Wiki source code of Notes for TTN

Version 81.1 by Xiaoling on 2022/05/26 14:03

version	line-number	content
1.4	1	~ Contents：
1.1	2
1.4	3	{{toc/}}
1.1	4
	5
1.2	6	= 1. The Things Network-V3 =
1.1	7
1.2	8	== 1.1 Introduction ==
1.1	9
1.2	10	=== 1.1.1 What is The Things Network ===
1.1	11
1.2	12	(((
	13	The Things Network is a global collaborative Internet of Things ecosystem that creates networks, devices and solutions using LoRaWAN.
	14	)))
1.1	15
1.2	16	(((
	17	The Things Network runs The Things Stack Community Edition, which is a crowdsourced, open and decentralized LoRaWAN network. This network is a great way to get started testing devices, applications, and integrations, and get familiar with LoRaWAN.
66.2	18
	19
1.2	20	)))
1.1	21
1.2	22	=== 1.1.2 Login or crate an account ===
1.1	23
1.2	24	(((
	25	[[Login or create an account>>url:https://console.cloud.thethings.network/]] to get started with The Things Network and start using The Things Stack Console.
	26	)))
1.1	27
1.2	28	(((
	29	Once you have an account,get started by following steps for adding Gateway,Device and Intergrations.
66.2	30
	31
1.2	32	)))
1.1	33
1.2	34	=== 1.1.3 List the support products and Requirements ===
1.1	35
1.2	36	LoRaWAN Gateway model: Existing Gateway
1.1	37
66.2	38
1.2	39	= 2. Gateway Registration for Semtech UDP =
1.1	40
1.3	41	== 2.1 Primary LoRaWAN Server ==
1.1	42
63.2	43	[[image:image-20220526134633-2.png\|\|height="616" width="1323"]]
1.2	44
	45	Register Gateway
	46
	47
63.2	48	[[image:image-20220526134826-4.png]]
1.3	49
1.2	50	Put Gateway ID
	51
	52
63.2	53	[[image:image-20220526134759-3.png]]
1.3	54
1.2	55	Choose Frequency Band
	56
	57
64.2	58	[[image:image-20220526134919-5.png]]
1.3	59
1.2	60	Show Status
	61
66.2	62
1.3	63	== 2.2 Secondary LoRaWAN Server ==
1.2	64
1.3	65	=== 2.2.1 Introduction ===
1.2	66
	67	The Dragino gateway has supports the Secondary server settings.
	68
66.2	69
1.3	70	=== 2.2.2 Below list the support products and Requirements: ===
1.2	71
2.4	72	(((
	73	~1. LoRaWAN Gateway model: [[LIG16>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/171-lig16.html]], [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]] [[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
	74	)))
1.2	75
2.4	76	(((
	77	2. Firmware version since :[[lgw~~-~~-build-v5.4.1644658774>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware/Release/]]
	78	)))
1.2	79
66.2	80
1.3	81	=== 2.2.3 Example ===
1.2	82
66.2	83	The following takes Helium as a Secondary LoRaWAN server as an example
1.2	84
66.2	85
1.3	86	=== 2.2.4 Step 1: Download and Install the helium gateway-rs ===
1.2	87
	88	The users is needing to download and install the helium gateway-rs then click the button of Save&Apply
	89
66.2	90	[[image:image-20220526135049-6.png]]
1.2	91
	92	Download and Install gateway-rs
	93
66.2	94
1.3	95	=== 2.2.5 Step 2: Back to Semtech UDP page ===
1.2	96
	97	Back to the page of Semtech UDP check the secondary server settings and click the button of Save&Apply
	98
66.2	99	[[image:image-20220526135125-7.png]]
1.2	100
	101	Configuration of helium
	102
67.2	103
1.3	104	= 3. Gateway Registration for Basics Station =
1.2	105
1.3	106	== 3.1 Introduction ==
1.2	107
1.3	108	(((
1.6	109	(((
1.2	110	The LoRa Basics™ Station protocol simplifies management of large scale LoRaWAN networks. LoRa Basics™ Station is the preferred way of connecting Gateways to The Things Stack. [[The LoRa Basics Station doc>>url:https://www.thethingsindustries.com/docs/gateways/lora-basics-station/]]
