Last modified by Xiaoling on 2024/08/08 09:05
<
From version < 70.1 >
edited by Kilight Cao
on 2022/07/18 17:11
To version < 12.1 >
edited by Kilight Cao
on 2022/05/25 14:15
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,84 +1,68 @@
1 -**Table of Contents：**
1 +Table of Contents：
2 2  
3 3  {{toc/}}
4 4  
5 += 1. Enable Cellular Connection =
5 5  
7 +If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.
6 6  
7 -= **1. Enable Cellular Connection** =
9 +[[image:https://wiki.dragino.com/images/thumb/8/81/Cellular_11.png/600px-Cellular_11.png||height="262" width="600"]]
8 8  
11 +Enable Cellular Connection
9 9  
10 -//If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.//
11 -
12 -[[image:image-20220601110850-2.png]]
13 -
14 -**//Enable Cellular Connection//**
15 -
16 -
17 17  (((
18 -//If your device doesn't have a cellular module, you will see a cellular module not detected.//
14 +If your device doesn't have a cellular module, you will see a cellular module not detected.
19 19  )))
20 20  
21 -[[image:image-20220527153544-2.png]]
17 +[[image:https://wiki.dragino.com/images/thumb/d/da/Cellular_10.png/600px-Cellular_10.png||height="400" width="600"]]
22 22  
19 +No Cellular Module
23 23  
24 -= **2. How to Debug if Cellular connection fails** =
21 += 2. How to Debug if Cellular connection fail =
25 25  
23 +If there is a problem with cellular connection. Please check the below points:
26 26  
27 -//If there is a problem with the cellular connection. Please check the below points~://
25 +== 2.1 Do you order the model with a cellular option ==
28 28  
27 +Make sure you order the model with the cellular option. Can check by command or via the Web UI.
29 29  
30 -== **2.1 Do you order the model with a cellular option** ==
31 -
32 -
33 -//Make sure you order the model with the cellular option. Can check by command or via the Web UI.//
34 -
35 35  (% class="box" %)
36 36  (((
37 -//root@dragino-1bbd90:~~# lsusb
31 +root@dragino-1bbd90:~~# lsusb
38 38  Bus 001 Device 004: ID 2c7c:0125      ~-~-> This is the Cellular module
39 39  Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
40 -Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub//
34 +Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
41 41  )))
42 42  
43 -[[image:image-20220601110748-1.png]]
37 +(% class="wikigeneratedid" %)
38 +[[image:image-20220525140054-1.png||height="153" width="607"]]
44 44  
40 +== 2.2 Do you input the SIM card correctly ==
45 45  
46 -== **2.2 Do you input the SIM card correctly** ==
42 +Below command can check if you have a SIM card inserted, or via Web UI
47 47  
44 +* Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on
45 +* Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.
48 48  
49 -**//Below command can check if you have a SIM card inserted, or via Web UI//**
50 -
51 -* //Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on//
52 -* //Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.//
53 -
54 54  (% class="box" %)
55 55  (((
56 -//root@dragino-1dadd8:~~# **comgt -d /dev/ttyUSB3**
49 +root@dragino-1dadd8:~~# comgt -d /dev/ttyUSB3
57 57  SIM ready
58 58  Waiting for Registration..(120 sec max)
59 59  Registered on Home network: "CHN-UNICOM",7
60 -Signal Quality: 10,99//
53 +Signal Quality: 10,99
61 61  )))
62 62  
63 -
64 64  (% class="wikigeneratedid" %)
65 -[[image:image-20220527153804-4.png]]
57 +When the IP address is displayed and the Internet displays "OK", it works properly.
66 66  
67 -
68 68  (% class="wikigeneratedid" %)
69 -//**Note:** If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.//
60 +[[image:image-20220525141016-3.png||height="524" width="502"]]
70 70  
71 -(% class="wikigeneratedid" %)
72 -//Please check the IP address is displayed and the Internet displays "OK", it works properly.//
62 +== 2.3 Check dialing info ==
73 73  
74 -(% class="wikigeneratedid" %)
75 -[[image:image-20220527153827-5.png]]
64 +run "logread -f" in console
76 76  
77 -
78 -== **2.3 Check dialing info** ==
79 -
80 -//run "**logread -f**" in gateway CLI。//
81 -
82 82  (% class="box" %)
83 83  (((
84 84  Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
... ... @@ -108,8 +108,8 @@
108 108  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: AT+CGDCONT=1,"IP",""^M^M
109 109  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: OK
110 110  Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
111 -(% style="color:#037691" %)**Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
112 -Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator**(%%)
95 +(% style="color:#037691" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
96 +Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator(%%)
113 113  (% style="color:black" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (CONNECT)
114 114  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
115 115  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ATD*99#^M^M
... ... @@ -119,55 +119,19 @@
119 119  Fri Feb  7 01:20:30 2020 daemon.info pppd[29452]: Serial connection established.
