MQTT Forward Instruction

* Firmware Version > LG02_LG08-5.3.1580178039 [[Firmware Download>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/]]

16

* LG01N, OLG01N ((% style="color:red" %)**Warning**(%%): LG01-P LG01-S use another instruction: [[MQTT for LG01-P/LG01S>>doc:Through MQTT to upload data.WebHome]])

17

* LG02, OLG02

* LG308, DLOS8

* LPS8

* LIG16

* MS14 series if installed with the same firmware. (in this case, the MQTT forward will work , but no LoRa support)

= 2. Firmware Change Log for MQTT feature =

26

27

(((

28

This instruction is wrote start from LG02_LG08-5.3.1580178039. Below is related change log since this version of firmware.

29

)))

30

31

* LG02_LG08-5.3.1580178039

** Initiate version

= 3. MQTT forward operating principle =

37

38

== 3.1 Network Structure ==

39

40

Below shows the network structure for MQTT forwarding.

41

42

* For Uplink: The sensor sends data to LoRa Gateway via LoRa wireless, The gateway will process these data and forward to remote MQTT Broker via Internet.

43

* For Downlink: The gateway subscribe a topic in the MQTT broker, when there is update on the topic, the gateway will know and broadcast the data to Local LoRa network,

44

45

[[image:image-20220527133547-1.png]]

46

47

General MQTT structure

48

49

50

== 3.2 How sensor data is forwarded ==

51

52

In this MQTT forward feature, the key point is how the gateway process the sensor data.

53

54

55

=== 3.2.1 Upstream ===

56

57

Assume there are two sensor nodes, their ID are Node1 ID: 6734 , Node2 ID: 7456. In the remote MQTT broker there are two topics: Topic1: /channel/765800, Topic2: /channel/367860. We can set up in the gateway to map Node1 to Topic1 and Node2 to Topic2. So when there is a sensor data from Node1, the gateway will forward the data to Topic1, when there is sensor data from Node2, the gateway will forward to Topic2.

58

59

(((

60

The data flow works as below diagram.

61

)))

62

63

[[image:image-20220527134000-2.png]]

(((

Upstream path

)))

(((

Note: The sensor data can base or LoRa or other method, as long as there are data on the file /var/iot/channels. /span>

)))

(((

)))

=== 3.2.2 Downstream ===

78

79

The gateway subscribes to a topic of the remote MQTT broker topic. When there is some one publish a value on this topic. The gateway will get it and broadcast to local LoRa Network.

80

81

(((

82

Below are the data flow for downstream.

83

)))

84

85

[[image:image-20220527134038-3.png]]

Downstream path

== 3.3 Macro Definition ==

91

92

The MQTT publish command use Macro settings to generate flexible upstream payload for MQTT publish.

93

94

(((

95

Currently the (% style="color:#4f81bd" %)**-t (topic)**(%%) and (% style="color:#4f81bd" %)**-m (message)**(%%) support Macros.

)))

=== 3.3.1 -t topic macro ===

101

102

* CHANNEL: Remote Channel ID

103

* CLIENTID: Client ID , Same as -i

104

* WRITE_API: Remote Channel Write API

105

* USERNAME: User ID (-u)

106

* HOSTNAME: Device Hostname

=== 3.3.2 -m message macro ===

111

112

* HOSTNAME: Device Hostname

113

* CHANNEL: Remote Channel ID

114

* DATA: Sensor Data without time stamp and rssi

115

* META: Completely sensor data with time stamp and rssi

116

* JSON: Convert META to json format.

=== 3.3.3 Example for Macro ===

121

122

[[image:image-20220527134251-4.png]]

123

124

MQTT Publish configure

125

126

127

Above screen shots shows below format:

128

129

* -t: CLIENTID/CHANNEL/data

130

* -m: DATA

131

132

When there is a LoRa sensor arrive. it will be store at the /var/iot/channels as below:

133

134

[[image:image-20220527134332-5.png]]

Sensor Data

(((

According to above macro. Gateway will publish (% style="color:#4f81bd" %)**field1=22.0&field2=49.0**(%%) to topic: (% style="color:#4f81bd" %)**dragino-1b7060/78901/data**(%%), where 78901 is the remote channel for this node ID.

)))

== 3.4 Modify the MQTT to support more options ==

145

146

The MQTT Client Utility used in Dragino is **mosquitto_pub** and **mosquitto_sub**. User can add more options to the mqtt commands. User can check the valid options by command mosquitto_pub ~-~-help. as below:

(% class="box" %)

(((

root@dragino-1ec39c:~~# mosquitto_pub ~-~-help

151

mosquitto_pub is a simple mqtt client that will publish a message on a single topic and exit.

