Last modified by Xiaoling on 2024/08/08 09:05
<
From version < 27.4 >
edited by Xiaoling
on 2022/05/27 15:40
To version < 82.3 >
edited by Xiaoling
on 2023/04/20 17:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Notes for cellular network connection
1 +Cellular network connection details and tips
Content
... ... @@ -1,3 +1,5 @@
1 +
2 +
1 1  **Table of Contents：**
2 2  
3 3  {{toc/}}
... ... @@ -4,33 +4,33 @@
4 4  
5 5  
6 6  
7 -= **1. Enable Cellular Connection** =
9 += 1. Enable Cellular Connection =
8 8  
9 9  
10 -//If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.//
12 +If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.
11 11  
12 -[[image:image-20220527153337-1.png]]
14 +[[image:image-20220601110850-2.png]]
13 13  
14 -
15 15  **//Enable Cellular Connection//**
16 16  
18 +
17 17  (((
18 -//If your device doesn't have a cellular module, you will see a cellular module not detected.//
20 +If your device doesn't have a cellular module, you will see a cellular module not detected.
19 19  )))
20 20  
21 21  [[image:image-20220527153544-2.png]]
22 22  
23 23  
24 -= **2. How to Debug if Cellular connection fails** =
26 += 2. How to Debug if Cellular connection fails =
25 25  
26 26  
27 -//If there is a problem with the cellular connection. Please check the below points~://
29 +If there is a problem with the cellular connection. Please check the below points:
28 28  
29 29  
30 -== **2.1 Do you order the model with a cellular option** ==
32 +== 2.1 Do you order the model with a cellular option ==
31 31  
32 32  
33 -//Make sure you order the model with the cellular option. Can check by command or via the Web UI.//
35 +Make sure you order the model with the cellular option. Can check by command or via the Web UI.
34 34  
35 35  (% class="box" %)
36 36  (((
... ... @@ -40,16 +40,16 @@
40 40  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub//
41 41  )))
42 42  
43 -[[image:image-20220527153729-3.png]]
45 +[[image:image-20220601110748-1.png]]
44 44  
45 45  
46 -== **2.2 Do you input the SIM card correctly** ==
48 +== 2.2 Do you input the SIM card correctly ==
47 47  
48 48  
49 -**//Below command can check if you have a SIM card inserted, or via Web UI//**
51 +**Below command can check if you have a SIM card inserted, or via Web UI**
50 50  
51 -* //Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on//
52 -* //Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.//
53 +* Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on
54 +* Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.
53 53  
54 54  (% class="box" %)
55 55  (((
... ... @@ -66,19 +66,20 @@
66 66  
67 67  
68 68  (% class="wikigeneratedid" %)
69 -//**Note:** If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.//
71 +**​​(% style="color:red" %)Note:(%%)**(% style="color:red" %) **If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.**
70 70  
71 71  (% class="wikigeneratedid" %)
72 -//Please check the IP address is displayed and the Internet displays "OK", it works properly.//
74 +Please check the IP address is displayed and the Internet displays "OK", it works properly.
73 73  
74 74  (% class="wikigeneratedid" %)
75 75  [[image:image-20220527153827-5.png]]
76 76  
77 77  
78 -== **2.3 Check dialing info** ==
80 +== 2.3 Check dialing info ==
79 79  
80 -//run "**logread -f**" in gateway CLI。//
81 81  
83 +run "**logread -f**" in gateway CLI。
84 +
82 82  (% class="box" %)
83 83  (((
84 84  Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
... ... @@ -120,12 +120,51 @@
120 120  )))
121 121  
122 122  
126 +== 2.4 If the following situation occurs, how can users solve this problem? ==
123 123  
124 -= **3. Share Cellular Network for WiFi & LAN clients** =
128 +=== 2.4.1 The gateway can read the SIM card, But the Internet is displayed as Fail. ===
125 125  
126 126  
131 +Users can check whether the APN matched by the SIM card is correct.
132 +
133 +Regarding what APN your SIM card should use, Users can search for the APN corresponding to the SIM card by Google or ask the carrier.
