Last modified by Kilight Cao on 2024/12/31 16:38
<
From version < 98.1 >
edited by Kilight Cao
on 2024/07/12 13:54
To version < 103.1 >
edited by Kilight Cao
on 2024/12/05 15:44
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,11 +1,11 @@
1 -
1 +**Table of Contents:**
2 2  
3 -**Table of Contents：**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
7 +
8 +
9 9  = 1. Enable Cellular Connection =
10 10  
11 11  
... ... @@ -29,9 +29,11 @@
29 29  If there is a problem with the cellular connection. Please check the below points:
30 30  
31 31  
32 -== 2.1 Do you order the model with a cellular option ==
32 +== 2.1 For LPS8N/DLOS8N/LG308N ==
33 33  
34 +=== 2.1.1 Do you order the model with a cellular option ===
34 34  
36 +
35 35  Make sure you order the model with the cellular option. Can check by command or via the Web UI.
36 36  
37 37  (% class="box" %)
... ... @@ -45,7 +45,7 @@
45 45  [[image:image-20220601110748-1.png]]
46 46  
47 47  
48 -== 2.2 Do you input the SIM card correctly ==
50 +=== 2.1.2 Do you input the SIM card correctly ===
49 49  
50 50  
51 51  **Below command can check if you have a SIM card inserted, or via Web UI**
... ... @@ -78,7 +78,7 @@
78 78  [[image:image-20220527153827-5.png]]
79 79  
80 80  
81 -== 2.3 Check dialing info ==
83 +=== 2.1.3 Check dialing info ===
82 82  
83 83  
84 84  run "**logread -f**" in gateway CLI。
... ... @@ -124,6 +124,179 @@
124 124  )))
125 125  
126 126  
129 +== 2.2 For LPS8v2/MS48-LR ==
130 +
131 +=== (% id="cke_bm_23549S" style="display:none" %) (%%)2.2.1 Do you order the model with a cellular option ===
132 +
133 +
134 +Make sure you order the model with the cellular option. Can check by command or via the Web UI.
135 +
136 +(% class="box" %)
137 +(((
138 +//root@dragino-2d5d26:~~# lsusb
139 +Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
140 +Bus 004 Device 002: ID 2c7c:0125 Quectel Wireless Solutions Co., Ltd. EC25 LTE modem    ~-~-> This is the Cellular module
141 +Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
142 +Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
143 +Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
144 +Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
145 +Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
146 +Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
147 +Bus 001 Device 002: ID 0bda:f179 Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter
148 +Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
149 +Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
150 +root@dragino-2d5d26:~~# //
151 +)))
152 +
153 +[[image:image-20241205150916-1.png]]
154 +
155 +
156 +
157 +=== 2.1.3 Check cellular info ===
158 +
159 +
160 +run "**quectel-CM**" in gateway CLI
161 +
162 +(% class="box infomessage" %)
163 +(((
164 +Usage:  /usr/bin/quectel-CM [options]
165 + -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
166 + -p pincode Verify sim card pin if sim card is locked
167 + -p [quectel-][qmi|mbim]-proxy  Request to use proxy
168 + -f logfilename Save log message of this program to file
169 + -u usbmonlog filename  Save usbmon log to file
170 + -i interface Specify which network interface to setup data call when multi-modems exits
171 + -4 Setup IPv4 data call (default)
172 + -6 Setup IPv6 data call
173 + -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
174 + -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
175 + -b Enable network interface bridge function (default 0)
176 + -v Verbose log mode, for debug purpose.[Examples]
177 +Example 1: /usr/bin/quectel-CM
178 +Example 2: /usr/bin/quectel-CM -s 3gnet
179 +Example 3: /usr/bin/quectel-CM -s 3gnet -v
180 +)))
181 +
182 +
183 +==== **The gateway cellular logs show SIMStatus: SIM_ABSENT** ====
184 +
185 +
186 +If the SIM status is **SIM_ABSENT**, the SIM card is not detected. You need to check whether the SIM card is available and whether the device is powered off when the SIM card is installed.
