Version 67.1 by David Huang on 2023/08/08 10:52
Show last authors
1 == **Table of Contents:** ==
2
3 {{toc/}}
4
5
6 = 1. The use of this guideline =
7
8
9 This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
10
11
12 = 2. Attach Network =
13
14
15 To attache NB-IoT sensors to NB-IoT Network, You need to:
16
17 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
18 1. Insert the SIM card to Sensor
19 1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
20
21 (% class="mark" %)插入 SIM 卡图片
22
23 After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
24
25 The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
26
27 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
28 |(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
29 |(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
30 **[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
31
32 Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
33 )))|(% style="width:135px" %)
34 |(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
35 |(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
36
37 = 3. Configure to connect to different servers =
38
39 == 3.1 General UDP Connection ==
40
41
42 The NB-IoT Sensor can send packet to server use UDP protocol.
43
44
45 === 3.1.1 Simulate UDP Connection by PC tool ===
46
47
48 We can use PC tool to simulate UDP connection to make sure server works ok.
49
50 [[image:image-20230802112413-1.png]]
51
52
53 === 3.1.2 Configure NB-IoT Sensor ===
54
55 ==== 3.1.2.1 AT Commands ====
56
57
58 (% style="color:blue" %)**AT Commands:**
59
60 * (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
61
62 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
63
64 * (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
65
66 [[image:image-20230802112413-2.png]]
67
68
69 ==== 3.1.2.2 Uplink Example ====
70
71
72 [[image:image-20230802112413-3.png]]
73
74
75 == 3.2 General MQTT Connection ==
76
77
78 The NB-IoT Sensor can send packet to server use MQTT protocol.
79
80 Below are the commands.
81
82 (% style="color:blue" %)**AT Commands:**
83
84 * (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
85
86 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
87
88 * (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
89
90 * (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
91
92 * (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
93
94 * (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
95
96 * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
97
98 [[image:image-20230802112413-4.png]]
99
100 [[image:image-20230802112413-5.png]]
101
102 (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
103
104
105 == 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
106
107 === 3.3.1 Get MQTT Credentials ===
108
109
110 [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
111
112 [[image:image-20230802112413-6.png]]
113
114 [[image:image-20230802112413-7.png]]
115
116
117 === 3.3.2 Simulate with MQTT.fx ===
118
119 ==== 3.3.2.1 Establish MQTT Connection ====
120
121
122 After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
123
124 [[image:image-20230802112413-8.png]]
125
126 * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
127
128 * (% style="color:#037691" %)**Broker Port:**(%%) 1883
129
130 * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
131
132 * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
133
134 * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
135
136 ==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
137
138
139 [[image:image-20230802112413-9.png]]
140
141 [[image:image-20230802112413-10.png]]
142
143
144 (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
145
146 * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
147
148 * (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
149
150 Where 63 and 67 are the value to be published to field1 & field2.
151
152
153 (% style="color:blue" %)**Result: **
154
155 [[image:image-20230802112413-11.png]]
156
157
158 === 3.3.3 Configure NB-IoT Sensor for connection ===
159
160 ==== 3.3.3.1 AT Commands: ====
161
162
163 In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
164
165 * (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
166
167 * (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
168
169 * (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
170
171 * (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
172
173 * (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
174
175 * (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
176
177 ==== 3.3.3.2 Uplink Examples ====
178
179
180 For S31-NB
181
182 For SE01-NB
183
184 For DDS20-NB
185
186 For DDS45-NB
187
188 For DDS75-NB
189
190 For NMDS120-NB
191
192 For SPH01-NB
193
194 For NLM01-NB
195
196 For NMDS200-NB
197
198 For CPN01-NB
199
200 For DS03A-NB
201
202 For SN50V3-NB
203
204
205 ==== 3.3.3.3 Map fields to sensor value ====
206
207
208 When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
209
210
211 [[image:image-20230802112413-12.png]]
212
213 [[image:image-20230802112413-13.png]]
