Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 99.3
edited by Xiaoling
on 2023/08/11 11:48
Change comment: There is no comment for this version
To version 53.21
edited by Xiaoling
on 2023/08/02 14:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,10 @@
1 -(% class="wikigeneratedid" id="HTableofContents:" %)
1 +(% class="wikigeneratedid" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
5 5  
6 6  
7 +
7 7  = 1. The use of this guideline =
8 8  
9 9  
... ... @@ -10,30 +10,17 @@
10 10  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
11 11  
12 12  
13 -= 2. Attach Network =
14 += 2. Network Connection =
14 14  
15 15  
16 -To attache NB-IoT sensors to NB-IoT Network, You need to:
17 -
18 -1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 -1. Insert the SIM card to Sensor
20 -1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
21 -
22 -[[image:image-20230808205045-1.png||height="293" width="438"]]
23 -
24 -After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25 -
26 26  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
27 27  
28 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
29 -|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
30 -|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
31 -**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
19 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 +|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 +|1NCE| | |
22 +|China Mobile| | |
32 32  
33 -Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
34 -)))|(% style="width:135px" %)
35 -|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
36 -|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
24 +== 2.1 1NCE SIM Card. ==
37 37  
38 38  
39 39  
... ... @@ -117,9 +117,9 @@
117 117  [[image:image-20230802112413-7.png]]
118 118  
119 119  
120 -=== 3.3.2 Simulate with MQTT.fx ===
108 +== 3.3.2 Simulate with MQTT.fx ==
121 121  
122 -==== 3.3.2.1 Establish MQTT Connection ====
110 +=== 3.3.2.1 Establish MQTT Connection ===
123 123  
124 124  
125 125  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -137,15 +137,12 @@
137 137  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
138 138  
139 139  
128 +=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
140 140  
141 -==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
142 -
143 -
144 144  [[image:image-20230802112413-9.png]]
145 145  
146 146  [[image:image-20230802112413-10.png]]
147 147  
148 -
149 149  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
150 150  
151 151  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
... ... @@ -160,30 +160,29 @@
160 160  [[image:image-20230802112413-11.png]]
161 161  
162 162  
163 -=== 3.3.3 Configure NB-IoT Sensor for connection ===
148 +== 3.3 Configure NB-IoT Sensor for connection ==
164 164  
165 -==== 3.3.3.1 AT Commands: ====
150 +=== 3.3.1 AT Commands: ===
166 166  
167 167  
168 168  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
169 169  
170 -* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
155 +* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
171 171  
172 -* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
157 +* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
173 173  
174 -* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
159 +* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
175 175  
176 -* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
161 +* **AT+PWD=<Your ThingSpeak MQTT Password>**
177 177  
178 -* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
163 +* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
179 179  
180 -* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
165 +* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
181 181  
182 182  
168 +=== 3.3.2 Uplink Examples ===
183 183  
184 -==== 3.3.3.2 Uplink Examples ====
185 185  
186 -
187 187  For S31-NB
188 188  
189 189  For SE01-NB
... ... @@ -209,7 +209,7 @@
209 209  For SN50V3-NB
210 210  
211 211  
212 -==== 3.3.3.3 Map fields to sensor value ====
196 +=== 3.3.3 Map fields to sensor value ===
213 213  
214 214  
215 215  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
... ... @@ -222,313 +222,333 @@
222 222  
223 223  Below is the NB-IoT Product Table show the mapping.
