Version 52.1 by Kilight Cao on 2022/06/06 14:17
Show last authors
1 **Table of Contents：**
2
3 {{toc/}}
4
5
6
7 = **1. Enable Cellular Connection** =
8
9
10 //If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.//
11
12 [[image:image-20220601110850-2.png]]
13
14 **//Enable Cellular Connection//**
15
16
17 (((
18 //If your device doesn't have a cellular module, you will see a cellular module not detected.//
19 )))
20
21 [[image:image-20220527153544-2.png]]
22
23
24 = **2. How to Debug if Cellular connection fails** =
25
26
27 //If there is a problem with the cellular connection. Please check the below points~://
28
29
30 == **2.1 Do you order the model with a cellular option** ==
31
32
33 //Make sure you order the model with the cellular option. Can check by command or via the Web UI.//
34
35 (% class="box" %)
36 (((
37 //root@dragino-1bbd90:~~# lsusb
38 Bus 001 Device 004: ID 2c7c:0125      ~-~-> This is the Cellular module
39 Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
40 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub//
41 )))
42
43 [[image:image-20220601110748-1.png]]
44
45
46 == **2.2 Do you input the SIM card correctly** ==
47
48
49 **//Below command can check if you have a SIM card inserted, or via Web UI//**
50
51 * //Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on//
52 * //Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.//
53
54 (% class="box" %)
55 (((
56 //root@dragino-1dadd8:~~# **comgt -d /dev/ttyUSB3**
57 SIM ready
58 Waiting for Registration..(120 sec max)
59 Registered on Home network: "CHN-UNICOM",7
60 Signal Quality: 10,99//
61 )))
62
63
64 (% class="wikigeneratedid" %)
65 [[image:image-20220527153804-4.png]]
66
67
68 (% class="wikigeneratedid" %)
69 //**Note:** If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.//
70
71 (% class="wikigeneratedid" %)
72 //Please check the IP address is displayed and the Internet displays "OK", it works properly.//
73
74 (% class="wikigeneratedid" %)
75 [[image:image-20220527153827-5.png]]
76
77
78 == **2.3 Check dialing info** ==
79
80 //run "**logread -f**" in gateway CLI。//
81
82 (% class="box" %)
83 (((
84 Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
85 Fri Feb  7 01:20:29 2020 user.notice iot_keep_alive: Ping WAN
86 Fri Feb  7 01:20:29 2020 user.notice iot_keep_alive: Default interface is
87 Fri Feb  7 01:20:29 2020 user.notice iot_keep_alive: No internet at any interface
88 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: abort on (BUSY)
89 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: abort on (NO CARRIER)
90 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: abort on (ERROR)
91 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: report (CONNECT)
92 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: timeout set to 10 seconds
93 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: send (AT&F^M)
94 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: expect (OK)
95 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: AT&F^M^M
96 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: OK
97 Fri Feb  7 01:20:29 2020 local2.info chat[29485]:  ~-~- got it
98 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: send (ATE1^M)
99 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: expect (OK)
100 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: ^M
101 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: ATE1^M^M
102 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: OK
103 Fri Feb  7 01:20:29 2020 local2.info chat[29485]:  ~-~- got it
104 Fri Feb  7 01:20:29 2020 local2.info chat[29485]: send (AT+CGDCONT=1,"IP",""^M)
105 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: timeout set to 30 seconds
106 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (OK)
107 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
108 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: AT+CGDCONT=1,"IP",""^M^M
109 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: OK
110 Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
111 (% style="color:#037691" %)**Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
112 Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator**(%%)
113 (% style="color:black" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (CONNECT)
114 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
115 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ATD*99#^M^M
116 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: CONNECT
117 Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
118 Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send ( ^M)
