Last modified by Mengting Qiu on 2025/03/08 11:33
<
From version < 70.1 >
edited by David Huang
on 2023/08/08 11:09
To version < 53.9 >
edited by Xiaoling
on 2023/08/02 11:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.David
1 +XWiki.Xiaoling
Content
... ... @@ -1,8 +1,10 @@
1 -== **Table of Contents:** ==
1 +(% class="wikigeneratedid" %)
2 +**Table of Contents:**
2 2  
3 3  {{toc/}}
4 4  
5 5  
7 +
6 6  = 1. The use of this guideline =
7 7  
8 8  
... ... @@ -9,31 +9,20 @@
9 9  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
10 10  
11 11  
12 -= 2. Attach Network =
14 += 2. Network Connection =
13 13  
14 14  
15 -To attache NB-IoT sensors to NB-IoT Network, You need to:
17 +The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
16 16  
17 -1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
18 -1. Insert the SIM card to Sensor
19 -1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
19 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 +|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 +|1NCE| | |
22 +|China Mobile| | |
20 20  
21 -(% class="mark" %)插入 SIM 卡图片
24 +== 2.1 1NCE SIM Card. ==
22 22  
23 -After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
24 24  
25 -The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
26 26  
27 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
28 -|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
29 -|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
30 -**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
31 -
32 -Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
33 -)))|(% style="width:135px" %)
34 -|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
35 -|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
36 -
37 37  = 3. Configure to connect to different servers =
38 38  
39 39  == 3.1 General UDP Connection ==
... ... @@ -114,9 +114,9 @@
114 114  [[image:image-20230802112413-7.png]]
115 115  
116 116  
117 -=== 3.3.2 Simulate with MQTT.fx ===
108 +== 3.3.2 Simulate with MQTT.fx ==
118 118  
119 -==== 3.3.2.1 Establish MQTT Connection ====
110 +=== 3.3.2.1 Establish MQTT Connection ===
120 120  
121 121  
122 122  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -126,57 +126,49 @@
126 126  * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
127 127  
128 128  * (% style="color:#037691" %)**Broker Port:**(%%) 1883
129 -
130 130  * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
131 -
132 132  * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
133 -
134 134  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
135 135  
136 -==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
124 +=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
137 137  
138 -
139 139  [[image:image-20230802112413-9.png]]
140 140  
141 141  [[image:image-20230802112413-10.png]]
142 142  
130 +In MQTT.fx, we can publish below info:
143 143  
144 -(% style="color:blue" %)**In MQTT.fx, we can publish below info:**
132 +* Topic: channels/YOUR_CHANNEL_ID/publish
133 +* Payload: field1=63&field2=67&status=MQTTPUBLISH
145 145  
146 -* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
147 -
148 -* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
149 -
150 150  Where 63 and 67 are the value to be published to field1 & field2.
151 151  
152 152  
153 -(% style="color:blue" %)**Result: **
138 +Result:
154 154  
155 155  [[image:image-20230802112413-11.png]]
156 156  
157 157  
158 -=== 3.3.3 Configure NB-IoT Sensor for connection ===
143 +== 1.3 Configure NB-IoT Sensor for connection ==
159 159  
160 -==== 3.3.3.1 AT Commands: ====
145 +=== 1.3.1 AT Commands: ===
161 161  
162 -
163 163  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
164 164  
165 -* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
149 +* AT+PRO=3,1   ~/~/Set to use ThingSpeak Server and Related Payload
166 166  
167 -* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
151 +* AT+CLIENT=<Your ThingSpeak MQTT ClientID>
168 168  
169 -* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
153 +* AT+UNAME=<Your ThingSpeak MQTT User Name>
170 170  
171 -* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
155 +* AT+PWD=<Your ThingSpeak MQTT Password>
172 172  
173 -* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
157 +* AT+PUBTOPIC=<YOUR_CHANNEL_ID>
174 174  
175 -* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
159 +* AT+SUBTOPIC=<YOUR_CHANNEL_ID>
176 176  
177 -==== 3.3.3.2 Uplink Examples ====
161 +=== 1.3.2 Uplink Examples ===
178 178  
179 -
180 180  For S31-NB
181 181  
182 182  For SE01-NB
... ... @@ -202,9 +202,8 @@
202 202  For SN50V3-NB
203 203  
204 204  
205 -==== 3.3.3.3 Map fields to sensor value ====
188 +=== 1.3.2 Map fields to sensor value ===
206 206  
207 -
208 208  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
209 209  
210 210  
... ... @@ -215,238 +215,388 @@
215 215  
216 216  Below is the NB-IoT Product Table show the mapping.