224 224  
225 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
226 -|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
227 -|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
228 -|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
229 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
230 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 -|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
234 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 -|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
237 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
238 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
239 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
240 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
241 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
242 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
243 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
209 +(% border="1" cellspacing="4" style="width:1386px;background-color:#F2F2F2" %)
210 +|(% style="width:124px;background-color:#4F81BD" %) |(% style="width:91px;background-color:#4F81BD;color:white" %)Field1|(% style="width:102px;background-color:#4F81BD;color:white" %)Field2|(% style="width:159px;background-color:#4F81BD;color:white" %)Field3|(% style="width:153px;background-color:#4F81BD;color:white" %)Field4|(% style="width:152px;background-color:#4F81BD;color:white" %)Field5|(% style="width:148px;background-color:#4F81BD;color:white" %)Field6|(% style="width:164px;background-color:#4F81BD;color:white" %)Field7|(% style="width:152px;background-color:#4F81BD;color:white" %)Field8|(% style="width:66px;background-color:#4F81BD;color:white" %)Field9|(% style="width:66px;background-color:#4F81BD;color:white" %)Field10
211 +|(% style="width:124px;background-color:#4F81BD;color:white" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
212 +|(% style="width:124px;background-color:#4F81BD;color:white" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
213 +|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
214 +|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
215 +|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
216 +|(% style="width:124px;background-color:#4F81BD;color:white" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
217 +|(% rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
218 +|(% style="width:124px;background-color:#4F81BD;color:white" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
219 +|(% style="width:124px;background-color:#4F81BD;color:white" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
220 +|(% style="width:124px;background-color:#4F81BD;color:white" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 +|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
222 +|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)SN50V3-NB|(% colspan="1" rowspan="1" style="width:91px" %) |(% colspan="1" rowspan="1" style="width:102px" %) |(% colspan="1" rowspan="1" style="width:159px" %) |(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
223 +|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
224 +|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
225 +|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
226 +|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
227 +|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
228 +|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
244 244  
245 245  
246 246  
247 247  == 3.4 Datacake ==
248 248  
249 -=== 3.4.1 Create device ===
234 +== 3.4.1 Define Product ==
250 250  
251 251  
252 -[[image:image-20230808162301-1.png]]
237 +Firstly, we need to set the MQTT mode to datacake, and we need to run** AT+PRO=3,2**. This command is set to datacake. After running the command, the device automatically sets the server address, port.
253 253  
254 254  
255 -[[image:image-20230808162342-2.png]]
240 +By chosing to add the device under a (% style="color:blue" %)**"New Product"**(%%) you are required to give a name for this product. You can name it something like "My First MQTT Product".
256 256  
242 +[[image:image-20230802112413-14.png]]
257 257  
258 -[[image:image-20230808162421-3.png]]
259 259  
245 +=== 3.4.2 Create Device ===
260 260  
261 -The device ID needs to be filled in with IMEI, and a prefix of** 'f' **needs to be added.
262 262  
263 -[[image:image-20230808163612-7.png]]
248 +In the second step you have to define the device which should be added to the product.
264 264  
265 -[[image:image-20230808163035-5.png]]
250 +[[image:image-20230802112413-15.png]]
266 266  
267 -[[image:image-20230808163049-6.png]]
252 +Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
268 268  
269 269  
270 -=== 3.4.2 Scan QR code to obtain data ===
255 +=== 3.4.3 Create Database Fields ===
271 271  
272 272  
273 -Users can use their phones or computers to scan QR codes to obtain device data information.
258 +After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
274 274  
275 -[[image:image-20230808170051-8.png]]
260 +You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
276 276  
277 -[[image:image-20230808170548-9.png]]
262 +[[image:image-20230802112413-16.png]]
278 278  
264 +[[image:image-20230802112413-17.png]]
279 279  
280 -=== 3.4.2 AT command for connecting to DataCake ===
266 +To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
281 281  
268 +This will open another modal asking for some required input for your first field.
282 282  
283 -(% style="color:blue" %)**AT+PRO=2,0**
270 +[[image:image-20230802112413-18.png]]
284 284  
285 -(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
272 +[[image:image-20230802112413-19.png]]
286 286  
287 287  
288 -== 3.5 Node-Red (via MQTT) ==
275 +=== 3.4.4 Set up Broker ===
289 289  
290 -=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
291 291  
278 +The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
292 292  
293 -Take S31-NB UDP protocol as an example.
