Last modified by Kilight Cao on 2024/12/31 16:38
<
From version < 82.1 >
edited by Kilight Cao
on 2023/03/13 10:56
To version < 104.1 >
edited by Kilight Cao
on 2024/12/05 15:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,16 +1,16 @@
1 -
1 +**Table of Contents:**
2 2  
3 -**Table of Contents：**
4 -
5 5  {{toc/}}
6 6  
7 7  
8 8  
9 -= **1. Enable Cellular Connection** =
10 10  
11 11  
12 -//If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.//
9 += 1. Enable Cellular Connection =
13 13  
11 +
12 +If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.
13 +
14 14  [[image:image-20220601110850-2.png]]
15 15  
16 16  **//Enable Cellular Connection//**
... ... @@ -17,25 +17,25 @@
17 17  
18 18  
19 19  (((
20 -//If your device doesn't have a cellular module, you will see a cellular module not detected.//
20 +If your device doesn't have a cellular module, you will see a cellular module not detected.
21 21  )))
22 22  
23 23  [[image:image-20220527153544-2.png]]
24 24  
25 25  
26 += 2. How to Debug if Cellular connection fails =
26 26  
27 -= **2. How to Debug if Cellular connection fails** =
28 28  
29 +If there is a problem with the cellular connection. Please check the below points:
29 29  
30 -//If there is a problem with the cellular connection. Please check the below points~://
31 31  
32 +== 2.1 For LPS8N/DLOS8N/LG308N ==
32 32  
34 +=== 2.1.1 Do you order the model with a cellular option ===
33 33  
34 -== **2.1 Do you order the model with a cellular option** ==
35 35  
37 +Make sure you order the model with the cellular option. Can check by command or via the Web UI.
36 36  
37 -//Make sure you order the model with the cellular option. Can check by command or via the Web UI.//
38 -
39 39  (% class="box" %)
40 40  (((
41 41  //root@dragino-1bbd90:~~# lsusb
... ... @@ -47,17 +47,17 @@
47 47  [[image:image-20220601110748-1.png]]
48 48  
49 49  
50 +=== 2.1.2 Do you input the SIM card correctly ===
50 50  
51 -== **2.2 Do you input the SIM card correctly** ==
52 52  
53 +**Below command can check if you have a SIM card inserted, or via Web UI**
53 53  
54 -**//Below command can check if you have a SIM card inserted, or via Web UI//**
55 +* Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on
56 +* Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.
55 55  
56 -* //Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on//
57 -* //Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.//
58 -
59 59  (% class="box" %)
60 60  (((
60 +(% class="mark" %)**For Models: LPS8N, LG308N, DLOS8N**(%%)
61 61  //root@dragino-1dadd8:~~# **comgt -d /dev/ttyUSB3**
62 62  SIM ready
63 63  Waiting for Registration..(120 sec max)
... ... @@ -71,21 +71,20 @@
71 71  
72 72  
73 73  (% class="wikigeneratedid" %)
74 -//**​​(% style="color:red" %)Note:(%%)**(% style="color:red" %) **If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.**//
74 +**​​(% style="color:red" %)Note:(%%)**(% style="color:red" %) **If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.**
75 75  
76 76  (% class="wikigeneratedid" %)
77 -//Please check the IP address is displayed and the Internet displays "OK", it works properly.//
77 +Please check the IP address is displayed and the Internet displays "OK", it works properly.
78 78  
79 79  (% class="wikigeneratedid" %)
80 80  [[image:image-20220527153827-5.png]]
81 81  
82 82  
83 +=== 2.1.3 Check dialing info ===
83 83  
84 -== **2.3 Check dialing info** ==
85 85  
86 +run "**logread -f**" in gateway CLI。
86 86  
87 -//run "**logread -f**" in gateway CLI。//
88 -
89 89  (% class="box" %)
90 90  (((
91 91  Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
... ... @@ -127,57 +127,220 @@
127 127  )))
128 128  
129 129  
129 +== 2.2 For LPS8v2/MS48-LR ==
130 130  
131 -== **2.4 If the following situation occurs, how can users solve this problem?** ==
131 +=== (% id="cke_bm_23549S" style="display:none" %) (%%)2.2.1 Do you order the model with a cellular option ===
132 132  
133 133  
134 -=== **2.4.1 The gateway can read the SIM card, But the Internet is displayed as Fail.** ===
134 +Make sure you order the model with the cellular option. Can check by command or via the Web UI.