134 +
135 +
136 +[[image:image-20220718155937-1.png||height="562" width="497"]]
137 +
138 +
139 +=== 2.4.2 The gateway can read the SIM card, But the Internet is displayed as Fail, and at the same time Network displays the carrier network. ===
140 +
141 +
142 +It should be SIM card no flow, users can insert SIM cards into the mobile phone for testing.
143 +
144 +
145 +[[image:1658131428288-728.png||height="538" width="494"]]
146 +
147 +
148 +=== 2.4.3 The gateway can't read the SIM card, and the Internet is displayed as Fail. ===
149 +
150 +
151 +Users need to check whether the SIM card type is suitable for the EC25 module.
152 +
153 +
154 +[[image:1658131612484-845.png||height="549" width="499"]]
155 +
156 +
157 +=== 2.4.4 SIM display：~*~**SIM ERROR~*~** Check SIM is inserted test SIM in a mobile phone？ ===
158 +
159 +
160 +Users can insert SIM cards into the mobile phone for testing.
161 +
162 +
163 +[[image:image-20220718160804-3.png||height="602" width="500"]]
164 +
165 +
166 += 3. Share Cellular Network for WiFi & LAN clients =
167 +
168 +
127 127  (((
128 -//By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.//
170 +By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.
129 129  )))
130 130  
131 131  (% class="box" %)
... ... @@ -162,28 +162,99 @@
162 162  )))
163 163  
164 164  (((
165 -//and run **/etc/init.d/firewall reload** or reboot the device.//
207 +and run **/etc/init.d/firewall reload** or **reboot the device**.
166 166  
209 +
210 += 4. Switching between Cellular and Ethernet and Wi-Fi networks =
211 +
212 +
213 +By default, Cell is the backup WAN where the Ethernet or Wi-Fi network is used first if they are available.
214 +
215 +Once the Ethernet of the Wi-Fi network is unavailable where the gateway network will switch to a Cell network from Ethernet or Wi-Fi.
216 +
217 +
218 +
219 +**Enable Cellular and connect Ethernet at the same time**
220 +
221 +ETH icon is displayed as ​​​ [[image:1658135519305-444.png||height="18" width="19"]] Indicates that Ethernet is the main working network.
222 +
223 +Cell icon is displayed as  [[image:1658135500498-725.png||height="17" width="17"]] Indicates that Cellular is the backup WAN.
224 +
225 +
226 +== 4.1 Switching between Cellular and Ethernet networks ==
227 +
228 +
229 +When connecting to the AP WiFI of the gateway, users can access the Web UI of the gateway through the default address 10.130.1.1
230 +
231 +[[image:image-20220606140622-2.png||height="664" width="1106"]]
232 +
233 +
234 +**Remove the network cable from the WAN port on the gateway, the gateway will switch to a Cellular network.**
235 +
236 +[[image:image-20220606140859-4.png||height="687" width="1107"]]
237 +
238 +(% style="display:none" %) (%%)
239 +
240 +== 4.2 Switching between Cellular and WiFi networks ==
241 +
242 +
243 +(% class="wikigeneratedid" %)
244 +Enable **Cellular** and connect **WiFi** at the same time
245 +
246 +WiFi icon is displayed as ​​​[[image:1658135519305-444.png||height="23" width="24"]] Indicates that WiFi is the main working network.
247 +
248 +Cell icon is displayed as  [[image:1658135500498-725.png||height="23" width="22"]] Indicates that Cellular is the backup WAN.
249 +
250 +
251 +[[image:image-20220606141113-7.png||height="678" width="1106"]]
252 +
253 +
254 +**Close the WiFi WAN, the gateway will switch to a Cellular network.**
255 +
256 +[[image:image-20220606140932-5.png||height="687" width="1107"]]
257 +
258 +
259 +== 4.3 At the same time start Cellular and Ethernet and Wi-Fi networks ==
260 +
261 +
262 +[[image:image-20220606140328-1.png||height="682" width="1108"]]
263 +
167 167  
168 168  )))
169 169  
170 -= **4. How does the gateway view the International Mobile Equipment Identity (IMEI)** =
267 += 5. How does the gateway view the International Mobile Equipment Identity (IMEI) =
171 171  
172 172  
173 -//Users can access the gateway CLI and run the minicom command to get the configuration interface.//
270 +Users can get the IMEI via Linux command, but you have to access the gateway CLI.
