Version 126.1 by Edwin Chen on 2024/02/02 11:48
Hide last authors
Xiaoling 83.3 1 (% class="wikigeneratedid" id="HTableofContents:" %)
2 **Table of Contents:**
Xiaoling 53.3 3
4 {{toc/}}
5
6
Xiaoling 100.2 7
8
9
10
Edwin Chen 1.1 11 = 1. The use of this guideline =
12
Xiaoling 1.2 13
Edwin Chen 1.1 14 This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
15
16
Edwin Chen 55.1 17 = 2. Attach Network =
Edwin Chen 1.1 18
Edwin Chen 103.1 19 == 2.1 General Configure to attach network ==
Edwin Chen 1.1 20
Xiaoling 104.4 21
Edwin Chen 54.1 22 To attache NB-IoT sensors to NB-IoT Network, You need to:
23
24 1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
25 1. Insert the SIM card to Sensor
Edwin Chen 99.1 26 1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
Edwin Chen 54.1 27
Edwin Chen 83.1 28 [[image:image-20230808205045-1.png||height="293" width="438"]]
Edwin Chen 60.1 29
Edwin Chen 54.1 30 After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
31
Xiaoling 1.3 32 The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
Edwin Chen 1.1 33
Edwin Chen 54.1 34 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
Edwin Chen 99.1 35 |(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
Xiaoling 56.2 36 |(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
Edwin Chen 54.1 37 **[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
Edwin Chen 1.1 38
Edwin Chen 54.1 39 Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
40 )))|(% style="width:135px" %)
Edwin Chen 57.1 41 |(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
David Huang 66.1 42 |(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
Xiaoling 53.27 43
Edwin Chen 103.1 44 == 2.2 Speed Up Network Attach time ==
Xiaoling 99.3 45
Xiaoling 104.2 46
Edwin Chen 103.1 47 BC660K-GL supports multi bands (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85. **(%%) It will search one by one and try to attach, this will take a lot of time and even cause attach fail. User can lock the band to specify band for its operator to make this faster.
Xiaoling 102.2 48
Edwin Chen 107.1 49 (% style="color:#037691" %)**AT+QBAND?       **(%%) ~/~/ Check what is the current used frequency band
Edwin Chen 103.1 50
Edwin Chen 107.1 51 (% style="color:#037691" %)**AT+QBAND=1,4    **(%%) ~/~/ Set to use 1 frequency band. Band4
Edwin Chen 103.1 52
Edwin Chen 107.1 53 (% style="color:#037691" %)**AT+QBAND=2,8,20 **(%%) ~/~/ Set to use 2 frequency bands. Band 8 and Band 20
Edwin Chen 104.1 54
Xiaoling 104.4 55
Edwin Chen 107.1 56 After connection is successful, user can use (% style="color:#037691" %)**AT+QENG=0 **(%%) to check which band is actually in used.
57
58
Edwin Chen 105.1 59 See bands used for different provider:** [[NB-IoT Deployment , Bands, Operator list>>http://wiki.dragino.com/xwiki/bin/view/Main/NB-IoT%20Deployment%20%2C%20Bands%2C%20Operator%20list/]]**
60
61
Edwin Chen 1.1 62 = 3. Configure to connect to different servers =
63
Xiaoling 53.3 64 == 3.1 General UDP Connection ==
Xiaoling 53.2 65
66
67 The NB-IoT Sensor can send packet to server use UDP protocol.
68
69
Xiaoling 53.3 70 === 3.1.1 Simulate UDP Connection by PC tool ===
71
72
Xiaoling 53.2 73 We can use PC tool to simulate UDP connection to make sure server works ok.
74
Xiaoling 105.2 75 [[image:image-20230802112413-1.png||height="468" width="1024"]]
Xiaoling 53.2 76
77
Xiaoling 53.3 78 === 3.1.2 Configure NB-IoT Sensor ===
Xiaoling 53.2 79
Xiaoling 53.3 80 ==== 3.1.2.1 AT Commands ====
Xiaoling 53.2 81
Xiaoling 53.3 82
Xiaoling 53.4 83 (% style="color:blue" %)**AT Commands:**
Xiaoling 53.3 84
Xiaoling 53.5 85 * (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
Xiaoling 53.8 86
Xiaoling 53.5 87 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
Xiaoling 53.8 88
Xiaoling 53.5 89 * (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
Xiaoling 53.2 90
91 [[image:image-20230802112413-2.png]]
92
93
Xiaoling 53.3 94 ==== 3.1.2.2 Uplink Example ====
Xiaoling 53.2 95
Xiaoling 53.3 96
Xiaoling 53.2 97 [[image:image-20230802112413-3.png]]
98
99
Xiaoling 53.7 100 == 3.2 General MQTT Connection ==
Xiaoling 53.2 101
Xiaoling 53.6 102
Xiaoling 53.2 103 The NB-IoT Sensor can send packet to server use MQTT protocol.