135 135  
136 +(% class="box" %)
137 +(((
138 +//root@dragino-2d5d26:~~# lsusb
139 +Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
140 +Bus 004 Device 002: ID 2c7c:0125 Quectel Wireless Solutions Co., Ltd. EC25 LTE modem    ~-~-> This is the Cellular module
141 +Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
142 +Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
143 +Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
144 +Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
145 +Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
146 +Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
147 +Bus 001 Device 002: ID 0bda:f179 Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter
148 +Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
149 +Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
150 +root@dragino-2d5d26:~~# //
151 +)))
136 136  
137 -//Users can check whether the APN matched by the SIM card is correct.//
153 +[[image:image-20241205150916-1.png]]
138 138  
139 -//Regarding what APN your SIM card should use, Users can search for the APN corresponding to the SIM card by Google or ask the carrier.//
140 140  
141 141  
142 -[[image:image-20220718155937-1.png||height="562" width="497"]]
157 +=== 2.2.3 Check cellular info ===
143 143  
144 144  
160 +run "**quectel-CM**" in gateway CLI
145 145  
146 -=== **2.4.2 The gateway can read the SIM card, But the Internet is displayed as Fail, and at the same time Network displays the carrier network.** ===
162 +(% class="box infomessage" %)
163 +(((
164 +Usage:  /usr/bin/quectel-CM [options]
165 + -s [apn [user password auth]]  Set apn/user/password/auth get from your network provider. auth: 1~~pap, 2~~chap
166 + -p pincode Verify sim card pin if sim card is locked
167 + -p [quectel-][qmi|mbim]-proxy  Request to use proxy
168 + -f logfilename Save log message of this program to file
169 + -u usbmonlog filename  Save usbmon log to file
170 + -i interface Specify which network interface to setup data call when multi-modems exits
171 + -4 Setup IPv4 data call (default)
172 + -6 Setup IPv6 data call
173 + -k pdn Specify which pdn to hangup data call (by send SIGINT to 'quectel-CM -n pdn')
174 + -m iface-idx Bind QMI data call to wwan0_<iface idx> when QMAP used. E.g '-n 7 -m 1' bind pdn-7 data call to wwan0_1
175 + -b Enable network interface bridge function (default 0)
176 + -v Verbose log mode, for debug purpose.[Examples]
177 +Example 1: /usr/bin/quectel-CM
178 +Example 2: /usr/bin/quectel-CM -s 3gnet
179 +Example 3: /usr/bin/quectel-CM -s 3gnet -v
180 +)))
147 147  
148 148  
149 -//It should be SIM card no flow, users can insert SIM cards into the mobile phone for testing.//
183 +==== **The gateway cellular logs show SIMStatus: SIM_ABSENT** ====
150 150  
151 151  
152 -[[image:1658131428288-728.png||height="538" width="494"]]
186 +If the SIM status is **SIM_ABSENT**, the SIM card is not detected. You need to check whether the SIM card is available and whether the device is powered off when the SIM card is installed.
