Version 81.1 by David Huang on 2023/08/08 17:08
Show last authors
1 == **Table of Contents:** ==
2
3 {{toc/}}
4
5
6 = 1. The use of this guideline =
7
8
9 This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
10
11
12 = 2. Attach Network =
13
14
15 To attache NB-IoT sensors to NB-IoT Network, You need to:
16
17 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
18 1. Insert the SIM card to Sensor
19 1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
20
21 (% class="mark" %)插入 SIM 卡图片
22
23 After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
24
25 The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
26
27 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
28 |(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
29 |(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
30 **[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
31
32 Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
33 )))|(% style="width:135px" %)
34 |(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
35 |(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
36
37 = 3. Configure to connect to different servers =
38
39 == 3.1 General UDP Connection ==
40
41
42 The NB-IoT Sensor can send packet to server use UDP protocol.
43
44
45 === 3.1.1 Simulate UDP Connection by PC tool ===
46
47
48 We can use PC tool to simulate UDP connection to make sure server works ok.
49
50 [[image:image-20230802112413-1.png]]
51
52
53 === 3.1.2 Configure NB-IoT Sensor ===
54
55 ==== 3.1.2.1 AT Commands ====
56
57
58 (% style="color:blue" %)**AT Commands:**
59
60 * (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
61
62 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
63
64 * (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
65
66 [[image:image-20230802112413-2.png]]
67
68
69 ==== 3.1.2.2 Uplink Example ====
70
71
72 [[image:image-20230802112413-3.png]]
73
74
75 == 3.2 General MQTT Connection ==
76
77
78 The NB-IoT Sensor can send packet to server use MQTT protocol.
79
80 Below are the commands.
81
82 (% style="color:blue" %)**AT Commands:**
83
84 * (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
85
86 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
87
88 * (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
89
90 * (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
91
92 * (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
93
94 * (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
95
96 * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
97
98 [[image:image-20230802112413-4.png]]
99
100 [[image:image-20230802112413-5.png]]
101
102 (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
103
104
105 == 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
106
107 === 3.3.1 Get MQTT Credentials ===
108
109
110 [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
111
112 [[image:image-20230802112413-6.png]]
113
114 [[image:image-20230802112413-7.png]]
115
116
117 === 3.3.2 Simulate with MQTT.fx ===
118
119 ==== 3.3.2.1 Establish MQTT Connection ====
120
121
122 After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
123
124 [[image:image-20230802112413-8.png]]
125
126 * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
127
128 * (% style="color:#037691" %)**Broker Port:**(%%) 1883
129
130 * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
131
132 * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
133
134 * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
135
136 ==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
137
138
139 [[image:image-20230802112413-9.png]]
140
141 [[image:image-20230802112413-10.png]]
142
143
144 (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
145
146 * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
147
148 * (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
149
150 Where 63 and 67 are the value to be published to field1 & field2.
151
152
153 (% style="color:blue" %)**Result: **
154
155 [[image:image-20230802112413-11.png]]
156
157
158 === 3.3.3 Configure NB-IoT Sensor for connection ===
159
160 ==== 3.3.3.1 AT Commands: ====
161
162
163 In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
164
165 * (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
166
167 * (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
168
169 * (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
170
171 * (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
172
173 * (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
174
175 * (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
176
177 ==== 3.3.3.2 Uplink Examples ====
178
179
180 For S31-NB
181
182 For SE01-NB
183
184 For DDS20-NB
185
186 For DDS45-NB
187
188 For DDS75-NB
189
190 For NMDS120-NB
191
192 For SPH01-NB
193
194 For NLM01-NB
195
196 For NMDS200-NB
197
198 For CPN01-NB
199
200 For DS03A-NB
201
202 For SN50V3-NB
203
204
205 ==== 3.3.3.3 Map fields to sensor value ====
206
207
208 When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
209
210
211 [[image:image-20230802112413-12.png]]
212
213 [[image:image-20230802112413-13.png]]
