Skip to Content
Version 100.1 by Kilight Cao on 2025/01/07 15:58
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8 = 1.  Dragino Platform Monitor =
9
10
11 **Below list the support products and Requirements:**
12
13 1. LoRaWAN Gateway model:  **[[LG308N>>doc:Main.User Manual for All Gateway models.LG308N - LoRaWAN Gateway User Manual.WebHome]]**, **[[DLOS8N>>doc:Main.User Manual for All Gateway models.DLOS8N.WebHome]]**,**[[LPS8N>>doc:Main.User Manual for All Gateway models.LPS8N - LoRaWAN Gateway User Manual.WebHome]]**,**[[LPS8v2>>doc:Main.User Manual for All Gateway models.HP0C.WebHome]]**,**[[MS48-LR>>doc:Main.User Manual for All Gateway models.MS48-LR_LoRaWAN_To_Modbus_Gateway.WebHome]]**
14
15 The LG308,DLOS8N,LPS8N supports remote platform monitor functionality ,Since firmware: **[[lgw~~-~~-build-v5.4.1735869581>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/lgw--build-v5.4.1735869581-20250103-1003/]]**
16
17 The LPS8v2,MS48-LR supports remote platform monitor functionality,Since software version **dragino-ui : 2024-12-15 **
18
19
20 Once you have received your gateway and want to manage your gateway, you need to perform the following steps:
21
22
23 == 1.1 Create an account ==
24
25 Contact: (% style="color:blue" %)**support@dragino.cc**
26
27 We will create a gateway management platform for you.Once created we will give you a platform and you will need to enter a password and then your gateway management platform will be created.
28
29
30 == 1.2 Import Dashboard ==
31
32 Before importing the dashboard we need to download the gateway management dashboard file from GitHub.
33
34 where to get:**[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/blob/main/Gateway%20Management/>>https://github.com/dragino/dragino-end-node-decoder/blob/main/Gateway%20Management/monitor_gateway_dashboard.json]]**
35
36 [[image:https://wiki.thingseye.io/xwiki/bin/download/Main/Gateway%20Management/WebHome/1732848745971-712.png?rev=1.1||alt="1732848745971-712.png"]]
37
38 Once the download is complete we need to import the dashboard into our gateway management account:
39
40 Firstly, we need to open the dashboard module,
41
42 click on the "(% style="color:blue" %)**+**(%%)" in the upper right corner, select "(% style="color:blue" %)**import dashboard**(%%)",
43
44 then we shoud drag the downloaded _dashboard file into the text box.
45
46
47 [[image:https://wiki.thingseye.io/xwiki/bin/download/Main/Gateway%20Management/WebHome/1732849072990-298.png?width=1168&height=549&rev=1.1||alt="1732849072990-298.png"]]
48
49
50 [[image:https://wiki.thingseye.io/xwiki/bin/download/Main/Gateway%20Management/WebHome/1732849454521-821.png?width=1173&height=554&rev=1.1||alt="1732849454521-821.png"]]
51
52
53 == 1.3 Configure gateway ==
54
55
56 To access the (% style="color:blue" %)**System~-~->Remote Mgmt**(%%) interface of the gateway, you can select "(% style="color:blue" %)**Enable**(%%)" and customize the owner,then click on "(% style="color:blue" %)**Save&Apply**(%%)".
57
58 ~1. Click "(% style="color:blue" %)**Enable**(%%)" ~-~-~-~-->  If this option is checked, the gateway will enable Remote Platform Monitor
59
60 2. Configure the (% style="color:blue" %)**Owner**(%%)  ~-~-~-~-->  Fill in the Owne given by the Dragino manufacturer,that's the only one.
