Last modified by Xiaoling on 2024/08/08 09:05
<
From version < 17.1 >
edited by Kilight Cao
on 2022/05/26 11:22
To version < 82.3 >
edited by Xiaoling
on 2023/04/20 17:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Notes for cellular network connection
1 +Cellular network connection details and tips
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -1,34 +1,38 @@
1 -Table of Contents：
1 +
2 2  
3 +**Table of Contents：**
4 +
3 3  {{toc/}}
4 4  
5 -= **1. Enable Cellular Connection** =
6 6  
7 7  
8 -//If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.//
9 += 1. Enable Cellular Connection =
9 9  
10 -[[image:https://wiki.dragino.com/images/thumb/8/81/Cellular_11.png/600px-Cellular_11.png||height="262" width="600"]]
11 11  
12 +If your device has a Cellular module, you can see the below screenshot. enable the cellular connection here.
12 12  
14 +[[image:image-20220601110850-2.png]]
15 +
13 13  **//Enable Cellular Connection//**
14 14  
18 +
15 15  (((
16 -//If your device doesn't have a cellular module, you will see a cellular module not detected.//
20 +If your device doesn't have a cellular module, you will see a cellular module not detected.
17 17  )))
18 18  
19 -[[image:https://wiki.dragino.com/images/thumb/d/da/Cellular_10.png/600px-Cellular_10.png||height="400" width="600"]]
23 +[[image:image-20220527153544-2.png]]
20 20  
21 21  
22 -= **2. How to Debug if Cellular connection fails** =
26 += 2. How to Debug if Cellular connection fails =
23 23  
24 24  
25 -//If there is a problem with the cellular connection. Please check the below points~://
29 +If there is a problem with the cellular connection. Please check the below points:
26 26  
27 27  
28 -== **2.1 Do you order the model with a cellular option** ==
32 +== 2.1 Do you order the model with a cellular option ==
29 29  
30 30  
31 -//Make sure you order the model with the cellular option. Can check by command or via the Web UI.//
35 +Make sure you order the model with the cellular option. Can check by command or via the Web UI.
32 32  
33 33  (% class="box" %)
34 34  (((
... ... @@ -38,19 +38,17 @@
38 38  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub//
39 39  )))
40 40  
45 +[[image:image-20220601110748-1.png]]
41 41  
42 -(% class="wikigeneratedid" %)
43 -[[image:image-20220525140054-1.png||height="153" width="607"]]
44 44  
48 +== 2.2 Do you input the SIM card correctly ==
45 45  
46 -== **2.2 Do you input the SIM card correctly** ==
47 47  
51 +**Below command can check if you have a SIM card inserted, or via Web UI**
48 48  
49 -**//Below command can check if you have a SIM card inserted, or via Web UI//**
53 +* Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on
54 +* Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.
50 50  
51 -* //Make sure to Power Off when you insert the SIM card and power on the device. The device doesn't support auto-detect SIM card on power on//
52 -* //Make sure you have the correct direction to insert the SIM card. Every device has an example photo in the manual for the direction.//
53 -
54 54  (% class="box" %)
55 55  (((
56 56  //root@dragino-1dadd8:~~# **comgt -d /dev/ttyUSB3**
... ... @@ -62,22 +62,24 @@
62 62  
63 63  
64 64  (% class="wikigeneratedid" %)
65 -[[image:image-20220526104201-1.png||height="625" width="543"]]
67 +[[image:image-20220527153804-4.png]]
66 66  
67 67  
68 68  (% class="wikigeneratedid" %)
69 -//**Note:** If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.//
71 +**​​(% style="color:red" %)Note:(%%)**(% style="color:red" %) **If the icon is missing some information, like SIM, Network, or Signal, which may be due to the display bug.**
70 70  
71 71  (% class="wikigeneratedid" %)
72 -//Please check the IP address is displayed and the Internet displays "OK", it works properly.//
74 +Please check the IP address is displayed and the Internet displays "OK", it works properly.