280 +You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
294 294  
295 -Dragino provides input flow examples for the sensors.
282 +View your Personal Access Token
296 296  
297 -User can download the required JSON file through Dragino Node-RED input flow template.
284 +You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
298 298  
299 -Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
286 +[[image:image-20230802112413-20.png]]
300 300  
301 -We can directly import the template.
288 +(% style="color:blue" %)**MQTT Client-ID**
302 302  
303 -The templates for S31-NB and NB95S31B are the same.
290 +The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
304 304  
292 +(% style="color:blue" %)**AT+CLIENT=“Any value”**
305 305  
306 -[[image:image-20230809173127-4.png]]
294 +(% style="color:blue" %)**AT+UNAME=Token**
307 307  
296 +(% style="color:blue" %)**AT+PWD=Token**
308 308  
309 -Please select the NB95S31B template.
298 +[[image:image-20230802112413-21.png]]
310 310  
311 -[[image:image-20230809173310-5.png]]
312 312  
313 -[[image:image-20230809173438-6.png]]
301 +=== 3.4.5 Create your first Subscription ===
314 314  
315 -[[image:image-20230809173800-7.png]]
316 316  
304 +(% style="color:blue" %)**Subscribe**
317 317  
318 -Successfully imported template.
306 +Data is published according to the following structure:
319 319  
320 -[[image:image-20230809173835-8.png]]
308 +dtck~/~//
321 321  
310 +Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
322 322  
323 -Users can set UDP port.
324 324  
325 -[[image:image-20230809174053-9.png]]
313 +[[image:image-20230802112413-22.png]]
326 326  
327 327  
328 -=== 3.5.2 Simulate Connection ===
316 +[[image:image-20230802112413-23.png]]
329 329  
330 330  
331 -We have completed the configuration of UDP. We can try sending packets to node red.
319 +[[image:image-20230802112413-24.png]]
332 332  
333 -[[image:image-20230810083934-1.png]]
334 334  
335 -[[image:image-20230810084048-2.png]]
322 +(% style="color:blue" %)**example:**
336 336  
337 -=== 3.5.3 Configure NB-IoT Sensors ===
324 +AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
338 338  
326 +[[image:image-20230802112413-25.png]]
339 339  
340 -* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
341 341  
342 -* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
329 +=== 3.4.6 Define Publish Topic ===
343 343  
344 344  
332 +(% style="color:blue" %)**Publish**
345 345  
346 -== 3.6 ThingsBoard.Cloud (via MQTT) ==
334 +To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
347 347  
348 -=== 3.6.1 Configure ThingsBoard ===
336 +Due to the nature of MQTT, the topic prefix differs as follows:
349 349  
350 -==== 3.6.1.1 Create Device ====
338 +dtck-pub~/~//
351 351  
340 +(% style="color:blue" %)**example:**
352 352  
353 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
342 +AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
354 354  
355 -[[image:image-20230802112413-32.png]]
356 356  
345 +=== 3.4.7 upload data ===
357 357  
358 -==== 3.6.1.2 Create Uplink & Downlink Converter ====
359 359  
348 +[[image:image-20230802112413-26.png]]
360 360  
361 -(% style="color:blue" %)**Uplink Converter**
350 +[[image:image-20230802112413-27.png]]
362 362  
363 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
352 +[[image:image-20230802112413-28.png]]
364 364  
365 -To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
366 366  
367 -[[image:image-20230802112413-33.png||height="732" width="1302"]]
355 +== 3.5 Node-Red (via MQTT) ==
368 368  
357 +=== 3.5.1 Configure Node-Red ===
369 369  
370 -(% style="color:blue" %)**Downlink Converter**
359 +[[image:image-20230802112413-29.png]]
371 371  
372 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
361 +[[image:image-20230802112413-30.png]]
373 373  
374 -[[image:image-20230802112413-34.png||height="734" width="1305"]]
363 +=== 3.5.2 Simulate Connection ===
375 375  
376 -(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
377 377  
366 +[[image:image-20230802112413-31.png]]
378 378  
379 -==== 3.6.1.3 MQTT Integration Setup ====
380 380  
369 +=== 3.5.3 Configure NB-IoT Sensors ===
381 381  
382 -Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