120 120  )))
121 121  
106 += 3. Share Cellular Network for WiFi & LAN clients =
122 122  
123 -== **2.4 If the following situation occurs, how can users solve this problem?** ==
108 +(((
109 +By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.
110 +)))
124 124  
125 -
126 -=== **2.4.1 The gateway can read the SIM card, But the Internet is displayed as Fail.** ===
127 -
128 -
129 -//Users can check whether the APN matched by the SIM card is correct.//
130 -
131 -//Regarding what APN your SIM card should use, Users can search for the APN corresponding to the SIM card by Google or ask the carrier.//
132 -
133 -[[image:image-20220718155937-1.png||height="562" width="497"]]
134 -
135 -
136 -=== **2.4.2 The gateway can read the SIM card, But the Internet is displayed as Fail, and at the same time Network displays the carrier network.** ===
137 -
138 -
139 -//It should be SIM card no flow, users can insert SIM cards into the mobile phone for testing.//
140 -
141 -[[image:1658131428288-728.png||height="538" width="494"]]
142 -
143 -
144 -=== **2.4.3 The gateway can't read the SIM card, and the Internet is displayed as Fail.** ===
145 -
146 -
147 -//Users need to check whether the SIM card type is suitable for the EC25 module.//
148 -
149 -[[image:1658131612484-845.png||height="549" width="499"]]
150 -
151 -
152 -=== **2.4.4 SIM display：~*~**SIM ERROR~*~** Check SIM is inserted test SIM in a mobile phone？** ===
153 -
154 -
155 -//Users can insert SIM cards into the mobile phone for testing.//
156 -
157 -[[image:image-20220718160804-3.png||height="602" width="500"]]
158 -
159 -= **3. Share Cellular Network for WiFi & LAN clients** =
160 -
161 -
162 162  (((
163 -//By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.//
113 +root@dragino-1d25dc:~~# cat /etc/config/firewall
164 164  )))
165 165  
166 166  (% class="box" %)
167 167  (((
168 168  (((
169 -root@dragino-1d25dc:~~# cat /etc/config/firewall
170 -
171 171  config defaults
172 172   option syn_flood '1'
173 173   option input 'ACCEPT'
... ... @@ -197,74 +197,15 @@
197 197  )))
198 198  
199 199  (((
200 -//and run **/etc/init.d/firewall reload** or reboot the device.//
201 -
202 -
203 -
204 -= **4. Switching between Cellular and Ethernet and Wi-Fi networks** =
205 -
206 -
207 -//By default, Cell is the backup WAN where the Ethernet or Wi-Fi network is used first if they are available.//
208 -
209 -//Once the Ethernet of the Wi-Fi network is unavailable where the gateway network will switch to a Cell network from Ethernet or Wi-Fi.//
210 -
211 -
212 -
213 -**Enable Cellular and connect Ethernet at the same time**
214 -
215 -ETH icon is displayed as ​​​[[image:1652436675869-206.png||height="26" width="28"]] Indicates that Ethernet is the main working network.
216 -
217 -Cell icon is displayed as  ​​​​​​​[[image:1652436705761-420.png||height="27" width="27"]] Indicates that Cellular is the backup WAN.
