Version 86.1 by David Huang on 2023/08/09 17:05
Show last authors
1 (% class="wikigeneratedid" id="HTableofContents:" %)
2 **Table of Contents:**
3
4 {{toc/}}
5
6
7 = 1. The use of this guideline =
8
9
10 This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
11
12
13 = 2. Attach Network =
14
15
16 To attache NB-IoT sensors to NB-IoT Network, You need to:
17
18 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 1. Insert the SIM card to Sensor
20 1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
21
22 [[image:image-20230808205045-1.png||height="293" width="438"]]
23
24 After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25
26 The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
27
28 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
29 |(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
30 |(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
31 **[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
32
33 Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
34 )))|(% style="width:135px" %)
35 |(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
36 |(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
37
38
39
40 = 3. Configure to connect to different servers =
41
42 == 3.1 General UDP Connection ==
43
44
45 The NB-IoT Sensor can send packet to server use UDP protocol.
46
47
48 === 3.1.1 Simulate UDP Connection by PC tool ===
49
50
51 We can use PC tool to simulate UDP connection to make sure server works ok.
52
53 [[image:image-20230802112413-1.png]]
54
55
56 === 3.1.2 Configure NB-IoT Sensor ===
57
58 ==== 3.1.2.1 AT Commands ====
59
60
61 (% style="color:blue" %)**AT Commands:**
62
63 * (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
64
65 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
66
67 * (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
68
69 [[image:image-20230802112413-2.png]]
70
71
72 ==== 3.1.2.2 Uplink Example ====
73
74
75 [[image:image-20230802112413-3.png]]
76
77
78 == 3.2 General MQTT Connection ==
79
80
81 The NB-IoT Sensor can send packet to server use MQTT protocol.
82
83 Below are the commands.
84
85 (% style="color:blue" %)**AT Commands:**
86
87 * (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
88
89 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
90
91 * (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
92
93 * (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
94
95 * (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
96
97 * (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
98
99 * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
100
101 [[image:image-20230802112413-4.png]]
102
103 [[image:image-20230802112413-5.png]]
104
105 (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
106
107
108 == 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
109
110 === 3.3.1 Get MQTT Credentials ===
111
112
113 [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
114
115 [[image:image-20230802112413-6.png]]
116
117 [[image:image-20230802112413-7.png]]
118
119
120 === 3.3.2 Simulate with MQTT.fx ===
121
122 ==== 3.3.2.1 Establish MQTT Connection ====
123
124
125 After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
126
127 [[image:image-20230802112413-8.png]]
128
129 * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
130
131 * (% style="color:#037691" %)**Broker Port:**(%%) 1883
132
133 * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
134
135 * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
136
137 * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
138
139
140
141 ==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
142
143
144 [[image:image-20230802112413-9.png]]
145
146 [[image:image-20230802112413-10.png]]
147
148
149 (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
150
151 * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
152
153 * (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
154
155 Where 63 and 67 are the value to be published to field1 & field2.
156
157
158 (% style="color:blue" %)**Result: **
159
160 [[image:image-20230802112413-11.png]]
161
162
163 === 3.3.3 Configure NB-IoT Sensor for connection ===
164
165 ==== 3.3.3.1 AT Commands: ====
166
167
168 In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
169
170 * (% style="color:blue" %)**AT+PRO=3,1** (%%) **~/~/ Set to use ThingSpeak Server and Related Payload**
171
172 * (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
173
174 * (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
175
176 * (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
177
178 * (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
179
180 * (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
181
182
183
184 ==== 3.3.3.2 Uplink Examples ====
185
186
187 For S31-NB
188
189 For SE01-NB
190
191 For DDS20-NB
192
193 For DDS45-NB
194
195 For DDS75-NB
196
197 For NMDS120-NB
198
199 For SPH01-NB
200
201 For NLM01-NB
202
203 For NMDS200-NB
204
205 For CPN01-NB
206
207 For DS03A-NB
208
209 For SN50V3-NB
210
211
212 ==== 3.3.3.3 Map fields to sensor value ====
213
214
215 When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
216
217
218 [[image:image-20230802112413-12.png]]
219
220 [[image:image-20230802112413-13.png]]
221
222
223 Below is the NB-IoT Product Table show the mapping.
224
225 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
226 |(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
227 |(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
228 |(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
229 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
230 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 |(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
234 |(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 |(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
237 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
238 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
239 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
240 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
241 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
242 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
243 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
244
245
246
247 == 3.4 Datacake ==
248
249 === 3.4.1 Create device ===
250
251
252 [[image:image-20230808162301-1.png]]
253
254
255 [[image:image-20230808162342-2.png]]
256
257
258 [[image:image-20230808162421-3.png]]
259
260
261 The device ID needs to be filled in with IMEI, and a prefix of** 'f' **needs to be added.
262
263 [[image:image-20230808163612-7.png]]
264
265 [[image:image-20230808163035-5.png]]
266
267 [[image:image-20230808163049-6.png]]
