Skip to Content
Last modified by Kilight Cao on 2025/05/06 13:38
From version 42.3
edited by Xiaoling
on 2022/06/01 11:09
Change comment: There is no comment for this version
To version 1.4
edited by Xiaoling
on 2022/05/14 09:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,83 +1,54 @@
1 -**Table of Contents：**
1 +Table of Contents：
2 2  
3 3  {{toc/}}
4 4  
5 += 1. Enable Cellular Connection =
5 5  
7 +If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.
6 6  
7 -= **1. Enable Cellular Connection** =
9 +[[image:https://wiki.dragino.com/images/thumb/8/81/Cellular_11.png/600px-Cellular_11.png||height="262" width="600"]]
8 8  
11 +Enable Cellular Connection
9 9  
10 -//If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.//
13 +If your device doesn't have a cellular module, you will see a cellular module not detected.
11 11  
12 -[[image:image-20220601110850-2.png]]
15 +[[image:https://wiki.dragino.com/images/thumb/d/da/Cellular_10.png/600px-Cellular_10.png||height="400" width="600"]]
13 13  
14 -**//Enable Cellular Connection//**
17 +No Cellular Module
15 15  
16 -(((
17 -//If your device doesn't have a cellular module, you will see a cellular module not detected.//
18 -)))
19 += 2. How to Debug if Cellular connection fail =
19 19  
20 -[[image:image-20220527153544-2.png]]
21 +If there is a problem for cellular connection. Please check the below points:
21 21  
23 +== 2.1 Do you order the model with cellular option ==
22 22  
23 -= **2. How to Debug if Cellular connection fails** =
25 +Make sure you order the model with the cellular option. Can check by command:
24 24  
25 -
26 -//If there is a problem with the cellular connection. Please check the below points~://
27 -
28 -
29 -== **2.1 Do you order the model with a cellular option** ==
30 -
31 -
32 -//Make sure you order the model with the cellular option. Can check by command or via the Web UI.//
33 -
34 34  (% class="box" %)
35 35  (((
36 -//root@dragino-1bbd90:~~# lsusb
29 +root@dragino-1bbd90:~~# lsusb
37 37  Bus 001 Device 004: ID 2c7c:0125      ~-~-> This is the Cellular module
38 38  Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
39 -Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub//
32 +Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
40 40  )))
41 41  
42 -[[image:image-20220601110748-1.png]]
35 +== 2.2 Do you input the SIM card correctly ==
43 43  
37 +Below command can check:
44 44  
45 -== **2.2 Do you input the SIM card correctly** ==
46 -
47 -
48 -**//Below command can check if you have a SIM card inserted, or via Web UI//**
49 -
50 -* //Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on//
51 -* //Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.//
52 -
53 53  (% class="box" %)
54 54  (((
55 -//root@dragino-1dadd8:~~# **comgt -d /dev/ttyUSB3**
41 +root@dragino-1bbd90:~~# comgt -d /dev/ttyUSB3
56 56  SIM ready
57 57  Waiting for Registration..(120 sec max)
58 -Registered on Home network: "CHN-UNICOM",7
59 -Signal Quality: 10,99//
44 +Registered on Home network: "CHN-CT",7
45 +Signal Quality: 23,99
60 60  )))
61 61  
48 +== 2.3 Check dialing info ==
62 62  
63 -(% class="wikigeneratedid" %)
64 -[[image:image-20220527153804-4.png]]
50 +run "logread -f" in console
65 65  
66 -
67 -(% class="wikigeneratedid" %)
68 -//**Note:** If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.//
69 -
70 -(% class="wikigeneratedid" %)
71 -//Please check the IP address is displayed and the Internet displays "OK", it works properly.//
72 -
73 -(% class="wikigeneratedid" %)
74 -[[image:image-20220527153827-5.png]]
75 -
76 -
77 -== **2.3 Check dialing info** ==
78 -
79 -//run "**logread -f**" in gateway CLI。//
80 -
81 81  (% class="box" %)
82 82  (((
83 83  Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
... ... @@ -107,8 +107,8 @@
107 107  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: AT+CGDCONT=1,"IP",""^M^M
108 108  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: OK
109 109  Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
110 -(% style="color:#037691" %)**Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
111 -Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator**(%%)
81 +(% style="color:#037691" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
82 +(% style="color:#037691" %)Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator
112 112  (% style="color:black" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (CONNECT)
113 113  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
114 114  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ATD*99#^M^M
... ... @@ -118,20 +118,13 @@
118 118  Fri Feb  7 01:20:30 2020 daemon.info pppd[29452]: Serial connection established.