153 153  
188 +(% class="box" %)
189 +(((
190 +root@dragino-2d5d26:~~# quectel-CM -s 3gnet
191 +[12-05_07:12:08:451] Quectel_QConnectManager_Linux_V1.6.0.24
192 +[12-05_07:12:08:454] Find /sys/bus/usb/devices/4-1 idVendor=0x2c7c idProduct=0x125, bus=0x004, dev=0x002
193 +[12-05_07:12:08:455] Auto find qmichannel = /dev/cdc-wdm0
194 +[12-05_07:12:08:455] Auto find usbnet_adapter = wwan0
195 +[12-05_07:12:08:455] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
196 +[12-05_07:12:08:456] Modem works in QMI mode
197 +[12-05_07:12:08:516] cdc_wdm_fd = 7
198 +[12-05_07:12:08:613] Get clientWDS = 21
199 +[12-05_07:12:08:645] Get clientDMS = 1
200 +[12-05_07:12:08:676] Get clientNAS = 4
201 +[12-05_07:12:08:709] Get clientUIM = 2
202 +[12-05_07:12:08:741] Get clientWDA = 1
203 +[12-05_07:12:08:774] requestBaseBandVersion EC25EFAR06A16M4G
204 +[12-05_07:12:08:902] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_ABSENT ~-~-~-~--> This means that the SIM cannot be read**(%%)
205 +[12-05_07:12:08:902] requestSetProfile[1] 3gnet~/~//0
206 +[12-05_07:12:08:965] requestGetProfile[1] 3gnet~/~//0
207 +[12-05_07:12:08:997] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW
208 +[12-05_07:12:09:030] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
209 +[12-05_07:12:09:030] ifconfig wwan0 0.0.0.0
210 +[12-05_07:12:09:043] ifconfig wwan0 down
211 +^C[12-05_07:12:18:311] QmiWwanThread exit
212 +[12-05_07:12:18:313] qmi_main exit
213 +)))
154 154  
155 155  
156 -=== **2.4.3 The gateway can't read the SIM card, and the Internet is displayed as Fail.** ===
216 +==== **The gateway cellular logs show SIMStatus: SIM_PIN** ====
157 157  
158 158  
159 -//Users need to check whether the SIM card type is suitable for the EC25 module.//
219 +If the SIM status is **SIM_PIN**, it means that the SIM card is read but the Pincode needs to be filled in.
160 160  
221 +(% class="box" %)
222 +(((
223 +root@dragino-2d5d26:~~# quectel-CM -s 3gnet
161 161  
162 -[[image:1658131612484-845.png||height="549" width="499"]]
225 +[10-31_12:17:10:166] Find /sys/bus/usb/devices/2-1 idVendor=0x2c7c idProduct=0x125, bus=0x002, dev=0x002
226 +[10-31_12:17:10:168] Auto find qmichannel = /dev/cdc-wdm0
227 +[10-31_12:17:10:168] Auto find usbnet_adapter = wwan0
228 +[10-31_12:17:10:168] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
229 +[10-31_12:17:10:170] Modem works in QMI mode
230 +[10-31_12:17:10:234] cdc_wdm_fd = 8
231 +[10-31_12:17:10:325] Get clientWDS = 21
232 +[10-31_12:17:10:356] Get clientDMS = 1
233 +[10-31_12:17:10:389] Get clientNAS = 4
234 +[10-31_12:17:10:449] Get clientUIM = 2
235 +[10-31_12:17:10:489] Get clientWDA = 1
236 +[10-31_12:17:10:518] requestBaseBandVersion EC25EFAR06A16M4G
237 +[10-31_12:17:10:645] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_PIN ~-~-~-~--> This means you need to fill in the Pincode**(%%)
238 +[10-31_12:17:10:645] requestSetProfile[1] Telekom~/~//0
239 +[10-31_12:17:10:713] requestGetProfile[1] Telekom~/~//0
240 +[10-31_12:17:10:743] requestRegistrationState2 MCC: 262, MNC: 2, PS: Detached, DataCap: UNKNOW
241 +[10-31_12:17:10:773] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
242 +[10-31_12:17:10:774] ifconfig wwan0 0.0.0.0
243 +[10-31_12:17:10:790] ifconfig wwan0 down
244 +[10-31_18:27:35:797] QmiWwanThread exit
245 +[10-31_18:27:35:798] qmi_main exit
246 +)))
163 163  
164 164  
249 +==== **The gateway cellular logs show SIMStatus: SIM_READY** ====
165 165  
166 -=== **2.4.4 SIM display：~*~**SIM ERROR~*~** Check SIM is inserted test SIM in a mobile phone？** ===
167 167  
252 +If the SIM status is **SIM_READY**,** ** it means that the SIM card is detected