268
269
270 === 3.4.2 Scan QR code to obtain data ===
271
272
273 Users can use their phones or computers to scan QR codes to obtain device data information.
274
275 [[image:image-20230808170051-8.png]]
276
277 [[image:image-20230808170548-9.png]]
278
279
280 === 3.4.2 AT command for connecting to DataCake ===
281
282
283 (% style="color:blue" %)**AT+PRO=2,0**
284
285 (% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
286
287
288 == 3.5 Node-Red (via MQTT) ==
289
290 === 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
291
292
293 [[image:image-20230802112413-29.png]]
294
295
296 [[image:image-20230802112413-30.png]]
297
298
299 === 3.5.2 Simulate Connection ===
300
301
302 [[image:image-20230802112413-31.png]]
303
304
305 === 3.5.3 Configure NB-IoT Sensors ===
306
307
308 * (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    **~/~/  Set to mqtt Server and  Payload**
309
310 * (% style="color:blue" %)**AT+CLIENT=any value**
311
312 * (% style="color:blue" %)**AT+UNAME=any value**
313
314 * (% style="color:blue" %)**AT+PWD=any value**
315
316 * (% style="color:blue" %)**AT+PUBTOPIC=any value**
317
318 * (% style="color:blue" %)**AT+SUBTOPIC=any value**
319
320
321
322 == 3.6 ThingsBoard.Cloud (via MQTT) ==
323
324 === 3.6.1 Configure ThingsBoard ===
325
326 ==== 3.6.1.1 Create Device ====
327
328
329 Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
330
331 [[image:image-20230802112413-32.png]]
332
333
334 ==== 3.6.1.2 Create Uplink & Downlink Converter ====
335
336
337 (% style="color:blue" %)**Uplink Converter**
338
339 The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
340
341 To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
342
343 [[image:image-20230802112413-33.png||height="732" width="1302"]]
344
345
346 (% style="color:blue" %)**Downlink Converter**
347
348 The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
349
350 [[image:image-20230802112413-34.png||height="734" width="1305"]]
351
352 (% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
353
354
355 ==== 3.6.1.3 MQTT Integration Setup ====
356
357
358 Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
359
360 [[image:image-20230802112413-35.png||height="738" width="1312"]]
361
362
363 * The next steps is to add the recently created uplink and downlink converters;
364
365 [[image:image-20230802112413-36.png||height="736" width="1308"]]
366
367 [[image:image-20230802112413-37.png||height="735" width="1307"]]
368
369
370 (% style="color:blue" %)**Add a topic filter:**
371
372 tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
373
374 You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
375
376 [[image:image-20230802112413-38.png||height="731" width="1300"]]
377
378
379 === 3.6.2 Simulate with MQTT.fx ===
380
381
382 [[image:image-20230802112413-39.png]]
383
384 [[image:image-20230802112413-40.png]]
385
386
387 === 3.6.3 Configure NB-IoT Sensor ===
388
389
390 (% style="color:blue" %)**AT Commands**
391
392 * (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
393
394 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
395
396 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
397
398 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
399
400 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
401
402 * (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
403
404
405
406 Test Uplink by click the button for 1 second
407
408 [[image:image-20230802112413-41.png]]
409
410 [[image:image-20230802112413-42.png]]
411
412 [[image:image-20230802112413-43.png]]
413
414
415 == 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
416
417 === 3.7.1 Create device & Get Credentials ===
418
419
420 We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
421
422 [[image:image-20230802112413-44.png]]
423
424 [[image:image-20230802112413-45.png]]
425
426
427 Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
428
429 [[image:image-20230802112413-46.png]]
430
431
432 The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
433
434 (% style="color:blue" %)**On the Connection Profile window, set the following information:**
435
436 * (% style="color:#037691" %)**Profile Name: “Any name”**
437
438 * (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
439
440 * (% style="color:#037691" %)**Broker Port: 8883**
441
442 * (% style="color:#037691" %)**Client ID: “Any value”**
443
444
445
446 (% style="color:blue" %)**On the section User credentials, set the following information:**
447
448 * (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
449
450 * (% style="color:#037691" %)**Password: “Your device token”**
451
452 * (% style="color:#037691" %)**PUBTOPIC: “Any value”**
453
454 * (% style="color:#037691" %)**SUBTOPIC: “Any value”**
455
456
457
458 (% style="color:blue" %)**AT command:**
459
460 * (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
461
462 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
463
464 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
465
466 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
467
468 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
469
470 * (% style="color:#037691" %)**AT+PWD=“Your device token”**
471
472
473
474 === 3.7.2 Simulate with MQTT.fx ===
475
476 [[image:image-20230802112413-52.png]]
477
478
479 [[image:image-20230808105300-2.png]]
480
481 Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
482
483 [[image:image-20230808105217-1.png]]
484
485 [[image:image-20230808105329-3.png]]
486
487
488 === 3.7.3 tago data ===
489
490
491 [[image:image-20230802112413-50.png]]
492
493 [[image:image-20230802112413-51.png||height="184" width="696"]]
494
495
496
497 == 3.8 TCP Connection ==
498
499
500 (% style="color:blue" %)**AT command:**
501
502 * (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
503
504 * (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
505
506 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
507
508
509
510 (% style="color:blue" %)**Sensor Console Output when Uplink:**
511
512 [[image:image-20230807233631-1.png]]
513
514
515 (% style="color:blue" %)**See result in TCP Server:**
516
517 [[image:image-20230807233631-2.png]]
518
519
520

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0