61
62 3. Click "(% style="color:blue" %)**Save&Apply**(%%)"
63
64 (% style="color:red" %)Note: If the Owner parameter is set to Dragino, the device will be registered with the Dragino account
65
66 [[image:image-20250107151805-1.png]]
67
68
69 Check the remote platform connection status
70
71 [[image:image-20241216162640-2.png]]
72
73 After the above configuration is complete, wait for 2-3 minutes, the gateway will be displayed on the dashboard
74
75
76 == 1.4 Check the dashboard. ==
77
78 Check if you can see your gateway information in the dashboard
79
80 [[image:image-20241216163331-3.png||height="578" width="1258"]]
81
82
83 And click on your device to go to the next level to see if the gateway specific information is displayed properly
84
85
86 **Chart function introduction:**
87
88 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__1.Gateway information:  __**(%%) Will show Gateway time, uptime, mac address, lorawan status, model and other gateway information
89
90 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__2. Line chart: __**(%%) Record free RAM, used Disk, and CPU load of the current gateway
91
92 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__3. Auto-Update:  __**(%%) After clicking, the gateway will be updated
93
94 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__4. Refresh: __**(%%) After clicking, the gateway will immediately update the data information and displays the current package version on the dashboard
95
96 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__5. Reboot gateway: __**(%%) After clicking, the gateway will reboot.
97
98 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__6. Get Latest Log File: __**(%%) After clicking, the gateway records a log for 5 minutes and uploads it to the dashboard
99
100 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__7. Change Server Address: __**(%%) Add the lorawan server address and the gateway will be configured and modified
101
102 The format is as follows:
103
104 **{"action":"set_server1_address","server_address":"10.130.2.123"}**
105
106 (% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__8. Download Dragino Gateway log: __**(%%) After you complete "Get Latest Log File", Click "Click me" to download gateway logs
107
108
109 [[image:image-20241216170144-6.png||height="596" width="1258"]]
110
111
112 [[image:image-20241216170119-5.png||height="249" width="1259"]]
113
114
115
116 = 2.  Monitor Gateway via ThingsSpeak =
117
118
119 This introduction shows how to use a script to monitor the gateway. The video link for this instruction is: [[https:~~/~~/youtu.be/8PieIwfSF_g>>url:https://youtu.be/8PieIwfSF_g]]
120
121
122 [[image:image-20220531155018-18.png]]
123
124
125 == 2.1  Steps ==
126
127
128 * Create account in ThingsSpeak and creat channel.
129
130 * Download script from dragino site and move it to properly directory
131
132 (% class="box infomessage" %)
133 (((
134 root@dragino-1baf44:~~# wget [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh]]
135 Downloading '[[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh'>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8/Firmware/customized_script/monitor_gateway.sh']]
136 Connecting to 162.241.22.11:80
137 Writing to 'monitor_gateway.sh'
138 monitor_gateway.sh   100% |~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~**|  1860   0:00:00 ETA
139 Download completed (1860 bytes)
140 root@dragino-1baf44:~~# chmod +x monitor_gateway.sh;mv monitor_gateway.sh /usr/bin/
141 root@dragino-1baf44:~~#
142 root@dragino-1baf44:~~#
143 )))
144
145
146
147 * change the script monitor_gateway.sh with properly users setting:
148
149 (% class="box infomessage" %)
150 (((
151 USER='xxxxx'             # user name in your thinkspeak ~-~-> Profile
152 PASS='xxxxx'     #MQTT_API_KEY in your thinkspeak ~-~-> Profile
153 CHAN_ID='xxxx'    #Channel ID   of the channel for this gateway
154 CHAN_KEY='xxxxx'   #Channel Write API  of the channel for this gateway
155 )))
156
157
158
159 * run (% style="color:blue" %)**/usr/bin/monitor_gateway.sh**(%%) to test if upload is good.
160
161 * Add monitor_gateway.sh to cron work (% style="color:blue" %)**/etc/crontabs/root**(%%) to make this script runs perdiocally, below is an example to update every 20 minutes
162
163 (% class="box infomessage" %)
164 (((
165 # For details see man 4 crontabs
166 # Example of job definition:
167 # .~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~- minute (0 - 59)
168 # | .~-~-~-~-~-~-~-~-~-~-~-~-- hour (0 - 23)
169 # | | .~-~-~-~-~-~-~-~-~-~- day of month (1 - 31)
170 # | | | .~-~-~-~-~-~-- month (1 - 12) OR jan,feb,mar,apr ...
