Version 83.8 by Xiaoling on 2023/08/09 10:56
Show last authors
1 (% class="wikigeneratedid" id="HTableofContents:" %)
2 **Table of Contents:**
3
4 {{toc/}}
5
6
7 = 1. The use of this guideline =
8
9
10 This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
11
12
13 = 2. Attach Network =
14
15
16 To attache NB-IoT sensors to NB-IoT Network, You need to:
17
18 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 1. Insert the SIM card to Sensor
20 1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
21
22 [[image:image-20230808205045-1.png||height="293" width="438"]]
23
24 After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25
26 The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
27
28 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
29 |(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
30 |(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
31 **[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
32
33 Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
34 )))|(% style="width:135px" %)
35 |(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
36 |(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
37
38
39
40 = 3. Configure to connect to different servers =
41
42 == 3.1 General UDP Connection ==
43
44
45 The NB-IoT Sensor can send packet to server use UDP protocol.
46
47
48 === 3.1.1 Simulate UDP Connection by PC tool ===
49
50
51 We can use PC tool to simulate UDP connection to make sure server works ok.
52
53 [[image:image-20230802112413-1.png]]
54
55
56 === 3.1.2 Configure NB-IoT Sensor ===
57
58 ==== 3.1.2.1 AT Commands ====
59
60
61 (% style="color:blue" %)**AT Commands:**
62
63 * (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
64
65 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
66
67 * (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
68
69 [[image:image-20230802112413-2.png]]
70
71
72 ==== 3.1.2.2 Uplink Example ====
73
74
75 [[image:image-20230802112413-3.png]]
76
77
78 == 3.2 General MQTT Connection ==
79
80
81 The NB-IoT Sensor can send packet to server use MQTT protocol.
82
83 Below are the commands.
84
85 (% style="color:blue" %)**AT Commands:**
86
87 * (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
88
89 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
90
91 * (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
92
93 * (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
94
95 * (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
96
97 * (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
98
99 * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
100
101 [[image:image-20230802112413-4.png]]
102
103 [[image:image-20230802112413-5.png]]
104
105 (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
106
107
108 == 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
109
110 === 3.3.1 Get MQTT Credentials ===
111
112
113 [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
114
115 [[image:image-20230802112413-6.png]]
116
117 [[image:image-20230802112413-7.png]]
118
119
120 === 3.3.2 Simulate with MQTT.fx ===
121
122 ==== 3.3.2.1 Establish MQTT Connection ====
123
124
125 After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
126
127 [[image:image-20230802112413-8.png]]
128
129 * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
130
131 * (% style="color:#037691" %)**Broker Port:**(%%) 1883
132
133 * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
134
135 * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
136
137 * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
138
139
140
141 ==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
142
143
144 [[image:image-20230802112413-9.png]]
145
146 [[image:image-20230802112413-10.png]]
147
148
149 (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
150
151 * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
152
153 * (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
154
155 Where 63 and 67 are the value to be published to field1 & field2.
156
157
158 (% style="color:blue" %)**Result: **
159
160 [[image:image-20230802112413-11.png]]
161
162
163 === 3.3.3 Configure NB-IoT Sensor for connection ===
164
165 ==== 3.3.3.1 AT Commands: ====
166
167
168 In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
169
170 * (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
171
172 * (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
173
174 * (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
175
176 * (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
177
178 * (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
179
180 * (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
181
182
183 ==== 3.3.3.2 Uplink Examples ====
184
185
186 For S31-NB
187
188 For SE01-NB
189
190 For DDS20-NB
191
192 For DDS45-NB
193
194 For DDS75-NB
195
196 For NMDS120-NB
197
198 For SPH01-NB
199
200 For NLM01-NB
201
202 For NMDS200-NB
203
204 For CPN01-NB
205
206 For DS03A-NB
207
208 For SN50V3-NB
209
210
211 ==== 3.3.3.3 Map fields to sensor value ====
212
213
214 When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
215
216
217 [[image:image-20230802112413-12.png]]
218
219 [[image:image-20230802112413-13.png]]
220
221
222 Below is the NB-IoT Product Table show the mapping.
223
224 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
225 |(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
226 |(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
227 |(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
228 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
229 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
230 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 |(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
233 |(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
234 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 |(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
237 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
238 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
239 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
240 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
241 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
242 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
243
244
245
246 == 3.4 Datacake ==
247
248 === 3.4.1 Create device ===
249
250
251 [[image:image-20230808162301-1.png]]
252
253
254 [[image:image-20230808162342-2.png]]
255
256
257 [[image:image-20230808162421-3.png]]
258
259
260 The device ID needs to be filled in with IMEI, and a prefix of** 'f' **needs to be added.
261
262 [[image:image-20230808163612-7.png]]
263
264 [[image:image-20230808163035-5.png]]
265
266 [[image:image-20230808163049-6.png]]
