Wiki source code of Monitor & Remote Access Gateway

Version 103.1 by Kilight Cao on 2025/01/09 15:27

version	line-number	content
30.2	1	Table of Contents:
25.6	2
1.1	3	{{toc/}}
	4
25.6	5
	6
25.7	7
81.1	8	= 1. Dragino Platform Monitor =
1.1	9
	10
87.1	11	Below list the support products and Requirements:
	12
90.1	13	1. LoRaWAN Gateway model: [[LG308N>>doc:Main.User Manual for All Gateway models.LG308N - LoRaWAN Gateway User Manual.WebHome]], [[DLOS8N>>doc:Main.User Manual for All Gateway models.DLOS8N.WebHome]],[[LPS8N>>doc:Main.User Manual for All Gateway models.LPS8N - LoRaWAN Gateway User Manual.WebHome]],[[LPS8v2>>doc:Main.User Manual for All Gateway models.HP0C.WebHome]],[[MS48-LR>>doc:Main.User Manual for All Gateway models.MS48-LR_LoRaWAN_To_Modbus_Gateway.WebHome]]
87.1	14
97.1	15	The LG308,DLOS8N,LPS8N supports remote platform monitor functionality ,Since firmware: [[lgw~~-~~-build-v5.4.1735869581>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/lgw--build-v5.4.1735869581-20250103-1003/]]
87.1	16
97.1	17	The LPS8v2,MS48-LR supports remote platform monitor functionality,Since software version dragino-ui : 2024-12-15
87.1	18
90.1	19
79.1	20	Once you have received your gateway and want to manage your gateway, you need to perform the following steps:
	21
	22
95.1	23	== 1.1 Create an account ==
79.1	24
90.1	25	Contact: (% style="color:blue" %)support@dragino.cc
79.1	26
	27	We will create a gateway management platform for you.Once created we will give you a platform and you will need to enter a password and then your gateway management platform will be created.
	28
103.1	29	[[image:image-20250109152734-1.png\|\|height="530" width="1331"]]
79.1	30
101.1	31	== 1.2 Configure gateway ==
79.1	32
	33
87.1	34	To access the (% style="color:blue" %)System~-~->Remote Mgmt(%%) interface of the gateway, you can select "(% style="color:blue" %)Enable(%%)" and customize the owner,then click on "(% style="color:blue" %)Save&Apply(%%)".
	35
100.1	36	~1. Click "(% style="color:blue" %)Enable(%%)" ~-~-~-~--> If this option is checked, the gateway will enable Remote Platform Monitor
	37
101.1	38	2. Configure the (% style="color:blue" %)Owner(%%) ~-~-~-~--> Fill in the Owne given by the manufacturer, that's the only one.
100.1	39
	40	3. Click "(% style="color:blue" %)Save&Apply(%%)"
	41
	42	(% style="color:red" %)Note: If the Owner parameter is set to Dragino, the device will be registered with the Dragino account
	43
99.1	44	[[image:image-20250107151805-1.png]]
87.1	45
	46
	47	Check the remote platform connection status
	48
	49	[[image:image-20241216162640-2.png]]
	50
	51	After the above configuration is complete, wait for 2-3 minutes, the gateway will be displayed on the dashboard
	52
	53
101.1	54	== 1.3 Check the dashboard. ==
87.1	55
79.1	56	Check if you can see your gateway information in the dashboard
	57
87.1	58	[[image:image-20241216163331-3.png\|\|height="578" width="1258"]]
79.1	59
87.1	60
79.1	61	And click on your device to go to the next level to see if the gateway specific information is displayed properly
	62
	63
90.1	64	Chart function introduction:
79.1	65
90.1	66	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__1.Gateway information: __(%%) Will show Gateway time, uptime, mac address, lorawan status, model and other gateway information
79.1	67
90.1	68	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__2. Line chart: __(%%) Record free RAM, used Disk, and CPU load of the current gateway
79.1	69
90.1	70	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__3. Auto-Update: __(%%) After clicking, the gateway will be updated
	71
92.1	72	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__4. Refresh: __(%%) After clicking, the gateway will immediately update the data information and displays the current package version on the dashboard
90.1	73
	74	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__5. Reboot gateway: __(%%) After clicking, the gateway will reboot.
