Wiki source code of Notes for ChirpStack

Version 86.17 by Xiaoling on 2022/05/30 15:30

version	line-number	content
1.7	1	~ Contents:
1.2	2
1.1	3	{{toc/}}
	4
86.4	5
	6
	7
1.2	8	= 1. Introduction =
1.1	9
53.1	10	(% style="color:black" %)The ChirpStack open-source LoRaWAN Network Server stack provides open-source components for LoRaWAN networks And the Chirpstack supports the users in building a private LoRaWAN Server. For more info please refer to this [[link>>url:https://www.chirpstack.io/]]
1.1	11
1.5	12	(((
51.1	13	(% style="color:black" %)The dragino gateway can connect the ChirpStack server via Semtech UDP or Semtech Basic Station.
1.5	14	)))
1.1	15
1.2	16	Prerequisite
1.1	17
1.2	18	1) Have a Chirstack Server.
1.1	19
54.2	20	[[image:image-20220525100058-1.png]]
1.1	21
1.2	22	ChirpStack home page
1.1	23
54.2	24
1.2	25	2) Gateway model support
1.1	26
1.2	27	(% class="box" %)
	28	(((
1.5	29	(((
1.2	30	Semtech UDP : All Model
	31	Basic Station : , ,
	32	Note : the firmware needs > if use the Bais station
	33	)))
1.5	34	)))
1.1	35
86.5	36
	37
1.2	38	= 2. Semtech UDP =
1.1	39
1.2	40	== 2.1 Step 1. Add the Network-servers ==
1.1	41
1.2	42	The network-Servers address varies depending on the ChirpStack server setup environment
1.1	43
1.3	44	(% class="box" %)
	45	(((
	46	Windows ~-~->Network-server server * : localhost:8000
	47	Linux ~-~->Network-server server * : chirpstack-network-server:8000
	48	)))
1.1	49
1.2	50	If the user cannot add network-Servers, re-check the ChirpStack code or the server building process.
1.1	51
55.2	52	[[image:image-20220525100158-2.png]]
1.2	53
	54	Add the Network-servers
	55
84.2	56
1.2	57	== 2.2 Step 2. Create Gateway-profiles ==
	58
59.2	59	[[image:image-20220525100255-3.png]]
1.2	60
	61	Create Gateway-profiles
	62
84.2	63
1.2	64	== 2.3 Step 3. Create Service-profiles ==
	65
59.2	66	[[image:image-20220525100322-4.png]]
1.2	67
	68	Create Service-profiles
	69
	70	In Step 3. Create Service-profiles, the above parameters can be set. If necessary, you can set them by yourself. This is only an example.
	71
1.4	72	(% style="color:red" %)Note : Before add the gateway, the user needs to complete the preceding three steps.
1.2	73
84.2	74	If the user has completed the preceding steps, proceed to the next step.(% style="display:none" %)
1.2	75
84.2	76
1.2	77	== 2.4 Step 4. Add the gateway ==
	78
	79	The example gateway id is: a840411e96744150
	80
1.5	81	(((
1.4	82	(% style="color:red" %)Note : The Gateway EUI and server addresses must match the ChirpStack configuration.
1.5	83	)))
1.2	84
84.2	85	[[image:image-20220525100350-5.png]](% style="display:none" %)
1.2	86
84.2	87
1.2	88	Add the gateway
	89
59.2	90	[[image:image-20220525100417-6.png]]
1.2	91
	92	Configure the gateway
	93
84.2	94
1.2	95	== 2.5 Step 5. Checking gateway Status ==
	96
84.2	97	[[image:image-20220525100448-7.png]](% style="display:none" %)
1.2	98
84.2	99
1.2	100	gateway Status
	101
84.2	102	[[image:image-20220526090446-3.png\|\|height="653" width="1218"]]
1.2	103
	104	gateway Status
	105
86.6	106
9.1	107	= 3. Gateway Registration for Basics Station =
1.2	108
9.1	109	== Introduction ==
	110
	111	The [[Semtech Basic Station>>url:https://doc.sm.tc/station/]] backend implements the [[LNS protocol>>url:https://doc.sm.tc/station/tcproto.html]]. It exposes a WebSocket handler to which Basic Station powered gateways can connect.