104
Xiaoling 53.6 105 Below are the commands.
Xiaoling 53.2 106
Xiaoling 53.8 107 (% style="color:blue" %)**AT Commands:**
Xiaoling 53.2 108
Xiaoling 53.9 109 * (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
Xiaoling 53.2 110
Xiaoling 53.9 111 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
Xiaoling 53.8 112
Xiaoling 53.9 113 * (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
Xiaoling 53.8 114
Xiaoling 53.9 115 * (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
Xiaoling 53.8 116
Xiaoling 53.9 117 * (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
Xiaoling 53.8 118
119 * (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
120
121 * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
122
Xiaoling 53.2 123 [[image:image-20230802112413-4.png]]
124
Edwin Chen 102.1 125 [[image:image-20230802112413-5.png||height="530" width="987"]]
Xiaoling 53.2 126
Xiaoling 53.9 127 (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
Xiaoling 53.2 128
129
Xiaoling 53.7 130 == 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
Xiaoling 53.2 131
Xiaoling 53.9 132 === 3.3.1 Get MQTT Credentials ===
Xiaoling 53.2 133
Xiaoling 53.9 134
Xiaoling 53.2 135 [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
136
Edwin Chen 102.1 137 [[image:image-20230802112413-6.png||height="336" width="925"]]
Xiaoling 53.2 138
139 [[image:image-20230802112413-7.png]]
140
141
Xiaoling 53.27 142 === 3.3.2 Simulate with MQTT.fx ===
Xiaoling 53.2 143
Xiaoling 53.27 144 ==== 3.3.2.1 Establish MQTT Connection ====
Xiaoling 53.2 145
Xiaoling 53.9 146
Xiaoling 53.2 147 After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
148
149 [[image:image-20230802112413-8.png]]
150
Xiaoling 53.9 151 * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
Xiaoling 53.2 152
Xiaoling 53.9 153 * (% style="color:#037691" %)**Broker Port:**(%%) 1883
Xiaoling 53.10 154
Xiaoling 53.9 155 * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
Xiaoling 53.10 156
Xiaoling 53.9 157 * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
Xiaoling 53.10 158
Xiaoling 53.9 159 * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
Xiaoling 53.2 160
Xiaoling 53.28 161 ==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
162
163
Xiaoling 53.2 164 [[image:image-20230802112413-9.png]]
165
166 [[image:image-20230802112413-10.png]]
167
Xiaoling 53.43 168
Xiaoling 53.10 169 (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
Xiaoling 53.2 170
Xiaoling 53.10 171 * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
Xiaoling 53.2 172
Xiaoling 53.10 173 * (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
174
Xiaoling 53.2 175 Where 63 and 67 are the value to be published to field1 & field2.