168 168  
169 -//Users can insert SIM cards into the mobile phone for testing.//
254 +(% class="box" %)
255 +(((
256 +root@dragino-2d5d26:~~# quectel-CM 
257 +[12-05_07:32:57:187] Quectel_QConnectManager_Linux_V1.6.0.24
258 +[12-05_07:32:57:191] Find /sys/bus/usb/devices/4-1 idVendor=0x2c7c idProduct=0x125, bus=0x004, dev=0x002
259 +[12-05_07:32:57:192] Auto find qmichannel = /dev/cdc-wdm0
260 +[12-05_07:32:57:193] Auto find usbnet_adapter = wwan0
261 +[12-05_07:32:57:198] netcard driver = qmi_wwan, driver version = 5.15.43-draginohp0z
262 +[12-05_07:32:57:199] Modem works in QMI mode
263 +[12-05_07:32:57:261] cdc_wdm_fd = 7
264 +[12-05_07:32:57:334] Get clientWDS = 20
265 +[12-05_07:32:57:366] Get clientDMS = 1
266 +[12-05_07:32:57:398] Get clientNAS = 4
267 +[12-05_07:32:57:431] Get clientUIM = 1
268 +[12-05_07:32:57:462] Get clientWDA = 1
269 +[12-05_07:32:57:495] requestBaseBandVersion EC25EFAR06A16M4G
270 +[12-05_07:32:57:623] (% style="color:#037691" %)**requestGetSIMStatus SIMStatus: SIM_READY**(%%)
271 +[12-05_07:32:57:655] requestGetProfile[1] 3gnet~/~//0
272 +[12-05_07:32:57:687] requestRegistrationState2 MCC: 460, MNC: 15, PS: Detached, DataCap: UNKNOW
273 +[12-05_07:32:57:719] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
274 +[12-05_07:32:57:719] ifconfig wwan0 0.0.0.0
275 +[12-05_07:32:57:731] ifconfig wwan0 down
276 +[12-05_07:33:00:727] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW
277 +[12-05_07:33:15:895] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: UNKNOW
278 +[12-05_07:33:19:063] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: EDGE
279 +[12-05_07:33:19:095] requestRegistrationState2 MCC: 460, MNC: 0, PS: Detached, DataCap: EDGE
280 +[12-05_07:33:21:463] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: EDGE
281 +[12-05_07:33:22:359] requestSetupDataCall WdsConnectionIPv4Handle: 0x8728b3d0
282 +[12-05_07:33:22:488] ifconfig wwan0 up
283 +[12-05_07:33:22:504] busybox udhcpc -f -n -q -t 5 -i wwan0
284 +udhcpc: started, v1.30.1
285 +udhcpc: sending discover
286 +udhcpc: sending discover
287 +udhcpc: sending discover
288 +udhcpc: sending discover
289 +udhcpc: sending discover
290 +udhcpc: no lease, failing
291 +[12-05_07:33:38:103] File:ql_raw_ip_mode_check Line:136 udhcpc fail to get ip address, try next:
292 +[12-05_07:33:38:103] ifconfig wwan0 down
293 +[12-05_07:33:38:116] echo Y > /sys/class/net/wwan0/qmi/raw_ip
294 +[12-05_07:33:38:117] ifconfig wwan0 up
295 +[12-05_07:33:38:130] busybox udhcpc -f -n -q -t 5 -i wwan0
296 +udhcpc: started, v1.30.1
297 +udhcpc: sending discover
298 +udhcpc: sending select for 10.171.60.177
299 +udhcpc: lease of 10.171.60.177 obtained, lease time 7200
300 +)))
170 170  
302 +== 2.3 If the following situation occurs, how can users solve this problem? ==
171 171  
172 -[[image:image-20220718160804-3.png||height="602" width="500"]]
304 +=== 2.3.1 The gateway can read the SIM card, But the Internet is displayed as Fail. ===
173 173  
174 174  
307 +Users can check whether the APN matched by the SIM card is correct.
175 175  
176 -= **3. Share Cellular Network for WiFi & LAN clients** =
309 +Regarding what APN your SIM card should use, Users can search for the APN corresponding to the SIM card by Google or ask the carrier.
177 177  
311 +[[image:image-20220718155937-1.png||height="562" width="497"]]
178 178  
313 +
314 +=== 2.3.2 The gateway can read the SIM card, But the Internet is displayed as Fail, and at the same time Network displays the carrier network. ===
315 +
316 +
317 +It should be SIM card no flow, users can insert SIM cards into the mobile phone for testing.