73 73  
74 74  (% class="wikigeneratedid" %)
75 -[[image:image-20220525141016-3.png||height="524" width="502"]]
77 +[[image:image-20220527153827-5.png]]
76 76  
79 +
77 77  == 2.3 Check dialing info ==
78 78  
79 -//run "**logread -f**" in gateway CLI。//
80 80  
83 +run "**logread -f**" in gateway CLI。
84 +
81 81  (% class="box" %)
82 82  (((
83 83  Fri Feb  7 01:20:28 2020 daemon.notice pppd[29452]: pppd 2.4.7 started by root, uid 0
... ... @@ -107,8 +107,8 @@
107 107  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: AT+CGDCONT=1,"IP",""^M^M
108 108  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: OK
109 109  Fri Feb  7 01:20:30 2020 local2.info chat[29485]:  ~-~- got it
110 -(% style="color:#037691" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
111 -Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator(%%)
114 +(% style="color:#037691" %)**Fri Feb  7 01:20:30 2020 local2.info chat[29485]: send (ATD*99#^M)      ~-~-~-~--> In case the dialling process already reach here.
115 +Normally the problem is with a provider, need to check if the SIM card has balance or other requirement from the cellular operator**(%%)
112 112  (% style="color:black" %)Fri Feb  7 01:20:30 2020 local2.info chat[29485]: expect (CONNECT)
113 113  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ^M
114 114  Fri Feb  7 01:20:30 2020 local2.info chat[29485]: ATD*99#^M^M
... ... @@ -118,15 +118,52 @@
118 118  Fri Feb  7 01:20:30 2020 daemon.info pppd[29452]: Serial connection established.
119 119  )))
120 120  
121 -= **3. Share Cellular Network for WiFi & LAN clients** =
122 122  
126 +== 2.4 If the following situation occurs, how can users solve this problem? ==
123 123  
124 -(((
125 -//By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.//
126 -)))
128 +=== 2.4.1 The gateway can read the SIM card, But the Internet is displayed as Fail. ===
127 127  
130 +
131 +Users can check whether the APN matched by the SIM card is correct.
132 +
133 +Regarding what APN your SIM card should use, Users can search for the APN corresponding to the SIM card by Google or ask the carrier.
134 +
135 +
136 +[[image:image-20220718155937-1.png||height="562" width="497"]]
137 +
138 +
139 +=== 2.4.2 The gateway can read the SIM card, But the Internet is displayed as Fail, and at the same time Network displays the carrier network. ===
140 +
141 +
142 +It should be SIM card no flow, users can insert SIM cards into the mobile phone for testing.
143 +
144 +
145 +[[image:1658131428288-728.png||height="538" width="494"]]
146 +
147 +
148 +=== 2.4.3 The gateway can't read the SIM card, and the Internet is displayed as Fail. ===
149 +
150 +
151 +Users need to check whether the SIM card type is suitable for the EC25 module.
152 +
153 +
154 +[[image:1658131612484-845.png||height="549" width="499"]]
155 +
156 +
157 +=== 2.4.4 SIM display：~*~**SIM ERROR~*~** Check SIM is inserted test SIM in a mobile phone？ ===
158 +
159 +
160 +Users can insert SIM cards into the mobile phone for testing.
161 +
162 +
163 +[[image:image-20220718160804-3.png||height="602" width="500"]]
164 +
165 +
166 += 3. Share Cellular Network for WiFi & LAN clients =
167 +
168 +
128 128  (((
129 -
170 +By default, the Cellular Network won't be shared with the WiFi or LAN clients. If users need to share with them, the user can modify the file.
130 130  )))
131 131  
132 132  (% class="box" %)
... ... @@ -163,28 +163,99 @@
163 163  )))
164 164  
165 165  (((
166 -//and run **/etc/init.d/firewall reload** or reboot the device.//
207 +and run **/etc/init.d/firewall reload** or **reboot the device**.
167 167  
209 +
210 += 4. Switching between Cellular and Ethernet and Wi-Fi networks =
211 +
212 +
213 +By default, Cell is the backup WAN where the Ethernet or Wi-Fi network is used first if they are available.
214 +
215 +Once the Ethernet of the Wi-Fi network is unavailable where the gateway network will switch to a Cell network from Ethernet or Wi-Fi.
216 +
217 +
218 +
219 +**Enable Cellular and connect Ethernet at the same time**
220 +
221 +ETH icon is displayed as ​​​ [[image:1658135519305-444.png||height="18" width="19"]] Indicates that Ethernet is the main working network.