218 -
219 -
220 -== **4.1 Switching between Cellular and Ethernet networks** ==
221 -
222 -
223 -//When connecting to the AP WiFI of the gateway, users can access the Web UI of the gateway through the default address 10.130.1.1//
224 -
225 -[[image:image-20220606140622-2.png||height="664" width="1106"]]
226 -
227 -
228 -//**Remove the network cable from the WAN port on the gateway, the gateway will switch to a Cellular network.**//
229 -
230 -[[image:image-20220606140859-4.png||height="687" width="1107"]]
231 -
232 -
233 -== **4.2 Switching between Cellular and WiFi networks** ==
234 -
235 -
236 -(% class="wikigeneratedid" %)
237 -//Enable **Cellular** and connect **WiFi** at the same time//
238 -
239 -//WiFi icon is displayed as ​​​//[[image:http://wiki1.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png" height="28" width="30"]]// Indicates that WiFi is the main working network.//
240 -
241 -//Cell icon is displayed as  //[[image:http://wiki1.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png" height="30" width="30"]]// Indicates that Cellular is the backup WAN.//
242 -
243 -[[image:image-20220606141113-7.png||height="678" width="1106"]]
244 -
245 -
246 -//**Close the WiFi WAN, the gateway will switch to a Cellular network.**//
247 -
248 -[[image:image-20220606140932-5.png||height="687" width="1107"]]
249 -
250 -
251 -== **4.3 At the same time start Cellular and Ethernet and Wi-Fi networks** ==
252 -
253 -
254 -[[image:image-20220606140328-1.png||height="682" width="1108"]]
255 -
256 -
148 +and run **/etc/init.d/firewall reload** or reboot the device.
257 257  )))
258 258  
259 -= **5. How does the gateway view the International Mobile Equipment Identity (IMEI)** =
151 += 4. How does the gateway view the International Mobile Equipment Identity (IMEI) =
260 260  
153 +Use SSH to access the gateway configuration page and run the minicom command
261 261  
262 -//Users can access the gateway CLI and run the minicom command to get the configuration interface.//
263 -
264 264  (((
265 -
266 -
267 -**//Enter the minicom command, then select the option ''serial port setup".//**
156 +Select "**Serial Port Setup**":
268 268  )))
269 269  
270 270  (% class="box infomessage" %)
... ... @@ -272,132 +272,112 @@
272 272  root@dragino-1ef9ac:~~# minicom -s
273 273  )))
274 274  
275 -[[image:image-20220527154132-6.png]]
164 +[[image:https://wiki.dragino.com/images/thumb/0/05/4G-1.png/400px-4G-1.png||height="265" width="400"]]
276 276  
166 +Enter the minicom command
277 277  
278 -And then, change the setting:
168 +Access the serial port of the 4G module
279 279  
280 -(% class="box infomessage" %)
281 -(((
282 -(% style="color:black" %)**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
170 +Serial port setup is as follows:
283 283  
284 -(% style="color:black" %)**Bps/Par/Bits :**(% style="color:#037691" %)** 9600 8N1**
285 -)))
172 +**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
286 286  
174 +**Bps/Par/Bits :(% style="color:#037691" %) 9600 8N1 or 115200 8N1(%%)**
287 287  
288 -//**Note: Enter the corresponding letter to change the configuration, like A,B,C**//
176 +[[image:https://wiki.dragino.com/images/thumb/c/cb/EC25_1.png/400px-EC25_1.png||height="164" width="400"]]
289 289  
290 -[[image:image-20220527154154-7.png]]
178 +Configuring USB Ports
291 291  
292 292  
293 -//Enter **AT+GSN **in the interface to get the IMEI,//
181 +Enter AT+GSN in the serial port to view the IMEI
294 294  
295 -// **For example (% style="color:#037691" %)860548042566627(%%)**//
183 +For example:** (% style="color:#037691" %)860548042566627(%%)**
296 296  
297 297  (% class="box infomessage" %)
298 298  (((
299 299  (((
300 - **AT+GSN**
188 + AT+GSN
301 301  )))
302 302  )))
303 303  
304 -[[image:image-20220527154231-8.png]]
192 +[[image:https://wiki.dragino.com/images/thumb/6/66/4G-3.png/400px-4G-3.png||height="286" width="400"]]
305 305  
194 +Enter the AT command
306 306  
307 -= **6. How does the gateway connect to the network via a USB 4G Dongle** =
196 += 5. How does the gateway connect to the network via a USB 4G Dongle =
308 308  
198 +== 5.1 Introduction ==
309 309  
310 -== **6.1 Introduction** ==
200 +(% style="color:red" %)**Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware**
311 311  
312 -
313 -(% style="color:red" %)**//Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware//**
314 -
315 315  (((
316 -//This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.//
317 -
318 -
203 +This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.