217 217  
218 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1386px" %)
219 -|(% style="background-color:#4f81bd; width:124px" %) |(% style="background-color:#4f81bd; color:white; width:91px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:159px" %)Field3|(% style="background-color:#4f81bd; color:white; width:153px" %)Field4|(% style="background-color:#4f81bd; color:white; width:152px" %)Field5|(% style="background-color:#4f81bd; color:white; width:148px" %)Field6|(% style="background-color:#4f81bd; color:white; width:164px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:66px" %)Field9|(% style="background-color:#4f81bd; color:white; width:66px" %)Field10
220 -|(% style="background-color:#4f81bd; color:white; width:124px" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 -|(% style="background-color:#4f81bd; color:white; width:124px" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
222 -|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
223 -|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
224 -|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
225 -|(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
226 -|(% rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
227 -|(% style="background-color:#4f81bd; color:white; width:124px" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
228 -|(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
229 -|(% style="background-color:#4f81bd; color:white; width:124px" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
230 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
231 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
232 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
233 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
234 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
235 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
236 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
200 +|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
201 +Field9
237 237  
238 -== 3.4 Datacake ==
203 +
204 +)))|(% colspan="1" rowspan="1" %)(((
205 +Field10
239 239  
207 +
208 +)))
209 +|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
210 +|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
211 +|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
212 +Battery
240 240  
214 +
215 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
216 +|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
217 +Battery
241 241  
219 +
220 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 +|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
222 +Battery
242 242  
243 -== 3.5 Node-Red (via MQTT) ==
224 +
225 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
226 +|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
227 +Battery
244 244  
245 -=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
229 +
230 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
231 +|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 +|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
233 +|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
234 +|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
235 +|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
236 +|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 +|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
238 +|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
239 +DS18B20 Temp
246 246  
241 +
242 +)))|(% colspan="1" rowspan="1" %)(((
243 +exit_state/input PA4
247 247  
248 -[[image:image-20230802112413-29.png]]
245 +
246 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
247 +|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
248 +Battery
249 249  
250 +
251 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
252 +exit_state/input PA4
250 250  
251 -[[image:image-20230802112413-30.png]]
254 +
255 +)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
256 +|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
257 +Battery
252 252  
259 +
260 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
261 +DS18B20 Temp
253 253  
254 -=== 3.5.2 Simulate Connection ===
263 +
264 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
265 +exit_state/input PA4
255 255  
267 +
268 +)))|(% colspan="1" rowspan="1" %)(((
269 +DS18B20 Temp2
256 256  
257 -[[image:image-20230802112413-31.png]]
271 +
272 +)))|(% colspan="1" rowspan="1" %)(((
273 +DS18B20 Temp3
258 258  
275 +
276 +)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
277 +|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
278 +Battery
259 259  
260 -=== 3.5.3 Configure NB-IoT Sensors ===
280 +
281 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
282 +DS18B20 Temp
261 261  
284 +
285 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
286 +exit_state/input PA4
262 262  
263 -* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/  Set to mqtt Server and  Payload
288 +
289 +)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
290 +|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
291 +Battery
264 264  
265 -* (% style="color:blue" %)**AT+CLIENT=any value**
293 +
294 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
266 266  
267 -* (% style="color:blue" %)**AT+UNAME=any value**
296 += 4. Datacake =
268 268  
269 -* (% style="color:blue" %)**AT+PWD=any value**
298 +== 1.1 Define Product ==
270 270  
271 -* (% style="color:blue" %)**AT+PUBTOPIC=any value**
300 +Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
272 272  
273 -* (% style="color:blue" %)**AT+SUBTOPIC=any value**
274 274  
275 -== 3.6 ThingsBoard.Cloud (via MQTT) ==
303 +By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
276 276  
277 -=== 3.6.1 Configure ThingsBoard ===
305 +[[image:image-20230802112413-14.png]]
278 278  
279 -==== 3.6.1.1 Create Device ====
307 +== 1.2 Create Device ==
280 280  
309 +In the second step you have to define the device which should be added to the product.
