General Configure/Commands to Connect to IoT server for -NB & -NS NB-IoT models

1

(% class="wikigeneratedid" id="HTableofContents:" %)

2

**Table of Contents:**

= 1. The use of this guideline =

12

13

14

This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.

15

16

17

= 2. Attach Network =

18

19

== 2.1 General Configure to attach network ==

20

21

22

To attache NB-IoT sensors to NB-IoT Network, You need to:

23

24

1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)

25

1. Power Off End Node ( See below for the power off/on position)

26

1. Insert the SIM card to Sensor. ( See below for direction)

27

1. Power On End Node

28

1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)

29

30

[[image:image-20240208102804-1.png||height="286" width="696"]]

31

32

[[image:image-20230808205045-1.png||height="293" width="438"]]

33

34

After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .

35

36

The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.

37

38

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)

39

|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**

40

|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((

41

**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**

42

43

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands

44

)))|(% style="width:135px" %)

45

|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)

46

|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)

47

48

== 2.2 Speed Up Network Attach time ==

49

50

51

BC660K-GL supports multi bands (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85. **(%%) It will search one by one and try to attach, this will take a lot of time and even cause attach fail and show Signal Strenght:99. User can lock the band to specify band for its operator to make this faster.

52

53

(% style="color:#037691" %)**AT+QBAND? **(%%) ~/~/ Check what is the current used frequency band

54

(% style="color:#037691" %)**AT+QBAND=1,4 **(%%) ~/~/ Set to use 1 frequency band. Band4

55

(% style="color:#037691" %)**Europe General**(%%) **AT+QBAND=2,8,20 ** ~/~/ Set to use 2 frequency bands. Band 8 and Band 20

56

(% style="color:#037691" %)**Global General**(%%) : **AT+QBAND=10,8,20,28,2,4,12,13,66,85,5**

57

58

(% style="color:#037691" %)**Verizon**(%%)** ** AT+QBAND=1,13

59

(% style="color:#037691" %)**AT&T**(%%) AT+QBAND=3,12,4,2

60

(% style="color:#037691" %)**Telstra**(%%) AT+QBAND=1,28

61

(% style="color:#037691" %)**Softband**(%%) AT+QBAND=2,3,8

62

63

After connection is successful, user can use (% style="color:#037691" %)**AT+QENG=0 **(%%) to check which band is actually in used.

64

65

66

See bands used for different provider:** [[NB-IoT Deployment , Bands, Operator list>>http://wiki.dragino.com/xwiki/bin/view/Main/NB-IoT%20Deployment%20%2C%20Bands%2C%20Operator%20list/]]**

67

68

69

= 3. Configure to connect to different servers =

70

71

== 3.1 General UDP Connection ==

72

73

74

The NB-IoT Sensor can send packet to server use UDP protocol.

75

76

77

=== 3.1.1 Simulate UDP Connection by PC tool ===

78

79

80

We can use PC tool to simulate UDP connection to make sure server works ok.

81

82

[[image:image-20230802112413-1.png||height="468" width="1024"]]

83

84

85

=== 3.1.2 Configure NB-IoT Sensor ===

86

87

==== 3.1.2.1 AT Commands ====

88

89

90

(% style="color:blue" %)**AT Commands:**

91

92

* (% style="color:#037691" %)**AT+PRO=2,0** (%%) ~/~/ Set to use UDP protocol to uplink ,Payload Type select Hex payload

93

94

* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601** (%%) ~/~/ Set UDP server address and port

95

96

[[image:image-20230802112413-2.png]]

97

98

99

==== 3.1.2.2 Uplink Example ====

100

101

102

[[image:image-20230802112413-3.png]]

103

104

105

== 3.2 General MQTT Connection ==

106

107

108

The NB-IoT Sensor can send packet to server use MQTT protocol.

109

110

Below are the commands.

111

112

(% style="color:blue" %)**AT Commands:**

113

114

* (% style="color:#037691" %)**AT+PRO=3,0** (%%) ~/~/ Set to use MQTT protocol to uplink, Payload Type select Hex payload.