214
215
216 Below is the NB-IoT Product Table show the mapping.
217
218 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1386px" %)
219 |(% style="background-color:#4f81bd; width:124px" %) |(% style="background-color:#4f81bd; color:white; width:91px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:159px" %)Field3|(% style="background-color:#4f81bd; color:white; width:153px" %)Field4|(% style="background-color:#4f81bd; color:white; width:152px" %)Field5|(% style="background-color:#4f81bd; color:white; width:148px" %)Field6|(% style="background-color:#4f81bd; color:white; width:164px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:66px" %)Field9|(% style="background-color:#4f81bd; color:white; width:66px" %)Field10
220 |(% style="background-color:#4f81bd; color:white; width:124px" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 |(% style="background-color:#4f81bd; color:white; width:124px" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
222 |(% style="background-color:#4f81bd; color:white; width:124px" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
223 |(% style="background-color:#4f81bd; color:white; width:124px" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
224 |(% style="background-color:#4f81bd; color:white; width:124px" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
225 |(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
226 |(% rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
227 |(% style="background-color:#4f81bd; color:white; width:124px" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
228 |(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
229 |(% style="background-color:#4f81bd; color:white; width:124px" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
230 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
231 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
232 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
233 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
234 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
235 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
236 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
237
238 == 3.4 Datacake ==
239
240 === 3.4.1 Create device ===
241
242 [[image:image-20230808162301-1.png]]
243
244
245 [[image:image-20230808162342-2.png]]
246
247
248 [[image:image-20230808162421-3.png]]
249
250 The device ID needs to be filled in with IMEI, and a prefix of 'f' needs to be added.
251
252 [[image:image-20230808163612-7.png]]
253
254 [[image:image-20230808163035-5.png]]
255
256 [[image:image-20230808163049-6.png]]
257
258 (% class="wikigeneratedid" %)
259 === 3.4.2 Scan QR code to obtain data ===
260
261 Users can use their phones or computers to scan QR codes to obtain device data information.
262
263 [[image:image-20230808170051-8.png]]
264
265 [[image:image-20230808170548-9.png]]
266
267 === 3.4.2 AT command for connecting to DataCake ===
268
269 **AT+PRO=2,0**
270
271 **AT+SERVADDR=67.207.76.90,4445**
272
273
274 == 3.5 Node-Red (via MQTT) ==
275
276 === 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
277
278
279 [[image:image-20230802112413-29.png]]
280
281
282 [[image:image-20230802112413-30.png]]
283
284
285 === 3.5.2 Simulate Connection ===
286
287
288 [[image:image-20230802112413-31.png]]
289
290
291 === 3.5.3 Configure NB-IoT Sensors ===
292
293
294 * (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/  Set to mqtt Server and  Payload
295
296 * (% style="color:blue" %)**AT+CLIENT=any value**
297
298 * (% style="color:blue" %)**AT+UNAME=any value**
299
300 * (% style="color:blue" %)**AT+PWD=any value**
301
302 * (% style="color:blue" %)**AT+PUBTOPIC=any value**
303
304 * (% style="color:blue" %)**AT+SUBTOPIC=any value**
305
306 == 3.6 ThingsBoard.Cloud (via MQTT) ==
307
308 === 3.6.1 Configure ThingsBoard ===
309
310 ==== 3.6.1.1 Create Device ====
311
312
313 Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
314
315 [[image:image-20230802112413-32.png]]
316
317
318 ==== 3.6.1.2 Create Uplink & Downlink Converter ====
319
320
321 (% style="color:blue" %)**Uplink Converter**
322
323 The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
324
325 To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
326
327 [[image:image-20230802112413-33.png||height="732" width="1302"]]
