Changes for page MQTT Forward Instruction
Last modified by Kilight Cao on 2024/08/31 16:26
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -19,7 +19,6 @@ 19 19 * LIG16 20 20 * MS14 series if installed with the same firmware. (in this case, the MQTT forward will work , but no LoRa support) 21 21 22 - 23 23 = 2. Firmware Change Log for MQTT feature = 24 24 25 25 ((( ... ... @@ -29,7 +29,6 @@ 29 29 * LG02_LG08-5.3.1580178039 30 30 ** Initiate version 31 31 32 - 33 33 = 3. MQTT forward operating principle = 34 34 35 35 == 3.1 Network Structure == ... ... @@ -139,8 +139,7 @@ 139 139 root@dragino-1ec39c:~~# mosquitto_pub ~-~-help 140 140 mosquitto_pub is a simple mqtt client that will publish a message on a single topic and exit. 141 141 mosquitto_pub version 1.6.4 running on libmosquitto 1.6.4. 142 - 143 -Usage: mosquitto_pub {[-h host] [-p port] [-u username] [-P password] -t topic | -L URL} 140 +\\Usage: mosquitto_pub {[-h host] [-p port] [-u username] [-P password] -t topic | -L URL} 144 144 {-f file | -l | -n | -m message} 145 145 [-c] [-k keepalive] [-q qos] [-r] [~-~-repeat N] [~-~-repeat-delay time] 146 146 [-A bind_address] ... ... @@ -158,8 +158,7 @@ 158 158 [~-~-property command identifier value] 159 159 [-D command identifier value] 160 160 mosquitto_pub ~-~-help 161 - 162 --A : bind the outgoing socket to this host/ip address. Use to control which interface 158 +\\-A : bind the outgoing socket to this host/ip address. Use to control which interface 163 163 the client communicates over. 164 164 -d : enable debug messages. 165 165 -D : Define MQTT v5 properties. See the documentation for more details. ... ... @@ -215,8 +215,7 @@ 215 215 ~-~-proxy : SOCKS5 proxy URL of the form: 216 216 socks5h:~/~/[username[:password]@]hostname[:port] 217 217 Only "none" and "username" authentication is supported. 218 - 219 -See https:~/~/mosquitto.org/ for more information. 214 +\\See https:~/~/mosquitto.org/ for more information. 220 220 ))) 221 221 222 222 ... ... @@ -227,38 +227,31 @@ 227 227 (% class="box" %) 228 228 ((( 229 229 # Call MQTT Publish command 230 - 231 -# 1. Case with User, Password and Client ID present (e.g. Azure) 225 +\\# 1. Case with User, Password and Client ID present (e.g. Azure) 232 232 if [ ! -z "$pass" ] && [ ! -z "$user" ] && [ ! -z "$clientID" ]; then 233 233 case="1" 234 234 mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic -u $user -P "$pass" $C $cafile $PUB_FLAG "$mqtt_data" 235 - 236 -# 2. Case with Certificate, Key and ClientID present (e.g. AWS) 229 +\\# 2. Case with Certificate, Key and ClientID present (e.g. AWS) 237 237 elif [ ! -z "$certfile" ] && [ ! -z "$key" ] && [ ! -z "$clientID" ]; then 238 238 case="2" 239 239 mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic ~-~-cert $cert ~-~-key $key $C $cafile $PUB_FLAG "$mqtt_data" 240 - 241 -# 3. Case with no User, Certificate or ClientID present 233 +\\# 3. Case with no User, Certificate or ClientID present 242 242 elif [ -z "$user" ] && [ -z "$certfile" ] && [ -z "$clientID" ]; then 243 243 case="3" 244 244 mosquitto_pub $D -h $server -p $port -q $pub_qos -t $pub_topic $PUB_FLAG "$mqtt_data" 245 - 246 -# 4. Case with no User, Certificate, but with ClientID present 237 +\\# 4. Case with no User, Certificate, but with ClientID present 247 247 elif [ -z "$user" ] && [ -z "$certfile" ] && [ ! -z "$clientID" ]; then 248 248 case="4" 249 249 mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic $PUB_FLAG "$mqtt_data" 250 - 251 -# 5. Case with User and ClientID present, but no Password and no Certificate present 241 +\\# 5. Case with User and ClientID present, but no Password and no Certificate present 252 252 elif [ -z "$pass" ] && [ -z "$certfile" ] && [ ! -z "$user" ] && [ ! -z "$clientID" ]; then 253 253 case="5" 254 254 mosquitto_pub $D -h $server -p $port -q $pub_qos -i $clientID -t $pub_topic -u $user $PUB_FLAG "$mqtt_data" 255 - 256 -# 6. Case with User and Password present, but no ClientID and no Certificate present 245 +\\# 6. Case with User and Password present, but no ClientID and no Certificate present 257 257 elif [ ! -z "$user" ] && [ ! -z "$pass" ] && [ -z "$clientID" ] && [ -z "$certfile" ]; then 258 258 case="6" 259 259 mosquitto_pub $D -h $server -p $port -q $pub_qos -t $pub_topic -u $user -P "$pass" $PUB_FLAG "$mqtt_data" 260 - 261 -# 0. Else - invalid parameters, just log 249 +\\# 0. Else - invalid parameters, just log 262 262 else 263 263 case="Invalid parameters" 264 264 logger "[IoT.MQTT]:Invalid Parameters - mosquitto_pub not called." ... ... @@ -317,7 +317,7 @@ 317 317 mosquitto_pub 318 318 319 319 320 -For Downstream 308 +(% class="mark" %)**For Downstream** 321 321 322 322 Use [[mosquitto_sub>>url:https://mosquitto.org/man/mosquitto_sub-1.html]] to subscribe the change on the topic. 