281 281  
282 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
311 +[[image:image-20230802112413-15.png]]
283 283  
284 -[[image:image-20230802112413-32.png]]
313 +Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
285 285  
286 286  
287 -==== 3.6.1.2 Create Uplink & Downlink Converter ====
316 +== 1.3 Create Database Fields ==
288 288  
318 +After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
289 289  
290 -(% style="color:blue" %)**Uplink Converter**
320 +You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
291 291  
292 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
322 +[[image:image-20230802112413-16.png]]
293 293  
294 -To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
324 +[[image:image-20230802112413-17.png]]
295 295  
296 -[[image:image-20230802112413-33.png||height="732" width="1302"]]
326 +To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
297 297  
328 +This will open another modal asking for some required input for your first field.
298 298  
299 -(% style="color:blue" %)**Downlink Converter**
330 +[[image:image-20230802112413-18.png]]
300 300  
301 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
332 +[[image:image-20230802112413-19.png]]
302 302  
303 -[[image:image-20230802112413-34.png||height="734" width="1305"]]
334 +== 1.4 Set up Broker ==
304 304  
305 -(% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
336 +The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
306 306  
338 +You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
307 307  
308 -==== 3.6.1.3 MQTT Integration Setup ====
340 +View your Personal Access Token
309 309  
342 +You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
310 310  
311 -Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
344 +[[image:image-20230802112413-20.png]]
312 312  
313 -[[image:image-20230802112413-35.png||height="738" width="1312"]]
346 +MQTT Client-ID
314 314  
348 +The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
315 315  
316 -* The next steps is to add the recently created uplink and downlink converters;
350 +AT+CLIENT=“Any value”
317 317  
318 -[[image:image-20230802112413-36.png||height="736" width="1308"]]
352 +AT+UNAME=Token
319 319  
320 -[[image:image-20230802112413-37.png||height="735" width="1307"]]
354 +AT+PWD=Token
321 321  
356 +[[image:image-20230802112413-21.png]]
322 322  
323 -(% style="color:blue" %)**Add a topic filter:**
324 324  
325 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
359 +== 1.6 Create your first Subscription ==
326 326  
327 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
361 +Subscribe
328 328  
329 -[[image:image-20230802112413-38.png||height="731" width="1300"]]
363 +Data is published according to the following structure:
330 330  
365 +dtck~/~//
331 331  
332 -=== 3.6.2 Simulate with MQTT.fx ===
367 +Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
333 333  
334 334  
335 -[[image:image-20230802112413-39.png]]
370 +[[image:image-20230802112413-22.png]]
336 336  
337 -[[image:image-20230802112413-40.png]]
338 338  
373 +[[image:image-20230802112413-23.png]]
339 339  
340 -=== 3.6.3 Configure NB-IoT Sensor ===
341 341  
376 +[[image:image-20230802112413-24.png]]
342 342  
343 -(% style="color:blue" %)**AT Commands**
344 344  
345 -* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
379 +example:
346 346  
347 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>** (%%)
348 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
349 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
350 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
351 -* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
381 +AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
352 352  
353 -Test Uplink by click the button for 1 second
383 +[[image:image-20230802112413-25.png]]
354 354  