176
177
Xiaoling 53.10 178 (% style="color:blue" %)**Result: **
Xiaoling 53.2 179
Edwin Chen 102.1 180 [[image:image-20230802112413-11.png||height="539" width="901"]]
Xiaoling 53.2 181
182
Xiaoling 53.28 183 === 3.3.3 Configure NB-IoT Sensor for connection ===
Xiaoling 53.2 184
Xiaoling 53.28 185 ==== 3.3.3.1 AT Commands: ====
Xiaoling 53.2 186
Xiaoling 53.10 187
Xiaoling 53.2 188 In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
189
Xiaoling 99.3 190 * (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
Xiaoling 53.9 191
Xiaoling 53.26 192 * (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
Xiaoling 53.9 193
Xiaoling 53.26 194 * (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
Xiaoling 53.9 195
Xiaoling 53.26 196 * (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
Xiaoling 53.9 197
Xiaoling 53.26 198 * (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
Xiaoling 53.9 199
Xiaoling 53.26 200 * (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
Xiaoling 53.2 201
Xiaoling 53.28 202 ==== 3.3.3.2 Uplink Examples ====
Xiaoling 53.10 203
Xiaoling 104.4 204
Edwin Chen 102.1 205 [[image:image-20230816201942-1.png]]
Xiaoling 53.10 206
Xiaoling 53.2 207 For SE01-NB
208
209 For DDS20-NB
210
211 For DDS45-NB
212
213 For DDS75-NB
214
215 For NMDS120-NB
216
217 For SPH01-NB
218
219 For NLM01-NB
220
221 For NMDS200-NB
222
223 For CPN01-NB
224
225 For DS03A-NB
226
227 For SN50V3-NB
228
229
Xiaoling 53.28 230 ==== 3.3.3.3 Map fields to sensor value ====
Xiaoling 53.2 231
Xiaoling 53.10 232
Xiaoling 53.2 233 When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
234
235
Edwin Chen 102.1 236 [[image:image-20230802112413-12.png||height="504" width="1011"]]
Xiaoling 53.2 237
Edwin Chen 102.1 238 [[image:image-20230802112413-13.png||height="331" width="978"]]
Xiaoling 53.2 239
240
241 Below is the NB-IoT Product Table show the mapping.
242
Xiaoling 83.4 243 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
244 |(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
245 |(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
246 |(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
247 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
248 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
249 |(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
250 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
251 |(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
252 |(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
253 |(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
254 |(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
255 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
256 |(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
257 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
258 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
259 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
260 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
261 |(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
Xiaoling 53.2 262
Edwin Chen 100.1 263 == 3.4 [[Datacake>>https://datacake.co/]] ==
Xiaoling 99.3 264
Xiaoling 53.2 265
Edwin Chen 100.1 266 (% class="wikigeneratedid" %)
267 Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
268
269
270 (% class="wikigeneratedid" %)
Xiaoling 100.5 271 As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**
Edwin Chen 100.1 272
Xiaoling 100.2 273 * (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
Edwin Chen 100.1 274
Xiaoling 100.2 275 * (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
Edwin Chen 100.1 276
Edwin Chen 109.1 277 === 3.4.1 For device Already has template ===
Xiaoling 53.2 278
Edwin Chen 109.1 279 ==== 3.4.1.1 Create Device ====
Xiaoling 83.4 280
Xiaoling 100.4 281 (% style="color:blue" %)**Add Device**(%%) in DataCake.
Edwin Chen 100.1 282
Xiaoling 105.2 283 [[image:image-20230808162301-1.png||height="453" width="952"]]
Xiaoling 53.11 284
285
Xiaoling 105.2 286 [[image:image-20230808162342-2.png||height="541" width="952"]]
David Huang 78.1 287
288
Xiaoling 100.3 289 (% style="color:blue" %)**Choose the correct model**(%%) from template.
Edwin Chen 100.1 290
David Huang 78.1 291 [[image:image-20230808162421-3.png]]
292
Xiaoling 83.4 293
Xiaoling 100.3 294 (% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
David Huang 78.1 295
Xiaoling 105.2 296 [[image:image-20230808163612-7.png||height="549" width="952"]]
David Huang 78.1 297
298 [[image:image-20230808163035-5.png]]
299
Xiaoling 105.2 300 [[image:image-20230808163049-6.png||height="544" width="926"]]
David Huang 78.1 301
Xiaoling 83.4 302
Edwin Chen 109.1 303 === 3.4.2 For Device already registered in DataCake before shipped ===
David Huang 81.1 304
Edwin Chen 126.1 305 ==== 3.4.2.1 Scan QR Code to get the device info ====
Xiaoling 83.4 306
David Huang 81.1 307 Users can use their phones or computers to scan QR codes to obtain device data information.