	75
	76	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__6. Get Latest Log File: __(%%) After clicking, the gateway records a log for 5 minutes and uploads it to the dashboard
	77
	78	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__7. Change Server Address: __(%%) Add the lorawan server address and the gateway will be configured and modified
	79
	80	The format is as follows:
	81
	82	{"action":"set_server1_address","server_address":"10.130.2.123"}
	83
	84	(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)__8. Download Dragino Gateway log: __(%%) After you complete "Get Latest Log File", Click "Click me" to download gateway logs
	85
	86
	87	[[image:image-20241216170144-6.png\|\|height="596" width="1258"]]
	88
	89
	90	[[image:image-20241216170119-5.png\|\|height="249" width="1259"]]
	91
	92
	93
93.1	94	= 2. Monitor Gateway via ThingsSpeak =
79.1	95
	96
1.1	97	This introduction shows how to use a script to monitor the gateway. The video link for this instruction is: [[https:~~/~~/youtu.be/8PieIwfSF_g>>url:https://youtu.be/8PieIwfSF_g]]
	98
51.2	99
29.2	100	[[image:image-20220531155018-18.png]]
1.1	101
8.3	102
94.1	103	== 2.1 Steps ==
1.1	104
30.2	105
1.1	106	* Create account in ThingsSpeak and creat channel.
73.2	107
1.1	108	* Download script from dragino site and move it to properly directory
	109
	110	(% class="box infomessage" %)
	111	(((
	112	root@dragino-1baf44:~~# wget [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh]]
	113	Downloading '[[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh'>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh']]
	114	Connecting to 162.241.22.11:80
	115	Writing to 'monitor_gateway.sh'
	116	monitor_gateway.sh 100% \|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*\| 1860 0:00:00 ETA
	117	Download completed (1860 bytes)
	118	root@dragino-1baf44:~~# chmod +x monitor_gateway.sh;mv monitor_gateway.sh /usr/bin/
	119	root@dragino-1baf44:~~#
	120	root@dragino-1baf44:~~#
	121	)))
	122
44.2	123
51.2	124
1.1	125	* change the script monitor_gateway.sh with properly users setting:
	126
	127	(% class="box infomessage" %)
	128	(((
	129	USER='xxxxx' # user name in your thinkspeak ~-~-> Profile
	130	PASS='xxxxx' #MQTT_API_KEY in your thinkspeak ~-~-> Profile
	131	CHAN_ID='xxxx' #Channel ID of the channel for this gateway
	132	CHAN_KEY='xxxxx' #Channel Write API of the channel for this gateway
	133	)))
	134
	135
51.2	136
44.2	137	* run (% style="color:blue" %)/usr/bin/monitor_gateway.sh(%%) to test if upload is good.
1.1	138
44.2	139	* Add monitor_gateway.sh to cron work (% style="color:blue" %)/etc/crontabs/root(%%) to make this script runs perdiocally, below is an example to update every 20 minutes
	140
1.1	141	(% class="box infomessage" %)
	142	(((
7.1	143	# For details see man 4 crontabs
1.1	144	# Example of job definition:
	145	# .~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~- minute (0 - 59)
	146	# \| .~-~-~-~-~-~-~-~-~-~-~-~-- hour (0 - 23)
	147	# \| \| .~-~-~-~-~-~-~-~-~-~- day of month (1 - 31)
	148	# \| \| \| .~-~-~-~-~-~-- month (1 - 12) OR jan,feb,mar,apr ...
	149	# \| \| \| \| .~-~-~-~- day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue,wed,thu,fri,sat
	150	# \| \| \| \| \|
	151	# * * * * * user-name command to be executed
	152	#/10 * * * checklog
	153	~* 23 * * * /etc/init.d/auto_update start
2.1	154	/20 * * * /usr/bin/monitor_gateway.sh
1.1	155	)))
	156
	157	* Reboot device.
	158
94.1	159	== 2.2 Monitor Public IP ==
30.2	160
71.2	161
1.1	162	The monitor_gateway.sh has been updated to upload the public ip of the device as well.
	163
	164	User can find the public ip in field7, the chart is not able to show the complete public ip, user can check that in the export.
	165
44.2	166
73.2	167	[[image:image-20220531145559-2.png\|\|height="658" width="1233"]]
1.1	168
	169	Find Public IP
	170
	171
93.1	172	= 3. Remote Access via Remote.it. =
1.1	173
	174
	175	Remote.it for remote access is available in the latest Dragino firmware for gateway. For security concern, the remote.it only available base on end user demand.
	176
	177
30.2	178	(% style="color:red" %)Important Notice:
	179
1.1	180	* Remote.it access will give full control of your device to remote support.