355 -[[image:image-20230802112413-41.png]]
385 +== 1.7 Define Publish Topic ==
356 356  
357 -[[image:image-20230802112413-42.png]]
387 +Publish
358 358  
359 -[[image:image-20230802112413-43.png]]
389 +To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
360 360  
391 +Due to the nature of MQTT, the topic prefix differs as follows:
361 361  
362 -== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
393 +dtck-pub~/~//
363 363  
364 -=== 3.7.1 Create device & Get Credentials ===
395 +example:
365 365  
397 +AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
366 366  
367 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
399 +== 1.8 upload data ==
368 368  
369 -[[image:image-20230802112413-44.png]]
401 +[[image:image-20230802112413-26.png]]
370 370  
371 -[[image:image-20230802112413-45.png]]
403 +[[image:image-20230802112413-27.png]]
372 372  
405 +[[image:image-20230802112413-28.png]]
373 373  
374 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
407 += =
375 375  
376 -[[image:image-20230802112413-46.png]]
409 += 5. Node-Red (via MQTT) =
377 377  
378 378  
379 -The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
412 +== 1.1 Configure Node-Red ==
380 380  
381 -On the Connection Profile window, set the following information:
414 +[[image:image-20230802112413-29.png]]
382 382  
383 -* (% style="color:blue" %)**Profile Name: “Any name”**
416 +[[image:image-20230802112413-30.png]]
384 384  
385 -* (% style="color:blue" %)**Broker Address: mqtt.tago.io**
418 +== 1.2 Simulate Connection ==
386 386  
387 -* (% style="color:blue" %)**Broker Port: 8883**
420 +[[image:image-20230802112413-31.png]]
388 388  
389 -* (% style="color:blue" %)**Client ID: “Any value”**
422 +== 1.3 Configure NB-IoT Sensors ==
390 390  
391 -On the section User credentials, set the following information:
424 +* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
425 +* AT+CLIENT=any value
426 +* AT+UNAME=any value
427 +* AT+PWD=any value
428 +* AT+PUBTOPIC=any value
429 +* AT+SUBTOPIC=any value
392 392  
393 -* (% style="color:blue" %)**User Name: “Any value”** (%%) ~/~/ Tago validates your user by the token only
431 += 6. ThingsBoard.Cloud (via MQTT) =
394 394  
395 -* (% style="color:blue" %)**Password: “Your device token”**
433 +== 1.1 Configure ThingsBoard ==
396 396  
397 -* (% style="color:blue" %)**PUBTOPIC: “Any value”**
435 +=== 1.1.1 Create Device ===
398 398  
399 -* (% style="color:blue" %)**SUBTOPIC: “Any value”**
437 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
400 400  
401 -(% style="color:blue" %)**AT command:**
439 +[[image:image-20230802112413-32.png]]
402 402  
403 -* **AT+PRO=3,0 or 3,5 **~/~/ hex format or json format
441 +=== 1.1.2 Create Uplink & Downlink Converter ===
404 404  
405 -* **AT+SUBTOPIC=<device name>** **or User Defined**
406 -* **AT+PUBTOPIC=<device name>or User Defined**
407 -* **AT+CLIENT=<device name> or User Defined**
408 -* **AT+UNAME=<device name> or User Defined**
409 -* **AT+PWD=“Your device token”**
443 +Uplink Converter
410 410  
411 -=== 3.7.2 Simulate with MQTT.fx ===
445 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
412 412  
413 -[[image:image-20230802112413-52.png]]
447 +To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
414 414  
449 +[[image:image-20230802112413-33.png]]
415 415  
416 -[[image:image-20230808105300-2.png]]
417 417  
418 -Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
452 +Downlink Converter
419 419  
420 -[[image:image-20230808105217-1.png]]
454 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
421 421  
422 -[[image:image-20230808105329-3.png]]
456 +[[image:image-20230802112413-34.png]]
423 423  
458 +Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
424 424  
425 -=== 3.7.3 tago data ===
460 +=== 1.1.3 MQTT Integration Setup ===
426 426  