308
Edwin Chen 100.1 309 [[image:image-20230808170051-8.png||height="255" width="259"]]
David Huang 81.1 310
311 [[image:image-20230808170548-9.png]]
312
Xiaoling 83.4 313
Edwin Chen 126.1 314 ==== 3.4.2.2 Claim Device to User Account ====
315
316 By Default, the device is registered in Dragino's DataCake Account. User can Claim it to his account.
317
318
319
Edwin Chen 109.1 320 === 3.4.3 Manual Add Decoder in DataCake ( don't use the template in DataCake) ===
David Huang 81.1 321
Bei Jinggeng 123.1 322 **Step1:Add a device**
David Huang 81.1 323
Bei Jinggeng 123.1 324 [[image:image-20240129170024-1.png||height="330" width="900"]]
325
326 **Step2:Choose your device type,please select dragino NB-IOT device**
327
328 [[image:image-20240129170216-2.png||height="534" width="643"]]
329
330 **Step3:Choose to create a new device**
331
332 [[image:image-20240129170539-3.png||height="459" width="646"]]
333
334 **Step4:Fill in the device ID of your NB device**
335
Bei Jinggeng 125.1 336 [[image:image-20240202111546-1.png||height="378" width="651"]]
Bei Jinggeng 123.1 337
338 **Step5:Please select your device plan according to your needs and complete the creation of the device**
339
340 [[image:image-20240129171236-6.png||height="450" width="648"]]
341
342 **Step6:Please add the decoder at the payload decoder of the device configuration.**
343
344 [[image:image-20240129172056-7.png||height="457" width="816"]]
345
346 [[image:image-20240129173116-9.png||height="499" width="814"]]
347
348 **Step6:Add the output of the decoder as a field**
349
350 [[image:image-20240129173541-10.png||height="592" width="968"]]
351
352 **Step7:Customize the dashboard and use fields as parameters of the dashboard**
353
354 [[image:image-20240129174518-11.png||height="147" width="1042"]]
355
356 [[image:image-20240129174657-12.png||height="538" width="916"]]
357
358 [[image:image-20240129174840-13.png||height="536" width="750"]]
359
360
Edwin Chen 109.1 361 === 3.4.4 For device have not configured to connect to DataCake ===
362
363 (% class="lead" %)
364 Use AT command for connecting to DataCake
365
Xiaoling 83.4 366 (% style="color:blue" %)**AT+PRO=2,0**
David Huang 81.1 367
Xiaoling 83.4 368 (% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
David Huang 81.1 369
Xiaoling 83.4 370
Xiaoling 53.21 371 == 3.5 Node-Red (via MQTT) ==
Xiaoling 53.2 372
Xiaoling 53.48 373 === 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
Xiaoling 53.2 374
Xiaoling 53.32 375
David Huang 93.1 376 Take S31-NB UDP protocol as an example.
Xiaoling 53.2 377
David Huang 93.1 378 Dragino provides input flow examples for the sensors.
Xiaoling 53.32 379
David Huang 93.1 380 User can download the required JSON file through Dragino Node-RED input flow template.
Xiaoling 53.2 381
David Huang 93.1 382 Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
Xiaoling 53.24 383
David Huang 93.1 384 We can directly import the template.
Xiaoling 53.2 385
David Huang 93.1 386 The templates for S31-NB and NB95S31B are the same.
Xiaoling 53.21 387
Xiaoling 53.2 388
David Huang 93.1 389 [[image:image-20230809173127-4.png]]
Xiaoling 53.2 390
Xiaoling 99.3 391
David Huang 93.1 392 Please select the NB95S31B template.
Xiaoling 53.2 393
Xiaoling 105.2 394 [[image:image-20230809173310-5.png||height="558" width="926"]]
Xiaoling 53.2 395
David Huang 93.1 396 [[image:image-20230809173438-6.png]]
Xiaoling 53.2 397
David Huang 93.1 398 [[image:image-20230809173800-7.png]]
Xiaoling 53.21 399
Xiaoling 99.3 400
David Huang 93.1 401 Successfully imported template.
Xiaoling 53.21 402
Xiaoling 105.2 403 [[image:image-20230809173835-8.png||height="515" width="860"]]
Xiaoling 53.21 404
405
David Huang 93.1 406 Users can set UDP port.
Xiaoling 53.21 407
David Huang 93.1 408 [[image:image-20230809174053-9.png]]
Xiaoling 83.8 409
Xiaoling 99.3 410
David Huang 93.1 411 === 3.5.2 Simulate Connection ===
Xiaoling 83.8 412
Xiaoling 99.3 413
David Huang 93.1 414 We have completed the configuration of UDP. We can try sending packets to node red.