152

mosquitto_pub version 1.6.4 running on libmosquitto 1.6.4.

153

\\Usage: mosquitto_pub {[-h host] [-p port] [-u username] [-P password] -t topic | -L URL}

154

{-f file | -l | -n | -m message}

155

[-c] [-k keepalive] [-q qos] [-r] [~-~-repeat N] [~-~-repeat-delay time]

156

[-A bind_address]

157

[-i id] [-I id_prefix]

158

[-d] [~-~-quiet]

159

[-M max_inflight]

160

[-u username [-P password]]

161

[~-~-will-topic [~-~-will-payload payload] [~-~-will-qos qos] [~-~-will-retain]]

162

[{~-~-cafile file | ~-~-capath dir} [~-~-cert file] [~-~-key file]

163

[~-~-ciphers ciphers] [~-~-insecure]

164

[~-~-tls-alpn protocol]

165

[~-~-tls-engine engine] [~-~-keyform keyform] [~-~-tls-engine-kpass-sha1]]

166

[~-~-psk hex-key ~-~-psk-identity identity [~-~-ciphers ciphers]]

167

[~-~-proxy socks-url]

168

[~-~-property command identifier value]

169

[-D command identifier value]

170

mosquitto_pub ~-~-help

171

\\-A : bind the outgoing socket to this host/ip address. Use to control which interface

172

the client communicates over.

173

-d : enable debug messages.

174

-D : Define MQTT v5 properties. See the documentation for more details.

175

-f : send the contents of a file as the message.

176

-h : mqtt host to connect to. Defaults to localhost.

177

-i : id to use for this client. Defaults to mosquitto_pub_ appended with the process id.

178

-I : define the client id as id_prefix appended with the process id. Useful for when the

179

broker is using the clientid_prefixes option.

180

-k : keep alive in seconds for this client. Defaults to 60.

181

-L : specify user, password, hostname, port and topic as a URL in the form:

182

mqtt(s):~/~/[username[:password]@]host[:port]/topic

183

-l : read messages from stdin, sending a separate message for each line.

184

-m : message payload to send.

185

-M : the maximum inflight messages for QoS 1/2..

186

-n : send a null (zero length) message.

187

-p : network port to connect to. Defaults to 1883 for plain MQTT and 8883 for MQTT over TLS.

188

-P : provide a password

189

-q : quality of service level to use for all messages. Defaults to 0.

190

-r : message should be retained.

191

-s : read message from stdin, sending the entire input as a message.

192

-t : mqtt topic to publish to.

193

-u : provide a username

194

-V : specify the version of the MQTT protocol to use when connecting.

195

Can be mqttv5, mqttv311 or mqttv31. Defaults to mqttv311.

196

~-~-help : display this message.

197

~-~-repeat : if publish mode is -f, -m, or -s, then repeat the publish N times.

198

~-~-repeat-delay : if using ~-~-repeat, wait time seconds between publishes. Defaults to 0.

199

~-~-quiet : (% style="color:red" %)don't print error messages.

200

~-~-will-payload : payload for the client Will, which is sent by the broker in case of

201

unexpected disconnection. If not given and will-topic is set, a zero

202

length message will be sent.

203

~-~-will-qos : QoS level for the client Will.

204

~-~-will-retain : if given, make the client Will retained.

205

~-~-will-topic : the topic on which to publish the client Will.

206

~-~-cafile : path to a file containing trusted CA certificates to enable encrypted

207

communication.

208

~-~-capath : path to a directory containing trusted CA certificates to enable encrypted

209

communication.

210

~-~-cert : client certificate for authentication, if required by server.

211

~-~-key : client private key for authentication, if required by server.

212

~-~-keyform : keyfile type, can be either "pem" or "engine".

213

~-~-ciphers : openssl compatible list of TLS ciphers to support.

214

~-~-tls-version : TLS protocol version, can be one of tlsv1.3 tlsv1.2 or tlsv1.1.

215

Defaults to tlsv1.2 if available.

216

~-~-insecure : do not check that the server certificate hostname matches the remote

217

hostname. Using this option means that you cannot be sure that the

218

remote host is the server you wish to connect to and so is insecure.

219

Do not use this option in a production environment.

220

~-~-tls-engine : If set, enables the use of a TLS engine device.