	112
	113	ChirpStack Open-Source LoRaWAN® Network Server needs to set up a configuration that can use Semtech BasicStation.
	114
	115	Below list the support products and Requirements:
	116
	117	1. LoRaWAN Gateway model: [[LIG16>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/171-lig16.html]], [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]], [[DLOS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]] ,[[LPS8>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/148-lps8.html]]
	118	1. Firmware version since :[[lgw~~-~~-build-v5.4.1651822913>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Test_Firmware/lgw--build-v5.4.1651822913-20220506-1543/]]
	119
	120	How to set up chirpStack Basic Station
	121
	122	Users can check out the ChirpStack Basic Station [[link>>https://www.chirpstack.io/gateway-bridge/backends/basic-station/]] and [[forum>>https://forum.chirpstack.io/search?q=basic%20station]]
	123
	124	What do you need to prepare
	125
	126	A gateway that can access the internet normally
	127
86.7	128
9.1	129	== 3.1 Add Gateway ==
	130
20.2	131	[[image:image-20220524164205-10.png]]
9.1	132
86.8	133
9.1	134	== 3.2 Access the gateway GUI ==
	135
	136	Access the gateway GUI interface of LoRaWAN~-~->LoRaWAN ~-~- Basic Station
	137
20.2	138	[[image:image-20220524164319-11.png]]
9.1	139
	140	User need to Choose the ChirpStack/Senet ~-~- Basic Station , input Server URI and Upload the TLS Certificate
	141
	142	(% class="box" %)
	143	(((
	144	Service Provider ~-~-> Choose the ChirpStack/Senet ~-~- Basic Station
	145
	146	LNS URI ~-~-> Enter the LNS URI address, For example : wss:~/~/xxxx.chirpstack.com:433 or ws:~/~/xxxx.chirpstack.com:3001
	147
	148	LNS TLS trust ~-~-> Upload the TLS Certificate
	149	)))
	150
	151	(% class="wikigeneratedid" %)
20.2	152	[[image:image-20220524164341-12.png]]
9.1	153
86.9	154
9.1	155	== 3.3 Start Station ==
	156
	157	When the user has finished the configuration, Please click Sace&Apply to start station to connect ChirpStack
	158
86.10	159
9.1	160	== 3.4 Successful Connection ==
	161
	162	If user completes the above steps, which will see live date in the ChirpStack.
	163
23.2	164	[[image:image-20220524164448-13.png]]
9.1	165
86.11	166
10.2	167	== 3.5 Trouble Shooting ==
9.1	168
	169	User can check the station log in the logread/system log page.
	170
23.2	171	[[image:image-20220524164514-14.png]]
9.1	172
86.13	173
9.1	174	and recode the station log in the system/Recode log page.
	175
23.2	176	[[image:image-20220524164541-15.png]]
9.1	177
86.12	178
1.2	179	= 4. Downlink =
	180
	181	== 4.1 Chirpstack Downlink Note ==
	182
63.2	183	[[image:image-20220525101223-9.png]]
1.2	184
	185	Convert the data to Base64
	186
86.14	187
84.2	188	[[image:image-20220526090748-4.png]]
1.2	189
	190	Check ChripStack downlink DataRate
	191
86.15	192
65.2	193	[[image:image-20220525101326-11.png]]
1.2	194
	195	Make sure the RX2DR is the same in the end node
	196
86.16	197
1.2	198	== 4.2 Loraserver Downlink Note ==
	199
	200	User can use MQTT to send downlink payload to ChirpStack to perform downstream to LoRaWAN End
	201
1.5	202	(((
1.2	203	Below is examples:
1.5	204	)))
1.2	205
1.4	206	(% class="box" %)
	207	(((
	208	Connect to your server via MQTT：
	209	MQTT Client ID: Any
	210	Protocol：mqtt/tcp Server IP：loraserver_ip:1883
1.2	211	User name: User name Password: password
1.4	212	)))
1.2	213
65.2	214	[[image:image-20220525101401-12.png]]
1.2	215
1.5	216	(((
1.2	217	MQTT Connect to ChirpStack
86.17	218
	219
1.5	220	)))
1.2	221
1.5	222	(((
1.2	223	After connect