171 # | | | | .~-~-~-~- day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue,wed,thu,fri,sat
172 # | | | | |
173 # * * * * * user-name command to be executed
174 #*/10 * * * *  checklog
175 ~* 23 * * *  /etc/init.d/auto_update start
176 */20 * * * *  /usr/bin/monitor_gateway.sh     
177 )))
178
179 * Reboot device.
180
181 == 2.2  Monitor Public IP ==
182
183
184 The monitor_gateway.sh has been updated to upload the public ip of the device as well.
185
186 User can find the public ip in field7, the chart is not able to show the complete public ip, user can check that in the export.
187
188
189 [[image:image-20220531145559-2.png||height="658" width="1233"]]
190
191 Find Public IP
192
193
194 = 3.  Remote Access via Remote.it. =
195
196
197 Remote.it for remote access is available in the latest Dragino firmware for gateway. For security concern, the remote.it only available base on end user demand.
198
199
200 (% style="color:red" %)**Important Notice:**
201
202 * Remote.it access will give full control of your device to remote support.
203
204 * The Remote.it allows Dragino Support to remote access to the device, If user want to access himself, it need to sign up for an remote.it account.
205
206 * For how to use remote.it for (% style="color:blue" %)**general remote control**(%%), please see :  [[Remoteit user instruction for Dragino Gateway>>https://www.remote.it/getting-started/dragino]].
207
208 * For Quick add remote.it to (% style="color:blue" %)**Dragino for remote debug**(%%), please see below:
209
210 (% style="color:blue" %)**1. Install the Remote.it software**
211
212 Users can directly click** "Install"** on the Web UI to install Remote. it.
213
214
215 [[image:image-20220725134300-1.png||height="438" width="905"]]
216
217
218
219 (% style="color:blue" %)**2. Enter the license key**
220
221 Users need to enter the license key in the box under **"2. Register"** section and click the **"Save"** button and** "Register"** button.
222
223 (% style="color:red" %)**When the user enters this license key, Dragino support will have access to your gateway.**
224
225
226 (% class="box infomessage" %)
227 (((
228 **fd173d1d-faed-493e-a868-c511a38aba45**
229 )))
230
231 [[image:image-20230607085305-1.png||height="555" width="993"]]
232
233
234
235 (% style="color:blue" %)**3. Connect and tell us your device ID or Hostname**
236
237 Users can view the device ID or Hostname of the gateway on** (% style="color:red" %)System ~-~-> System Overview(%%)** interface.Such as : dragino-1ef9ac
238
239
240 [[image:image-20220725115720-2.png||height="658" width="900"]]
241
242
243 == 3.1  How to save the registered remote after the gateway's firmware update. ==
244
245
246 Before version [[lgw~~-~~-build-v5.4.1668240318-20221112-1606>>http://repo.dragino.com/release/miscellaneous/remoteit/dragino-lgw--v5.4.1668240318-squashfs-sysupgrade.bin]], once the gateway firmware is upgraded the remote configuration is gone.
247
248 This issue is now corrected:
249
250
251
252 === **The gateway version is lower than** **lgw~-~-build-v5.4.1668240318-20221112-1606:** ===
253
254
255 **~1. upload the [[backup file>>http://repo.dragino.com/release/miscellaneous/remoteit/backup.tar.gz]] to update the configuration.**
256
257 [[image:image-20221112162644-4.png]]
258
259
260
261 **2. Check the 'Preserver Settings' check box when you upgrade the gateway with the firmware. **
262
263 [[image:image-20221112162543-2.png]]
264
265
266
267 === **The gateway version is greater or equal to**  **lgw~-~-build-v5.4.1668240318-20221112-1606:** ===
268
269
270
271 **~1. Only to do: Check the 'Preserver Settings' check box when you upgrade the gateway with the firmware. **
272
273 [[image:image-20221112162547-3.png]]
274
275
276 == 3.2  How to register hp0d with Remote.it ==
277
278
279 (% style="color:blue" %)**Prerequisites:**
280
281 Users must have an account and APP for remote.it
282
283 **[[https:~~/~~/app.remote.it>>https://app.remote.it]]**
284
285
286 === (% style="color:blue" %)**1.  Click "+" in the APP to add a device**(%%) ===