119 119  )))
120 120  
92 += 3. Share Cellular Network for WiFi & LAN clients =
121 121  
122 -= **3. Share Cellular Network for WiFi & LAN clients** =
94 +By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.
123 123  
124 -
125 -(((
126 -//By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.//
127 -)))
128 -
129 -(% class="box" %)
130 -(((
131 -(((
132 132  root@dragino-1d25dc:~~# cat /etc/config/firewall
133 133  
134 -config defaults
98 +{{{config defaults
135 135   option syn_flood '1'
136 136   option input 'ACCEPT'
137 137   option output 'ACCEPT'
... ... @@ -141,13 +141,13 @@
141 141   list network 'lan'
142 142   option input 'ACCEPT'
143 143   option output 'ACCEPT'
144 - option forward 'REJECT' 
108 + option forward 'REJECT'
145 145  config zone
146 146   option name 'wan'
147 147   list network 'wan'
148 148   list network 'wwan'
149 149   list network 'wan6'
150 - list network 'cellular'   ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--> Add this line and reboot
114 + list network 'cellular' -----------------> Add this line and reboot
151 151   option input 'REJECT'
152 152   option output 'ACCEPT'
153 153   option forward 'ACCEPT'
... ... @@ -156,219 +156,165 @@
156 156  config forwarding
157 157   option src 'lan'
158 158   option dest 'wan'
159 -)))
160 -)))
123 +}}}
161 161  
162 -(((
163 -//and run **/etc/init.d/firewall reload** or reboot the device.//
125 +and run **/etc/init.d/firewall reload** or reboot the device.
164 164  
165 -
166 -)))
127 += 4. How does the gateway view the International Mobile Equipment Identity (IMEI) =
167 167  
168 -= **4. How does the gateway view the International Mobile Equipment Identity (IMEI)** =
129 +Use SSH to access the gateway configuration page and run the minicom command
169 169  
131 +Select "**Serial Port Setup**":
170 170  
171 -//Users can access the gateway CLI and run the minicom command to get the configuration interface.//
133 +{{{root@dragino-1ef9ac:~# minicom -s
134 +}}}
172 172  
173 -(((
174 -
136 +[[image:https://wiki.dragino.com/images/thumb/0/05/4G-1.png/400px-4G-1.png||height="265" width="400"]]
175 175  
176 -**//Enter the minicom command, then select the option ''serial port setup".//**
177 -)))
138 +Enter the minicom command
178 178  
179 -(% class="box infomessage" %)
180 -(((
181 -root@dragino-1ef9ac:~~# minicom -s
182 -)))
183 183  
184 -[[image:image-20220527154132-6.png]]
141 +Access the serial port of the 4G module
185 185  
143 +Serial port setup is as follows:
186 186  
187 -And then, change the setting:
145 +**Serial Device :** /dev/ttyModemAT
188 188  
189 -(% class="box infomessage" %)
190 -(((
191 -(% style="color:black" %)**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
147 +**Bps/Par/Bits :** 9600 8N1 or 115200 8N1
192 192  
193 -(% style="color:black" %)**Bps/Par/Bits :**(% style="color:#037691" %)** 9600 8N1**
194 -)))
149 +[[image:https://wiki.dragino.com/images/thumb/c/cb/EC25_1.png/400px-EC25_1.png||height="164" width="400"]]
195 195  
151 +Configuring USB Ports
196 196  
197 -//**Note: Enter the corresponding letter to change the configuration, like A,B,C**//
198 198  
199 -[[image:image-20220527154154-7.png]]
154 +Enter AT+GSN in the serial port to view the IMEI
200 200  
156 +For example: 860548042566627
201 201  
202 -//Enter **AT+GSN **in the interface to get the IMEI,//
158 +{{{AT+GSN
159 +}}}
203 203  
204 -// **For example (% style="color:#037691" %)860548042566627(%%)**//
161 +[[image:https://wiki.dragino.com/images/thumb/6/66/4G-3.png/400px-4G-3.png||height="286" width="400"]]
205 205  
206 -(% class="box infomessage" %)
207 -(((
208 -(((
209 - **AT+GSN**
210 -)))
211 -)))
163 +Enter the AT command
212 212  
213 -[[image:image-20220527154231-8.png]]
214 214  
166 += 5. How does the gateway connect to the network via a USB 4G Dongle =
215 215  
216 -= **5. How does the gateway connect to the network via a USB 4G Dongle** =
168 +== 5.1 Introduction ==
217 217  
170 +Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware
218 218  
219 -== **5.1 Introduction** ==
172 +This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.