1.5	224	)))
1.2	225
1.4	226	(% class="box" %)
	227	(((
	228	Subscribe : Format：application/ID/device/ Device EUI/rx
1.2	229	Example: application/7/device/00aedb3da649cb23/rx
1.4	230	)))
1.2	231
1.4	232	(% class="box" %)
	233	(((
	234	Publish:
1.2	235	Format: Top: application/ID/device/ Device EUI/tx
	236	Payload: {"confirmed":true or false,"fPort":XX,"data":"xxxx"}
	237	Example: Top: application/7/device/00aedb3da649cb23/tx
	238	Payload: {"confirmed":true,"fPort":2,"data":"AwEB"}
1.4	239	)))
1.2	240
66.2	241	[[image:image-20220525101436-13.png]]
1.2	242
	243	MQTT Connect to ChirpStack
	244
1.4	245	(((
	246	(% style="color:red" %)Note: Chirpstack use base64 to downlink, so need to convert the downlink payload from HEX to base64 [[https:~~/~~/base64.us/>>url:https://base64.us/]]
	247	)))
1.2	248
67.2	249	[[image:image-20220525101505-14.png]]
1.2	250
	251	Choose to Use Hex for Encode
	252
	253	If we want send downstream hex 030101 to end node, the BASE64 payload is AwEB
	254
68.2	255	[[image:image-20220525104025-15.png]]
1.2	256
1.5	257	(((
1.2	258	Downlink payload encode javescript code: 可以在网站上运行以下Javsscript代码：
1.5	259	)))
1.2	260
1.4	261	(% class="box" %)
	262	(((
	263	function sha1_to_base64(sha1)
1.2	264	{
	265	var digits="ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
	266	var base64_rep = "";
	267	var cnt = 0;
	268	var bit_arr = 0;
	269	var bit_num = 0;
1.5	270	\\ for(var n = 0; n < sha1.length; ++n)
1.2	271	{
	272	if(sha1[n] >= 'A' && sha1[n] <= 'Z')
	273	{
	274	ascv = sha1.charCodeAt(n) - 55;
	275	}
	276	else if(sha1[n] >= 'a' && sha1[n] <= 'z')
	277	{
	278	ascv = sha1.charCodeAt(n) - 87;
	279	}
	280	else
	281	{
	282	ascv = sha1.charCodeAt(n) - 48;
	283	}
1.5	284	\\ bit_arr = (bit_arr << 4) \| ascv;
1.2	285	bit_num += 4;
	286	if(bit_num >= 6)
	287	{
1.4	288	bit_num -= 6;
1.2	289	base64_rep += digits[bit_arr >>> bit_num];
1.4	290	bit_arr &= ~~(-1 << bit_num);
1.2	291	}
	292	}
1.5	293	\\ if(bit_num > 0)
1.2	294	{
	295	bit_arr <<= 6 - bit_num;
	296	base64_rep += digits[bit_arr];
	297	}
1.5	298	\\ var padding = base64_rep.length % 4;
	299	\\ if(padding > 0)
1.2	300	{
	301	for(var n = 0; n < 4 - padding; ++n)
	302	{
	303	base64_rep += "=";
	304	}
	305	}
	306	return base64_rep;
	307	}
1.5	308	\\console.log(sha1_to_base64("data"));
	309	\\data is downlink payload required by end node.
1.4	310	e.g console.log(sha1_to_base64("030101"));
	311	result: AwEB
1.2	312	AwEB is the 0x030101's base 64 Encode.
1.5	313	\\e.g console.log(sha1_to_base64("030000"));
1.4	314	result: AwAA
	315	AwAA is 0x030000's base 64 Encode.
	316	)))
1.2	317
	318	== 4.3 Add the decode function in Chirpstack for the payload ==
	319
	320	User enters the payload code according to the steps.
	321
69.2	322	[[image:image-20220525104051-16.png]]
1.2	323
70.2	324	[[image:image-20220525104155-17.png]]
1.2	325
	326
84.2	327	[[image:image-20220526091602-5.png]]
	328
86.2	329	[[image:image-20220526091801-6.png]]
1.2	330
	331	= 5. Multiply Uplink in ChirpStack =
	332
1.4	333	(((
1.2	334	nbtrans field is the value to determine the re-transmission time for unconfirmed uplink data.
1.4	335	)))
1.2	336
1.4	337	(((
1.2	338	ChirpStack will auto adjust nbtrans according to uplink rssi. [[link to source>>url:https://github.com/brocaar/chirpstack-network-server/blob/master/internal/adr/adr.go]]
1.4	339	)))
1.2	340
86.2	341	[[image:image-20220526091912-7.png]]
1.2	342
1.5	343	(((
1.2	344	nbtrans is a field of ADR message, in unconfirm mode, it tells end node how many time it needs to transmit for every frame.