187 +
188 +(% class="box" %)
189 +(((
190 +root@dragino-2d5d26:~~# quectel-CM -s 3gnet
191 +[12-05_07:12:08:451] Quectel_QConnectManager_Linux_V1.6.0.24
192 +[12-05_07:12:08:454] Find /sys/bus/usb/devices/4-1 idVendor=0x2c7c idProduct=0x125, bus=0x004, dev=0x002
193 +[12-05_07:12:08:455] Auto find qmichannel = /dev/cdc-wdm0
194 +[12-05_07:12:08:455] Auto find usbnet_adapter = wwan0
195 +[12-05_07:12:08:455] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
196 +[12-05_07:12:08:456] Modem works in QMI mode
197 +[12-05_07:12:08:516] cdc_wdm_fd = 7
198 +[12-05_07:12:08:613] Get clientWDS = 21
199 +[12-05_07:12:08:645] Get clientDMS = 1
200 +[12-05_07:12:08:676] Get clientNAS = 4
201 +[12-05_07:12:08:709] Get clientUIM = 2
202 +[12-05_07:12:08:741] Get clientWDA = 1
203 +[12-05_07:12:08:774] requestBaseBandVersion EC25EFAR06A16M4G
204 +[12-05_07:12:08:902] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_ABSENT ~-~-~-~--> This means that the SIM cannot be read**(%%)
205 +[12-05_07:12:08:902] requestSetProfile[1] 3gnet~/~//0
206 +[12-05_07:12:08:965] requestGetProfile[1] 3gnet~/~//0
207 +[12-05_07:12:08:997] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW
208 +[12-05_07:12:09:030] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
209 +[12-05_07:12:09:030] ifconfig wwan0 0.0.0.0
210 +[12-05_07:12:09:043] ifconfig wwan0 down
211 +^C[12-05_07:12:18:311] QmiWwanThread exit
212 +[12-05_07:12:18:313] qmi_main exit
213 +)))
214 +
215 +
216 +==== **The gateway cellular logs show SIMStatus: SIM_PIN** ====
217 +
218 +
219 +If the SIM status is **SIM_PIN**, it means that the SIM card is read but the Pincode needs to be filled in.
220 +
221 +(% class="box" %)
222 +(((
223 +root@dragino-2d5d26:~~# quectel-CM -s 3gnet
224 +
225 +[10-31_12:17:10:166] Find /sys/bus/usb/devices/2-1 idVendor=0x2c7c idProduct=0x125, bus=0x002, dev=0x002
226 +[10-31_12:17:10:168] Auto find qmichannel = /dev/cdc-wdm0
227 +[10-31_12:17:10:168] Auto find usbnet_adapter = wwan0
228 +[10-31_12:17:10:168] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
229 +[10-31_12:17:10:170] Modem works in QMI mode
230 +[10-31_12:17:10:234] cdc_wdm_fd = 8
231 +[10-31_12:17:10:325] Get clientWDS = 21
232 +[10-31_12:17:10:356] Get clientDMS = 1
233 +[10-31_12:17:10:389] Get clientNAS = 4
234 +[10-31_12:17:10:449] Get clientUIM = 2
235 +[10-31_12:17:10:489] Get clientWDA = 1
236 +[10-31_12:17:10:518] requestBaseBandVersion EC25EFAR06A16M4G
237 +[10-31_12:17:10:645] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_PIN ~-~-~-~--> This means you need to fill in the Pincode**(%%)
238 +[10-31_12:17:10:645] requestSetProfile[1] Telekom~/~//0
239 +[10-31_12:17:10:713] requestGetProfile[1] Telekom~/~//0
240 +[10-31_12:17:10:743] requestRegistrationState2 MCC: 262, MNC: 2, PS: Detached, DataCap: UNKNOW
241 +[10-31_12:17:10:773] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
242 +[10-31_12:17:10:774] ifconfig wwan0 0.0.0.0
243 +[10-31_12:17:10:790] ifconfig wwan0 down
244 +[10-31_18:27:35:797] QmiWwanThread exit
245 +[10-31_18:27:35:798] qmi_main exit
246 +)))
247 +
248 +
249 +==== **The gateway cellular logs show SIMStatus: SIM_READY** ====
250 +
251 +
252 +If the SIM status is **SIM_READY**,** ** it means that the SIM card is detected
253 +
254 +(% class="box" %)
255 +(((
256 +root@dragino-2d5d26:~~# quectel-CM 
257 +[12-05_07:32:57:187] Quectel_QConnectManager_Linux_V1.6.0.24
258 +[12-05_07:32:57:191] Find /sys/bus/usb/devices/4-1 idVendor=0x2c7c idProduct=0x125, bus=0x004, dev=0x002
259 +[12-05_07:32:57:192] Auto find qmichannel = /dev/cdc-wdm0
260 +[12-05_07:32:57:193] Auto find usbnet_adapter = wwan0
261 +[12-05_07:32:57:198] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
262 +[12-05_07:32:57:199] Modem works in QMI mode
263 +[12-05_07:32:57:261] cdc_wdm_fd = 7
264 +[12-05_07:32:57:334] Get clientWDS = 20
265 +[12-05_07:32:57:366] Get clientDMS = 1
266 +[12-05_07:32:57:398] Get clientNAS = 4
267 +[12-05_07:32:57:431] Get clientUIM = 1
268 +[12-05_07:32:57:462] Get clientWDA = 1
269 +[12-05_07:32:57:495] requestBaseBandVersion EC25EFAR06A16M4G
270 +[12-05_07:32:57:623] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_READY**(%%)
271 +[12-05_07:32:57:655] requestGetProfile[1] 3gnet~/~//0
272 +[12-05_07:32:57:687] requestRegistrationState2 MCC: 460, MNC: 15, PS: Detached, DataCap: UNKNOW