1.3	111	)))
1.6	112	)))
1.2	113
1.6	114	(((
1.2	115	Below list the support products and Requirements:
1.6	116	)))
1.2	117
1.6	118	(((
	119	(((
	120	~1. LoRaWAN Gateway model: [[LIG16>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/171-lig16.html]], [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]] [[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
1.3	121	)))
1.2	122
1.6	123	(((
	124	2. Firmware version since :[[lgw~~-~~-build-v5.4.1640315898>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/]]
1.3	125	)))
1.6	126	)))
1.2	127
1.6	128	(((
1.2	129	What do you need to prepare
1.6	130	)))
1.2	131
1.3	132	(((
1.6	133	(((
1.2	134	A gateway that can access the internet normally
67.2	135
	136
1.3	137	)))
1.6	138	)))
1.2	139
1.3	140	== 3.2 Step 1. Add Gateway ==
1.2	141
1.3	142	(((
1.7	143	(((
1.2	144	The example for EU
1.3	145	)))
1.7	146	)))
1.2	147
1.3	148	(((
1.7	149	(((
1.2	150	User can add your gateway into The Things Network V3 according to the previous step
1.3	151	)))
1.7	152	)))
1.2	153
1.3	154	(((
1.7	155	(((
1.2	156	Following picture is the successful added.
1.3	157	)))
1.7	158	)))
1.2	159
67.2	160	[[image:image-20220526135316-8.png]]
1.2	161
	162	Add Gateway
	163
69.2	164
1.3	165	== 3.3 Step 2. Create the API key ==
1.2	166
	167	user need to create the CUPS API key and LNS API key.
	168
69.2	169	[[image:image-20220526135349-9.png]]
1.2	170
	171	Create CUPS API key
	172
	173
69.2	174	[[image:image-20220526135428-10.png]]
1.3	175
1.2	176	Create LNS API key
	177
1.7	178	(% style="color:red" %)Note : Please copy the API key.
1.2	179
71.2	180
1.3	181	== 3.4 Step 3. Update the gateway setting ==
1.2	182
	183	In the LoRa Basics Station LNS Authentication Key field, paste the API key you generated in the previous step.
	184
70.2	185	[[image:image-20220526135528-11.png]]
1.2	186
	187	paste the API key
	188
71.2	189
1.3	190	== 3.5 Step 4. Access the gateway GUI ==
1.2	191
	192	User need to update the API key and install the Certificate
	193
71.2	194	[[image:image-20220526135601-12.png]]
1.2	195
	196	Access the gateway GUI
	197
73.2	198
1.3	199	== 3.6 Step 5. Configure Station ==
1.2	200
	201	User need to input Server URI, Server CUPS Key and LNS Key, as well as install CUPS certificate.
	202
	203	just to clarify.
	204
1.7	205	(% class="box" %)
	206	(((
	207	CUPS Server URI ~-~-> Server Adress
	208	CUPS Authorization Key ~-~-> Server CUPS API Key
	209	LNS Authorization Key ~-~-> Server LNS API Key
	210	CUPS certificate ~-~-> Server CA(user can use the button to install the certificate by default)
	211	)))
1.2	212
73.2	213	[[image:image-20220526135654-13.png]]
1.2	214
	215	Congfigure Station
	216
73.2	217
1.3	218	== 3.7 Start Station ==
1.2	219
1.3	220	(((
1.2	221	When the user has finished the configuration,Please click Sace&Apply to start station to connect The Things Network.
73.2	222
	223
1.3	224	)))
1.2	225
1.3	226	== 3.8 Siccessful Connection ==
1.2	227
	228	If user completes the above steps,which will see live date in the TTN.
	229
73.2	230	[[image:image-20220526135734-14.png]]
1.2	231
	232	Station live date
	233
74.2	234
1.3	235	== 3.9 Trouble Shooting ==
1.2	236
	237	User can check the station log in the logread/system log page.
	238
74.2	239	[[image:image-20220526135845-15.png]]
1.2	240
	241	Station Log
	242
75.2	243
1.2	244	and recode the station log in the system/Recode log page.