319 319  )))
320 320  
321 321  (((
322 -//Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.//
207 +Many mode (and most **LTE**) usb modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended. For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]
323 323  )))
324 324  
325 325  (((
326 -//This is not beginner-friendly due to too many protocols.//
327 -
328 -//For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]//
329 -
330 -
211 +This is not beginner-friendly due to too many protocols.
331 331  )))
332 332  
333 -== **6.2 How to use the USB Dongle at the gateway** ==
214 +== 5.2 How to use the USB-Dongle at the gateway ==
334 334  
216 +Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.
335 335  
336 -//Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.//
337 -
338 338  (((
339 -//For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.//
219 +For example, the Huawei-E3372/E8372 is using Hilink mode or NCM mode.
340 340  )))
341 341  
342 342  (% class="box" %)
343 343  (((
344 344   Huawei-E3372/E8372
345 - Check the (% style="color:#037691" %)**E3372**(% style="color:black" %) version to determine the mode.
225 + Check (% style="color:#037691" %)**E3372**(% style="color:black" %) version to determine the mode.
346 346   The version numbers starting with 21 is NCM mode
347 347   The version numbers starting with 22 is Hilink mode
348 - The E8372 only has Hilink mode
349 -**~ **(% style="color:red" %)**Note： The e3372 in the vast majority of cases is Hilink mode**
228 + The E8372 only have Hilink mode
229 +**~ **(% style="color:red" %)**Note：The e3372 in the vast majority of cases is Hilink mode**
350 350  )))
351 351  
232 +== 5.3 Hilink mode ==
352 352  
353 -== **6.3 Hilink mode** ==
234 +Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]
354 354  
236 +=== 5.3.1 1.Plugs into the device ===
355 355  
356 -//Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
357 -
358 -
359 -=== **6.3.1 Plugs into the device** ===
360 -
361 -
362 362  (((
363 -//USB-Dongle plugs into the gateway USB port//
239 +USB-Dongle plugs into the gateway USB port
364 364  )))
365 365  
366 366  (((
367 -//Check the USB module via command (% style="color:#037691" %)**lsusb**//
243 +Check the USB module via comman (% style="color:#037691" %)**lsusb**
368 368  )))
369 369  
370 370  (((
371 -(% style="color:red" %)//**Note: Users need to that connect to the gateway command line via ssh.**//
247 +(% style="color:red" %)**Note : User neet to do that connect gateway command line via ssh.**
372 372  )))
373 373  
374 -[[image:image-20220527154739-9.png]]
250 +[[image:https://wiki.dragino.com/images/2/25/Usb-4g.png||height="63" width="554"]]
375 375  
252 +Checking USB Ports
376 376  
377 -=== **6.3.2 Detection of new network interfaces added** ===
254 +=== 5.3.2 2.Detection of new network interfaces added ===
378 378  
256 +Command line input: (% style="color:#037691" %)**ifconfig -a**
379 379  
380 -//Check network configuration command line input: //
258 +[[image:https://wiki.dragino.com/images/thumb/a/a0/Usb-4g-1.png/400px-Usb-4g-1.png||height="401" width="400"]]
381 381  
382 -(% class="box infomessage" %)
383 -(((
384 -(((
385 - root@dragino-1ef9ac:~~# ifconfig -a
386 -)))
387 -)))
260 +Check the network
388 388  
389 -[[image:image-20220527154822-10.png]]
262 +In the command output user can see that the new interface added is (% style="color:#037691" %)**eth2**
390 390  
391 -//In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**//
264 +Usually,user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**
392 392  
393 -//Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**//
266 +=== 5.3.3 3.Add the new interface to the network confiutation. ===
394 394  
268 +Enter the configuration from the command line:
395 395  
396 -=== **6.3.3 Add the new interface to the network configuration.** ===
397 -
398 -
399 -//Enter the configuration from the command line~://
400 -
401 401  (% class="box" %)
402 402  (((
403 403  uci set network.lte=interface
... ... @@ -409,62 +409,52 @@
409 409  /etc/init.d/network restart
410 410  )))
411 411  
412 -[[image:image-20220527154937-11.png]]
281 +[[~[~[image:https://wiki.dragino.com/images/thumb/7/73/Usb-4g-4.png/600px-Usb-4g-4.png~|~|height="116" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-4.png]]
413 413  
283 +Configuration
414 414  
415 -//**Checking Network Configurations**//
285 +Checking Network Configurations
416 416  
417 -//Command-line input: (% style="color:#037691" %)**ifconfig**//
287 +Command line input: (% style="color:#037691" %)**ifconfig**
418 418  
419 -[[image:image-20220527155013-12.png]]
289 +[[~[~[image:https://wiki.dragino.com/images/b/b8/Usb-4g-3.png~|~|height="514" width="554"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-3.png]]
420 420  
421 -//Now, Gateway is configured to access the internet on the LTE network.//
291 +Checking Network Configurations
422 422  
293 +Now, Gateway is configured to access the internet on the Lte network.
