script/&file=node_tcp_server.txt]]

Wiki source code of TCP Connection Instruction

Applications

Navigation