318 +
319 +[[image:1658131428288-728.png||height="538" width="494"]]
320 +
321 +
322 +=== 2.3.3 The gateway can't read the SIM card, and the Internet is displayed as Fail. ===
323 +
324 +
325 +Users need to check whether the SIM card type is suitable for the EC25 module.
326 +
327 +[[image:1658131612484-845.png||height="549" width="499"]]
328 +
329 +
330 +=== 2.3.4 SIM display：~*~**SIM ERROR~*~** Check SIM is inserted test SIM in a mobile phone？ ===
331 +
332 +
333 +Users can insert SIM cards into the mobile phone for testing.
334 +
335 +[[image:image-20220718160804-3.png||height="602" width="500"]]
336 +
337 +
338 += 3. Share Cellular Network for WiFi & LAN clients =
339 +
340 +
179 179  (((
180 -//By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.//
342 +By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.
181 181  )))
182 182  
183 183  (% class="box" %)
... ... @@ -214,19 +214,17 @@
214 214  )))
215 215  
216 216  (((
217 -//and run **/etc/init.d/firewall reload** or reboot the device.//
379 +and run **/etc/init.d/firewall reload** or **reboot the device**.
218 218  
219 219  
382 += 4. Switching between Cellular and Ethernet and Wi-Fi networks =
220 220  
221 -= **4. Switching between Cellular and Ethernet and Wi-Fi networks** =
222 222  
385 +By default, Cell is the backup WAN where the Ethernet or Wi-Fi network is used first if they are available.
223 223  
224 -//By default, Cell is the backup WAN where the Ethernet or Wi-Fi network is used first if they are available.//
387 +Once the Ethernet of the Wi-Fi network is unavailable where the gateway network will switch to a Cell network from Ethernet or Wi-Fi.
225 225  
226 -//Once the Ethernet of the Wi-Fi network is unavailable where the gateway network will switch to a Cell network from Ethernet or Wi-Fi.//
227 227  
228 -
229 -
230 230  **Enable Cellular and connect Ethernet at the same time**
231 231  
232 232  ETH icon is displayed as ​​​ [[image:1658135519305-444.png||height="18" width="19"]] Indicates that Ethernet is the main working network.
... ... @@ -234,77 +234,87 @@
234 234  Cell icon is displayed as  [[image:1658135500498-725.png||height="17" width="17"]] Indicates that Cellular is the backup WAN.
235 235  
236 236  
237 -(% style="display:none" %) (%%)
397 +== 4.1 Switching between Cellular and Ethernet networks ==
238 238  
239 -== **4.1 Switching between Cellular and Ethernet networks** ==
240 240  
400 +When connecting to the AP WiFI of the gateway, users can access the Web UI of the gateway through the default address 10.130.1.1
241 241  
242 -//When connecting to the AP WiFI of the gateway, users can access the Web UI of the gateway through the default address 10.130.1.1//
243 -
244 244  [[image:image-20220606140622-2.png||height="664" width="1106"]]
245 245  
246 246  
247 -//**Remove the network cable from the WAN port on the gateway, the gateway will switch to a Cellular network.**//
405 +**Remove the network cable from the WAN port on the gateway, the gateway will switch to a Cellular network.**
248 248  
249 249  [[image:image-20220606140859-4.png||height="687" width="1107"]]
250 250  
251 251  (% style="display:none" %) (%%)
252 252  
411 +== 4.2 Switching between Cellular and WiFi networks ==
253 253  
254 -== **4.2 Switching between Cellular and WiFi networks** ==
255 255  
256 -
257 257  (% class="wikigeneratedid" %)
258 -//Enable **Cellular** and connect **WiFi** at the same time//
415 +Enable **Cellular** and connect **WiFi** at the same time
259 259  
260 -//WiFi icon is displayed as ​​​//[[image:1658135519305-444.png||height="23" width="24"]] Indicates that WiFi is the main working network.
417 +WiFi icon is displayed as ​​​[[image:1658135519305-444.png||height="23" width="24"]] Indicates that WiFi is the main working network.
261 261  
262 -//Cell icon is displayed as  //[[image:1658135500498-725.png||height="23" width="22"]]// Indicates that Cellular is the backup WAN.//
419 +Cell icon is displayed as  [[image:1658135500498-725.png||height="23" width="22"]] Indicates that Cellular is the backup WAN.