415
David Huang 98.1 416 [[image:image-20230810083934-1.png]]
David Huang 93.1 417
Xiaoling 105.2 418 [[image:image-20230810084048-2.png||height="535" width="1052"]]
David Huang 93.1 419
Xiaoling 105.2 420
David Huang 93.1 421 === 3.5.3 Configure NB-IoT Sensors ===
422
423
Saxer Lin 106.1 424 * (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
425 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
426 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
427 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
428 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
429 * (% style="color:#037691" %)**AT+PWD=“Your device token”**
David Huang 93.1 430
Xiaoling 53.21 431 == 3.6 ThingsBoard.Cloud (via MQTT) ==
432
433 === 3.6.1 Configure ThingsBoard ===
434
Xiaoling 53.22 435 ==== 3.6.1.1 Create Device ====
Xiaoling 53.2 436
Xiaoling 53.32 437
Edwin Chen 59.1 438 Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
Xiaoling 53.2 439
Xiaoling 105.2 440 [[image:image-20230802112413-32.png||height="583" width="1066"]]
Xiaoling 53.2 441
442
Xiaoling 53.23 443 ==== 3.6.1.2 Create Uplink & Downlink Converter ====
444
Xiaoling 53.32 445
Xiaoling 53.22 446 (% style="color:blue" %)**Uplink Converter**
Xiaoling 53.2 447
448 The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
449
Xiaoling 53.42 450 To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
Xiaoling 53.2 451
Xiaoling 105.2 452 [[image:image-20230802112413-33.png||height="597" width="1061"]]
Xiaoling 53.2 453
454
Xiaoling 53.22 455 (% style="color:blue" %)**Downlink Converter**
Xiaoling 53.2 456
457 The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
458
Xiaoling 105.2 459 [[image:image-20230802112413-34.png||height="598" width="1063"]]
Xiaoling 53.2 460
Xiaoling 83.8 461 (% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
Xiaoling 53.2 462
Xiaoling 53.22 463
Xiaoling 53.23 464 ==== 3.6.1.3 MQTT Integration Setup ====
Xiaoling 53.2 465
466
Xiaoling 53.44 467 Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
Xiaoling 53.24 468
Xiaoling 105.2 469 [[image:image-20230802112413-35.png||height="597" width="1062"]]
Xiaoling 53.2 470
Xiaoling 53.32 471
Xiaoling 53.2 472 * The next steps is to add the recently created uplink and downlink converters;
473
Xiaoling 105.2 474 [[image:image-20230802112413-36.png||height="598" width="1062"]]
Xiaoling 53.2 475
Xiaoling 105.2 476 [[image:image-20230802112413-37.png||height="598" width="1064"]]
Xiaoling 53.2 477
Xiaoling 53.33 478
Xiaoling 53.24 479 (% style="color:blue" %)**Add a topic filter:**
Xiaoling 53.2 480
Mengting Qiu 108.1 481 Consistent with the theme of the node setting.
Xiaoling 53.2 482
483 You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
484
Xiaoling 105.2 485 [[image:image-20230802112413-38.png||height="598" width="1064"]]
Xiaoling 53.2 486
487
Xiaoling 53.23 488 === 3.6.2 Simulate with MQTT.fx ===
489
Xiaoling 53.32 490
Xiaoling 53.2 491 [[image:image-20230802112413-39.png]]
492
Xiaoling 105.2 493 [[image:image-20230802112413-40.png||height="525" width="980"]]
Xiaoling 53.2 494
495
Xiaoling 53.23 496 === 3.6.3 Configure NB-IoT Sensor ===
Xiaoling 53.2 497
Xiaoling 53.25 498
Xiaoling 53.23 499 (% style="color:blue" %)**AT Commands**
Xiaoling 53.2 500
Edwin Chen 59.1 501 * (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
Xiaoling 53.2 502
Xiaoling 83.4 503 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
504
Edwin Chen 59.1 505 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
Xiaoling 83.4 506
Edwin Chen 59.1 507 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
Xiaoling 83.4 508
Edwin Chen 59.1 509 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
Xiaoling 83.4 510
Edwin Chen 59.1 511 * (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
Xiaoling 53.2 512
513 Test Uplink by click the button for 1 second
514
Xiaoling 105.2 515 [[image:image-20230802112413-41.png||height="496" width="828"]]