214
215
216 Below is the NB-IoT Product Table show the mapping.
217
218 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1386px" %)
219 |(% style="background-color:#4f81bd; width:124px" %) |(% style="background-color:#4f81bd; color:white; width:91px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:159px" %)Field3|(% style="background-color:#4f81bd; color:white; width:153px" %)Field4|(% style="background-color:#4f81bd; color:white; width:152px" %)Field5|(% style="background-color:#4f81bd; color:white; width:148px" %)Field6|(% style="background-color:#4f81bd; color:white; width:164px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:66px" %)Field9|(% style="background-color:#4f81bd; color:white; width:66px" %)Field10
220 |(% style="background-color:#4f81bd; color:white; width:124px" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 |(% style="background-color:#4f81bd; color:white; width:124px" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
222 |(% style="background-color:#4f81bd; color:white; width:124px" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
223 |(% style="background-color:#4f81bd; color:white; width:124px" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
224 |(% style="background-color:#4f81bd; color:white; width:124px" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
225 |(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
226 |(% rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
227 |(% style="background-color:#4f81bd; color:white; width:124px" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
228 |(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
229 |(% style="background-color:#4f81bd; color:white; width:124px" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
230 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
231 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
232 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
233 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
234 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
235 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
236 |(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
237
238 == 3.4 Datacake ==
239
240
241
242
243 == 3.5 Node-Red (via MQTT) ==
244
245 === 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
246
247
248 [[image:image-20230802112413-29.png]]
249
250
251 [[image:image-20230802112413-30.png]]
252
253
254 === 3.5.2 Simulate Connection ===
255
256
257 [[image:image-20230802112413-31.png]]
258
259
260 === 3.5.3 Configure NB-IoT Sensors ===
261
262
263 * (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/  Set to mqtt Server and  Payload
264
265 * (% style="color:blue" %)**AT+CLIENT=any value**
266
267 * (% style="color:blue" %)**AT+UNAME=any value**
268
269 * (% style="color:blue" %)**AT+PWD=any value**
270
271 * (% style="color:blue" %)**AT+PUBTOPIC=any value**
272
273 * (% style="color:blue" %)**AT+SUBTOPIC=any value**
274
275 == 3.6 ThingsBoard.Cloud (via MQTT) ==
276
277 === 3.6.1 Configure ThingsBoard ===
278
279 ==== 3.6.1.1 Create Device ====
280
281
282 Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
283
284 [[image:image-20230802112413-32.png]]
285
286
287 ==== 3.6.1.2 Create Uplink & Downlink Converter ====
288
289
290 (% style="color:blue" %)**Uplink Converter**
291
292 The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
293
294 To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
295
296 [[image:image-20230802112413-33.png||height="732" width="1302"]]
297
298
299 (% style="color:blue" %)**Downlink Converter**
300
301 The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
302
303 [[image:image-20230802112413-34.png||height="734" width="1305"]]
304
305 (% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
306
307
308 ==== 3.6.1.3 MQTT Integration Setup ====
309
310
311 Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
312
313 [[image:image-20230802112413-35.png||height="738" width="1312"]]
314
315
316 * The next steps is to add the recently created uplink and downlink converters;
317
318 [[image:image-20230802112413-36.png||height="736" width="1308"]]
319
320 [[image:image-20230802112413-37.png||height="735" width="1307"]]
321
322
323 (% style="color:blue" %)**Add a topic filter:**
324
325 tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
326
327 You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
328
329 [[image:image-20230802112413-38.png||height="731" width="1300"]]
330
331
332 === 3.6.2 Simulate with MQTT.fx ===
333
334
335 [[image:image-20230802112413-39.png]]
336
337 [[image:image-20230802112413-40.png]]
338
339
340 === 3.6.3 Configure NB-IoT Sensor ===
341
342
343 (% style="color:blue" %)**AT Commands**
344
345 * (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
346
347 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>** (%%)
348 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
349 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
350 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
351 * (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
352
353 Test Uplink by click the button for 1 second
354
355 [[image:image-20230802112413-41.png]]
356
357 [[image:image-20230802112413-42.png]]
358
359 [[image:image-20230802112413-43.png]]
360
361
362 == 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
363
364 === 3.7.1 Create device & Get Credentials ===
365
366
367 We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
368
369 [[image:image-20230802112413-44.png]]
370
371 [[image:image-20230802112413-45.png]]
372
373
374 Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
375
376 [[image:image-20230802112413-46.png]]
377
378
379 On the Connection Profile window, set the following information: **(这边加一个截图)**
380
381 * (% style="color:blue" %)**Profile Name: “Any name”**
382
383 * (% style="color:blue" %)**Broker Address: mqtt.tago.io**
384
385 * (% style="color:blue" %)**Broker Port: 1883**
386
387 * (% style="color:blue" %)**Client ID: “Any value”**
388
389 On the section User credentials, set the following information: **(这边加一个截图)**
390
391 * (% style="color:blue" %)**User Name: “Any value”**  (%%) ~/~/  Tago validates your user by the token only
392
393 * (% style="color:blue" %)**Password: “Your device token”**
394
395 * (% style="color:blue" %)**PUBTOPIC: “Any value”**
396
397 * (% style="color:blue" %)**SUBTOPIC: “Any value”**
398
399 === 3.7.2 Simulate with MQTT.fx ===
400
401
402 [[image:image-20230802112413-47.png]]
403
404 [[image:image-20230802112413-48.png]]
405
406 Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
407
408
409 [[image:image-20230802112413-49.png]]
410
411
412 === 3.7.3 tago data ===
413
414
415 [[image:image-20230802112413-50.png]]
416
417 [[image:image-20230802112413-51.png||height="184" width="696"]]
418
419
420 === 3.7.4 TLS mode ===
421
422
423 Users can choose to use (% style="color:blue" %)**SSL/TLS**(%%) mode.
424
425 On the SSL/TLS section, check the option **Enable SSL/TLS**, and click OK.
426
427 The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
428
429 * (% style="color:blue" %)**Profile Name: “Any name”**
430
431 * (% style="color:blue" %)**Broker Address: mqtt.tago.io**
432
433 * (% style="color:blue" %)**Broker Port: 8883**
434
435 * (% style="color:blue" %)**Client ID: “Any value”**
436
437 * (% style="color:blue" %)**User Name: “Any value”** (%%) ~/~/ Tago validates your user by the token only
438
439 * (% style="color:blue" %)**Password: “Your device token”**
440
441 * (% style="color:blue" %)**PUBTOPIC: “Any value”**
442
443 * (% style="color:blue" %)**SUBTOPIC: “Any value”**
444
445 [[image:image-20230802112413-52.png]]
446
447
448 == 3.8 TCP Connection ==
449
450
451 * **AT+PRO=4,0   ** ~/~/ Set to use TCP protocol to uplink(HEX format)
452 * **AT+PRO=4,1   ** ~/~/ Set to use TCP protocol to uplink(JSON format)
453 * **AT+SERVADDR=120.24.4.116,5600   **~/~/ to set TCP server address and port
454
455 **Sensor Console Output when Uplink**
456
457 [[image:image-20230807233631-1.png]]
458
459
460 **See result in TCP Server**
461
462 [[image:image-20230807233631-2.png]]
463
464
465
466

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0