222 +
223 +Cell icon is displayed as  [[image:1658135500498-725.png||height="17" width="17"]] Indicates that Cellular is the backup WAN.
224 +
225 +
226 +== 4.1 Switching between Cellular and Ethernet networks ==
227 +
228 +
229 +When connecting to the AP WiFI of the gateway, users can access the Web UI of the gateway through the default address 10.130.1.1
230 +
231 +[[image:image-20220606140622-2.png||height="664" width="1106"]]
232 +
233 +
234 +**Remove the network cable from the WAN port on the gateway, the gateway will switch to a Cellular network.**
235 +
236 +[[image:image-20220606140859-4.png||height="687" width="1107"]]
237 +
238 +(% style="display:none" %) (%%)
239 +
240 +== 4.2 Switching between Cellular and WiFi networks ==
241 +
242 +
243 +(% class="wikigeneratedid" %)
244 +Enable **Cellular** and connect **WiFi** at the same time
245 +
246 +WiFi icon is displayed as ​​​[[image:1658135519305-444.png||height="23" width="24"]] Indicates that WiFi is the main working network.
247 +
248 +Cell icon is displayed as  [[image:1658135500498-725.png||height="23" width="22"]] Indicates that Cellular is the backup WAN.
249 +
250 +
251 +[[image:image-20220606141113-7.png||height="678" width="1106"]]
252 +
253 +
254 +**Close the WiFi WAN, the gateway will switch to a Cellular network.**
255 +
256 +[[image:image-20220606140932-5.png||height="687" width="1107"]]
257 +
258 +
259 +== 4.3 At the same time start Cellular and Ethernet and Wi-Fi networks ==
260 +
261 +
262 +[[image:image-20220606140328-1.png||height="682" width="1108"]]
263 +
168 168  
169 169  )))
170 170  
171 -= **4. How does the gateway view the International Mobile Equipment Identity (IMEI)** =
267 += 5. How does the gateway view the International Mobile Equipment Identity (IMEI) =
172 172  
173 173  
174 -//Users can access the gateway CLI and run the minicom command to get the configuration interface.//
270 +Users can get the IMEI via Linux command, but you have to access the gateway CLI.
175 175  
272 +(% class="box infomessage" %)
176 176  (((
274 +**root@dragino-1b7c4c:~~# comgt -d /dev/ttyModemAT -s /etc/gcom/getimsi.gcom **
275 +)))
276 +
277 +[[image:image-20221027140604-1.png||height="330" width="707"]]
278 +
279 +
280 +[[image:image-20221027151146-2.png||height="554" width="1000"]]
281 +
282 +
283 +== **How does the gateway access the Quetel module directly (to send AT commands)** ==
284 +
285 +
286 +Users can access the gateway CLI and run the minicom command to get the configuration interface.
287 +
288 +(((
177 177  
178 178  
179 -**//Enter the minicom command, then select the option ''serial port setup".//**
291 +**Enter the minicom command, then select the option ''serial port setup".**
180 180  )))
181 181  
182 182  (% class="box infomessage" %)
183 183  (((
184 -root@dragino-1ef9ac:~~# minicom -s
296 +**root@dragino-1ef9ac:~~# minicom -s**
185 185  )))
186 186  
187 -[[image:https://wiki.dragino.com/images/thumb/0/05/4G-1.png/400px-4G-1.png||height="265" width="400"]]
299 +[[image:image-20220527154132-6.png]]
188 188  
189 189  
190 190  And then, change the setting:
... ... @@ -191,54 +191,89 @@
191 191  
192 192  (% class="box infomessage" %)
193 193  (((
194 -**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
306 +**Serial Device :** (% style="color:#037691" %)**/dev/ttyModemAT**
195 195  
196 196  **Bps/Par/Bits :(% style="color:#037691" %) 9600 8N1(%%)**