Xiaoling 53.2 516
517 [[image:image-20230802112413-42.png]]
518
Xiaoling 105.2 519 [[image:image-20230802112413-43.png||height="407" width="825"]]
Xiaoling 53.2 520
521
Xiaoling 53.23 522 == 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
Xiaoling 53.2 523
Xiaoling 53.23 524 === 3.7.1 Create device & Get Credentials ===
Xiaoling 53.2 525
Xiaoling 53.23 526
Xiaoling 53.2 527 We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
528
529 [[image:image-20230802112413-44.png]]
530
531 [[image:image-20230802112413-45.png]]
532
533
534 Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
535
536 [[image:image-20230802112413-46.png]]
537
538
David Huang 70.1 539 The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
Xiaoling 53.2 540
Xiaoling 83.8 541 (% style="color:blue" %)**On the Connection Profile window, set the following information:**
David Huang 70.1 542
Xiaoling 83.8 543 * (% style="color:#037691" %)**Profile Name: “Any name”**
Xiaoling 53.2 544
Xiaoling 83.8 545 * (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
Xiaoling 53.23 546
Xiaoling 83.8 547 * (% style="color:#037691" %)**Broker Port: 8883**
Xiaoling 53.23 548
Xiaoling 83.8 549 * (% style="color:#037691" %)**Client ID: “Any value”**
Xiaoling 53.23 550
Xiaoling 83.8 551 (% style="color:blue" %)**On the section User credentials, set the following information:**
Xiaoling 53.2 552
Xiaoling 83.8 553 * (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
Xiaoling 53.2 554
Xiaoling 83.8 555 * (% style="color:#037691" %)**Password: “Your device token”**
Xiaoling 53.2 556
Xiaoling 83.8 557 * (% style="color:#037691" %)**PUBTOPIC: “Any value”**
Xiaoling 53.23 558
Xiaoling 83.8 559 * (% style="color:#037691" %)**SUBTOPIC: “Any value”**
Xiaoling 53.23 560
David Huang 70.1 561 (% style="color:blue" %)**AT command:**
562
Xiaoling 83.8 563 * (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
David Huang 70.1 564
Xiaoling 83.5 565 * (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
David Huang 70.1 566
Xiaoling 83.5 567 * (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
568
569 * (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
570
571 * (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
572
573 * (% style="color:#037691" %)**AT+PWD=“Your device token”**
574
Xiaoling 53.23 575 === 3.7.2 Simulate with MQTT.fx ===
576
Xiaoling 99.3 577
David Huang 70.1 578 [[image:image-20230802112413-52.png]]
Xiaoling 53.23 579
Xiaoling 53.2 580
Xiaoling 105.2 581 [[image:image-20230808105300-2.png||height="553" width="1026"]]
Xiaoling 53.2 582
Xiaoling 99.3 583
Xiaoling 53.38 584 Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
Xiaoling 53.2 585
Xiaoling 105.2 586 [[image:image-20230808105217-1.png||height="556" width="1031"]]
Xiaoling 53.44 587
David Huang 70.1 588 [[image:image-20230808105329-3.png]]
Xiaoling 53.2 589
590
Xiaoling 53.23 591 === 3.7.3 tago data ===
Xiaoling 53.2 592
Xiaoling 53.23 593
Xiaoling 105.2 594 [[image:image-20230802112413-50.png||height="242" width="1037"]]
Xiaoling 53.2 595
Edwin Chen 59.1 596 [[image:image-20230802112413-51.png||height="184" width="696"]]
Xiaoling 53.2 597
598
Edwin Chen 65.1 599 == 3.8 TCP Connection ==
Edwin Chen 63.1 600
Xiaoling 83.6 601
Xiaoling 83.5 602 (% style="color:blue" %)**AT command:**
Edwin Chen 63.1 603
Xiaoling 83.5 604 * (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
Edwin Chen 63.1 605
Xiaoling 83.5 606 * (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
Edwin Chen 63.1 607
Xiaoling 83.8 608 * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
Xiaoling 83.5 609
Xiaoling 83.6 610 (% style="color:blue" %)**Sensor Console Output when Uplink:**
Xiaoling 83.5 611
Edwin Chen 63.1 612 [[image:image-20230807233631-1.png]]
613
614
Xiaoling 83.6 615 (% style="color:blue" %)**See result in TCP Server:**
Edwin Chen 63.1 616
617 [[image:image-20230807233631-2.png]]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0