1.5	345	)))
1.2	346
76.2	347	[[image:image-20220525104359-21.png]]
1.2	348
1.4	349	(((
1.2	350	Above behaviour will cause the platform shows below two cases of error:
1.4	351	)))
1.2	352
1.4	353	(((
1.2	354	Error of duplicate Frame Counter
1.4	355	)))
1.2	356
76.2	357	[[image:image-20220525104437-22.png]]
1.2	358
	359	Duplicate transmission in short time
	360
76.2	361	[[image:image-20220525104502-23.png]]
1.2	362
	363	== 5.1 Solution ==
	364
	365	This example uses the Windows version as a template, other versions can refer to this. Similiar reference: [[https:~~/~~/confluence.alitecs.de/plugins/servlet/mobile?contentId=79790102#content/view/79790102>>url:https://confluence.alitecs.de/plugins/servlet/mobile?contentId=79790102#content/view/79790102]]
	366
1.5	367	(((
1.2	368	~1. Install the GO compilation environment: Download the corresponding version of the Go compiler at [[https:~~/~~/go.dev/dl/>>url:https://go.dev/dl/]] and install it.
1.5	369	)))
1.2	370
79.2	371	[[image:image-20220525104532-24.png]]
1.2	372
	373	installation path:
	374
79.2	375	[[image:image-20220525104554-25.png]]
1.2	376
1.5	377	(((
1.2	378	2. Environment variable settings:.
1.5	379	)))
1.2	380
1.5	381	(((
1.2	382	1) Open Computer -> Properties -> Advanced System Settings -> Environment Variables and add a "new" system variable:
1.5	383	)))
1.2	384
1.5	385	(((
1.2	386	2)Set the variable name GOROOT and the variable value C:\Go\ (installation directory)
1.5	387	)))
1.2	388
43.2	389	[[image:image-20220524165433-33.png]]
1.2	390
	391	3)Modify the system variable Path and add C:\Go\bin\:
	392
43.2	393	[[image:image-20220524165452-34.png]]
1.2	394
	395	User variable setting file generation directory: D:\go:
	396
43.2	397	[[image:image-20220524165517-35.png]]
1.2	398
	399	3. Modify the ADR configuration file according to your own needs, adr.setting.go is an example of the ADR configuration file.
	400
	401	The name of the plugin: Example ADR plugin:
	402
48.2	403	[[image:image-20220524165540-36.png]]
1.2	404
	405	Set Nbtrans: Nbtrans=1 (Nbtrans is the number of retransmissions, if it is 1, no retransmission, it is recommended to be 1). To enable it, you need to uncomment.
	406
48.2	407	[[image:image-20220524165557-37.png]]
1.2	408
	409	4. Compile the ADR configuration file and generate the exe file.
	410
	411	1) Create a folder named adr-setting
	412
	413	2) Open the adr-setting folder
	414
	415	3) Put adr.setting.go in this folder.
	416
	417	4) Open the computer cmd and run the following commands in sequencecd adr-setting
	418
	419	go mod init adr-setting
	420
	421	go get github.com/brocaar/chirpstack-network-server/v3/adr
	422
	423	go get github.com/hashicorp/go-plugin
	424
	425	go get adr-setting
	426
	427	go build
	428
	429	5) Finally generate this file：
	430
48.2	431	[[image:image-20220524165623-38.png]]
1.2	432
	433	5. Add the plugin and run the plugin.
	434
1.5	435	(((
1.2	436	The exe file generated in the previous step is placed in the same root directory as chirpstack-network-server.toml, and the ADR plugin is added to the toml file. The location of the addition is as follows:
1.5	437	)))
1.2	438
48.2	439	[[image:image-20220524165641-39.png]]
1.2	440
1.4	441	(((
1.5	442	(((
1.2	443	For example: adr_plugins=[“adr-setting”]
1.4	444	)))
1.5	445	)))
1.2	446
1.4	447	* (((
1.5	448	(((
1.4	449	Adding a single plugin format is adr_plugins=["filename"]
	450	)))
1.5	451	)))
1.2	452
1.4	453	* (((
1.5	454	(((
1.4	455	Adding multiple plugins The format is adr_plugins=["file name 1", "file name 2",...]
	456	)))
1.5	457	)))
1.2	458
1.4	459	(((
1.5	460	(((
1.2	461	Finally, re-run chirpstack-network-server.exe, and then select the plugin you just compiled in Device-profiles,
1.4	462	)))
1.5	463	)))
1.2	464
79.2	465	[[image:image-20220525104647-26.png]]
1.2	466
	467	Finish.
	468
	469	= 6. Trouble Shooting =
	470
	471	== 6.1 MIC Mismatch or MIC Failed ==
	472
1.4	473	(((
1.2	474	When the device is registered or the device is working normally, the problem of MIC mismatch and MIC failed occurs.
1.4	475	)))
1.2	476
1.4	477	(((
1.2	478	Under normal circumstances, users need to change the APPKEY to solve this problem.
1.4	479	)))

Wiki source code of Notes for ChirpStack

Applications

Navigation