Version 83.7 by Xiaoling on 2023/08/09 10:50
Show last authors
1 (% class="wikigeneratedid" id="HTableofContents:" %)
2 **Table of Contents:**
3
4 {{toc/}}
5
6
7 = 1. The use of this guideline =
8
9
10 This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
11
12
13 = 2. Attach Network =
14
15
16 To attache NB-IoT sensors to NB-IoT Network, You need to:
17
18 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 1. Insert the SIM card to Sensor
20 1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
21
22 [[image:image-20230808205045-1.png||height="293" width="438"]]
23
24 After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25
26 The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
27
28 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
29 |(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
30 |(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
31 **[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
32
33 Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
34 )))|(% style="width:135px" %)
35 |(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
36 |(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
37
38 = 3. Configure to connect to different servers =
39
40 == 3.1 General UDP Connection ==
41
42
43 The NB-IoT Sensor can send packet to server use UDP protocol.
44
45
46 === 3.1.1 Simulate UDP Connection by PC tool ===
47
48
49 We can use PC tool to simulate UDP connection to make sure server works ok.
50
51 [[image:image-20230802112413-1.png]]
52
53
54 === 3.1.2 Configure NB-IoT Sensor ===
55
56 ==== 3.1.2.1 AT Commands ====
57
58
59 (% style="color:blue" %)**AT Commands:**
60
61 * (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
62
63 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
64
65 * (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
66
67 [[image:image-20230802112413-2.png]]
68
69
70 ==== 3.1.2.2 Uplink Example ====
71
72
73 [[image:image-20230802112413-3.png]]
74
75
76 == 3.2 General MQTT Connection ==
77
78
79 The NB-IoT Sensor can send packet to server use MQTT protocol.
80
81 Below are the commands.
82
83 (% style="color:blue" %)**AT Commands:**
84
85 * (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
86
87 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
88
89 * (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
90
91 * (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
92
93 * (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
94
95 * (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
96
97 * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
98
99 [[image:image-20230802112413-4.png]]
100
101 [[image:image-20230802112413-5.png]]
102
103 (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
104
105
106 == 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
107
108 === 3.3.1 Get MQTT Credentials ===
109
110
111 [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
112
113 [[image:image-20230802112413-6.png]]
114
115 [[image:image-20230802112413-7.png]]
116
117
118 === 3.3.2 Simulate with MQTT.fx ===
119
120 ==== 3.3.2.1 Establish MQTT Connection ====
121
122
123 After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
124
125 [[image:image-20230802112413-8.png]]
126
127 * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
128
129 * (% style="color:#037691" %)**Broker Port:**(%%) 1883
130
131 * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
132
133 * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
134
135 * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
136
137 ==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
138
139
140 [[image:image-20230802112413-9.png]]
141
142 [[image:image-20230802112413-10.png]]
143
144
145 (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
146
147 * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
148
149 * (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
150
151 Where 63 and 67 are the value to be published to field1 & field2.
152
153
154 (% style="color:blue" %)**Result: **
155
156 [[image:image-20230802112413-11.png]]
157
158
159 === 3.3.3 Configure NB-IoT Sensor for connection ===
160
161 ==== 3.3.3.1 AT Commands: ====
162
163
164 In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
165
166 * (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
167
168 * (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
169
170 * (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
171
172 * (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
173
174 * (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
175
176 * (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
177
178
179
180 ==== 3.3.3.2 Uplink Examples ====
181
182
183 For S31-NB
184
185 For SE01-NB
186
187 For DDS20-NB
188
189 For DDS45-NB
190
191 For DDS75-NB
192
193 For NMDS120-NB
194
195 For SPH01-NB
196
197 For NLM01-NB
198
199 For NMDS200-NB
200
201 For CPN01-NB
202
203 For DS03A-NB
204
205 For SN50V3-NB
206
207
208 ==== 3.3.3.3 Map fields to sensor value ====
209
210
211 When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
212
213
214 [[image:image-20230802112413-12.png]]
215
216 [[image:image-20230802112413-13.png]]
217
218
219 Below is the NB-IoT Product Table show the mapping.
220
221 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
222 |(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
223 |(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
224 |(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
225 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
226 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
227 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
228 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
229 |(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
230 |(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 |(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
234 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
235 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
236 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
237 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
238 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
239 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
240
241 == 3.4 Datacake ==
242
243 === 3.4.1 Create device ===
244
245
246 [[image:image-20230808162301-1.png]]
247
248
249 [[image:image-20230808162342-2.png]]
250
251
252 [[image:image-20230808162421-3.png]]
253
254
255 The device ID needs to be filled in with IMEI, and a prefix of 'f' needs to be added.
256
257 [[image:image-20230808163612-7.png]]
258
259 [[image:image-20230808163035-5.png]]
260
261 [[image:image-20230808163049-6.png]]