	245
75.2	246	[[image:image-20220526135940-16.png]]
1.2	247
	248	Recore Log
	249
75.2	250
1.3	251	= 4. Configure node connection to TTNv3 =
1.2	252
1.3	253	(((
1.8	254	(((
1.2	255	Following is an example for how to join the TTN v3 LoRaWAN Network.
1.3	256	)))
1.8	257	)))
1.2	258
1.3	259	(((
1.8	260	(((
1.2	261	The gateway is already set up to connect to the TTN network, so we now need to configure the TTNv3 server.
1.3	262	)))
1.8	263	)))
1.2	264
1.3	265	(((
1.8	266	(((
1.2	267	We take LES01 as an example.
77.2	268
	269
1.3	270	)))
1.8	271	)))
1.2	272
1.3	273	== 4.1 Step1 ==
1.2	274
1.3	275	(((
1.8	276	(((
1.2	277	Create a device in TTN with the OTAA keys from LSE01.
1.3	278	)))
1.8	279	)))
1.2	280
1.3	281	(((
1.8	282	(((
1.2	283	Each LSE01 is shipped with a sticker with the default device EUI as below:
1.3	284	)))
1.8	285	)))
1.2	286
1.3	287	(((
1.8	288	(((
1.2	289	You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
1.3	290	)))
1.8	291	)))
1.2	292
77.2	293	[[image:image-20220526140015-17.png]]
1.2	294
77.2	295	[[image:image-20220526140044-18.png]]
1.2	296
1.3	297	== 4.2 Step2 ==
1.2	298
1.3	299	(((
1.8	300	(((
1.2	301	There are all our nodes in the repository. Users can choose the corresponding brand, model, firmware version and frequency.The decoder and configuration information of the node are pre-configured.Users do not need to configure them.
1.3	302	)))
1.8	303	)))
1.2	304
24.2	305	[[image:image-20220525090920-18.png]]
1.2	306
1.3	307	== 4.3 Step3 ==
1.2	308
	309	Add APP EUI in the application:
	310
24.2	311	[[image:image-20220525091022-19.png]]
1.2	312
1.3	313	== 4.4 Step4 ==
1.2	314
	315	Add APP KEY and DEV EUI:
	316
24.2	317	[[image:image-20220525091128-20.png]]
1.2	318
1.3	319	= 5. TTN V3 integrated into MQTT server =
1.2	320
1.3	321	== 5.1 Introduction ==
1.2	322
1.3	323	(((
1.9	324	(((
1.2	325	The Application Server exposes an MQTT server to work with streaming events. In order to use the MQTT server you need to create a new API key, which will function as connection password. You can also use an existing API key, as long as it has the necessary rights granted.
1.3	326	)))
1.9	327	)))
1.2	328
1.3	329	== 5.2 Create device steps at MQTT ==
1.2	330
1.3	331	(((
1.9	332	(((
1.2	333	The user creates a new API KEY after creating a device on TTN V3.
1.3	334	)))
1.9	335	)))
1.2	336
1.3	337	(((
1.9	338	(((
1.2	339	Then copy the password and open MQTT.fx.
1.3	340	)))
1.9	341	)))
1.2	342
1.3	343	(((
1.9	344	(((
1.2	345	Fill in Broker Address and Broker port.
1.3	346	)))
1.9	347	)))
1.2	348
24.2	349	[[image:image-20220525091251-22.png]]
1.2	350
	351	Fill in the username and password into MQTT.
	352
	353
27.2	354	[[image:image-20220525091333-23.png]]
1.3	355
1.2	356	The Application Server publishes uplink traffic on the following topics:
	357
1.9	358	(% class="box" %)
	359	(((
	360	v3/{application id}@{tenant id}/devices/{device id}/join
1.2	361	v3/{application id}@{tenant id}/devices/{device id}/up
	362	v3/{application id}@{tenant id}/devices/{device id}/down/queued
	363	v3/{application id}@{tenant id}/devices/{device id}/down/sent
	364	v3/{application id}@{tenant id}/devices/{device id}/down/ack
	365	v3/{application id}@{tenant id}/devices/{device id}/down/nack
	366	v3/{application id}@{tenant id}/devices/{device id}/down/failed
	367	v3/{application id}@{tenant id}/devices/{device id}/service/data
	368	v3/{application id}@{tenant id}/devices/{device id}/location/solved
1.9	369	)))
1.2	370
1.3	371	(((
1.9	372	(((
	373	Note: Remember that the format of these topics for The Things Stack Open Source would contain {application id} instead of {application id}@{tenant id}.