423 423  
424 -== **6.4 NCM mode** ==
295 +== 5.4 NCM mode ==
425 425  
297 +== 5.5 Troubleshooting ==
426 426  
427 -== **6.5 Troubleshooting** ==
299 +=== 5.5.1 The USB-Dongle interface cannot obtain the IP address. ===
428 428  
301 +Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.
429 429  
430 -=== **6.5.1 The USB-Dongle interface cannot obtain the IP address.** ===
303 += 6. How to reduce data traffic =
431 431  
305 +== 6.1 Introduce ==
432 432  
433 -//Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.//
307 +The gateways will use the data traffic were below two places.
434 434  
309 +~1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.
435 435  
436 -= **7. How to reduce data traffic** =
311 +For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.
437 437  
313 +[[image:https://wiki.dragino.com/images/thumb/b/bc/LoRa_interval_time_setting.png/600px-LoRa_interval_time_setting.png||height="282" width="600"]]
438 438  
439 -== **7.1 Reduce Status Uplink Interval** ==
315 +LoRa interval time setting
440 440  
317 +2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.
441 441  
442 -**//The gateways will use the data traffic below two places.//**
319 +For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.
443 443  
321 +[[image:https://wiki.dragino.com/images/thumb/4/49/Systrm_General.png/600px-Systrm_General.png||height="319" width="600"]]
444 444  
445 -//1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.//
323 +Systrm General
446 446  
447 -//For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.//
325 +[[image:https://wiki.dragino.com/images/thumb/f/f0/Set_time_interval.png/600px-Set_time_interval.png||height="319" width="600"]]
448 448  
449 -[[image:image-20220527155108-13.png]]
327 +Keepalive script interval time settings
450 450  
451 -
452 -//2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.//
453 -
454 -//For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.//
455 -
456 -[[image:image-20220527155358-16.png]]
457 -
458 -//System General interface//
459 -
460 -
461 -[[image:image-20220527155229-15.png]]
462 -
463 -//Keepalive script interval time settings//
464 -
465 -
466 -== **7.2 Filter unwanted packets** ==
467 -
468 -See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
469 -
470 470  
1654496261722-617.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
1658131428288-728.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -258.9 KB
Content
1658131612484-845.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -226.9 KB
Content
1658135500498-725.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1658135509571-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1658135519305-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220526104201-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -168.6 KB
Content
image-20220527153337-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220527153544-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -21.4 KB
Content
image-20220527153729-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -19.8 KB
Content
image-20220527153804-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.9 KB
Content
image-20220527153827-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20220527154132-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -75.9 KB
Content
image-20220527154154-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.4 KB
Content
image-20220527154231-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -48.8 KB
Content
image-20220527154739-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20220527154822-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -292.7 KB
Content
image-20220527154937-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -17.6 KB
Content
image-20220527155013-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -284.2 KB
Content
image-20220527155108-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.7 KB
Content
image-20220527155146-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.4 KB
Content
image-20220527155229-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.0 KB
Content
image-20220527155358-16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.1 KB
Content
image-20220601110748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.2 KB
Content
image-20220601110850-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content
image-20220606140328-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -457.3 KB
Content
image-20220606140622-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -445.3 KB
Content
image-20220606140859-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -439.5 KB
Content
image-20220606140932-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -439.5 KB
Content
image-20220606141113-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -457.3 KB
Content
image-20220718155937-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -162.3 KB
Content
image-20220718160209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -180.4 KB
Content
image-20220718160804-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -173.5 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0