115

116

* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883** (%%) ~/~/ Set MQTT server address and port

117

118

* (% style="color:#037691" %)**AT+CLIENT=CLIENT** (%%) ~/~/ Set up the CLIENT of MQTT

119

120

* (% style="color:#037691" %)**AT+UNAME=UNAME** (%%) ~/~/ Set the username of MQTT

121

122

* (% style="color:#037691" %)**AT+PWD=PWD** (%%) ~/~/ Set the password of MQTT

123

124

* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB** (%%) ~/~/ Set the sending topic of MQTT

125

126

* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB** (%%) ~/~/ Set the subscription topic of MQTT

127

128

[[image:image-20230802112413-4.png]]

129

130

[[image:image-20230802112413-5.png||height="530" width="987"]]

131

132

(% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.**

133

134

135

== 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==

136

137

=== 3.3.1 Get MQTT Credentials ===

138

139

140

[[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.

141

142

[[image:image-20230802112413-6.png||height="336" width="925"]]

143

144

[[image:image-20230802112413-7.png]]

145

146

147

=== 3.3.2 Simulate with MQTT.fx ===

148

149

==== 3.3.2.1 Establish MQTT Connection ====

150

151

152

After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.

153

154

[[image:image-20230802112413-8.png]]

155

156

* (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com

157

158

* (% style="color:#037691" %)**Broker Port:**(%%) 1883

159

160

* (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>

161

162

* (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>

163

164

* (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>

165

166

==== 3.3.2.2 Publish Data to ThingSpeak Channel ====

167

168

169

[[image:image-20230802112413-9.png]]

170

171

[[image:image-20230802112413-10.png]]

172

173

174

(% style="color:blue" %)**In MQTT.fx, we can publish below info:**

175

176

* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish

177

178

* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH

179

180

Where 63 and 67 are the value to be published to field1 & field2.

181

182

183

(% style="color:blue" %)**Result: **

184

185

[[image:image-20230802112413-11.png||height="539" width="901"]]

186

187

188

=== 3.3.3 Configure NB-IoT Sensor for connection ===

189

190

==== 3.3.3.1 AT Commands: ====

191

192

193

In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx

194

195

* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload

196

197

* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**

198

199

* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**

200

201

* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**

202

203

* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**

204

205

* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**

206

207

==== 3.3.3.2 Uplink Examples ====

208

209

210

[[image:image-20230816201942-1.png]]

For SE01-NB

For DDS20-NB

For DDS45-NB

For DDS75-NB

For NMDS120-NB

For SPH01-NB

For NLM01-NB

For NMDS200-NB

For CPN01-NB

For DS03A-NB

For SN50V3-NB

==== 3.3.3.3 Map fields to sensor value ====

236

237

238

When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.

239

240

241

[[image:image-20230802112413-12.png||height="504" width="1011"]]

242

243

[[image:image-20230802112413-13.png||height="331" width="978"]]

244

245

246

Below is the NB-IoT Product Table show the mapping.

247

248

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)

249

|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10

|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI

261

|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)

262

|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)

263

|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)

264

|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)

265

|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)

266

|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)

267

268

== 3.4 [[Datacake>>https://datacake.co/]] ==

269

270

271

(% class="wikigeneratedid" %)

272

Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,

273

274

275

(% class="wikigeneratedid" %)

276

As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**

277

278

* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.

279

280

* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.

281

282

=== 3.4.1 For device Already has template ===

283

284

==== 3.4.1.1 Create Device ====

285

286

(% style="color:blue" %)**Add Device**(%%) in DataCake.

287

288

[[image:image-20230808162301-1.png||height="453" width="952"]]

289

290

291

[[image:image-20230808162342-2.png||height="541" width="952"]]

292

293

294

(% style="color:blue" %)**Choose the correct model**(%%) from template.

295

296

[[image:image-20230808162421-3.png]]

297

298

299

(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.

300

301

[[image:image-20230808163612-7.png||height="549" width="952"]]

302

303

[[image:image-20230808163035-5.png]]

304

305

[[image:image-20230808163049-6.png||height="544" width="926"]]

306

307

308

=== 3.4.2 For Device already registered in DataCake before shipped ===

309

310

==== 3.4.2.1 Scan QR Code to get the device info ====

311

312

313

Users can use their phones or computers to scan QR codes to obtain device data information.

314

315

[[image:image-20230808170051-8.png||height="255" width="259"]]

316

317

[[image:image-20230808170548-9.png]]

318

319

320

==== 3.4.2.2 Claim Device to User Account ====

321

322

323

By Default, the device is registered in Dragino's DataCake Account. User can Claim it to his account.