220 220  
174 +Many mode (and most **LTE**) usb modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended. For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]
221 221  
222 -(% style="color:red" %)**//Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware//**
176 +This is not beginner-friendly due to too many protocols.
223 223  
224 -(((
225 -//This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.//
226 226  
227 -
228 -)))
179 +== 5.2 How to use the USB-Dongle at the gateway ==
229 229  
230 -(((
231 -//Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.//
232 -)))
181 +Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.
233 233  
234 -(((
235 -//This is not beginner-friendly due to too many protocols.//
183 +For example, the Huawei-E3372/E8372 is using Hilink mode or NCM mode.
236 236  
237 -//For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]//
238 -
239 -
240 -)))
241 -
242 -== **5.2 How to use the USB Dongle at the gateway** ==
243 -
244 -
245 -//Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.//
246 -
247 -(((
248 -//For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.//
249 -)))
250 -
251 -(% class="box" %)
252 -(((
253 - Huawei-E3372/E8372
254 - Check the (% style="color:#037691" %)**E3372**(% style="color:black" %) version to determine the mode.
185 +{{{ Huawei-E3372/E8372
186 + Check E3372 version to determine the mode.
255 255   The version numbers starting with 21 is NCM mode
256 256   The version numbers starting with 22 is Hilink mode
257 - The E8372 only has Hilink mode
258 -**~ **(% style="color:red" %)**Note： The e3372 in the vast majority of cases is Hilink mode**
259 -)))
189 + The E8372 only have Hilink mode
190 + Note：The e3372 in the vast majority of cases is Hilink mode
191 +}}}
260 260  
193 +== 5.3 Hilink mode ==
261 261  
262 -== **5.3 Hilink mode** ==
195 +Gateway upgrade to the specified firmware:
263 263  
197 +[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]
264 264  
265 -//Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
199 +=== 5.3.1 1.Plugs into the device ===
266 266  
201 +USB-Dongle plugs into the gateway USB port
267 267  
268 -=== **5.3.1 Plugs into the device** ===
203 +Check the USB module via comman lsusb
269 269  
205 +Note : User neet to do that connect gateway command line via ssh.
270 270  
271 -(((
272 -//USB-Dongle plugs into the gateway USB port//
273 -)))
207 +[[image:https://wiki.dragino.com/images/2/25/Usb-4g.png||height="63" width="554"]]
274 274  
275 -(((
276 -//Check the USB module via command (% style="color:#037691" %)**lsusb**//
277 -)))
209 +Checking USB Ports
278 278  
279 -(((
280 -(% style="color:red" %)//**Note: Users need to that connect to the gateway command line via ssh.**//
281 -)))
211 +=== 5.3.2 2.Detection of new network interfaces added ===
282 282  
283 -[[image:image-20220527154739-9.png]]
213 +Command line input: ifconfig -a
284 284  
215 +[[image:https://wiki.dragino.com/images/thumb/a/a0/Usb-4g-1.png/400px-Usb-4g-1.png||height="401" width="400"]]
285 285  
286 -=== **5.3.2 Detection of new network interfaces added** ===
217 +Check the network
287 287  
219 +In the command output user can see that the new interface added is eth2
288 288  
289 -//Check network configuration command line input: //
221 +Usually,user can see that the new interface added is eth2 or wwan0
290 290  
291 -(% class="box infomessage" %)
292 -(((
293 -(((
294 - root@dragino-1ef9ac:~~# ifconfig -a
295 -)))
296 -)))
223 +=== 5.3.3 3.Add the new interface to the network confiutation. ===
297 297  
298 -[[image:image-20220527154822-10.png]]
225 +Enter the configuration from the command line:
299 299  
300 -//In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**//
301 -
302 -//Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**//
303 -
304 -
305 -=== **5.3.3 Add the new interface to the network configuration.** ===
306 -
307 -
308 -//Enter the configuration from the command line~://
309 -
310 -(% class="box" %)
311 -(((
312 -uci set network.lte=interface
227 +{{{uci set network.lte=interface
313 313  uci set network.lte.proto=dhcp
314 -uci set network.lte.ifname=eth2    ~-~-~-~-~-~-~-~-->#This depend on the name of the new interface gateway add
229 +uci set network.lte.ifname=eth2 --------->#This depend on the name of the new interface gateway add
315 315  uci commit network
316 316  uci set firewall.@zone[1].network="wan wwan wan6 lte"
317 317  uci commit firewall
318 318  /etc/init.d/network restart
319 -)))
234 +}}}
320 320  
321 -[[image:image-20220527154937-11.png]]
236 +[[~[~[image:https://wiki.dragino.com/images/thumb/7/73/Usb-4g-4.png/600px-Usb-4g-4.png~|~|height="116" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-4.png]]
322 322  
238 +Configuration
323 323  
324 -//**Checking Network Configurations**//
240 +Checking Network Configurations
325 325  
326 -//Command-line input: (% style="color:#037691" %)**ifconfig**//
242 +Command line input: ifconfig
327 327  
328 -[[image:image-20220527155013-12.png]]
244 +[[~[~[image:https://wiki.dragino.com/images/b/b8/Usb-4g-3.png~|~|height="514" width="554"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-3.png]]
329 329  
330 -//Now, Gateway is configured to access the internet on the LTE network.//
246 +Checking Network Configurations
331 331  
248 +Now, Gateway is configured to access the internet on the Lte network.