287
288
289 Then click Add "Linux & Raspberry Pi" and the APP will generate a command to register the device.
290
291
292 [[image:image-20220815173938-1.jpeg||height="574" width="919"]]
293
294
295
296 === (% style="color:blue" %)**2.  Copy the register device command**(%%) ===
297
298
299 [[image:image-20220815173944-2.jpeg||height="556" width="923"]]
300
301
302
303 === (% style="color:blue" %)**3.  Enter the command copied from the previous step on the HP0D Linux command line**(%%) ===
304
305
306 [[image:image-20220815173951-3.jpeg||height="424" width="1147"]]
307
308
309
310 === (% style="color:blue" %)**4.  Check whether the device is successfully registered on the Remote.it APP**(%%) ===
311
312
313 [[image:image-20220815173958-4.jpeg||height="580" width="964"]]
314
315
316 == 3.3 How to register the gateway with Remote.it via SSH Access for Linux console ==
317
318
319 (% style="color:blue" %)**Prerequisites:**
320
321 Users must have an account and APP for remote.it
322
323 **[[https:~~/~~/app.remote.it>>https://app.remote.it]]**
324
325 For detailed examples, please see: **[[OpenWrt How to Connect Guide (remote.it)>>url:https://www.remote.it/getting-started/openwrt]]**
326
327
328 === (% style="color:blue" %)**1.  Click "+" in the APP to add a device**(%%) ===
329
330
331 Then click Add "OpenWrt" and the APP will generate a command to register the device.
332
333 [[image:image-20230320110123-4.png||height="657" width="1191"]]
334
335
336
337 === (% style="color:blue" %)**2.  Copy the register device command**(%%) ===
338
339
340 [[image:image-20230320110309-5.png||height="635" width="1197"]]
341
342
343
344 === (% style="color:blue" %)**3.  Enter the command copied from the previous step on the gateway Linux command line**(%%) ===
345
346
347 (% class="wikigeneratedid" id="H" %)
348 [[image:image-20230320105212-1.png||height="758" width="820"]]
349
350
351
352 === (% style="color:blue" %)**4.  Check whether the device is successfully registered on the Remote.it APP**(%%) ===
353
354
355 [[image:image-20230320112057-6.png||height="603" width="1135"]]
356
357
358 == 3.4  Trouble Shooting ==
359
360
361 === **1. What should users do when gateway Remote.it installation fails** ===
362
363
364 [[image:image-20220907162028-4.png||height="564" width="1148"]]
365
366
367 (% style="color:blue" %)**Step 1:  **(%%)Users can download the archive and upload it to the gateway:** [[attach:backup.tar.gz||target="_blank"]]**
368
369 [[image:image-20220907161050-2.png]]
370
371
372
373 (% style="color:blue" %)**Step 2:  **(%%)Back to the Remote.it screen, and click **"Install"** again.
374
375 [[image:image-20220907161352-3.png]]
376
377
378 (% style="color:blue" %)**Step 3:**(%%) Follow the [[Remoteit user instruction for Dragino Gateway>>https://www.remote.it/getting-started/dragino]] steps to reconfigure
379
380
381 = 4.  RSSH Introduction =
382
383
384 Reverse SSH for remote access is available in the latest Dragino firmware for gateway. For security concern, the RSSH only available base on end user demand.
385
386 (% style="color:red" %)**Important Notice:**
387
388 (% class="box warningmessage" %)
389 (((
390 RSSH access will give full control of your device to remote support. Please remove sensitivity info before perform this
391 This RSSH allow Dragino Support Team to remote access to customer's device. Customer is not able to remote access it via Dragino Server.
392
393 If user want to access himself, he need to set up the RSSH server himself.
394 )))
395
396
397 **Below gateway support reverse SSH access:**
398
399 * Firmware Version > lgw~-~-build-v5.4.1618196981-20210412-1111 [[Firmware Download>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/]]
400 * LG01N, OLG01N (Note: LG01-P LG01-S doesn't support)
401 * LG02, OLG02
402 * LG308, DLOS8
403 * LPS8
404 * LIG16
405 * MS14 series if installed with the same firmware.