324

325

326

=== 3.4.3 Manual Add Decoder in DataCake ( don't use the template in DataCake) ===

327

328

329

**Step1: Add a device**

330

331

[[image:image-20240129170024-1.png||height="330" width="900"]]

332

333

334

**Step2: Choose your device type,please select dragino NB-IOT device**

335

336

[[image:image-20240129170216-2.png||height="534" width="643"]]

337

338

339

**Step3: Choose to create a new device**

340

341

[[image:image-20240129170539-3.png||height="459" width="646"]]

342

343

344

**Step4: Fill in the device ID of your NB device**

345

346

[[image:image-20240202111546-1.png||height="378" width="651"]]

347

348

349

**Step5: Please select your device plan according to your needs and complete the creation of the device**

350

351

[[image:image-20240129171236-6.png||height="450" width="648"]]

352

353

354

**Step6: Please add the decoder at the payload decoder of the device configuration.**

355

356

**Decoder location:**[[dragino-end-node-decoder/Datacake-Dragino_NB at main · dragino/dragino-end-node-decoder (github.com)>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Datacake-Dragino_NB]]

357

358

[[image:image-20240129172056-7.png||height="457" width="816"]]

359

360

[[image:image-20240129173116-9.png||height="499" width="814"]]

361

362

363

**Step7: Add the output of the decoder as a field**

364

365

[[image:image-20240129173541-10.png||height="592" width="968"]]

366

367

368

**Step8: Customize the dashboard and use fields as parameters of the dashboard**

369

370

[[image:image-20240129174518-11.png||height="147" width="1042"]]

371

372

[[image:image-20240129174657-12.png||height="538" width="916"]]

373

374

[[image:image-20240129174840-13.png||height="536" width="750"]]

375

376

377

=== 3.4.4 For device have not configured to connect to DataCake ===

(% class="lead" %)

Use AT command for connecting to DataCake

382

383

(% style="color:blue" %)**AT+PRO=2,0**

384

385

(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**

386

387

388

== 3.5 Node-Red (via MQTT) ==

389

390

=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===

391

392

393

Take S31-NB UDP protocol as an example.

394

395

Dragino provides input flow examples for the sensors.

396

397

User can download the required JSON file through Dragino Node-RED input flow template.

398

399

Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]

400

401

We can directly import the template.

402

403

The templates for S31-NB and NB95S31B are the same.

404

405

406

[[image:image-20230809173127-4.png]]

407

408

409

Please select the NB95S31B template.

410

411

[[image:image-20230809173310-5.png||height="558" width="926"]]

412

413

[[image:image-20230809173438-6.png]]

414

415

[[image:image-20230809173800-7.png]]

416

417

418

Successfully imported template.

419

420

[[image:image-20230809173835-8.png||height="515" width="860"]]

421

422

423

Users can set UDP port.

424

425

[[image:image-20230809174053-9.png]]

426

427

428

=== 3.5.2 Simulate Connection ===

429

430

431

We have completed the configuration of UDP. We can try sending packets to node red.

432

433

[[image:image-20230810083934-1.png]]

434

435

[[image:image-20230810084048-2.png||height="535" width="1052"]]

436

437

438

=== 3.5.3 Configure NB-IoT Sensors ===

439

440

441

* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**

442

* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**

443

* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**

444

* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**

445

* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**

446

* (% style="color:#037691" %)**AT+PWD=“Your device token”**

447

448

== 3.6 ThingsBoard.Cloud (via MQTT) ==

449

450

=== 3.6.1 Configure ThingsBoard ===

451

452

==== 3.6.1.1 Create Device ====

453

454

455

Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.

456

457

[[image:image-20230802112413-32.png||height="583" width="1066"]]

458

459

460

==== 3.6.1.2 Create Uplink & Downlink Converter ====

461

462

463

(% style="color:blue" %)**Uplink Converter**

464

465

The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.

466

467

To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.

468

469

[[image:image-20230802112413-33.png||height="597" width="1061"]]

470

471

472

(% style="color:blue" %)**Downlink Converter**

473

474

The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke

475

476

[[image:image-20230802112413-34.png||height="598" width="1063"]]

477

478

(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**

479

480

481

==== 3.6.1.3 MQTT Integration Setup ====

482

483

484

Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;

485

486

[[image:image-20230802112413-35.png||height="597" width="1062"]]

487

488

489

* The next steps is to add the recently created uplink and downlink converters;

490

491

[[image:image-20230802112413-36.png||height="598" width="1062"]]

492

493

[[image:image-20230802112413-37.png||height="598" width="1064"]]

494

495

496

(% style="color:blue" %)**Add a topic filter:**

497

498

Consistent with the theme of the node setting.