73.2	181
37.1	182	* The Remote.it allows Dragino Support to remote access to the device, If user want to access himself, it need to sign up for an remote.it account.
73.2	183
51.1	184	* For how to use remote.it for (% style="color:blue" %)general remote control(%%), please see : [[Remoteit user instruction for Dragino Gateway>>https://www.remote.it/getting-started/dragino]].
73.2	185
44.2	186	* For Quick add remote.it to (% style="color:blue" %)Dragino for remote debug(%%), please see below:
1.1	187
44.2	188	(% style="color:blue" %)1. Install the Remote.it software
33.1	189
44.10	190	Users can directly click "Install" on the Web UI to install Remote. it.
34.1	191
44.2	192
41.1	193	[[image:image-20220725134300-1.png\|\|height="438" width="905"]]
	194
42.1	195
37.1	196
44.2	197	(% style="color:blue" %)2. Enter the license key
	198
44.6	199	Users need to enter the license key in the box under "2. Register" section and click the "Save" button and "Register" button.
37.1	200
44.1	201	(% style="color:red" %)When the user enters this license key, Dragino support will have access to your gateway.
39.1	202
44.2	203
37.1	204	(% class="box infomessage" %)
	205	(((
72.1	206	fd173d1d-faed-493e-a868-c511a38aba45
37.1	207	)))
	208
75.1	209	[[image:image-20230607085305-1.png\|\|height="555" width="993"]]
37.1	210
	211
	212
44.2	213	(% style="color:blue" %)3. Connect and tell us your device ID or Hostname
37.1	214
44.2	215	Users can view the device ID or Hostname of the gateway on (% style="color:red" %)System ~-~-> System Overview(%%) interface.Such as : dragino-1ef9ac
	216
	217
37.1	218	[[image:image-20220725115720-2.png\|\|height="658" width="900"]]
	219
	220
93.1	221	== 3.1 How to save the registered remote after the gateway's firmware update. ==
57.2	222
44.2	223
64.1	224	Before version [[lgw~~-~~-build-v5.4.1668240318-20221112-1606>>http://repo.dragino.com/release/miscellaneous/remoteit/dragino-lgw--v5.4.1668240318-squashfs-sysupgrade.bin]], once the gateway firmware is upgraded the remote configuration is gone.
49.1	225
62.1	226	This issue is now corrected:
	227
	228
	229
94.1	230	=== The gateway version is lower than lgw~-~-build-v5.4.1668240318-20221112-1606: ===
62.1	231
	232
64.2	233	~1. upload the [[backup file>>http://repo.dragino.com/release/miscellaneous/remoteit/backup.tar.gz]] to update the configuration.
	234
62.1	235	[[image:image-20221112162644-4.png]]
	236
	237
	238
64.2	239	2. Check the 'Preserver Settings' check box when you upgrade the gateway with the firmware.
	240
62.1	241	[[image:image-20221112162543-2.png]]
	242
	243
	244
93.1	245	=== The gateway version is greater or equal to lgw~-~-build-v5.4.1668240318-20221112-1606: ===
62.1	246
	247
	248
64.2	249	~1. Only to do: Check the 'Preserver Settings' check box when you upgrade the gateway with the firmware.
	250
62.1	251	[[image:image-20221112162547-3.png]]
	252
	253
93.1	254	== 3.2 How to register hp0d with Remote.it ==
62.1	255
	256
73.2	257	(% style="color:blue" %)Prerequisites:
49.1	258
	259	Users must have an account and APP for remote.it
	260
71.1	261	[[https:~~/~~/app.remote.it>>https://app.remote.it]]
49.1	262
	263
93.1	264	=== (% style="color:blue" %)1. Click "+" in the APP to add a device(%%) ===
49.1	265
64.2	266
49.1	267	Then click Add "Linux & Raspberry Pi" and the APP will generate a command to register the device.