323 323 ... ... @@ -330,13 +330,17 @@ 330 330 331 331 This chapter are step by step to show to configure the Dragino Menu for MQTT auto connection. 332 332 333 -Go to Dragino Menu ~-~-> MQTT Client 321 +((( 322 +Go to (% class="mark" %)**Dragino Menu ~-~-> MQTT Client** 323 +))) 334 334 335 335 [[image:https://wiki.dragino.com/images/thumb/b/bc/MQTT_Command_8.png/600px-MQTT_Command_8.png||height="249" width="600"]] 336 336 337 337 go to mqtt configure menu 338 338 339 -Select Forward to MQTT server. Notice: This option is removed from the latest firmware, in the latest firmware, if user submit "SAVE & APPLY" in MQTT page, the gateway will use MQTT service. 329 +((( 330 +Select **Forward to MQTT server**. (% class="mark" %)**Notice**(%%): This option is removed from the latest firmware, in the latest firmware, if user submit "SAVE & APPLY" in MQTT page, the gateway will use MQTT service. 331 +))) 340 340 341 341 [[image:https://wiki.dragino.com/images/thumb/1/14/MQTT_Commands_8.png/600px-MQTT_Commands_8.png||height="240" width="600"]] 342 342 ... ... @@ -347,30 +347,41 @@ 347 347 348 348 Below screenshot is same as the publish command: 349 349 350 -{{{mosquitto_pub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t CLIENTID/CHANNEL/data -m DATA 351 -//where the CLIENTID, CHANNEL & DATA are macro. represent for 352 -//CLIENTID: dragino-1b7060 353 -//CHANNEL: Remote ID in Channel settings; here is 78901 or 567456 354 -//DATA: The data stores in /var/iot/channels/ 355 -}}} 342 +(% class="box" %) 343 +((( 344 +mosquitto_pub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t CLIENTID/CHANNEL/data -m DATA 345 +~/~/where the CLIENTID, CHANNEL & DATA are macro. represent for 346 +~/~/CLIENTID: dragino-1b7060 347 +~/~/CHANNEL: Remote ID in Channel settings; here is 78901 or 567456 348 +~/~/DATA: The data stores in /var/iot/channels/ 349 +))) 356 356 357 357 [[image:https://wiki.dragino.com/images/thumb/c/c7/MQTT_Command_9.png/600px-MQTT_Command_9.png||height="385" width="600"]] 358 358 359 359 MQTT Publish configure 360 360 355 + 361 361 [[image:https://wiki.dragino.com/images/thumb/b/b7/MQTT_Command_10.png/600px-MQTT_Command_10.png||height="544" width="600"]] 362 362 363 363 MQTT Channel settings 364 364 360 +((( 365 365 For example, if we put a data(temp=46) on the file /var/iot/channels/4567, because 4567 match the remote channel 78901. the gateway will run this command: 362 +))) 366 366 367 -{{{mosquitto_pub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t dragino-1b7060/78901/data -m temp=46 368 -}}} 364 +(% class="box" %) 365 +((( 366 +mosquitto_pub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t dragino-1b7060/78901/data -m temp=46 367 +))) 369 369 369 +((( 370 370 to MQTT broker. 371 +))) 371 371 372 372 374 +((( 373 373 Below is a simulation to put this data to active the MQTT publish. 376 +))) 374 374 375 375 [[image:https://wiki.dragino.com/images/thumb/3/30/MQTT_Command_11.png/600px-MQTT_Command_11.png||height="308" width="600"]] 376 376 ... ... @@ -381,8 +381,10 @@ 381 381 382 382 Below screen shot equal to this subscribe command: 383 383 384 -{{{ mosquitto_sub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t command. 385 -}}} 387 +(% class="box" %) 388 +((( 389 +mosquitto_sub -h 192.168.199.148 -p 1883 -i dragino-1b7060 -t command. 390 +))) 386 386 387 387 [[image:https://wiki.dragino.com/images/3/36/MQTT_Command_12.png||height="173" width="579"]] 388 388 ... ... @@ -389,7 +389,9 @@ 389 389 MQTT Subscribe 390 390 391 391 397 +((( 392 392 When MQTT broker receive a update on this topic, the gateway will get the update and use LoRa radio to broadcast this message. The LoRa parameters used for update is: 399 +))) 393 393 394 394 [[image:https://wiki.dragino.com/images/thumb/b/b8/MQTT_Command_13.png/600px-MQTT_Command_13.png||height="300" width="600"]] 395 395 ... ... @@ -409,13 +409,21 @@ 409 409 410 410 === 4.5.1 Use LoRa Raw protocol for communication ~-~- For LG01/LG02 === 411 411 419 +((( 412 412 We can use [[LoRa Shield>>url:http://www.dragino.com/products/lora/item/102-lora-shield.html]] to send LoRa Raw data to Gateway and receive data from gateway. 