499

500

You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;

501

502

[[image:image-20230802112413-38.png||height="598" width="1064"]]

503

504

505

=== 3.6.2 Simulate with MQTT.fx ===

506

507

508

[[image:image-20230802112413-39.png]]

509

510

[[image:image-20230802112413-40.png||height="525" width="980"]]

511

512

513

=== 3.6.3 Configure NB-IoT Sensor ===

514

515

516

(% style="color:blue" %)**AT Commands**

517

518

* (% style="color:#037691" %)**AT+PRO=3,3 **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.

519

520

* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**

521

522

* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**

523

524

* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**

525

526

* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**

527

528

* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**

529

530

Test Uplink by click the button for 1 second

531

532

[[image:image-20230802112413-41.png||height="496" width="828"]]

533

534

[[image:image-20230802112413-42.png]]

535

536

[[image:image-20230802112413-43.png||height="407" width="825"]]

537

538

539

== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==

540

541

=== 3.7.1 Create device & Get Credentials ===

542

543

544

We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.

545

546

[[image:image-20230802112413-44.png]]

547

548

[[image:image-20230802112413-45.png]]

549

550

551

Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.

552

553

[[image:image-20230802112413-46.png]]

554

555

556

The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.

557

558

(% style="color:blue" %)**On the Connection Profile window, set the following information:**

559

560

* (% style="color:#037691" %)**Profile Name: “Any name”**

561

562

* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**

563

564

* (% style="color:#037691" %)**Broker Port: 8883**

565

566

* (% style="color:#037691" %)**Client ID: “Any value”**

567

568

(% style="color:blue" %)**On the section User credentials, set the following information:**

569

570

* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**

571

572

* (% style="color:#037691" %)**Password: “Your device token”**

573

574

* (% style="color:#037691" %)**PUBTOPIC: “Any value”**

575

576

* (% style="color:#037691" %)**SUBTOPIC: “Any value”**

577

578

(% style="color:blue" %)**AT command:**

579

580

* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**

581

582

* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**

583

584

* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**

585

586

* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**

587

588

* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**

589

590

* (% style="color:#037691" %)**AT+PWD=“Your device token”**

591

592

=== 3.7.2 Simulate with MQTT.fx ===

593

594

595

[[image:image-20230802112413-52.png]]

596

597

598

[[image:image-20230808105300-2.png||height="553" width="1026"]]

599

600

601

Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.

602

603

[[image:image-20230808105217-1.png||height="556" width="1031"]]

604

605

[[image:image-20230808105329-3.png]]

606

607

608

=== 3.7.3 tago data ===

609

610

611

[[image:image-20230802112413-50.png||height="242" width="1037"]]

612

613

[[image:image-20230802112413-51.png||height="184" width="696"]]

614

615

616

== 3.8 TCP Connection ==

617

618

619

(% style="color:blue" %)**AT command:**

620

621

* (% style="color:#037691" %)**AT+PRO=4,0 ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)

622

623

* (% style="color:#037691" %)**AT+PRO=4,1 ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)

624

625

* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port

626

627

(% style="color:blue" %)**Sensor Console Output when Uplink:**

628

629

[[image:image-20230807233631-1.png]]

630

631

632

(% style="color:blue" %)**See result in TCP Server:**

633

634

[[image:image-20230807233631-2.png]]

= 4. FAQ =

== 4.1 What is the usage of Multi Sampling and One Uplink? ==

640

641

642

The NB series has the feature for Multi Sampling and one uplink. See one of them

643

644

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-NB_BN-IoT_Sensor_Node_User_Manual/#H2.5Multi-SamplingsandOneuplink>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-NB_BN-IoT_Sensor_Node_User_Manual/#H2.5Multi-SamplingsandOneuplink]]

645

646

User can use this feature for below purpose:

647

648

1. **Reduce power consumption**. The NB-IoT transmit power is much more higher than the sensor sampling power. To save battery life, we can sampling often and send in one uplink.