273 +[12-05_07:32:57:719] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
274 +[12-05_07:32:57:719] ifconfig wwan0 0.0.0.0
275 +[12-05_07:32:57:731] ifconfig wwan0 down
276 +[12-05_07:33:00:727] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW
277 +[12-05_07:33:15:895] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: UNKNOW
278 +[12-05_07:33:19:063] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: EDGE
279 +[12-05_07:33:19:095] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: EDGE
280 +[12-05_07:33:21:463] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: EDGE
281 +[12-05_07:33:22:359] requestSetupDataCall WdsConnectionIPv4Handle: 0x8728b3d0
282 +[12-05_07:33:22:488] ifconfig wwan0 up
283 +[12-05_07:33:22:504] busybox udhcpc -f -n -q -t 5 -i wwan0
284 +udhcpc: started, v1.30.1
285 +udhcpc: sending discover
286 +udhcpc: sending discover
287 +udhcpc: sending discover
288 +udhcpc: sending discover
289 +udhcpc: sending discover
290 +udhcpc: no lease, failing
291 +[12-05_07:33:38:103] File:ql_raw_ip_mode_check Line:136 udhcpc fail to get ip address, try next:
292 +[12-05_07:33:38:103] ifconfig wwan0 down
293 +[12-05_07:33:38:116] echo Y > /sys/class/net/wwan0/qmi/raw_ip
294 +[12-05_07:33:38:117] ifconfig wwan0 up
295 +[12-05_07:33:38:130] busybox udhcpc -f -n -q -t 5 -i wwan0
296 +udhcpc: started, v1.30.1
297 +udhcpc: sending discover
298 +udhcpc: sending select for 10.171.60.177
299 +udhcpc: lease of 10.171.60.177 obtained, lease time 7200
300 +)))
301 +
127 127  == 2.4 If the following situation occurs, how can users solve this problem? ==
128 128  
129 129  === 2.4.1 The gateway can read the SIM card, But the Internet is displayed as Fail. ===
... ... @@ -496,6 +496,7 @@
496 496  
497 497  == 7.1 How the gateway will consume data traffic ==
498 498  
674 +
499 499  Below list the place where the data traffic will use.
500 500  
501 501  * Valid uplink data to LoRaWAN server or IoT server. ( We can't reduce this as they are the data we want)
... ... @@ -505,34 +505,21 @@
505 505  * system Time synchronization Checking
506 506  * Auto update ( Software auto update, can be disabled)
507 507  
508 -=== 7.1.1 LoRaWAN Status push or polling data to LoRaWAN server ===
684 +=== 7.1.1 Uploading backup files to reduced data consumption ===
509 509  
510 510  
511 -When gateway connect to LoRaWAN server via LoRaWAN protocol, besides the sensor data uplink/downlink. gateway will still need to:
687 +Users can upload this backup file to reduce data consumption in **System~-~->Back Up/Restore Config**, Download link for backup file: **[[attach:Reduced_data_consumption.tar.gz||target="_blank"]]**
512 512  
513 -* Uplink self-status to the LoRaWAN server every 30s. the users can adjust **Keep Alive Period** as below
514 -* Check LoRaWAN server status every 5 seconds to see if there is valid downlink command to sensors. We don't provide WEB UI option to modify this time, because the modify of this settings will lead to fail on OTAA Join and Downlink commands.
689 +[[image:image-20240712093532-1.png]]
515 515  
516 -[[image:image-20220527155108-13.png]]
517 517  
692 +=== 7.1.2 Auto update ===
518 518  
519 -=== 7.1.2 System Keep Alive data ===
520 520  
521 -
522 -System Keep Alive Data is used to check gateway-network status and fix possible issue. Gateway will check every 15 seconds and generate traffic.
523 -
524 -Base on 15 seconds per check, the data traffic is about 2M data traffic per day. Users can adjust **Keepalive Interval** as below.
525 -
526 -[[image:image-20220527155229-15.png||height="511" width="986"]]
527 -
528 -
529 -=== 7.1.3 Auto update ===
530 -
531 -
532 532  Gateway will check for update every day for new configure or software. User can disable them by below method.
533 533  
534 534  
535 -=== 7.1.4 Filter unwanted packets ===
698 +=== 7.1.3 Filter unwanted packets ===
536 536  
537 537  
538 538  When gateway connect to LoRaWAN server via LoRaWAN protocol , Gateway will by default get every possible LoRaWAN packets and forward to LoRaWAN server. If there are sensors from others in the same area, such sensor data will also be forward to LoRaWAN server ( they will be ignore by the server). This also consume data.
image-20241205150916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0