462 +Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
427 427  
428 -[[image:image-20230802112413-50.png]]
464 +[[image:image-20230802112413-35.png]]
429 429  
430 -[[image:image-20230802112413-51.png||height="184" width="696"]]
466 +* The next steps is to add the recently created uplink and downlink converters;
431 431  
468 +[[image:image-20230802112413-36.png]]
432 432  
470 +[[image:image-20230802112413-37.png]]
433 433  
434 -== 3.8 TCP Connection ==
472 +Add a topic filter:
435 435  
436 436  
437 -* **AT+PRO=4,0   ** ~/~/ Set to use TCP protocol to uplink(HEX format)
438 -* **AT+PRO=4,1   ** ~/~/ Set to use TCP protocol to uplink(JSON format)
439 -* **AT+SERVADDR=120.24.4.116,5600   **~/~/ to set TCP server address and port
475 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
440 440  
441 -**Sensor Console Output when Uplink**
477 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
442 442  
443 -[[image:image-20230807233631-1.png]]
479 +[[image:image-20230802112413-38.png]]
444 444  
481 +== 1.2 Simulate with MQTT.fx ==
445 445  
446 -**See result in TCP Server**
483 +[[image:image-20230802112413-39.png]]
447 447  
448 -[[image:image-20230807233631-2.png]]
485 +[[image:image-20230802112413-40.png]]
449 449  
487 +== 1.3 Configure NB-IoT Sensor ==
450 450  
489 +AT Commands
451 451  
491 +AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
492 +
493 +AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
494 +
495 +AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
496 +
497 +
498 +Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
499 +
500 +CLIENT :“Any value”
501 +
502 +User Name:“Any value”
503 +
504 +Password:“Any value”
505 +
506 +
507 +Test Uplink by click the button for 1 second
508 +
509 +[[image:image-20230802112413-41.png]]
510 +
511 +[[image:image-20230802112413-42.png]]
512 +
513 +[[image:image-20230802112413-43.png]]
514 +
515 +
516 += 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
517 +
518 +== 5.1 Create device & Get Credentials ==
519 +
520 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
521 +
522 +[[image:image-20230802112413-44.png]]
523 +
524 +[[image:image-20230802112413-45.png]]
525 +
526 += =
527 +
528 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
529 +
530 +[[image:image-20230802112413-46.png]]
531 +
532 +
533 +On the Connection Profile window, set the following information: (这边加一个截图)
534 +
535 +* Profile Name: “Any name”
536 +* Broker Address: mqtt.tago.io
537 +* Broker Port: 1883
538 +* Client ID: “Any value”
539 +
540 +On the section User credentials, set the following information:(这边加一个截图)
541 +
542 +* User Name: “Any value” Tago validates your user by the token only
543 +* Password: “Your device token”
544 +* PUBTOPIC: “Any value”
545 +* SUBTOPIC: “Any value”
546 +
547 +== 5.2 Simulate with MQTT.fx ==
548 +
549 +[[image:image-20230802112413-47.png]]
550 +
551 +[[image:image-20230802112413-48.png]]
552 +
553 +Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
554 +
555 +[[image:image-20230802112413-49.png]]
556 +
557 +== 1.4. tago data ==
558 +
559 +
560 +[[image:image-20230802112413-50.png]]
561 +
562 +[[image:image-20230802112413-51.png]]
563 +
564 +== 1.4. TLS mode ==
565 +
566 +Users can choose to use SSL/TLS mode.
567 +
568 +On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
569 +
570 +The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
571 +
572 +* Profile Name: “Any name”
573 +* Broker Address: mqtt.tago.io
574 +* Broker Port: 8883
575 +* Client ID: “Any value”
576 +* User Name: “Any value” Tago validates your user by the token only
577 +* Password: “Your device token”
578 +* PUBTOPIC: “Any value”
579 +* SUBTOPIC: “Any value”
580 +
581 +[[image:image-20230802112413-52.png]]
582 +
583 +
452 452  
image-20230807233631-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0