262
263
264 === 3.4.2 Scan QR code to obtain data ===
265
266
267 Users can use their phones or computers to scan QR codes to obtain device data information.
268
269 [[image:image-20230808170051-8.png]]
270
271 [[image:image-20230808170548-9.png]]
272
273
274 === 3.4.2 AT command for connecting to DataCake ===
275
276
277 (% style="color:blue" %)**AT+PRO=2,0**
278
279 (% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
280
281
282 == 3.5 Node-Red (via MQTT) ==
283
284 === 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
285
286
287 [[image:image-20230802112413-29.png]]
288
289
290 [[image:image-20230802112413-30.png]]
291
292
293 === 3.5.2 Simulate Connection ===
294
295
296 [[image:image-20230802112413-31.png]]
297
298
299 === 3.5.3 Configure NB-IoT Sensors ===
300
301
302 * (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/  Set to mqtt Server and  Payload
303
304 * (% style="color:blue" %)**AT+CLIENT=any value**
305
306 * (% style="color:blue" %)**AT+UNAME=any value**
307
308 * (% style="color:blue" %)**AT+PWD=any value**
309
310 * (% style="color:blue" %)**AT+PUBTOPIC=any value**
311
312 * (% style="color:blue" %)**AT+SUBTOPIC=any value**
313
314 == 3.6 ThingsBoard.Cloud (via MQTT) ==
315
316 === 3.6.1 Configure ThingsBoard ===
317
318 ==== 3.6.1.1 Create Device ====
319
320
321 Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
322
323 [[image:image-20230802112413-32.png]]
324
325
326 ==== 3.6.1.2 Create Uplink & Downlink Converter ====
327
328
329 (% style="color:blue" %)**Uplink Converter**
330
331 The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
332
333 To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
334
335 [[image:image-20230802112413-33.png||height="732" width="1302"]]
336
337
338 (% style="color:blue" %)**Downlink Converter**
339
340 The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
341
342 [[image:image-20230802112413-34.png||height="734" width="1305"]]
343
344 (% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
345
346
347 ==== 3.6.1.3 MQTT Integration Setup ====
348
349
350 Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
351
352 [[image:image-20230802112413-35.png||height="738" width="1312"]]
353
354
355 * The next steps is to add the recently created uplink and downlink converters;
356
357 [[image:image-20230802112413-36.png||height="736" width="1308"]]
358
359 [[image:image-20230802112413-37.png||height="735" width="1307"]]
360
361
362 (% style="color:blue" %)**Add a topic filter:**
363
364 tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
365
366 You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
367
368 [[image:image-20230802112413-38.png||height="731" width="1300"]]
369
370
371 === 3.6.2 Simulate with MQTT.fx ===
372
373
374 [[image:image-20230802112413-39.png]]
375
376 [[image:image-20230802112413-40.png]]
377
378
379 === 3.6.3 Configure NB-IoT Sensor ===
380
381
382 (% style="color:blue" %)**AT Commands**
383
384 * (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
385
386 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
387
388 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
389
390 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
391
392 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
393
394 * (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
395
396 Test Uplink by click the button for 1 second
397
398 [[image:image-20230802112413-41.png]]
399
400 [[image:image-20230802112413-42.png]]
401
402 [[image:image-20230802112413-43.png]]
403
404
405 == 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
406
407 === 3.7.1 Create device & Get Credentials ===
408
409
410 We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
411
412 [[image:image-20230802112413-44.png]]
413
414 [[image:image-20230802112413-45.png]]
415
416
417 Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
418
419 [[image:image-20230802112413-46.png]]
420
421
422 The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
423
424 On the Connection Profile window, set the following information:
425
426 * (% style="color:blue" %)**Profile Name: “Any name”**
427
428 * (% style="color:blue" %)**Broker Address: mqtt.tago.io**
429
430 * (% style="color:blue" %)**Broker Port: 8883**
431
432 * (% style="color:blue" %)**Client ID: “Any value”**
433
434 On the section User credentials, set the following information:
435
436 * (% style="color:blue" %)**User Name: “Any value”** (%%) ~/~/ Tago validates your user by the token only
437
438 * (% style="color:blue" %)**Password: “Your device token”**
439
440 * (% style="color:blue" %)**PUBTOPIC: “Any value”**
441
442 * (% style="color:blue" %)**SUBTOPIC: “Any value”**
443
444 (% style="color:blue" %)**AT command:**
445
446 * (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) ~/~/ hex format or json format
447
448 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
449
450 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
451
452 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
453
454 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
455
456 * (% style="color:#037691" %)**AT+PWD=“Your device token”**
457
458
459
460
461 === 3.7.2 Simulate with MQTT.fx ===
462
463 [[image:image-20230802112413-52.png]]
464
465
466 [[image:image-20230808105300-2.png]]
467
468 Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
469
470 [[image:image-20230808105217-1.png]]
471
472 [[image:image-20230808105329-3.png]]
473
474
475 === 3.7.3 tago data ===
476
477
478 [[image:image-20230802112413-50.png]]
479
480 [[image:image-20230802112413-51.png||height="184" width="696"]]
481
482
483
484 == 3.8 TCP Connection ==
485
486
487 (% style="color:blue" %)**AT command:**
488
489 * (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
490
491 * (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
492
493 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
494
495
496
497 (% style="color:blue" %)**Sensor Console Output when Uplink:**
498
499 [[image:image-20230807233631-1.png]]
500
501
502 (% style="color:blue" %)**See result in TCP Server:**
503
504 [[image:image-20230807233631-2.png]]
505
506
507

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0