174 174  
272 +(% class="box infomessage" %)
175 175  (((
274 +**root@dragino-1b7c4c:~~# comgt -d /dev/ttyModemAT -s /etc/gcom/getimsi.gcom **
275 +)))
276 +
277 +[[image:image-20221027140604-1.png||height="330" width="707"]]
278 +
279 +
280 +[[image:image-20221027151146-2.png||height="554" width="1000"]]
281 +
282 +
283 +== **How does the gateway access the Quetel module directly (to send AT commands)** ==
284 +
285 +
286 +Users can access the gateway CLI and run the minicom command to get the configuration interface.
287 +
288 +(((
176 176  
177 177  
178 -**//Enter the minicom command, then select the option ''serial port setup".//**
291 +**Enter the minicom command, then select the option ''serial port setup".**
179 179  )))
180 180  
181 181  (% class="box infomessage" %)
182 182  (((
183 -root@dragino-1ef9ac:~~# minicom -s
296 +**root@dragino-1ef9ac:~~# minicom -s**
184 184  )))
185 185  
186 -[[image:https://wiki.dragino.com/images/thumb/0/05/4G-1.png/400px-4G-1.png||height="265" width="400"]]
299 +[[image:image-20220527154132-6.png]]
187 187  
188 188  
189 189  And then, change the setting:
... ... @@ -190,64 +190,89 @@
190 190  
191 191  (% class="box infomessage" %)
192 192  (((
193 -**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
306 +**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
194 194  
195 195  **Bps/Par/Bits :(% style="color:#037691" %) 9600 8N1(%%)**
196 196  )))
197 197  
198 198  
199 -//**Note: Enter the corresponding letter to change the configuration, like A,B,C**//
312 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
200 200  
201 -[[image:https://wiki.dragino.com/images/thumb/c/cb/EC25_1.png/400px-EC25_1.png||height="164" width="400"]]
314 +[[image:image-20220527154154-7.png]]
202 202  
203 203  
204 -//Enter **AT+GSN **in the interface to get the IMEI,//
317 +=== **International Mobile Equipment Identity (IMEI)** ===
205 205  
206 -// **For example (% style="color:#037691" %)860548042566627(%%)**//
207 207  
320 +(((
321 +Enter (% style="color:blue" %)**AT+GSN **(%%)in the interface to get the IMEI,
322 +)))
323 +
324 +(((
325 +**For example: (% style="color:#037691" %)860548042566627(%%)**
326 +)))
327 +
208 208  (% class="box infomessage" %)
209 209  (((
210 210  (((
211 - AT+GSN
331 + **AT+GSN**
212 212  )))
213 213  )))
214 214  
215 -[[image:https://wiki.dragino.com/images/thumb/6/66/4G-3.png/400px-4G-3.png||height="286" width="400"]]
335 +[[image:image-20220527154231-8.png]]
216 216  
217 217  
218 -= **5. How does the gateway connect to the network via a USB 4G Dongle** =
338 +=== **Integrated Circuit Card Identifier (ICCID)** ===
219 219  
220 220  
221 -== **5.1 Introduction** ==
341 +(((
342 +Enter (% style="color:blue" %)**AT+QCCID **(%%)in the interface to get the ICCID,
343 +)))
222 222  
345 +(((
346 +**For example: (% style="color:#037691" %)89860118005400261748(%%)**
223 223  
224 -(% style="color:red" %)**//Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware//**
348 +(% class="box infomessage" %)
349 +(((
350 + **AT+QCCID**
351 +)))
352 +)))
225 225  
354 +[[image:1678675878256-777.png]]
355 +
356 +
357 += 6. How does the gateway connect to the network via a USB 4G Dongle =
358 +
359 +== 6.1 Introduction ==
360 +
361 +
362 +(% style="color:red" %)**Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware**
363 +
226 226  (((
227 -//This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.//
365 +This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.
228 228  
229 229  
230 230  )))
231 231  
232 232  (((
233 -//Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.//
371 +Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.
234 234  )))
235 235  
236 236  (((
237 -//This is not beginner-friendly due to too many protocols.//
375 +This is not beginner-friendly due to too many protocols.