1.3	374	)))
1.9	375	)))
1.2	376
27.2	377	[[image:image-20220525091430-24.png]]
1.2	378
1.3	379	(((
1.9	380	(((
1.2	381	While you could subscribe to all of these topics separately, for the simplicity of this tutorial we use # to subscribe to all topics, i.e. to receive all uplink traffic.
1.3	382	)))
1.9	383	)))
1.2	384
27.2	385	[[image:image-20220525091458-25.png]]
1.2	386
1.3	387	(((
1.10	388	(((
1.2	389	Downlinks can be scheduled by publishing the message to the topic v3/{application id}@{tenant id}/devices/{device id}/down/push.
1.3	390	)))
1.10	391	)))
1.2	392
1.3	393	(((
1.10	394	(((
2.2	395	Note: Remember that the format of this topic for The Things Stack Open Source deployment would be v3/{application id}/devices/{device id}/down/push.
1.3	396	)))
1.10	397	)))
1.2	398
1.3	399	(((
1.10	400	(((
1.2	401	Instead of /push, you can also use /replace to replace the downlink queue. Replacing with an empty array clears the downlink queue. Example:
1.3	402	)))
1.10	403	)))
1.2	404
34.2	405	[[image:image-20220525091618-27.png]]
1.2	406
1.3	407	(((
1.2	408	To send an unconfirmed downlink message to the device dev1 in application app1 in tenant tenant1 with the hexadecimal payload BE EF on FPort 15 with normal priority, use the topic v3/app1@tenant1/devices/dev1/down/push with the following contents:
1.3	409	)))
1.2	410
1.3	411	(((
2.2	412	Note: Use this handy tool to convert hexadecimal to base64.
1.3	413	)))
1.2	414
34.2	415	[[image:image-20220525091702-28.png]]
1.2	416
1.3	417	== 5.3 Send Downlink message ==
1.2	418
1.3	419	(((
1.2	420	How to configure downlink in TTN V3?
1.3	421	)))
1.2	422
1.3	423	(((
1.2	424	A few examples: set the transmission interval to 90 seconds.
1.3	425	)))
1.2	426
1.3	427	(((
1.2	428	Downlink command:01 00 00 5A
1.3	429	)))
1.2	430
34.2	431	[[image:image-20220525091752-29.png]]
1.2	432
	433	downlink
	434
	435	After sending, you can view it in live data.
	436
34.2	437	[[image:image-20220525091816-30.png]]
1.2	438
	439	downlink
	440
1.3	441	(((
1.2	442	When downlink is successfully sent, the downlink information can be received on the serial port.
1.3	443	)))
1.2	444
1.3	445	(((
2.2	446	Note: If the downlink byte sent is longer, the number of bytes will be displayed.
1.3	447	)))
1.2	448
34.2	449	[[image:image-20220525091855-31.png]]
1.2	450
	451	downlink
	452
1.3	453	(((
1.14	454	(((
1.2	455	If you want to get a successful reply to send downlink in TTN v3. You need to set the response level.
1.3	456	)))
1.14	457	)))
1.2	458
1.3	459	(((
1.14	460	(((
2.2	461	If the equipment uses CLASS A. You can set AT+RPL=2 or send the downlink command: 2102
1.3	462	)))
1.14	463	)))
1.2	464
1.3	465	(((
1.14	466	(((
2.4	467	If the equipment uses CLASS C. You can set AT+RPL=4 or send the downlink command: 2104
1.3	468	)))
1.14	469	)))
1.2	470
1.3	471	(((
1.14	472	(((
1.2	473	When the device successfully receives the downlink, the server will receive a confirmation packet of 00.