221

~-~-tls-engine-kpass-sha1 : SHA1 of the key password to be used with the selected SSL engine.

222

~-~-psk : pre-shared-key in hexadecimal (no leading 0x) to enable TLS-PSK mode.

223

~-~-psk-identity : client identity string for TLS-PSK mode.

224

~-~-proxy : SOCKS5 proxy URL of the form:

225

socks5h:~/~/[username[:password]@]hostname[:port]

226

Only "none" and "username" authentication is supported.

227

\\See https:~/~/mosquitto.org/ for more information.

)))

(((

and modify the /usr/bin/mqtt_process.sh script, the location to change the command option is below lines:

)))

(% class="box" %)

(((

//# Call MQTT Publish command

238

\\# 1. Case with User, Password and Client ID present (e.g. Azure)

239

if [ ! -z "$pass" ] && [ ! -z "$user" ] && [ ! -z "$clientID" ]; then

240

case="1"

241

mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic -u $user -P "$pass" $C $cafile $PUB_FLAG "$mqtt_data"

242

\\# 2. Case with Certificate, Key and ClientID present (e.g. AWS)

243

elif [ ! -z "$certfile" ] && [ ! -z "$key" ] && [ ! -z "$clientID" ]; then

244

case="2"

245

mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic ~-~-cert $cert ~-~-key $key $C $cafile $PUB_FLAG "$mqtt_data"

246

\\# 3. Case with no User, Certificate or ClientID present

247

elif [ -z "$user" ] && [ -z "$certfile" ] && [ -z "$clientID" ]; then

248

case="3"

249

mosquitto_pub $D -h $server -p $port -q $pub_qos -t $pub_topic $PUB_FLAG "$mqtt_data"

250

\\# 4. Case with no User, Certificate, but with ClientID present

251

elif [ -z "$user" ] && [ -z "$certfile" ] && [ ! -z "$clientID" ]; then

252

case="4"

253

mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic $PUB_FLAG "$mqtt_data"

254

\\# 5. Case with User and ClientID present, but no Password and no Certificate present

255

elif [ -z "$pass" ] && [ -z "$certfile" ] && [ ! -z "$user" ] && [ ! -z "$clientID" ]; then

256

case="5"

257

mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic -u $user $PUB_FLAG "$mqtt_data"

258

\\# 6. Case with User and Password present, but no ClientID and no Certificate present

259

elif [ ! -z "$user" ] && [ ! -z "$pass" ] && [ -z "$clientID" ] && [ -z "$certfile" ]; then

260

case="6"

261

mosquitto_pub $D -h $server -p $port -q $pub_qos -t $pub_topic -u $user -P "$pass" $PUB_FLAG "$mqtt_data"

262

\\# 0. Else - invalid parameters, just log

263

else

264

case="(% style="color:red" %)Invalid parameters" (%%)

265

logger (% style="color:red" %)"[IoT.MQTT]:Invalid Parameters - mosquitto_pub not called."(%%)

fi//

)))

= 4. Example to communicate to a simple MQTT server =

== 4.1 Overview ==

This section is an example to show how to set up LG01-N to communicate with a MQTT server. The MQTT server is a simple utility set up in a local PC. Note: User can set up same server via [[this instruction>>url:http://www.steves-internet-guide.com/install-mosquitto-broker/]].

275

276

277

== 4.2 Simulate via MQTT.fx utility ==

278

279

The [[MQTT.fx>>url:http://mqttfx.jensd.de/index.php/download]] is a MQTT client tool. We can use this to simulate a MQTT connection to our MQTT broker first to make sure the MQTT broker works. This will also help us understand how it works.

280

281

(((

282

In this test, the MQTT broker and MQTT.fx are installed in the same PC, so the MQTT server address in MQTT.fx should be localhost. Below shows how to connect to the server.

283

)))

284

285

[[image:image-20220527134929-6.png]]

286

287

Connect to MQTT Broker

288

289

290

After connected, use publish to public some thing to MQTT server. This to simulate upsteam

291

292

[[image:image-20220527135037-7.png]]

293

294

Upstream: Publish message to MQTT Broker

295

296

297

To simulate a downstream, use MQTT.fx to subscribe a topic, and publish something to this topic. as Below:

298

299

[[image:image-20220527135215-8.png]]

300

301

Downstream: Subscribe a topic to get downstream

302

303

304

== 4.3 Simulate via Dragino Command Line ==

305

306

For first try of MQTT connection, simulate via command line is recommend, there are many servers / connection type for MQTT. They are using different connection parameters. Simulating the connection via command line will help us rapidly connect to server and debug.