238 238  
239 -//For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]//
377 +For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]
240 240  
241 241  
242 242  )))
243 243  
244 -== **5.2 How to use the USB Dongle at the gateway** ==
382 +== 6.2 How to use the USB Dongle at the gateway ==
245 245  
246 246  
247 -//Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.//
385 +Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.
248 248  
249 249  (((
250 -//For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.//
388 +For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.
251 251  )))
252 252  
253 253  (% class="box" %)
... ... @@ -261,50 +261,50 @@
261 261  )))
262 262  
263 263  
264 -== **5.3 Hilink mode** ==
402 +== 6.3 Hilink mode ==
265 265  
266 266  
267 267  //Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
268 268  
269 269  
270 -=== **5.3.1 Plugs into the device** ===
408 +=== 6.3.1 Plugs into the device ===
271 271  
272 272  
273 273  (((
274 -//USB-Dongle plugs into the gateway USB port//
412 +USB-Dongle plugs into the gateway USB port
275 275  )))
276 276  
277 277  (((
278 -//Check the USB module via command (% style="color:#037691" %)**lsusb**//
416 +Check the USB module via command (% style="color:#037691" %)**lsusb**
279 279  )))
280 280  
281 281  (((
282 -(% style="color:red" %)//**Note: Users need to that connect to the gateway command line via ssh.**//
420 +(% style="color:red" %)**Note: Users need to that connect to the gateway command line via ssh.**
283 283  )))
284 284  
285 -[[image:https://wiki.dragino.com/images/2/25/Usb-4g.png||height="63" width="554"]]
423 +[[image:image-20220527154739-9.png]]
286 286  
287 287  
288 -=== 5.3.2 Detection of new network interfaces added ===
426 +=== 6.3.2 Detection of new network interfaces added ===
289 289  
290 290  
291 -//Check network configuration command line input: //
429 +Check network configuration command line input:
292 292  
293 293  (% class="box infomessage" %)
294 294  (((
295 295  (((
296 - root@dragino-1ef9ac:~~# ifconfig -a
434 +**~ root@dragino-1ef9ac:~~# ifconfig -a**
297 297  )))
298 298  )))
299 299  
300 -[[image:https://wiki.dragino.com/images/thumb/a/a0/Usb-4g-1.png/400px-Usb-4g-1.png||height="401" width="400"]]
438 +[[image:image-20220527154822-10.png]]
301 301  
302 -//In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**//
440 +In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**
303 303  
304 -//Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**//
442 +Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**
305 305  
306 306  
307 -=== **5.3.3 Add the new interface to the network configuration.** ===
445 +=== 6.3.3 Add the new interface to the network configuration. ===
308 308  
309 309  
310 310  //Enter the configuration from the command line~://
... ... @@ -320,7 +320,7 @@
320 320  /etc/init.d/network restart
321 321  )))
322 322  
323 -[[~[~[image:https://wiki.dragino.com/images/thumb/7/73/Usb-4g-4.png/600px-Usb-4g-4.png~|~|height="116" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-4.png]]
461 +[[image:image-20220527154937-11.png]]
324 324  
325 325  
326 326  //**Checking Network Configurations**//
... ... @@ -327,49 +327,81 @@
327 327  
328 328  //Command-line input: (% style="color:#037691" %)**ifconfig**//
329 329  
330 -[[~[~[image:https://wiki.dragino.com/images/b/b8/Usb-4g-3.png~|~|height="514" width="554"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-3.png]]
468 +[[image:image-20220527155013-12.png]]
331 331  
332 -//Now, Gateway is configured to access the internet on the LTE network.//
470 +Now, Gateway is configured to access the internet on the LTE network.
333 333  
334 334  
335 -== **5.4 NCM mode** ==
473 +== 6.4 NCM mode ==
336 336  
337 337  
338 -== **5.5 Troubleshooting** ==
476 +== 6.5 Troubleshooting ==
339 339  
478 +=== 6.5.1 The USB-Dongle interface cannot obtain the IP address. ===
340 340  
341 -=== **5.5.1 The USB-Dongle interface cannot obtain the IP address.** ===
342 342  
481 +Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.