328
329
330 (% style="color:blue" %)**Downlink Converter**
331
332 The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
333
334 [[image:image-20230802112413-34.png||height="734" width="1305"]]
335
336 (% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
337
338
339 ==== 3.6.1.3 MQTT Integration Setup ====
340
341
342 Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
343
344 [[image:image-20230802112413-35.png||height="738" width="1312"]]
345
346
347 * The next steps is to add the recently created uplink and downlink converters;
348
349 [[image:image-20230802112413-36.png||height="736" width="1308"]]
350
351 [[image:image-20230802112413-37.png||height="735" width="1307"]]
352
353
354 (% style="color:blue" %)**Add a topic filter:**
355
356 tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
357
358 You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
359
360 [[image:image-20230802112413-38.png||height="731" width="1300"]]
361
362
363 === 3.6.2 Simulate with MQTT.fx ===
364
365
366 [[image:image-20230802112413-39.png]]
367
368 [[image:image-20230802112413-40.png]]
369
370
371 === 3.6.3 Configure NB-IoT Sensor ===
372
373
374 (% style="color:blue" %)**AT Commands**
375
376 * (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
377
378 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>** (%%)
379 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
380 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
381 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
382 * (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
383
384 Test Uplink by click the button for 1 second
385
386 [[image:image-20230802112413-41.png]]
387
388 [[image:image-20230802112413-42.png]]
389
390 [[image:image-20230802112413-43.png]]
391
392
393 == 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
394
395 === 3.7.1 Create device & Get Credentials ===
396
397
398 We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
399
400 [[image:image-20230802112413-44.png]]
401
402 [[image:image-20230802112413-45.png]]
403
404
405 Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
406
407 [[image:image-20230802112413-46.png]]
408
409
410 The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
411
412 On the Connection Profile window, set the following information:
413
414 * (% style="color:blue" %)**Profile Name: “Any name”**
415
416 * (% style="color:blue" %)**Broker Address: mqtt.tago.io**
417
418 * (% style="color:blue" %)**Broker Port: 8883**
419
420 * (% style="color:blue" %)**Client ID: “Any value”**
421
422 On the section User credentials, set the following information:
423
424 * (% style="color:blue" %)**User Name: “Any value”** (%%) ~/~/ Tago validates your user by the token only
425
426 * (% style="color:blue" %)**Password: “Your device token”**
427
428 * (% style="color:blue" %)**PUBTOPIC: “Any value”**
429
430 * (% style="color:blue" %)**SUBTOPIC: “Any value”**
431
432 (% style="color:blue" %)**AT command:**
433
434 * **AT+PRO=3,0 or 3,5   **~/~/ hex format or json format
435
436 * **AT+SUBTOPIC=<device name>** **or User Defined**
437 * **AT+PUBTOPIC=<device name>or User Defined**
438 * **AT+CLIENT=<device name> or User Defined**
439 * **AT+UNAME=<device name> or User Defined**
440 * **AT+PWD=“Your device token”**
441
442 === 3.7.2 Simulate with MQTT.fx ===
443
444 [[image:image-20230802112413-52.png]]
445
446
447 [[image:image-20230808105300-2.png]]
448
449 Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
450
451 [[image:image-20230808105217-1.png]]
452
453 [[image:image-20230808105329-3.png]]
454
455
456 === 3.7.3 tago data ===
457
458
459 [[image:image-20230802112413-50.png]]
460
461 [[image:image-20230802112413-51.png||height="184" width="696"]]
462
463
464
465 == 3.8 TCP Connection ==
466
467
468 * **AT+PRO=4,0   ** ~/~/ Set to use TCP protocol to uplink(HEX format)
469 * **AT+PRO=4,1   ** ~/~/ Set to use TCP protocol to uplink(JSON format)
470 * **AT+SERVADDR=120.24.4.116,5600   **~/~/ to set TCP server address and port
471
472 **Sensor Console Output when Uplink**
473
474 [[image:image-20230807233631-1.png]]
475
476
477 **See result in TCP Server**
478
479 [[image:image-20230807233631-2.png]]
480
481
482

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0