332 332  
333 -== **5.4 NCM mode** ==
250 +== 5.4 NCM mode ==
334 334  
252 +== 5.5 Troubleshooting ==
335 335  
336 -== **5.5 Troubleshooting** ==
254 +=== 5.5.1 The USB-Dongle interface cannot obtain the IP address. ===
337 337  
256 +Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.
338 338  
339 -=== **5.5.1 The USB-Dongle interface cannot obtain the IP address.** ===
258 += 6. How to reduce data traffic =
340 340  
260 +== 6.1 Introduce ==
341 341  
342 -//Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.//
262 +The gateways will use the data traffic were below two places.
343 343  
264 +~1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.
344 344  
345 -= **6. How to reduce data traffic** =
266 +For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.
346 346  
268 +[[image:https://wiki.dragino.com/images/thumb/b/bc/LoRa_interval_time_setting.png/600px-LoRa_interval_time_setting.png||height="282" width="600"]]
347 347  
348 -== **6.1 Introduce** ==
270 +LoRa interval time setting
349 349  
272 +2. There is the data traffic from the gateway check self-network status. by default, the gateway will check network per 15s.
350 350  
351 -**//The gateways will use the data traffic below two places.//**
274 +For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.
352 352  
276 +[[image:https://wiki.dragino.com/images/thumb/4/49/Systrm_General.png/600px-Systrm_General.png||height="319" width="600"]]
353 353  
354 -//1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.//
278 +Systrm General
355 355  
356 -//For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.//
280 +[[image:https://wiki.dragino.com/images/thumb/f/f0/Set_time_interval.png/600px-Set_time_interval.png||height="319" width="600"]]
357 357  
358 -[[image:image-20220527155108-13.png]]
282 +Keppalive script interval time settings
359 359  
360 -
361 -//2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.//
362 -
363 -//For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.//
364 -
365 -[[image:image-20220527155358-16.png]]
366 -
367 -//System General interface//
368 -
369 -
370 -[[image:image-20220527155229-15.png]]
371 -
372 -//Keepalive script interval time settings//
373 -
374 374  
image-20220525105620-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
image-20220525111605-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -7.8 KB
Content
image-20220525140054-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -32.7 KB
Content
image-20220525140930-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -147.3 KB
Content
image-20220525141016-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -99.7 KB
Content
image-20220526104201-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -168.6 KB
Content
image-20220527153337-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -25.3 KB
Content
image-20220527153544-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -21.4 KB
Content
image-20220527153729-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -19.8 KB
Content
image-20220527153804-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.9 KB
Content
image-20220527153827-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20220527154132-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -75.9 KB
Content
image-20220527154154-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.4 KB
Content
image-20220527154231-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -48.8 KB
Content
image-20220527154739-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -38.1 KB
Content
image-20220527154822-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -292.7 KB
Content
image-20220527154937-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -17.6 KB
Content
image-20220527155013-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -284.2 KB
Content
image-20220527155108-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.7 KB
Content
image-20220527155146-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.4 KB
Content
image-20220527155229-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.0 KB
Content
image-20220527155358-16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.1 KB
Content
image-20220601110748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.2 KB
Content
image-20220601110850-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -25.2 KB
Content