307

308

In the Dragino Gateway, we use [[mosquitto client>>url:https://mosquitto.org/]] for MQTT connection.

309

310

311

(% style="color:#4f81bd" %)**For Upstream**

312

313

command is [[mosquitto_pub>>url:https://mosquitto.org/man/mosquitto_pub-1.html]]

314

315

Example: mosquitto_pub -h 192.168.199.148 -p 1883 -t /channel/6543 -m temp=36

316

317

Note: 192.168.199.148 is MQTT broker address, the gateway and the MQTT broker PC are in the same network.

318

319

[[image:image-20220527135310-9.png]]

mosquitto_pub

(% style="color:#4f81bd" %)**For Downstream**

325

326

Use [[mosquitto_sub>>url:https://mosquitto.org/man/mosquitto_sub-1.html]] to subscribe the change on the topic.

327

328

[[image:image-20220527135440-10.png]]

mosquitto_sub

== 4.4 Configure Dragino UI for MQTT connection ==

334

335

This chapter are step by step to show to configure the Dragino Menu for MQTT auto connection.

336

337

(((

338

Go to (% style="color:#4f81bd" %)**Dragino Menu ~-~-> MQTT Client**

339

)))

340

341

[[image:https://wiki.dragino.com/images/thumb/b/bc/MQTT_Command_8.png/600px-MQTT_Command_8.png||height="249" width="600"]]

342

343

go to mqtt configure menu

(((

Select (% style="color:#4f81bd" %)**Forward to MQTT server**. (% style="color:red" %)**Notice**(%%): This option is removed from the latest firmware, in the latest firmware, if user submit "SAVE & APPLY" in MQTT page, the gateway will use MQTT service.

348

)))

349

350

[[image:image-20220527135742-11.png]]

forward to MQTT

=== 4.4.1 Configure the MQTT Client for Upstream ===

356

357

Below screenshot is same as the publish command:

(% class="box" %)

(((

mosquitto_pub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t CLIENTID/CHANNEL/data -m DATA

362

~/~/where the CLIENTID, CHANNEL & DATA are macro. represent for

363

~/~/CLIENTID: dragino-1b7060

364

~/~/CHANNEL: Remote ID in Channel settings; here is 78901 or 567456

365

~/~/DATA: The data stores in /var/iot/channels/

366

)))

367

368

[[image:image-20220527135828-12.png]]

369

370

MQTT Publish configure

371

372

373

[[image:image-20220527135929-13.png]]

374

375

MQTT Channel settings

(((

For example, if we put a data(temp=46) on the file /var/iot/channels/4567, because 4567 match the remote channel 78901. the gateway will run this command:

)))

(% class="box" %)

(((

mosquitto_pub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t dragino-1b7060/78901/data -m temp=46

)))

(((

to MQTT broker.

)))

(((

Below is a simulation to put this data to active the MQTT publish.

394

)))

395

396

[[image:image-20220527140023-14.png]]

MQTT Publish

=== 4.4.2 Configure the MQTT Client for Downstream ===

402

403

Below screen shot equal to this subscribe command:

(% class="box" %)

(((

mosquitto_sub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t command.

408

)))

409

410

[[image:image-20220527140100-15.png]]

MQTT Subscribe

(((

When MQTT broker receive a update on this topic, the gateway will get the update and use LoRa radio to broadcast this message. The LoRa parameters used for update is:

417

)))

418

419

[[image:image-20220527140148-16.png]]

420

421

LoRa Broadcast parameters.

422

423

424

And below is the subscribe simulation:

425

426

[[image:image-20220527140238-17.png]]

427

428

downstream simulation

429

430

431

== 4.5 Add LoRa support to communicate with remote sensor ==

432

433

In above section, we have configured the UI to support MQTT upstream and downstream. We can simulate via Linux command. In this section, we will guide how to communicate with remote LoRa End Node for upstream and downstream.

434

435

436

=== 4.5.1 Use LoRa Raw protocol for communication ~-~- For LG01/LG02 ===

437

438

(((

439

We can use [[LoRa Shield>>url:http://www.dragino.com/products/lora/item/102-lora-shield.html]] to send LoRa Raw data to Gateway and receive data from gateway.

)))

(((

The example Sketch for LoRa Shield +Arduino is here: [[LoRa_Shield_Sketch_For_MQTT>>url:http://www.dragino.com/downloads/index.php?dir=LoraShield/]]

)))

(((

And this link is the required library: [[arduino-LoRa-master>>url:http://www.dragino.com/downloads/index.php?dir=LoraShield/]]. Unzip this library and put in Arduino library location.

