Wiki source code of Lorawan-server by Petr Gotthard

Version 36.1 by Kilight Cao on 2022/06/01 18:54

version	line-number	content
1.4	1	~ Contents:
	2
	3	{{toc/}}
	4
26.2	5
	6
	7
	8
1.2	9	= 1. Introduction =
1.1	10
1.2	11	This is an Open Source LoRaWAN server from [[https:~~/~~/github.com/gotthardp/lorawan-server>>url:https://github.com/gotthardp/lorawan-server]].
1.1	12
	13
11.1	14	= 2. Support Devices =
1.1	15
11.1	16	All current LoRaWAN gateway can support the connection to this LoRaWAN server. Some gateway models have this lorawan server built-in by default. They are:
	17
	18	* HP0A
	19	* HP0C
	20	* LPS8v2
	21
	22	If for some reason, if the above model doesn't have this lorawan server in it. Users can install them manually.
	23
15.4	24
11.1	25	== 2.1 Install lorawan server in Armbian System: ==
	26
	27	=== Check if you have the Armbian system. ===
	28
18.1	29	Run command:
20.1	30
18.1	31	(% class="box infomessage" %)
	32	(((
	33	uname -a
	34	cat /etc/debian_version
	35	)))
11.1	36
18.1	37	[[image:image-20220526172628-2.png]]
11.1	38
	39	=== Install lorawan server ===
	40
20.1	41	Run command:
11.1	42
20.1	43	(% class="box infomessage" %)
	44	(((
21.1	45	wget https://github.com/gotthardp/lorawan-server/releases/download/v0.6.7/lorawan-server_0.6.7_all.deb
20.1	46	dpkg -i lorawan-server_0.6.7_all.deb
	47	)))
	48
23.1	49	[[image:image-20220527085338-1.png\|\|height="271" width="1145"]]
20.1	50
23.1	51	At this point, lorawan-server is installed
20.1	52
26.2	53
26.3	54	== 2.2 How do start lorawan server ==
23.1	55
24.1	56	=== Setting the automatic startup and start/stop lorawan-server via systemctl ===
23.1	57
21.1	58	If users want the server to start automatically after system reboot, run the command:
	59
	60	(% class="box infomessage" %)
	61	(((
	62	systemctl enable lorawan-server
	63	)))
	64
24.1	65	start/stop lorawan-server via systemctl:
21.1	66
	67	(% class="box infomessage" %)
	68	(((
23.1	69	systemctl start lorawan-server
21.1	70	systemctl stop lorawan-server
	71	)))
	72
23.1	73	[[image:image-20220527091541-2.png\|\|height="81" width="896"]]
21.1	74
23.1	75	By default, the server listens on HTTP port 8080 and expects "admin" as both username and password. Users can access it via a web browser by entering the URL, where is the IP or the hostname of your server. [[http:~~/~~/ip_address:8080>>http://ip_address:8080]]
	76
11.1	77
25.1	78	= 3. Configure Gateway =
11.1	79
25.1	80	== 3.1 Register Gateway ==
24.1	81
33.1	82	[[image:image-20220531144134-1.png\|\|height="623" width="965"]]
1.1	83
	84
33.1	85	Back to the page of Semtech UDP check the secondary server settings and click the button of Save&Apply
1.1	86
	87
15.2	88
33.1	89	[[image:image-20220531144640-2.png]]
15.2	90
	91
33.1	92	If the user completes the above steps, you can check your gateway status on the built-in Lorawan server.
11.1	93
	94
33.1	95	[[image:image-20220531144914-3.png\|\|height="657" width="964"]]
	96
	97
	98	[[image:image-20220531144957-4.png\|\|height="425" width="970"]]
	99
25.1	100	= 4. Configure Sensors =
33.1	101
	102	== Step 1. Add the Networks ==
	103
	104	The following are examples of adding EU frequency nodes
	105
	106	(% class="box" %)
	107	(((
	108	1.Input the NetID* ~-~-> Random 6 digits
	109
	110	2.Choose the Region* ~-~-> EU 863-870MHz
	111
34.1	112	3.Input the RX1/RX2 Delay ~-~-> RX1 Delay(s) is generally 5s and RX2 Delay(s) is generally 6s
33.1	113	)))
	114
34.1	115	[[image:image-20220531151807-5.png\|\|height="538" width="1248"]]
	116
	117

Wiki source code of Lorawan-server by Petr Gotthard

Applications

Navigation