197 197  )))
198 198  
199 199  
200 -//**Note: Enter the corresponding letter to change the configuration, like A,B,C**//
312 +(% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**
201 201  
202 -[[image:https://wiki.dragino.com/images/thumb/c/cb/EC25_1.png/400px-EC25_1.png||height="164" width="400"]]
314 +[[image:image-20220527154154-7.png]]
203 203  
204 204  
205 -//Enter AT+GSN in the serial port to view the IMEI//
317 +=== **International Mobile Equipment Identity (IMEI)** ===
206 206  
207 -For example :** (% style="color:#037691" %)860548042566627(%%)**
208 208  
320 +(((
321 +Enter (% style="color:blue" %)**AT+GSN **(%%)in the interface to get the IMEI,
322 +)))
323 +
324 +(((
325 +**For example: (% style="color:#037691" %)860548042566627(%%)**
326 +)))
327 +
209 209  (% class="box infomessage" %)
210 210  (((
211 211  (((
212 - AT+GSN
331 + **AT+GSN**
213 213  )))
214 214  )))
215 215  
216 -[[image:https://wiki.dragino.com/images/thumb/6/66/4G-3.png/400px-4G-3.png||height="286" width="400"]]
335 +[[image:image-20220527154231-8.png]]
217 217  
218 -= **5. How does the gateway connect to the network via a USB 4G Dongle** =
219 219  
220 -== **5.1 Introduction** ==
338 +=== **Integrated Circuit Card Identifier (ICCID)** ===
221 221  
222 -(% style="color:red" %)//**Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware**//
223 223  
224 224  (((
225 -//This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.//
342 +Enter (% style="color:blue" %)**AT+QCCID **(%%)in the interface to get the ICCID,
226 226  )))
227 227  
228 228  (((
229 -//Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended. For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]//
346 +**For example: (% style="color:#037691" %)89860118005400261748(%%)**
347 +
348 +(% class="box infomessage" %)
349 +(((
350 + **AT+QCCID**
230 230  )))
352 +)))
231 231  
354 +[[image:1678675878256-777.png]]
355 +
356 +
357 += 6. How does the gateway connect to the network via a USB 4G Dongle =
358 +
359 +== 6.1 Introduction ==
360 +
361 +
362 +(% style="color:red" %)**Prerequisite: Requires a USB 4G Dongle and a supported gateway firmware**
363 +
232 232  (((
233 -//This is not beginner-friendly due to too many protocols.//
365 +This introduces a setup and configured gateway for using a USB 3g/UMTS-modem for WAN connection.
366 +
367 +
234 234  )))
235 235  
236 -== **5.2 How to use the USB-Dongle at the gateway** ==
370 +(((
371 +Many modes (and most **LTE**) USB modems provide **qmi**, **mbim**, **ncm**, **rndis** protocol for connection instead of legacy **ppp** protocol, they are faster and better, overall recommended.
372 +)))
237 237  
238 -//Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.//
374 +(((
375 +This is not beginner-friendly due to too many protocols.
239 239  
377 +For more information: [[https:~~/~~/openwrt.org/docs/guide-user/network/wan/wwan/3gdongle>>url:https://openwrt.org/docs/guide-user/network/wan/wwan/3gdongle]]
378 +
379 +
380 +)))
381 +
382 +== 6.2 How to use the USB Dongle at the gateway ==
383 +
384 +
385 +Most of the products can be used on the gateway, but because their protocols are different, they are not used in the same way.
386 +
240 240  (((
241 -//For example, the Huawei-E3372/E8372 is using Hilink mode or NCM mode.//
388 +For example, the Huawei-E3372/E8372 is using **Hilink mode** or **NCM mode**.