649

1. Give more sampling data points.

650

1. Increase reliable in transmission. For example. If user set

651

1*. **AT+TR=1800** ~/~/ The unit is seconds, and the default is to record data once every 1800 seconds (30 minutes, the minimum can be set to 180 seconds)

652

1*. **AT+NOUD=24** ~/~/ The device uploads 24 sets of recorded data by default. Up to 32 sets of record data can be uploaded.

653

1*. **AT+TDC=7200** ~/~/ Uplink every 2 hours.

654

1*. this will mean each uplink will actually include the 6 uplink data (24 set data which cover 12 hours). So if device doesn;t lost 6 continue data. There will not data lost.

655

656

== 4.2 Why the uplink JSON format is not standard? ==

657

658

659

The json format in uplink packet is not standard Json format. Below is the example. This is to make the payload as short as possible, due to NB-IoT transmit limition, a standard Json is not able to include 32 sets of sensors data with timestamp.

660

661

[[image:image-20240229233154-1.png]]

662

663

664

= 5. Trouble Shooting: =

665

666

== 5.1 Checklist for debuging Network Connection issue. Signal Strenght:99 issue. ==

667

668

669

There are many different providers provide NB-IoT service in the world. They might use different band, different APN & different operator configuration. Which makes connection to NB-IoT network is complicate.

670

671

If end device successfully attached NB-IoT Network, User can normally see the signal strengh as below (between 0~~31)

672

673

[[image:image-20240207002003-1.png]]

674

675

676

If fail to attach network, it will shows signal 99. as below:

677

678

[[image:image-20240207002129-2.png]]

(% class="lead" %)

When see this issue, below are the checklist:

683

684

* Does your SIM card support NB-IoT network? If SIM card doesn't not specify support NB-IoT clearly, normally it doesn't support. You need to confirm with your operator.

685

* Do you configure the correct APN? [[Check here for APN settings>>http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.1GeneralConfiguretoattachnetwork]].

686

* Do you lock the frequency band? This is the most case we see. [[Explain and Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/General%20Configure%20to%20Connect%20to%20IoT%20server%20for%20-NB%20%26%20-NS%20NB-IoT%20models/#H2.2SpeedUpNetworkAttachtime]].

687

* Check if the device is attached to Carrier network but reject. (need to check with operator).

688

* Check if the antenna is connected firmly.

689

690

If you have check all above and still fail. please send console log files (as many as possible) to [[support@dragino.com>>mailto:support@dragino.com]] so we can check.

691

692

693

== 5.2 Issue: "NBIOT did not respond" ==

694

695

696

(% class="box errormessage" %)

697

(((

698

11:24:22.397 [44596]NBIOT did not respond.

699

11:24:24.315 [46530]NBIOT did not respond.

700

11:24:26.256 [48464]NBIOT did not respond.

701

11:24:28.196 [50398]NBIOT did not respond.

702

11:24:30.115 [52332]NBIOT did not respond.

703

11:24:32.127 [54266]NBIOT did not respond.

704

11:24:32.127 [54299]Restart the module...

705

11:24:39.181 [61332]No response when shutting down

706

)))

707

708

This issue might due to initiate issue for NB-IoT module. In this case, please try:

1) Open Enclosure

2) Power off device by pull out the power on Jumper

713

714

3) Power on device by connect back the power jumper.

715

716

4) push reset button.

717

718

[[image:image-20240208001740-1.png]]

719

720

721

== 5.3 Issue: "Failed to readI MSI number" ==

722

723

724

(% class="box errormessage" %)

725

(((

726

[18170]Failed to read IMSI:1umber.

727

[20109]Failed to read IMSI numoer.

728

[22048]Failed to read IMSI number.

729

[29842lRestart the module...

730

)))

731

732

Make sure that the SIM card is insert in correct direction and device is power off/on during insert. Here is reference link: [[Insert SIM Card>>||anchor="H2.1GeneralConfiguretoattachnetwork"]].

733

734

735

== 5.4 Why sometime the AT Command is slow in reponse? ==

736

737

738

When the MCU is communicating with the NB-IoT module, the MCU response of AT Command will become slower, it might takes several seconds to response.

739

740

[[image:image-20240226111928-1.png]]

741

742

743

Wiki source code of General Configure/Commands to Connect to IoT server for -NB & -NS NB-IoT models

Applications

Navigation