406
407 == 4.1  End User Guide to use SSH access ==
408
409
410 Go to this the Reverse SSH page as below:
411
412 [[image:image-20231107200442-2.png||height="684" width="973"]]
413
414
415 Get the RSSH configure page
416
417 [[image:image-20220531152815-14.png]]
418
419 Connection OK.
420
421 * (% style="color:#037691" %)**ConnectionType**(%%):  Select a type
422 * (% style="color:#037691" %)**Login ID**(%%):  Input the rssh server minimal ssh user
423 * (% style="color:#037691" %)**Host Address**(%%):  Input rssh server public IP address/domain name
424 * (% style="color:#037691" %)**Connect at Startup**(%%) :  Choose to enable connect once the device is powered.
425 * (% style="color:#037691" %)**Network Keys**(%%):  Click the Generate keys to generate the keys and download / mail it to Dragino support so Dragino can prepare the remote access to
426
427 After doing above, please download and mail the public keys to Dragino support and wait for our mail for the valid host port. Input the valid host port got from our support and click connect so we can remote access to your gateway.
428
429
430 == 4.2  Set Up RSSH Server ==
431
432
433 Advance administrator can config a SSH server to provide support their end user themselves., Steps as below
434
435
436
437 === (% style="color:blue" %)**Step 1 :  Download the SSH service code**(%%) ===
438
439
440 **1).**  git clone [[https:~~/~~/github.com/dragino/rssh-server.git>>url:https://github.com/dragino/rssh-server.git]] rssh-server
441
442 [[image:image-20220531150750-5.png]]
443
444
445 **2).**  cd rssh-server; sudo make ~-~--> to Generate the execute file：rssh_serv
446
447 [[image:image-20220531150811-6.png]]
448
449
450 **Debug** :
451
452 (((
453 (% class="box" %)
454 (((
455 if you git fail.  ~-~->  (% style="color:#037691" %)**sudo: git: command not found**(%%).
456 please install git.  ~-~->    (% style="color:#037691" %)**yum install git -y  or  apt-get install git -y**(%%).
457 if you make error 127,it** (% style="color:#037691" %)lack of gcc(%%)**.
458 please install gcc.  ~-~->  (% style="color:#037691" %)**yum install gcc**(%%).
459 )))
460 )))
461
462 [[image:image-20220531151516-7.png]]
463
464
465 (((
466 (% class="box" %)
467 (((
468 if you make a fatal error : sqlite3.h,it (% style="color:#037691" %)**lack of sqlite3**(%%).
469 please insatell sqlite3.
470 )))
471 )))
472
473 [[image:image-20220531151628-8.png]]
474
475
476 (% style="color:blue" %)**How to install Sqlit3:**
477
478 (% class="box infomessage" %)
479 (((
480 **~ Step 1:** Download the SQLit3 installation package
481 sudo wget **[[https:~~/~~/www.sqlite.org/2021/sqlite-autoconf-3350400.tar.gz>>url:https://www.sqlite.org/2021/sqlite-autoconf-3350400.tar.gz]]**
482
483 **Step 2: **tar the SQLit3 installation package
484 sudo tar -zxvf sqlite-autoconf-3350300.tar.gz
485
486 **Step 3:** Generate the makefile
487 cd sqlite-autoconf-3350300/;./configure
488
489 **Step 4:** Compile makefile
490 sudo make
491
492 **Step 5:** Install makefile
493 sudo make install
494
495 **Check:**
496 cd /usr/local/bin;ls -al  ~-~->    Check to see if there is a file for sqlite3
497 cd sqlite-autoconf-3350300/;./sqlite3 test.db        ~-~->    Test whether the sqlite3 was installed successfully