119 Fri Feb  7 01:20:30 2020 daemon.info pppd[29452]: Serial connection established.
120 )))
121
122
123 = **3. Share Cellular Network for WiFi & LAN clients** =
124
125
126 (((
127 //By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.//
128 )))
129
130 (% class="box" %)
131 (((
132 (((
133 root@dragino-1d25dc:~~# cat /etc/config/firewall
134
135 config defaults
136 option syn_flood '1'
137 option input 'ACCEPT'
138 option output 'ACCEPT'
139 option forward 'REJECT'
140 config zone
141 option name 'lan'
142 list network 'lan'
143 option input 'ACCEPT'
144 option output 'ACCEPT'
145 option forward 'REJECT' 
146 config zone
147 option name 'wan'
148 list network 'wan'
149 list network 'wwan'
150 list network 'wan6'
151 list network 'cellular'   ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--> Add this line and reboot
152 option input 'REJECT'
153 option output 'ACCEPT'
154 option forward 'ACCEPT'
155 option masq '1'
156 option mtu_fix '1'
157 config forwarding
158 option src 'lan'
159 option dest 'wan'
160 )))
161 )))
162
163 (((
164 //and run **/etc/init.d/firewall reload** or reboot the device.//
165
166 = **4. Switching between Cellular and Ethernet and Wi-Fi networks** =
167
168 == **4.1. Switching between Cellular and Ethernet networks** ==
169
170 [[image:image-20220606140328-1.png||height="682" width="1108"]]
171
172 [[image:image-20220606140622-2.png||height="664" width="1106"]]
173
174 [[image:image-20220606140859-4.png]][[image:image-20220606140932-5.png||height="687" width="1107"]]
175
176 == **4.2 Switching between Cellular and WiFi networks** ==
177
178 [[image:image-20220606141113-7.png||height="678" width="1106"]]
179
180 [[image:image-20220606140932-5.png||height="687" width="1107"]]
181
182 == **4.3** ==
183
184
185 )))
186
187 = **5. How does the gateway view the International Mobile Equipment Identity (IMEI)** =
188
189
190 //Users can access the gateway CLI and run the minicom command to get the configuration interface.//
191
192 (((
193
194
195 **//Enter the minicom command, then select the option ''serial port setup".//**
196 )))
197
198 (% class="box infomessage" %)
199 (((
200 root@dragino-1ef9ac:~~# minicom -s
201 )))
202
203 [[image:image-20220527154132-6.png]]
204
205
206 And then, change the setting:
207
208 (% class="box infomessage" %)
209 (((
210 (% style="color:black" %)**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
211
212 (% style="color:black" %)**Bps/Par/Bits :**(% style="color:#037691" %)** 9600 8N1**
213 )))
214
215
216 //**Note: Enter the corresponding letter to change the configuration, like A,B,C**//
217
218 [[image:image-20220527154154-7.png]]
219
220
221 //Enter **AT+GSN **in the interface to get the IMEI,//
222
223 // **For example (% style="color:#037691" %)860548042566627(%%)**//
224
225 (% class="box infomessage" %)
226 (((
227 (((
228 **AT+GSN**
229 )))
230 )))
231
232 [[image:image-20220527154231-8.png]]
233
234
235 = **5. How does the gateway connect to the network via a USB 4G Dongle** =
236
237
238 == **5.1 Introduction** ==
239
240
241 (% style="color:red" %)**//Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware//**
242
243 (((
244 //This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.//
245
246
247 )))
248
249 (((
250 //Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.//
251 )))
252
253 (((
254 //This is not beginner-friendly due to too many protocols.//
255
256 //For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]//
257
258
259 )))
260
261 == **5.2 How to use the USB Dongle at the gateway** ==
262
263
264 //Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.//
265
266 (((
267 //For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.//
268 )))
269
270 (% class="box" %)
271 (((
272 Huawei-E3372/E8372
273 Check the (% style="color:#037691" %)**E3372**(% style="color:black" %) version to determine the mode.
274 The version numbers starting with 21 is NCM mode
275 The version numbers starting with 22 is Hilink mode
276 The E8372 only has Hilink mode
277 **~ **(% style="color:red" %)**Note： The e3372 in the vast majority of cases is Hilink mode**
278 )))
279
280
281 == **5.3 Hilink mode** ==
282
283
284 //Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
285
286
287 === **5.3.1 Plugs into the device** ===
288
289
290 (((
291 //USB-Dongle plugs into the gateway USB port//
292 )))
293
294 (((
295 //Check the USB module via command (% style="color:#037691" %)**lsusb**//
296 )))
297
298 (((
299 (% style="color:red" %)//**Note: Users need to that connect to the gateway command line via ssh.**//
300 )))
301
302 [[image:image-20220527154739-9.png]]
303
304
305 === **5.3.2 Detection of new network interfaces added** ===
306
307
308 //Check network configuration command line input: //
309
310 (% class="box infomessage" %)
311 (((
312 (((
313 root@dragino-1ef9ac:~~# ifconfig -a
314 )))
315 )))
316
317 [[image:image-20220527154822-10.png]]
318
319 //In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**//
320
321 //Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**//
322
323
324 === **5.3.3 Add the new interface to the network configuration.** ===
325
326
327 //Enter the configuration from the command line~://
328
329 (% class="box" %)
330 (((
331 uci set network.lte=interface
332 uci set network.lte.proto=dhcp
333 uci set network.lte.ifname=eth2    ~-~-~-~-~-~-~-~-->#This depend on the name of the new interface gateway add
334 uci commit network
335 uci set firewall.@zone[1].network="wan wwan wan6 lte"
336 uci commit firewall
337 /etc/init.d/network restart
338 )))
339
340 [[image:image-20220527154937-11.png]]
341
342
343 //**Checking Network Configurations**//
344
345 //Command-line input: (% style="color:#037691" %)**ifconfig**//
346
347 [[image:image-20220527155013-12.png]]
348
349 //Now, Gateway is configured to access the internet on the LTE network.//
350
351
352 == **5.4 NCM mode** ==
353
354
355 == **5.5 Troubleshooting** ==
356
357
358 === **5.5.1 The USB-Dongle interface cannot obtain the IP address.** ===
359
360
361 //Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.//
362
363
364 = **6. How to reduce data traffic** =
365
366
367 == **6.1 Reduce Status Uplink Interval** ==
368
369
370 **//The gateways will use the data traffic below two places.//**
371
372
373 //1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.//
374
375 //For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.//
376
377 [[image:image-20220527155108-13.png]]
378
379
380 //2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.//
381
382 //For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.//
383
384 [[image:image-20220527155358-16.png]]
385
386 //System General interface//
387
388
389 [[image:image-20220527155229-15.png]]
390
391 //Keepalive script interval time settings//
392
393
394 == **6.2 Filter unwanted packets** ==
395
396 See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
397
398

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0