242 242  )))
243 243  
244 244  (% class="box" %)
... ... @@ -251,45 +251,53 @@
251 251  **~ **(% style="color:red" %)**Note： The e3372 in the vast majority of cases is Hilink mode**
252 252  )))
253 253  
254 -== **5.3 Hilink mode** ==
255 255  
402 +== 6.3 Hilink mode ==
403 +
404 +
256 256  //Gateway upgrade to the specified firmware:[[Hilink.mode~~-~~-build-v5.4.1625627505>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308-LG301/Firmware/USB-Dongle_firmware/Hilink.mode--build-v5.4.1625627505-20210707-1113/]]//
257 257  
258 -=== **5.3.1 Plugs into the device** ===
259 259  
408 +=== 6.3.1 Plugs into the device ===
409 +
410 +
260 260  (((
261 -//USB-Dongle plugs into the gateway USB port//
412 +USB-Dongle plugs into the gateway USB port
262 262  )))
263 263  
264 264  (((
265 -//Check the USB module via command (% style="color:#037691" %)**lsusb**//
416 +Check the USB module via command (% style="color:#037691" %)**lsusb**
266 266  )))
267 267  
268 268  (((
269 -(% style="color:red" %)//**Note: Users need to that connect to the gateway command line via ssh.**//
420 +(% style="color:red" %)**Note: Users need to that connect to the gateway command line via ssh.**
270 270  )))
271 271  
272 -[[image:https://wiki.dragino.com/images/2/25/Usb-4g.png||height="63" width="554"]]
423 +[[image:image-20220527154739-9.png]]
273 273  
274 -=== 5.3.2 Detection of new network interfaces added ===
275 275  
276 -//Command-line input: //
426 +=== 6.3.2 Detection of new network interfaces added ===
277 277  
428 +
429 +Check network configuration command line input:
430 +
278 278  (% class="box infomessage" %)
279 279  (((
280 280  (((
281 - root@dragino-1ef9ac:~~# ifconfig -a
434 +**~ root@dragino-1ef9ac:~~# ifconfig -a**
282 282  )))
283 283  )))
284 284  
285 -[[image:https://wiki.dragino.com/images/thumb/a/a0/Usb-4g-1.png/400px-Usb-4g-1.png||height="401" width="400"]]
438 +[[image:image-20220527154822-10.png]]
286 286  
287 -//In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**//
440 +In the command, the output user can see that the new interface added is (% style="color:#037691" %)**eth2**
288 288  
289 -//Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**//
442 +Usually, the user can see that the new interface added is (% style="color:#037691" %)**eth2** (% style="color:black" %)or (% style="color:#037691" %)**wwan0**
290 290  
291 -=== **5.3.3 Add the new interface to the network configuration.** ===
292 292  
445 +=== 6.3.3 Add the new interface to the network configuration. ===
446 +
447 +
293 293  //Enter the configuration from the command line~://
294 294  
295 295  (% class="box" %)
... ... @@ -303,46 +303,88 @@
303 303  /etc/init.d/network restart
304 304  )))
305 305  
306 -[[~[~[image:https://wiki.dragino.com/images/thumb/7/73/Usb-4g-4.png/600px-Usb-4g-4.png~|~|height="116" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-4.png]]
461 +[[image:image-20220527154937-11.png]]
307 307  
308 -//Checking Network Configurations//
309 309  
464 +//**Checking Network Configurations**//
465 +
310 310  //Command-line input: (% style="color:#037691" %)**ifconfig**//
311 311  
312 -[[~[~[image:https://wiki.dragino.com/images/b/b8/Usb-4g-3.png~|~|height="514" width="554"~]~]>>url:https://wiki.dragino.com/index.php/File:Usb-4g-3.png]]
468 +[[image:image-20220527155013-12.png]]
313 313  
314 -//Now, Gateway is configured to access the internet on the LTE network.//
470 +Now, Gateway is configured to access the internet on the LTE network.
315 315  
316 -== **5.4 NCM mode** ==
317 317  
318 -== **5.5 Troubleshooting** ==
473 +== 6.4 NCM mode ==
319 319  
320 -=== **5.5.1 The USB-Dongle interface cannot obtain the IP address.** ===
321 321  
322 -//Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.//
476 +== 6.5 Troubleshooting ==
323 323  
324 -= **6. How to reduce data traffic** =
478 +=== 6.5.1 The USB-Dongle interface cannot obtain the IP address. ===
325 325  
326 -== **6.1 Introduce** ==
327 327  
328 -//The gateways will use the data traffic below two places.//
481 +Please try this USB dongle to access the internet on your PC, to make sure this USB dongle can normally access the internet.
329 329  
330 -//1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.//
331 331  
332 -//For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.//
484 += 7. How to reduce data traffic =
333 333  
334 -[[image:https://wiki.dragino.com/images/thumb/b/bc/LoRa_interval_time_setting.png/600px-LoRa_interval_time_setting.png||height="282" width="600"]]
486 +== 7.1 Reduce Status Uplink Interval ==
335 335  
336 -//2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.//
337 337  
338 -//For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.//
489 +**The gateways will use the data traffic below two places.**
339 339  
340 -[[image:https://wiki.dragino.com/images/thumb/4/49/Systrm_General.png/600px-Systrm_General.png||height="319" width="600"]]
341 341  
342 -//System General interface//
492 +~1. There is the data traffic from LoRa package Forward which were the gateway status package and sensor end node uplink/downlink.