383 383  
384 -[[image:image-20230802112413-35.png||height="738" width="1312"]]
372 +* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/Set to mqtt Server and  Payload
385 385  
374 +* (% style="color:blue" %)**AT+CLIENT=any value**(%%)
386 386  
387 -* The next steps is to add the recently created uplink and downlink converters;
376 +* (% style="color:blue" %)**AT+UNAME=any value**(%%)
388 388  
389 -[[image:image-20230802112413-36.png||height="736" width="1308"]]
378 +* (% style="color:blue" %)**AT+PWD=any value**(%%)
390 390  
391 -[[image:image-20230802112413-37.png||height="735" width="1307"]]
380 +* (% style="color:blue" %)**AT+PUBTOPIC=any value**(%%)
392 392  
382 +* (% style="color:blue" %)**AT+SUBTOPIC=any value**(%%)
393 393  
394 -(% style="color:blue" %)**Add a topic filter:**
395 395  
396 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
385 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
397 397  
398 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
387 +=== 3.6.1 Configure ThingsBoard ===
399 399  
400 -[[image:image-20230802112413-38.png||height="731" width="1300"]]
389 +=== 1.1.1 Create Device ===
401 401  
391 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
402 402  
403 -=== 3.6.2 Simulate with MQTT.fx ===
393 +[[image:image-20230802112413-32.png]]
404 404  
395 +=== 1.1.2 Create Uplink & Downlink Converter ===
405 405  
406 -[[image:image-20230802112413-39.png]]
397 +Uplink Converter
407 407  
408 -[[image:image-20230802112413-40.png]]
399 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
409 409  
401 +To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
410 410  
411 -=== 3.6.3 Configure NB-IoT Sensor ===
403 +[[image:image-20230802112413-33.png]]
412 412  
413 413  
414 -(% style="color:blue" %)**AT Commands**
406 +Downlink Converter
415 415  
416 -* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
408 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
417 417  
418 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
410 +[[image:image-20230802112413-34.png]]
419 419  
420 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
412 +Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
421 421  
422 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
414 +=== 1.1.3 MQTT Integration Setup ===
423 423  
424 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
416 +Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
425 425  
426 -* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
418 +[[image:image-20230802112413-35.png]]
427 427  
428 -Test Uplink by click the button for 1 second
420 +* The next steps is to add the recently created uplink and downlink converters;
429 429  
430 -[[image:image-20230802112413-41.png]]
422 +[[image:image-20230802112413-36.png]]
431 431  
432 -[[image:image-20230802112413-42.png]]
424 +[[image:image-20230802112413-37.png]]
433 433  
434 -[[image:image-20230802112413-43.png]]
426 +Add a topic filter:
435 435  
436 436  
437 -== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
429 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
438 438  
439 -=== 3.7.1 Create device & Get Credentials ===
431 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
440 440  
433 +[[image:image-20230802112413-38.png]]
441 441  
442 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
435 +== 1.2 Simulate with MQTT.fx ==
443 443  
444 -[[image:image-20230802112413-44.png]]
437 +[[image:image-20230802112413-39.png]]
445 445  
446 -[[image:image-20230802112413-45.png]]
439 +[[image:image-20230802112413-40.png]]
447 447  
441 +== 1.3 Configure NB-IoT Sensor ==
448 448  
449 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
443 +AT Commands
450 450  
451 -[[image:image-20230802112413-46.png]]
445 +AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
452 452  
447 +AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
453 453  
454 -The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
449 +AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
455 455  
456 -(% style="color:blue" %)**On the Connection Profile window, set the following information:**
457 457  
458 -* (% style="color:#037691" %)**Profile Name: “Any name”**
452 +Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