267
268
269 === 3.4.2 Scan QR code to obtain data ===
270
271
272 Users can use their phones or computers to scan QR codes to obtain device data information.
273
274 [[image:image-20230808170051-8.png]]
275
276 [[image:image-20230808170548-9.png]]
277
278
279 === 3.4.2 AT command for connecting to DataCake ===
280
281
282 (% style="color:blue" %)**AT+PRO=2,0**
283
284 (% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
285
286
287 == 3.5 Node-Red (via MQTT) ==
288
289 === 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
290
291
292 [[image:image-20230802112413-29.png]]
293
294
295 [[image:image-20230802112413-30.png]]
296
297
298 === 3.5.2 Simulate Connection ===
299
300
301 [[image:image-20230802112413-31.png]]
302
303
304 === 3.5.3 Configure NB-IoT Sensors ===
305
306
307 * (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    **~/~/  Set to mqtt Server and  Payload**
308
309 * (% style="color:blue" %)**AT+CLIENT=any value**
310
311 * (% style="color:blue" %)**AT+UNAME=any value**
312
313 * (% style="color:blue" %)**AT+PWD=any value**
314
315 * (% style="color:blue" %)**AT+PUBTOPIC=any value**
316
317 * (% style="color:blue" %)**AT+SUBTOPIC=any value**
318
319
320
321 == 3.6 ThingsBoard.Cloud (via MQTT) ==
322
323 === 3.6.1 Configure ThingsBoard ===
324
325 ==== 3.6.1.1 Create Device ====
326
327
328 Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
329
330 [[image:image-20230802112413-32.png]]
331
332
333 ==== 3.6.1.2 Create Uplink & Downlink Converter ====
334
335
336 (% style="color:blue" %)**Uplink Converter**
337
338 The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
339
340 To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
341
342 [[image:image-20230802112413-33.png||height="732" width="1302"]]
343
344
345 (% style="color:blue" %)**Downlink Converter**
346
347 The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
348
349 [[image:image-20230802112413-34.png||height="734" width="1305"]]
350
351 (% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
352
353
354 ==== 3.6.1.3 MQTT Integration Setup ====
355
356
357 Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
358
359 [[image:image-20230802112413-35.png||height="738" width="1312"]]
360
361
362 * The next steps is to add the recently created uplink and downlink converters;
363
364 [[image:image-20230802112413-36.png||height="736" width="1308"]]
365
366 [[image:image-20230802112413-37.png||height="735" width="1307"]]
367
368
369 (% style="color:blue" %)**Add a topic filter:**
370
371 tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
372
373 You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
374
375 [[image:image-20230802112413-38.png||height="731" width="1300"]]
376
377
378 === 3.6.2 Simulate with MQTT.fx ===
379
380
381 [[image:image-20230802112413-39.png]]
382
383 [[image:image-20230802112413-40.png]]
384
385
386 === 3.6.3 Configure NB-IoT Sensor ===
387
388
389 (% style="color:blue" %)**AT Commands**
390
391 * (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
392
393 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
394
395 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
396
397 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
398
399 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
400
401 * (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
402
403 Test Uplink by click the button for 1 second
404
405 [[image:image-20230802112413-41.png]]
406
407 [[image:image-20230802112413-42.png]]
408
409 [[image:image-20230802112413-43.png]]
410
411
412 == 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
413
414 === 3.7.1 Create device & Get Credentials ===
415
416
417 We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
418
419 [[image:image-20230802112413-44.png]]
420
421 [[image:image-20230802112413-45.png]]
422
423
424 Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
425
426 [[image:image-20230802112413-46.png]]
427
428
429 The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
430
431 (% style="color:blue" %)**On the Connection Profile window, set the following information:**
432
433 * (% style="color:#037691" %)**Profile Name: “Any name”**
434
435 * (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
436
437 * (% style="color:#037691" %)**Broker Port: 8883**
438
439 * (% style="color:#037691" %)**Client ID: “Any value”**
440
441 (% style="color:blue" %)**On the section User credentials, set the following information:**
442
443 * (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
444
445 * (% style="color:#037691" %)**Password: “Your device token”**
446
447 * (% style="color:#037691" %)**PUBTOPIC: “Any value”**
448
449 * (% style="color:#037691" %)**SUBTOPIC: “Any value”**
450
451
452
453 (% style="color:blue" %)**AT command:**
454
455 * (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
456
457 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
458
459 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
460
461 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
462
463 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
464
465 * (% style="color:#037691" %)**AT+PWD=“Your device token”**
466
467
468
469 === 3.7.2 Simulate with MQTT.fx ===
470
471 [[image:image-20230802112413-52.png]]
472
473
474 [[image:image-20230808105300-2.png]]
475
476 Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
477
478 [[image:image-20230808105217-1.png]]
479
480 [[image:image-20230808105329-3.png]]
481
482
483 === 3.7.3 tago data ===
484
485
486 [[image:image-20230802112413-50.png]]
487
488 [[image:image-20230802112413-51.png||height="184" width="696"]]
489
490
491
492 == 3.8 TCP Connection ==
493
494
495 (% style="color:blue" %)**AT command:**
496
497 * (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
498
499 * (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
500
501 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
502
503
504 (% style="color:blue" %)**Sensor Console Output when Uplink:**
505
506 [[image:image-20230807233631-1.png]]
507
508
509 (% style="color:blue" %)**See result in TCP Server:**
510
511 [[image:image-20230807233631-2.png]]
512
513
514

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0