343 343  
344 -[[image:https://wiki.dragino.com/images/thumb/f/f0/Set_time_interval.png/600px-Set_time_interval.png||height="319" width="600"]]
494 +For this case, by default, the gateway will uplink self-status to the LoRaWAN server per the 30s. the users can adjust the interval time.
345 345  
346 -//Keepalive script interval time settings//
496 +[[image:image-20220527155108-13.png]]
347 347  
498 +
499 +
500 +2. There is the data traffic from the gateway check self-network status. by default, the gateway will check the network per 15s.
501 +
502 +For this case, We have monitored the loss of data traffic, which is the loss of 2M data traffic per day. the users can adjust the interval time following screenshots.
503 +
504 +[[image:image-20220527155358-16.png]]
505 +
506 +System General interface
507 +
508 +
509 +[[image:image-20220527155229-15.png]]
510 +
511 +Keepalive script interval time settings
512 +
513 +
514 +== 7.2 Filter unwanted packets ==
515 +
516 +
517 +See [[How to filter unwanted packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
518 +
519 +
520 +== 7.3 Usage statistics ==
521 +
522 +
523 +~1. Activate LuCI and connect to SSH following [[these instructions>>doc:Main.Install Luci in the new UI firmware.WebHome]]
524 +
525 +2. Install luci-app-statistics using the following terminal commands:
526 +
527 +{{{opkg update
528 +opkg install luci-app-statistics
529 +opkg install collectd-mod-interface
530 +/etc/init.d/collectd enable
531 +reboot
532 +}}}
533 +
534 +3. Select the interface to be monitored by going to **Statistics > Setup **in the upper menu then **Network plugins > Interfaces. **Select **3g-cellular **in the list then save. You can select multiple interfaces by pressing the **ctrl key **while selecting the interfaces.
535 +
536 +[[image:image-20221124133431-1.png]]
537 +
538 +[[image:image-20221124135102-2.png]]
539 +
540 +
541 +4. View the graphs and statistics using by going to **Statistics > Graphs** **> Interfaces > 3g-cellullar**
542 +
543 +[[image:image-20221124134927-1.png]]
544 +
348 348  
1654496261722-617.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1658131428288-728.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +258.9 KB
Content
1658131612484-845.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +226.9 KB
Content
1658135500498-725.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1658135509571-443.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1658135519305-444.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1678675878256-777.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20220527153337-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +25.3 KB
Content
image-20220527153544-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +21.4 KB
Content
image-20220527153729-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +19.8 KB
Content
image-20220527153804-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.9 KB
Content
image-20220527153827-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.0 KB
Content
image-20220527154132-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.9 KB
Content
image-20220527154154-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.4 KB
Content
image-20220527154231-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +48.8 KB
Content
image-20220527154739-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +38.1 KB
Content
image-20220527154822-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +292.7 KB
Content
image-20220527154937-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.6 KB
Content
image-20220527155013-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +284.2 KB
Content
image-20220527155108-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.7 KB
Content
image-20220527155146-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.4 KB
Content
image-20220527155229-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20220527155358-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.1 KB
Content
image-20220601110748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.2 KB
Content
image-20220601110850-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +25.2 KB
Content
image-20220606140328-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +457.3 KB
Content
image-20220606140622-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +445.3 KB
Content
image-20220606140859-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +439.5 KB
Content
image-20220606140932-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +439.5 KB
Content
image-20220606141113-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +457.3 KB
Content
image-20220718155937-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +162.3 KB
Content
image-20220718160209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +180.4 KB
Content
image-20220718160804-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +173.5 KB
Content
image-20221027140604-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.3 KB
Content
image-20221027151146-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +51.7 KB
Content
image-20221124133431-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JeanPhilippe
Size
... ... @@ -1,0 +1,1 @@
1 +24.0 KB
Content
image-20221124134927-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JeanPhilippe
Size
... ... @@ -1,0 +1,1 @@
1 +39.6 KB
Content
image-20221124135102-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JeanPhilippe
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0