263 263  
264 264  
265 265  [[image:image-20220606141113-7.png||height="678" width="1106"]]
266 266  
267 267  
268 -//**Close the WiFi WAN, the gateway will switch to a Cellular network.**//
425 +**Close the WiFi WAN, the gateway will switch to a Cellular network.**
269 269  
270 270  [[image:image-20220606140932-5.png||height="687" width="1107"]]
271 271  
272 272  
430 +== 4.3 At the same time start Cellular and Ethernet and Wi-Fi networks ==
273 273  
274 -== **4.3 At the same time start Cellular and Ethernet and Wi-Fi networks** ==
275 275  
276 -
277 277  [[image:image-20220606140328-1.png||height="682" width="1108"]]
278 278  
279 -
280 280  
281 281  )))
282 282  
283 -= **5. How does the gateway view the International Mobile Equipment Identity (IMEI)** =
438 += 5. How does the gateway view the International Mobile Equipment Identity (IMEI) =
284 284  
440 +== For LIG16,LPS8, LPS8N, LG308, LG308N, DLOS8, DLOS8N view the International Mobile Equipment Identity (IMEI) ==
285 285  
442 +
286 286  Users can get the IMEI via Linux command, but you have to access the gateway CLI.
287 287  
288 288  (% class="box infomessage" %)
289 289  (((
290 -**root@dragino-1b7c4c:~~# comgt -d /dev/ttyModemAT -s /etc/gcom/getimsi.gcom **
447 +**root@dragino-24b3c8:~~# comgt -d /dev/ttyModemAT -s /etc/gcom/getimei.gcom **
291 291  )))
292 292  
293 -[[image:image-20221027140604-1.png||height="330" width="707"]]
450 +[[image:image-20231218095203-4.png]]
294 294  
295 295  
296 -[[image:image-20221027151146-2.png||height="554" width="1000"]]
453 +[[image:image-20231218095426-6.jpeg||height="466" width="990"]]
297 297  
298 298  
299 -== **How does the gateway access the Quetel module directly (to send AT commands)** ==
456 +== For LPS8v2 view the International Mobile Equipment Identity (IMEI) ==
300 300  
458 +(% class="box infomessage" %)
459 +(((
460 +**root@dragino-e4e891:~~# /usr/local/dragino/cell/getinfo.sh**
461 +)))
301 301  
302 -//Users can access the gateway CLI and run the minicom command to get the configuration interface.//
463 +[[image:image-20231218094526-1.png]]
303 303  
465 +
466 +[[image:image-20231218094741-3.png]]
467 +
468 +
469 +== How does the gateway access the Quetel module directly (to send AT commands) ==
470 +
471 +
472 +Users can access the gateway CLI and run the minicom command to get the configuration interface.
473 +
304 304  (((
305 305  
306 306  
307 -**//Enter the minicom command, then select the option ''serial port setup".//**
477 +**Enter the minicom command, then select the option ''serial port setup".**
308 308  )))
309 309  
310 310  (% class="box infomessage" %)
... ... @@ -325,20 +325,20 @@
325 325  )))
326 326  
327 327  
328 -(% style="color:red" %)//**Note: Enter the corresponding letter to change the configuration, like A,B,C**//
498 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
329 329  
330 330  [[image:image-20220527154154-7.png]]
331 331  
332 332  
333 -=== **International Mobile Equipment Identity (IMEI)** ===
503 +== International Mobile Equipment Identity (IMEI) ==
334 334  
335 335  
336 336  (((
337 -//Enter (% style="color:blue" %)**AT+GSN **(%%)in the interface to get the IMEI,//
507 +Enter (% style="color:blue" %)**AT+GSN **(%%)in the interface to get the IMEI,
338 338  )))
339 339  
340 340  (((
341 -//**For example: (% style="color:#037691" %)860548042566627(%%)**//
511 +**For example: (% style="color:#037691" %)860548042566627(%%)**
342 342  )))
343 343  
344 344  (% class="box infomessage" %)
... ... @@ -351,15 +351,15 @@
351 351  [[image:image-20220527154231-8.png]]
352 352  
353 353  
354 -=== **Integrated Circuit Card Identifier (ICCID)** ===
524 +== Integrated Circuit Card Identifier (ICCID) ==
355 355  
356 356  
357 357  (((
358 -//Enter (% style="color:blue" %)**AT+QCCID **(%%)in the interface to get the ICCID,//
528 +Enter (% style="color:blue" %)**AT+QCCID **(%%)in the interface to get the ICCID,
359 359  )))
360 360  
361 361  (((
362 -//**For example: (% style="color:#037691" %)89860118005400261748(%%)**//
532 +**For example: (% style="color:#037691" %)89860118005400261748(%%)**
363 363  
364 364  (% class="box infomessage" %)
365 365  (((
... ... @@ -369,40 +369,39 @@
369 369  
370 370  [[image:1678675878256-777.png]]
371 371  
372 -= **6. How does the gateway connect to the network via a USB 4G Dongle** =
373 373  
543 += 6. How does the gateway connect to the network via a USB 4G Dongle =
374 374  
375 -== **6.1 Introduction** ==
545 +== 6.1 Introduction ==
376 376  
377 377  
378 -(% style="color:red" %)**//Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware//**
548 +(% style="color:red" %)**Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware**
379 379  
380 380  (((
381 -//This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.//
551 +This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.