	268
	269
	270	[[image:image-20220815173938-1.jpeg\|\|height="574" width="919"]]
	271
	272
51.2	273
93.1	274	=== (% style="color:blue" %)2. Copy the register device command(%%) ===
49.1	275
	276
	277	[[image:image-20220815173944-2.jpeg\|\|height="556" width="923"]]
	278
	279
51.2	280
93.1	281	=== (% style="color:blue" %)3. Enter the command copied from the previous step on the HP0D Linux command line(%%) ===
49.1	282
51.2	283
49.1	284	[[image:image-20220815173951-3.jpeg\|\|height="424" width="1147"]]
	285
	286
51.2	287
93.1	288	=== (% style="color:blue" %)4. Check whether the device is successfully registered on the Remote.it APP(%%) ===
49.1	289
	290
	291	[[image:image-20220815173958-4.jpeg\|\|height="580" width="964"]]
	292
	293
93.1	294	== 3.3 How to register the gateway with Remote.it via SSH Access for Linux console ==
57.2	295
57.1	296
73.2	297	(% style="color:blue" %)Prerequisites:
57.1	298
71.1	299	Users must have an account and APP for remote.it
	300
	301	[[https:~~/~~/app.remote.it>>https://app.remote.it]]
	302
	303	For detailed examples, please see: [[OpenWrt How to Connect Guide (remote.it)>>url:https://www.remote.it/getting-started/openwrt]]
	304
	305
93.1	306	=== (% style="color:blue" %)1. Click "+" in the APP to add a device(%%) ===
71.1	307
	308
	309	Then click Add "OpenWrt" and the APP will generate a command to register the device.
	310
	311	[[image:image-20230320110123-4.png\|\|height="657" width="1191"]]
	312
	313
	314
93.1	315	=== (% style="color:blue" %)2. Copy the register device command(%%) ===
71.1	316
72.3	317
71.1	318	[[image:image-20230320110309-5.png\|\|height="635" width="1197"]]
	319
	320
	321
93.1	322	=== (% style="color:blue" %)3. Enter the command copied from the previous step on the gateway Linux command line(%%) ===
72.3	323
71.1	324
72.4	325	(% class="wikigeneratedid" id="H" %)
	326	[[image:image-20230320105212-1.png\|\|height="758" width="820"]]
71.1	327
	328
72.4	329
93.1	330	=== (% style="color:blue" %)4. Check whether the device is successfully registered on the Remote.it APP(%%) ===
71.1	331
72.3	332
71.1	333	[[image:image-20230320112057-6.png\|\|height="603" width="1135"]]
	334
	335
93.1	336	== 3.4 Trouble Shooting ==
71.1	337
	338
93.1	339	=== 1. What should users do when gateway Remote.it installation fails ===
57.1	340
57.4	341
57.1	342	[[image:image-20220907162028-4.png\|\|height="564" width="1148"]]
	343
	344
57.4	345	(% style="color:blue" %)Step 1: (%%)Users can download the archive and upload it to the gateway: [[attach:backup.tar.gz\|\|target="_blank"]]
57.1	346
	347	[[image:image-20220907161050-2.png]]
	348
	349
	350
57.4	351	(% style="color:blue" %)Step 2: (%%)Back to the Remote.it screen, and click "Install" again.
	352
57.1	353	[[image:image-20220907161352-3.png]]
	354
	355
57.4	356	(% style="color:blue" %)Step 3:(%%) Follow the [[Remoteit user instruction for Dragino Gateway>>https://www.remote.it/getting-started/dragino]] steps to reconfigure
57.1	357
	358
93.1	359	= 4. RSSH Introduction =
1.1	360
31.3	361
2.1	362	Reverse SSH for remote access is available in the latest Dragino firmware for gateway. For security concern, the RSSH only available base on end user demand.
1.1	363
44.2	364	(% style="color:red" %)Important Notice:
1.1	365
2.2	366	(% class="box warningmessage" %)
2.1	367	(((
	368	RSSH access will give full control of your device to remote support. Please remove sensitivity info before perform this
73.1	369	This RSSH allow Dragino Support Team to remote access to customer's device. Customer is not able to remote access it via Dragino Server.
	370
	371	If user want to access himself, he need to set up the RSSH server himself.
2.1	372	)))
	373
	374
44.6	375	Below gateway support reverse SSH access:
	376
4.1	377	* Firmware Version > lgw~-~-build-v5.4.1618196981-20210412-1111 [[Firmware Download>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/]]
2.1	378	* LG01N, OLG01N (Note: LG01-P LG01-S doesn't support)
	379	* LG02, OLG02
	380	* LG308, DLOS8
	381	* LPS8
	382	* LIG16
	383	* MS14 series if installed with the same firmware.
	384
93.1	385	== 4.1 End User Guide to use SSH access ==
71.2	386
	387
4.1	388	Go to this the Reverse SSH page as below:
1.1	389
78.1	390	[[image:image-20231107200442-2.png\|\|height="684" width="973"]]
44.3	391
1.1	392
4.1	393	Get the RSSH configure page
1.1	394
78.1	395	[[image:image-20220531152815-14.png]]
11.3	396
4.1	397	Connection OK.