)))

(((

What does the Arduino Sketch do? The Arduino Sketch will:

452

)))

453

454

* Upstream: Keep sending a LoRa Message every minutes with this payload : <4567>tem=xx&hum=yy (Where xx and yy are temperature and humidity value generated randomly).

455

* Downstream: Listening broadcast message from gateway, and print it in console.

456

* The LoRa parameter settings in Arduino should match the LoRa settings in gateway, as below:

457

458

[[image:image-20220527140354-18.png]]

459

460

LoRa Parameter should match

Below is the test result after the Arduino Sketch is running.

465

466

[[image:image-20220527140459-19.png]]

Upstream Data Flow

[[image:image-20220527140542-20.png]]

Downstream Data Flow

=== 4.5.2 Use LoRaWAN Protocol for communication ~-~- For LG308/LPS8/DLOS8 ===

478

479

(((

480

Since firmware (% style="color:#4f81bd" %)**LG02_LG08~-~-build-v5.3.1585192026-20200326-1109,**(%%) Dragino LoRaWAN gateways support the communication to LoRaWAN (% style="color:#4f81bd" %)**ABP end node**(%%) locally without the need of LoRaWAN server. This feature allow us to integrate MQTT in the gateway to support LoRaWAN to MQTT forwarding or visa verse.

)))

(((

When use test this feature, please use the version higher then : (% style="color:#4f81bd" %)**LG02_LG08~-~-build-v5.4.1593400722-20200629-1120**(%%), in this version, the upload format is changed and readable, which is easier for integration.

485

(% style="color:#4f81bd" %)**Video Instruction**(%%): (% style="color:blue" %)[[https:~~/~~/youtu.be/qJTY441-t90>>url:https://youtu.be/qJTY441-t90]]

)))

(((

(% style="color:#4f81bd" %)**Step 1**(%%): Refer [[Communicate with ABP End Node>>Communicate with ABP End Node without LoRaWAN Network Server --- LG308]] to know how to set up LG308 to work with LoRaWAN End node.

)))

(((

(% style="color:#4f81bd" %)**Step 2**(%%): Make sure your Radio settings match the End Node settings.

494

)))

495

496

[[image:image-20220527141235-21.png]]

497

498

Use Same Frequency Band as End Node

(((

(((

(% style="color:#4f81bd" %)**Step 3**(%%): Set up publish format and MQTT channel. The LG308 will store the Data from End node in (% style="color:#4f81bd" %)**HEX format**(%%) in the file. And we need to config the format to (% style="color:#4f81bd" %)**META**

)))

)))

[[image:image-20220527141450-22.png]]

508

509

Publish mush use META as data format for LG308

510

511

512

(% style="color:#4f81bd" %)**Step 4**(%%): Map the Device Address to Remote ID in MQTT server.

513

514

[[image:image-20220527141727-23.png]]

515

516

Map Dev Addr to remote ID

517

518

519

(% style="color:#4f81bd" %)**Step 5: Upstream**(%%): Save the change, we can see the log info via "sytem log", End Node and MQTT Server

520

521

[[image:image-20220527141843-24.png]]

Upstream Process

[[image:image-20220527141933-25.png]]

Choose ASCII Format

[[image:image-20220527142028-26.png]]

LHT65 Decoder

(% style="color:#4f81bd" %)**Step 6: Set up subscribe**(%%)**:** Subscribe a topci for downstream.

538

539

[[image:image-20220527142115-27.png]]

Subscribe to a topic

(% style="color:#4f81bd" %)**Step 7: Downstream**(%%): Save the change, we can see the log info via "sytem log", End Node and MQTT Server.

545

546

[[image:image-20220527142239-28.png]]

Downstream Flow

(% style="color:red" %)**Notice: The text use for Downstream must meet the requirement from [[LG308 Downstream Payload>>Communicate with ABP End Node without LoRaWAN Network Server --- LG308||anchor="H2.2Downstream"]]**

= 5. How to Debug =

User can login the gateway's console and run (% style="color:#4f81bd" %)**logread -f**(%%). It will shows the output when there is packet arrive.User can see if it is correct.

556

557

558

= 6. How to ask for Support =

559

560

If a user still not have trouble making it works. please send a mail to support@dragino.com with the below info:

561

562

* Detail of your LoRaWAN end node.

563

* Gateway Model and firmware version