382 382  
383 383  
384 384  )))
385 385  
386 386  (((
387 -//Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.//
557 +Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.
388 388  )))
389 389  
390 390  (((
391 -//This is not beginner-friendly due to too many protocols.//
561 +This is not beginner-friendly due to too many protocols.
392 392  
393 -//For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]//
563 +For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]
394 394  
395 -
396 396  
397 397  )))
398 398  
399 -== **6.2 How to use the USB Dongle at the gateway** ==
568 +== 6.2 How to use the USB Dongle at the gateway ==
400 400  
401 401  
402 -//Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.//
571 +Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.
403 403  
404 404  (((
405 -//For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.//
574 +For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.
406 406  )))
407 407  
408 408  (% class="box" %)
... ... @@ -416,38 +416,35 @@
416 416  )))
417 417  
418 418  
588 +== 6.3 Hilink mode ==
419 419  
420 -== **6.3 Hilink mode** ==
421 421  
422 -
423 423  //Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
424 424  
425 425  
594 +=== 6.3.1 Plugs into the device ===
426 426  
427 -=== **6.3.1 Plugs into the device** ===
428 428  
429 -
430 430  (((
431 -//USB-Dongle plugs into the gateway USB port//
598 +USB-Dongle plugs into the gateway USB port
432 432  )))
433 433  
434 434  (((
435 -//Check the USB module via command (% style="color:#037691" %)**lsusb**//
602 +Check the USB module via command (% style="color:#037691" %)**lsusb**
436 436  )))
437 437  
438 438  (((
439 -(% style="color:red" %)//**Note: Users need to that connect to the gateway command line via ssh.**//
606 +(% style="color:red" %)**Note: Users need to that connect to the gateway command line via ssh.**
440 440  )))
441 441  
442 442  [[image:image-20220527154739-9.png]]
443 443  
444 444  
612 +=== 6.3.2 Detection of new network interfaces added ===
445 445  
446 -=== **6.3.2 Detection of new network interfaces added** ===
447 447  
615 +Check network configuration command line input:
448 448  
449 -//Check network configuration command line input: //
450 -
451 451  (% class="box infomessage" %)
452 452  (((
453 453  (((
... ... @@ -457,15 +457,14 @@
457 457  
458 458  [[image:image-20220527154822-10.png]]
459 459  
460 -//In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**//
626 +In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**
461 461  
462 -//Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**//
628 +Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**
463 463  
464 464  
631 +=== 6.3.3 Add the new interface to the network configuration. ===
465 465  
466 -=== **6.3.3 Add the new interface to the network configuration.** ===
467 467  
468 -
469 469  //Enter the configuration from the command line~://
470 470  
471 471  (% class="box" %)
... ... @@ -488,64 +488,68 @@
488 488  
489 489  [[image:image-20220527155013-12.png]]
490 490  
491 -//Now, Gateway is configured to access the internet on the LTE network.//
656 +Now, Gateway is configured to access the internet on the LTE network.