421 +))) 413 413 423 +((( 414 414 The example Sketch for LoRa Shield +Arduino is here: [[LoRa_Shield_Sketch_For_MQTT>>url:http://www.dragino.com/downloads/index.php?dir=LoraShield/]] 425 +))) 415 415 427 +((( 416 416 And this link is the required library: [[arduino-LoRa-master>>url:http://www.dragino.com/downloads/index.php?dir=LoraShield/]]. Unzip this library and put in Arduino library location. 429 +))) 417 417 431 +((( 418 418 What does the Arduino Sketch do? The Arduino Sketch will: 433 +))) 419 419 420 420 * Upstream: Keep sending a LoRa Message every minutes with this payload : <4567>tem=xx&hum=yy (Where xx and yy are temperature and humidity value generated randomly). 421 421 * Downstream: Listening broadcast message from gateway, and print it in console. ... ... @@ -439,25 +439,31 @@ 439 439 440 440 === 4.5.2 Use LoRaWAN Protocol for communication ~-~- For LG308/LPS8/DLOS8 === 441 441 442 -Since firmware LG02_LG08~-~-build-v5.3.1585192026-20200326-1109, Dragino LoRaWAN gateways support the communication to LoRaWAN ABP end node locally without the need of LoRaWAN server. This feature allow us to integrate MQTT in the gateway to support LoRaWAN to MQTT forwarding or visa verse. 457 +((( 458 +Since firmware (% class="mark" %)**LG02_LG08~-~-build-v5.3.1585192026-20200326-1109,**(%%) Dragino LoRaWAN gateways support the communication to LoRaWAN (% class="mark" %)**ABP end node**(%%) locally without the need of LoRaWAN server. This feature allow us to integrate MQTT in the gateway to support LoRaWAN to MQTT forwarding or visa verse. 459 +))) 443 443 444 -When use test this feature, please use the version higher then : LG02_LG08~-~-build-v5.4.1593400722-20200629-1120, in this version, the upload format is changed and readable, which is easier for integration. 461 +((( 462 +When use test this feature, please use the version higher then : (% class="mark" %)**LG02_LG08~-~-build-v5.4.1593400722-20200629-1120**(%%), in this version, the upload format is changed and readable, which is easier for integration. 463 +(% class="mark" %)**Video Instruction**(%%):[[https:~~/~~/youtu.be/qJTY441-t90>>url:https://youtu.be/qJTY441-t90]] 464 +))) 445 445 466 +((( 467 +**Step 1**: Refer [[Communicate with ABP End Node>>url:https://wiki.dragino.com/index.php/Communication_with_ABP_End_Node]] to know how to set up LG308 to work with LoRaWAN End node. 468 +))) 446 446 470 +((( 471 +**Step 2**: Make sure your Radio settings match the End Node settings. 472 +))) 447 447 448 -Video Instruction:[[https:~~/~~/youtu.be/qJTY441-t90>>url:https://youtu.be/qJTY441-t90]] 449 - 450 - 451 -Step 1: Refer [[Communicate with ABP End Node>>url:https://wiki.dragino.com/index.php/Communication_with_ABP_End_Node]] to know how to set up LG308 to work with LoRaWAN End node. 452 - 453 -Step 2: Make sure your Radio settings match the End Node settings. 454 - 455 455 [[image:https://wiki.dragino.com/images/thumb/f/f7/LG308_MQTT_5.png/600px-LG308_MQTT_5.png||height="387" width="600"]] 456 456 457 457 Use Same Frequency Band as End Node 458 458 459 459 460 -Step 3: Set up publish format and MQTT channel. The LG308 will store the Data from End node in HEX format in the file. And we need to config the format to META 479 +((( 480 +**Step 3**: Set up publish format and MQTT channel. The LG308 will store the Data from End node in HEX format in the file. And we need to config the format to META 481 +))) 461 461 462 462 [[image:https://wiki.dragino.com/images/thumb/8/8d/LG308_MQTT_3.png/600px-LG308_MQTT_3.png||height="385" width="600"]] 463 463 ... ... @@ -514,7 +514,6 @@ 514 514 )))|=(% style="width: 242px;" %)((( 515 515 [[image:https://wiki.dragino.com/images/thumb/3/3b/Lewei50.png/200px-Lewei50.png||alt="Lewei50.png" height="65" width="223"]] 516 516 517 -(% class="wikigeneratedid" %) 518 518 == == 519 519 520 520 == [[乐联网平台>>url:https://www.lewei50.com/]] ==