343 343  
344 -//Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.//
345 345  
484 += 7. How to reduce data traffic =
346 346  
347 -= **6. How to reduce data traffic** =
486 +== 7.1 Reduce Status Uplink Interval ==
348 348  
349 349  
350 -== **6.1 Introduce** ==
489 +**The gateways will use the data traffic below two places.**
351 351  
352 352  
353 -**//The gateways will use the data traffic below two places.//**
492 +~1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.
354 354  
494 +For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.
355 355  
356 -//1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.//
496 +[[image:image-20220527155108-13.png]]
357 357  
358 -//For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.//
359 359  
360 -[[image:https://wiki.dragino.com/images/thumb/b/bc/LoRa_interval_time_setting.png/600px-LoRa_interval_time_setting.png||height="282" width="600"]]
361 361  
500 +2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.
362 362  
363 -//2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.//
502 +For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.
364 364  
365 -//For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.//
504 +[[image:image-20220527155358-16.png]]
366 366  
367 -[[image:https://wiki.dragino.com/images/thumb/4/49/Systrm_General.png/600px-Systrm_General.png||height="319" width="600"]]
506 +System General interface
368 368  
369 -//System General interface//
370 370  
371 -[[image:https://wiki.dragino.com/images/thumb/f/f0/Set_time_interval.png/600px-Set_time_interval.png||height="319" width="600"]]
509 +[[image:image-20220527155229-15.png]]
372 372  
373 -//Keepalive script interval time settings//
511 +Keepalive script interval time settings
374 374  
513 +
514 +== 7.2 Filter unwanted packets ==
515 +
516 +
517 +See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
518 +
519 +
520 +== 7.3 Usage statistics ==
521 +
522 +
523 +~1. Activate LuCI and connect to SSH following [[these instructions>>doc:Main.Install Luci in the new UI firmware.WebHome]]
524 +
525 +2. Install luci-app-statistics using the following terminal commands:
526 +
527 +{{{opkg update
528 +opkg install luci-app-statistics
529 +opkg install collectd-mod-interface
530 +/etc/init.d/collectd enable
531 +reboot
532 +}}}
533 +
534 +3. Select the interface to be monitored by going to **Statistics > Setup **in the upper menu then **Network plugins > Interfaces. **Select **3g-cellular **in the list then save. You can select multiple interfaces by pressing the **ctrl key **while selecting the interfaces.
535 +
536 +[[image:image-20221124133431-1.png]]
537 +
538 +[[image:image-20221124135102-2.png]]
539 +
540 +
541 +4. View the graphs and statistics using by going to **Statistics > Graphs** **> Interfaces > 3g-cellullar**
542 +
543 +[[image:image-20221124134927-1.png]]
544 +
375 375  
1654496261722-617.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1658131428288-728.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +258.9 KB
Content
1658131612484-845.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +226.9 KB
Content
1658135500498-725.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1658135509571-443.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1658135519305-444.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1678675878256-777.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20220527154132-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.9 KB
Content
image-20220527154154-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.4 KB
Content
image-20220527154231-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +48.8 KB
Content
image-20220527154739-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20220527154822-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +292.7 KB
Content
image-20220527154937-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.6 KB
Content
image-20220527155013-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +284.2 KB
Content
image-20220527155108-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.7 KB
Content
image-20220527155146-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.4 KB
Content
image-20220527155229-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20220527155358-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.1 KB
Content
image-20220601110748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.2 KB
Content
image-20220601110850-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220606140328-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +457.3 KB
Content
image-20220606140622-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +445.3 KB
Content
image-20220606140859-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +439.5 KB
Content
image-20220606140932-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +439.5 KB
Content
image-20220606141113-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +457.3 KB
Content
image-20220718155937-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +162.3 KB
Content
image-20220718160209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +180.4 KB
Content
image-20220718160804-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +173.5 KB
Content
image-20221027140604-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.3 KB
Content
image-20221027151146-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +51.7 KB
Content
image-20221124133431-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JeanPhilippe
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20221124134927-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JeanPhilippe
Size
... ... @@ -1,0 +1,1 @@
1 +39.6 KB
Content
image-20221124135102-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JeanPhilippe
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0