492 492  
493 493  
659 +== 6.4 NCM mode ==
494 494  
495 -== **6.4 NCM mode** ==
496 496  
662 +== 6.5 Troubleshooting ==
497 497  
498 -== **6.5 Troubleshooting** ==
664 +=== 6.5.1 The USB-Dongle interface cannot obtain the IP address. ===
499 499  
500 500  
501 -=== **6.5.1 The USB-Dongle interface cannot obtain the IP address.** ===
667 +Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.
502 502  
503 503  
504 -//Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.//
670 += 7. How to reduce data traffic =
505 505  
672 +== 7.1 How the gateway will consume data traffic ==
506 506  
507 507  
508 -= **7. How to reduce data traffic** =
675 +Below list the place where the data traffic will use.
509 509  
677 +* Valid uplink data to LoRaWAN server or IoT server. ( We can't reduce this as they are the data we want)
678 +* Invalid uplink sensor data to LoRaWAN serevr. ( See Filter unwanted packets)
679 +* LoRaWAN Status push or polling data to LoRaWAN server . ( We can reduce this part , see below for discussion)
680 +* System Keep Alive data. ( To ensure the system is more robust, can be disabled)
681 +* system Time synchronization Checking
682 +* Auto update ( Software auto update, can be disabled)
510 510  
511 -== **7.1 Reduce Status Uplink Interval** ==
684 +=== 7.1.1 Uploading backup files to reduced data consumption ===
512 512  
513 513  
514 -**//The gateways will use the data traffic below two places.//**
687 +Users can upload this backup file to reduce data consumption in **System~-~->Back Up/Restore Config**, Download link for backup file: **[[attach:Reduced_data_consumption.tar.gz||target="_blank"]]**
515 515  
689 +[[image:image-20240712093532-1.png]]
516 516  
517 -//1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.//
518 518  
519 -//For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.//
692 +=== 7.1.2 Auto update ===
520 520  
521 -[[image:image-20220527155108-13.png]]
522 522  
695 +Gateway will check for update every day for new configure or software. User can disable them by below method.
523 523  
524 524  
525 -//2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.//
698 +=== 7.1.3 Filter unwanted packets ===
526 526  
527 -//For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.//
528 528  
529 -[[image:image-20220527155358-16.png]]
701 +When gateway connect to LoRaWAN server via LoRaWAN protocol , Gateway will by default get every possible LoRaWAN packets and forward to LoRaWAN server. If there are sensors from others in the same area, such sensor data will also be forward to LoRaWAN server ( they will be ignore by the server). This also consume data.
530 530  
531 -//System General interface//
703 +See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
532 532  
533 533  
534 -[[image:image-20220527155229-15.png]]
706 +== 7.2 Usage statistics ==
535 535  
536 -//Keepalive script interval time settings//
708 +=== 7.2.1 How does Openwrt usage statistics ===
537 537  
538 538  
711 +This is a general instruction for the use of Openwrt of Dragino devices. Current models include:
539 539  
540 -== **7.2 Filter unwanted packets** ==
713 +* LPS8,LPS8N
714 +* LG308,LG308N
715 +* DLOS8,DLOS8N
716 +* LIG16
541 541  
542 -
543 -See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
544 -
545 -
546 -== **7.3 Usage statistics** ==
547 -
548 -
549 549  ~1. Activate LuCI and connect to SSH following [[these instructions>>doc:Main.Install Luci in the new UI firmware.WebHome]]
550 550  
551 551  2. Install luci-app-statistics using the following terminal commands:
... ... @@ -563,6 +563,7 @@
563 563  
564 564  [[image:image-20221124135102-2.png]]
565 565  
735 +
566 566  4. View the graphs and statistics using by going to **Statistics > Graphs** **> Interfaces > 3g-cellullar**
567 567  
568 568  [[image:image-20221124134927-1.png]]
Reduced_data_consumption.tar.gz
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +10.4 KB
Content
image-20231218094526-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +23.3 KB
Content
image-20231218094728-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +38.2 KB
Content
image-20231218094741-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.5 KB
Content
image-20231218095203-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +18.5 KB
Content
image-20231218095257-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +73.0 KB
Content
image-20231218095426-6.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +53.7 KB
Content
image-20240712093532-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +145.5 KB
Content
image-20241205150916-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0