	398
78.1	399	* (% style="color:#037691" %)ConnectionType(%%): Select a type
	400	* (% style="color:#037691" %)Login ID(%%): Input the rssh server minimal ssh user
	401	* (% style="color:#037691" %)Host Address(%%): Input rssh server public IP address/domain name
	402	* (% style="color:#037691" %)Connect at Startup(%%) : Choose to enable connect once the device is powered.
	403	* (% style="color:#037691" %)Network Keys(%%): Click the Generate keys to generate the keys and download / mail it to Dragino support so Dragino can prepare the remote access to
12.2	404
4.1	405	After doing above, please download and mail the public keys to Dragino support and wait for our mail for the valid host port. Input the valid host port got from our support and click connect so we can remote access to your gateway.
	406
5.1	407
93.1	408	== 4.2 Set Up RSSH Server ==
30.5	409
44.3	410
5.2	411	Advance administrator can config a SSH server to provide support their end user themselves., Steps as below
5.1	412
	413
9.7	414
93.1	415	=== (% style="color:blue" %)Step 1 : Download the SSH service code(%%) ===
5.1	416
30.5	417
	418	1). git clone [[https:~~/~~/github.com/dragino/rssh-server.git>>url:https://github.com/dragino/rssh-server.git]] rssh-server
	419
13.2	420	[[image:image-20220531150750-5.png]]
5.1	421
	422
30.5	423	2). cd rssh-server; sudo make ~-~--> to Generate the execute file：rssh_serv
	424
14.2	425	[[image:image-20220531150811-6.png]]
5.1	426
	427
	428	Debug :
	429
14.3	430	(((
	431	(% class="box" %)
	432	(((
	433	if you git fail. ~-~-> (% style="color:#037691" %)sudo: git: command not found(%%).
	434	please install git. ~-~-> (% style="color:#037691" %)yum install git -y or apt-get install git -y(%%).
	435	if you make error 127,it (% style="color:#037691" %)lack of gcc(%%).
	436	please install gcc. ~-~-> (% style="color:#037691" %)yum install gcc(%%).
	437	)))
	438	)))
5.1	439
15.2	440	[[image:image-20220531151516-7.png]]
5.1	441
	442
15.2	443	(((
	444	(% class="box" %)
	445	(((
	446	if you make a fatal error : sqlite3.h,it (% style="color:#037691" %)lack of sqlite3(%%).
	447	please insatell sqlite3.
	448	)))
	449	)))
5.1	450
16.2	451	[[image:image-20220531151628-8.png]]
5.1	452
	453
44.8	454	(% style="color:blue" %)How to install Sqlit3:
5.1	455
5.2	456	(% class="box infomessage" %)
	457	(((
44.3	458	~ Step 1: Download the SQLit3 installation package
30.5	459	sudo wget [[https:~~/~~/www.sqlite.org/2021/sqlite-autoconf-3350400.tar.gz>>url:https://www.sqlite.org/2021/sqlite-autoconf-3350400.tar.gz]]
16.4	460
44.3	461	Step 2: tar the SQLit3 installation package
5.1	462	sudo tar -zxvf sqlite-autoconf-3350300.tar.gz
30.5	463
44.3	464	Step 3: Generate the makefile
5.1	465	cd sqlite-autoconf-3350300/;./configure
30.5	466
44.3	467	Step 4: Compile makefile
5.1	468	sudo make
30.5	469
44.3	470	Step 5: Install makefile
5.1	471	sudo make install
30.5	472
	473	Check:
44.3	474	cd /usr/local/bin;ls -al ~-~-> Check to see if there is a file for sqlite3
5.2	475	cd sqlite-autoconf-3350300/;./sqlite3 test.db ~-~-> Test whether the sqlite3 was installed successfully
30.5	476
	477	debug:
5.1	478	If you get the imformation that is SQLite header and source version mismatch, when you execute./sqlite3 test.db.