1.3	474	)))
1.14	475	)))
1.2	476
34.2	477	[[image:image-20220525091925-32.png]]
1.2	478
	479	downlink
	480
1.3	481	= 6. Request Remote Support =
1.2	482
1.3	483	(((
1.2	484	These pages are useful to check what is wrong on the Join process. Below shows the four steps that we can check the Join Process.
1.13	485	\\If problem not solve, and you need dragino remote support, please follow to this document: [[TTN Support instruction>>url:https://www.dragino.com/downloads/index.php?dir=&file=TTNv3_Support_Guide.pdf]](% style="color:red" %) If user has checked below steps and still can't solve the problem, please send us (support @ dragino.com) the screenshots for each step to check. They include:
1.3	486	)))
1.2	487
	488	* End node is connected to serial port to show the Join frequency and DR. (If possible)
	489	* Gateway (from gateway UI) traffic to show the packet got from end node and receive from Server. (If possible)
	490	* Gateway traffic (from server UI) to shows the data exchange between gateway and server. (Normally possible)
	491	* End Node traffic (from server UI) to shows end node activity in server. (Normally possible)
	492	* End Node Keys screen shot shows in end node and server. so we can check if the keys are correct. (In most case, we found keys doesn't match, especially APP EUI)
	493
	494	~1. End Device Join Screen shot, we can check:
	495
	496	* If the device is sending join request to server?
	497	* What frequency the device is sending?
	498
36.2	499	[[image:image-20220525092012-33.png]]
1.2	500
	501	Console Output from End device to see the transmit frequency
	502
2.3	503	User can run AT+CFG command to print configuration information.
1.2	504
2.3	505	* Is the device in OTAA mode or ABP mode? AT+NJM=1 (OTAA mode), AT+NJM=0 (ABP mode)
1.2	506
36.2	507	[[image:image-20220525092043-34.png]]
1.2	508
	509	Console Output from End device to see the transmit frequency
	510
	511	2. Gateway packet traffic in gateway web or ssh. we can check:
	512
1.13	513	* (((
	514	If the gateway receive the Join request packet from sensor? (If this fail, check if the gateway and sensor works on the match frequency)
	515	)))
	516	* (((
	517	If the gateway gets the Join Accept message from server and transmit it via LoRa?
	518	)))
1.2	519
37.2	520	[[image:image-20220525092124-35.png]]
1.2	521
	522	Console Output from Gateway to see packets between end node and server.
	523
	524
	525	3. Gateway Traffic Page in LoRaWAN Server
	526
1.12	527	* (((
	528	If the Join Request packet arrive the gateway traffic in server? If not, check the internet connection and gateway LoRaWAN server settings.
	529	)))
	530	* (((
	531	If the server send back a Join Accept for the Join Request? if not, check if the keys from the device match the keys you put in the server, or try to choose a different server route for this end device.
	532	)))
	533	* (((
	534	If the Join Accept message are in correct frequency? If you set the server to use US915 band, and your end node and gateway is EU868, you will see the Join Accept message are in US915 band so no possible to Join success.
	535	)))
1.2	536
39.2	537	[[image:image-20220525092157-36.png]]
1.2	538
	539	The Traffic for the End node in the server, use TTNv3 as example
	540
	541
39.2	542	[[image:image-20220525092231-37.png]]
1.3	543
1.2	544	The Traffic for the End node in the server, use TTNv3 as example
	545
	546	4. Data Page in LoRaWAN server
	547
1.11	548	(((
2.3	549	(((
41.2	550	(((
1.3	551	If this data page shows the Join Request message from the end node? If not, most properly you have wrong settings in the keys. Keys in the server doesn't match the keys in End Node.
41.2	552
	553	[[image:image-20220525092546-1.png]]
1.3	554	)))
1.11	555	)))
2.3	556	)))
1.2	557
	558	The data for the end device set in server
	559
40.2	560	[[image:image-20220525092430-40.png]]
1.2	561
	562	Check if OTAA Keys match the keys in device

Wiki source code of Notes for TTN

Applications

Navigation