498
499 **debug:**
500 If you get the imformation that is SQLite header and source version mismatch, when you execute./sqlite3 test.db.
501 Please execute the command /sbin/ldconfig.
502 After that execute the command ./sqlite3 test.db again.
503 )))
504
505
506
507 === (% style="color:blue" %)**Step 2 :  Install and run the RSS service**(%%) ===
508
509
510 **1). ** install database for /var/rsshdb.sqlite3 and Server development port for 3721(The default is 3721)
511
512 user must enter the root account and run the following commands
513
514 (% class="box infomessage" %)
515 (((
516 **$ ./create_sqlite3_db.sh
517 $ ./rssh_serv -p  3721 2>&1 &
518 $ ps -ef | grep rssh_serv check 3721 port**
519 )))
520
521 [[image:image-20220531151958-10.png]]
522
523
524 **Debug:**
525
526 {{{ Check /var/rsshdb.sqlite3 --> ls /var/rsshdb.sqlite3
527 Check ls /var/rsshdb.sqlite3 --> sudo chmod 777 rssh_serv
528 }}}
529
530 {{{ if fail to open dpvlry or to bind to it
531 please kill rssh_serv,and run ./rssh_serv -p 3721 2>&1 & again
532 }}}
533
534
535
536 === (% style="color:blue" %)**Step 3 :  Create a minimal SSH user (reverse SSH proxy for the gateway)**(%%) ===
537
538
539 (% class="box infomessage" %)
540 (((
541 **1):**  sudo useradd XXXXX (custom user name)
542 **2):**  sudo passwd xxxxxx
543 **3):**  cp /bin/bash /bin/rbash
544 **4):**  sudo nano /etc/passwd ~-~-> Change /bin/bash to /bin/rbash
545 **5):**  sudo nano /home/xxxxx/.bashrc **empty it,and input export PATH=$HOME/bin**
546 **6):**  sudo nano /home/xxxxx/.bash_profile **empty it,and input export PATH=$HOME/bin**
547 )))
548
549 (% style="color:red" %)**Now user "XXXXX" is the user with limited permissions of the current system**
550
551
552
553 === (% style="color:blue" %)**Step 4 :  Create an authorization key file**(%%) ===
554
555
556 **1):**  sudo mkdir /home/xxxxx/.ssh; sudo touch /home/xxxxx/.ssh/authorizedkey
557
558
559 **Debug:**
560
561 {{{ check: sudo ls /home/xxxxx/.ssh/authorizedkey}}}
562
563
564 == 4.3  How does user get the gateway to connect to a user's private server ==
565
566
567
568 === (% style="color:blue" %)**Step 1 :  Come back the gateway web UI to get the gateway Public key**(%%) ===
569
570
571 **1)**  in the system ~-~-> (% style="color:#037691" %)**Remote Mgmt/span**
572
573 [[image:image-20220531152419-11.png]]
574
575
576
577 === (% style="color:blue" %)**Step 2 :  Authorization server**(%%) ===
578
579
580 Input the Gateway Publickey into user's private server "/home/XXXXX/.ssh/authorized_keys" file.
581
582 [[image:image-20220531152549-12.png]]
583
584
585
586 === (% style="color:blue" %)**Step 3 :  Connect private server**(%%) ===
587
588
589 This is same as connect Dragino Support Server but just change the server address to customize server address.
590
591 [[image:image-20220531152633-13.png]]
592
593
594
595 === (% style="color:blue" %)**Step 4 :  Check Connection**(%%) ===
596
597
598 Rssh Host connection Ok
599
600 [[image:image-20220531152815-14.png]]
601
602
603 User can use common ps | grep ssh to check it in the gateway.
604
605 [[image:image-20220531152840-15.png]]
606
607
608
609 === (% style="color:blue" %)**Step 5 :  Access the gateway from customized server**(%%) ===
610
611
612 Check what gateways link to server.
613
614 (% class="box infomessage" %)
615 (((
616 **$ ./connect-gw.sh -l**
617 )))
618
619 [[image:image-20220531153016-16.png]]
620
621
622
623 Access the gateway
624
625 (% class="box infomessage" %)
626 (((
627 **$ ./connect-gw.sh <GWID>**
628 )))
629
630 [[image:image-20220531153219-17.png]]