	479	Please execute the command /sbin/ldconfig.
	480	After that execute the command ./sqlite3 test.db again.
5.2	481	)))
	482
	483
	484
93.1	485	=== (% style="color:blue" %)Step 2 : Install and run the RSS service(%%) ===
5.2	486
30.5	487
	488	1). install database for /var/rsshdb.sqlite3 and Server development port for 3721(The default is 3721)
	489
5.2	490	user must enter the root account and run the following commands
	491
	492	(% class="box infomessage" %)
	493	(((
44.9	494	**$ ./create_sqlite3_db.sh
5.2	495	$ ./rssh_serv -p 3721 2>&1 &
44.9	496	$ ps -ef \| grep rssh_serv check 3721 port**
5.2	497	)))
	498
18.2	499	[[image:image-20220531151958-10.png]]
5.2	500
	501
	502	Debug:
	503
	504	{{{ Check /var/rsshdb.sqlite3 --> ls /var/rsshdb.sqlite3
	505	Check ls /var/rsshdb.sqlite3 --> sudo chmod 777 rssh_serv
5.1	506	}}}
	507
5.2	508	{{{ if fail to open dpvlry or to bind to it
	509	please kill rssh_serv,and run ./rssh_serv -p 3721 2>&1 & again
	510	}}}
5.1	511
5.2	512
	513
93.1	514	=== (% style="color:blue" %)Step 3 : Create a minimal SSH user (reverse SSH proxy for the gateway)(%%) ===
5.2	515
30.5	516
5.2	517	(% class="box infomessage" %)
	518	(((
30.5	519	1): sudo useradd XXXXX (custom user name)
	520	2): sudo passwd xxxxxx
	521	3): cp /bin/bash /bin/rbash
	522	4): sudo nano /etc/passwd ~-~-> Change /bin/bash to /bin/rbash
	523	5): sudo nano /home/xxxxx/.bashrc empty it,and input export PATH=$HOME/bin
	524	6): sudo nano /home/xxxxx/.bash_profile empty it,and input export PATH=$HOME/bin
5.2	525	)))
	526
30.5	527	(% style="color:red" %)Now user "XXXXX" is the user with limited permissions of the current system
5.2	528
7.1	529
18.3	530
93.1	531	=== (% style="color:blue" %)Step 4 : Create an authorization key file(%%) ===
7.1	532
	533
30.5	534	1): sudo mkdir /home/xxxxx/.ssh; sudo touch /home/xxxxx/.ssh/authorizedkey
	535
44.12	536
7.1	537	Debug:
	538
	539	{{{ check: sudo ls /home/xxxxx/.ssh/authorizedkey}}}
	540
	541
93.1	542	== 4.3 How does user get the gateway to connect to a user's private server ==
7.1	543
5.2	544
	545
93.1	546	=== (% style="color:blue" %)Step 1 : Come back the gateway web UI to get the gateway Public key(%%) ===
5.2	547
44.3	548
30.5	549	1) in the system ~-~-> (% style="color:#037691" %)Remote Mgmt/span
	550
19.2	551	[[image:image-20220531152419-11.png]]
5.2	552
	553
	554
93.1	555	=== (% style="color:blue" %)Step 2 : Authorization server(%%) ===
30.5	556
	557
7.1	558	Input the Gateway Publickey into user's private server "/home/XXXXX/.ssh/authorized_keys" file.
5.2	559
20.2	560	[[image:image-20220531152549-12.png]]
5.2	561
	562
	563
93.1	564	=== (% style="color:blue" %)Step 3 : Connect private server(%%) ===
30.5	565
	566
7.1	567	This is same as connect Dragino Support Server but just change the server address to customize server address.
5.2	568
21.2	569	[[image:image-20220531152633-13.png]]
5.2	570
	571
	572
93.1	573	=== (% style="color:blue" %)Step 4 : Check Connection(%%) ===
5.2	574
30.5	575
5.2	576	Rssh Host connection Ok
	577
22.2	578	[[image:image-20220531152815-14.png]]
5.2	579
	580
7.1	581	User can use common ps \| grep ssh to check it in the gateway.
5.2	582
23.2	583	[[image:image-20220531152840-15.png]]
5.2	584
	585
	586
93.1	587	=== (% style="color:blue" %)Step 5 : Access the gateway from customized server(%%) ===
30.5	588
	589
7.1	590	Check what gateways link to server.
5.2	591
24.2	592	(% class="box infomessage" %)
	593	(((
44.3	594	$ ./connect-gw.sh -l
24.2	595	)))
5.2	596
24.2	597	[[image:image-20220531153016-16.png]]
5.2	598
	599
	600
7.1	601	Access the gateway
5.2	602
25.2	603	(% class="box infomessage" %)
	604	(((
44.3	605	$ ./connect-gw.sh <GWID>
25.2	606	)))
5.2	607
25.2	608	[[image:image-20220531153219-17.png]]

Wiki source code of Monitor & Remote Access Gateway

Applications

Navigation