Wiki source code of nodered_Install

Version 9.1 by Herong Lu on 2022/05/19 10:52

Show last authors
1 Click the link to jump to the official installation instructions of nodered
2
3 [[https:~~/~~/nodered.org/docs/getting-started/>>https://nodered.org/docs/getting-started/]]
4
5 == Install according to your operating system ==
6
7 [[image:微信图片_20220519095320.png]]
8
9 == The following is a local linux (CentOS) operating system installation as an example ==
10
11 [[image:微信图片_20220519101243.png]]
12
13 [[image:image-20220519101800-1.png]]
14
15 == Paste into the command line interface and run, ==
16
17 == Wait for the installation to complete ==
18
19 [[image:image-20220519102228-2.png]]
20
21 == Verify that the installation was successful ==
22
23 Type in the command line interface  node-red 
24
25 The following information appears to prove that the installation has been successful
26
27 [[image:image-20220519103318-3.png]]
28
29 == Login to nodered interface ==
30
31 Enter your public IP address followed by the port number 1880
32
33 example:[[http:~~/~~/xxx.xx.xx.xx:1880/>>http://119.91.62.30:1880/]]
34
35 [[image:image-20220519104115-4.png]]
36
37
38 == If you want to start nodered as a background process ==
39
40 Type in the command line interface  nohup node-red &
41
42 It will prompt after startup
43
44 [[image:image-20220519104601-5.png]]
45
46 After seeing the above information, press enter
47
48 Type in the command line  exit
49
50 The above is the installation and startup process of nodered. If you don't understand anything, you can go to the nodered official website. There are installation instructions for various systems. The address has a link at the top