How to set the transmit time interval -- LoRaWAN End node
Last modified by Bei Jinggeng on 2022/11/10 14:31
Table of Contents:
1. Introduction
This chapter describes how to set Transmit Time Interval.
2. Downlink Payload
TDC can be controlled by Downlink Payload.
For example: AT+TDC=0x258=600s ; Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type code is 01.
Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s
Example Downlink payload setting in TTN:
3. Downlink Method
See use note for different serves Servers Note(IoT LoRaWAN Server)