459 459  
460 -* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
454 +CLIENT :“Any value”
461 461  
462 -* (% style="color:#037691" %)**Broker Port: 8883**
456 +User Name:“Any value”
463 463  
464 -* (% style="color:#037691" %)**Client ID: “Any value”**
458 +Password:“Any value”
465 465  
466 -(% style="color:blue" %)**On the section User credentials, set the following information:**
467 467  
468 -* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
461 +Test Uplink by click the button for 1 second
469 469  
470 -* (% style="color:#037691" %)**Password: “Your device token”**
463 +[[image:image-20230802112413-41.png]]
471 471  
472 -* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
465 +[[image:image-20230802112413-42.png]]
473 473  
474 -* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
467 +[[image:image-20230802112413-43.png]]
475 475  
476 -(% style="color:blue" %)**AT command:**
477 477  
478 -* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
470 += 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
479 479  
480 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
472 +== 5.1 Create device & Get Credentials ==
481 481  
482 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
474 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
483 483  
484 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
476 +[[image:image-20230802112413-44.png]]
485 485  
486 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
478 +[[image:image-20230802112413-45.png]]
487 487  
488 -* (% style="color:#037691" %)**AT+PWD=“Your device token”**
480 += =
489 489  
482 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
490 490  
484 +[[image:image-20230802112413-46.png]]
491 491  
492 -=== 3.7.2 Simulate with MQTT.fx ===
493 493  
487 +On the Connection Profile window, set the following information: (这边加一个截图)
494 494  
495 -[[image:image-20230802112413-52.png]]
489 +* Profile Name: “Any name”
490 +* Broker Address: mqtt.tago.io
491 +* Broker Port: 1883
492 +* Client ID: “Any value”
496 496  
494 +On the section User credentials, set the following information:(这边加一个截图)
497 497  
498 -[[image:image-20230808105300-2.png]]
496 +* User Name: “Any value” Tago validates your user by the token only
497 +* Password: “Your device token”
498 +* PUBTOPIC: “Any value”
499 +* SUBTOPIC: “Any value”
499 499  
501 +== 5.2 Simulate with MQTT.fx ==
500 500  
501 -Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
503 +[[image:image-20230802112413-47.png]]
502 502  
503 -[[image:image-20230808105217-1.png]]
505 +[[image:image-20230802112413-48.png]]
504 504  
505 -[[image:image-20230808105329-3.png]]
507 +Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
506 506  
509 +[[image:image-20230802112413-49.png]]
507 507  
508 -=== 3.7.3 tago data ===
511 +== 1.4. tago data ==
509 509  
510 510  
511 511  [[image:image-20230802112413-50.png]]
512 512  
513 -[[image:image-20230802112413-51.png||height="184" width="696"]]
516 +[[image:image-20230802112413-51.png]]
514 514  
518 +== 1.4. TLS mode ==
515 515  
516 -== 3.8 TCP Connection ==
520 +Users can choose to use SSL/TLS mode.
517 517  
522 +On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
518 518  
519 -(% style="color:blue" %)**AT command:**
524 +The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
520 520  
521 -* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
526 +* Profile Name: “Any name”
527 +* Broker Address: mqtt.tago.io
528 +* Broker Port: 8883
529 +* Client ID: “Any value”
530 +* User Name: “Any value” Tago validates your user by the token only
531 +* Password: “Your device token”
532 +* PUBTOPIC: “Any value”
533 +* SUBTOPIC: “Any value”
522 522  
523 -* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
535 +[[image:image-20230802112413-52.png]]
524 524  
525 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
526 526  
527 -(% style="color:blue" %)**Sensor Console Output when Uplink:**
528 -
529 -[[image:image-20230807233631-1.png]]
530 -
531 -
532 -(% style="color:blue" %)**See result in TCP Server:**
533 -
534 -[[image:image-20230807233631-2.png]]
538 +
image-20230807233631-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content