Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 53.9
edited by Xiaoling
on 2023/08/02 11:57
Change comment: There is no comment for this version
To version 83.9
edited by Xiaoling
on 2023/08/09 10:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,9 @@
1 -(% class="wikigeneratedid" %)
1 +(% class="wikigeneratedid" id="HTableofContents:" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
5 5  
6 6  
7 -
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,17 +11,30 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
13 += 2. Attach Network =
15 15  
16 16  
16 +To attache NB-IoT sensors to NB-IoT Network, You need to:
17 +
18 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 +1. Insert the SIM card to Sensor
20 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
21 +
22 +[[image:image-20230808205045-1.png||height="293" width="438"]]
23 +
24 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25 +
17 17  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
28 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
29 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
30 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
31 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
23 23  
24 -== 2.1 1NCE SIM Card. ==
33 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
34 +)))|(% style="width:135px" %)
35 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
36 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
25 25  
26 26  
27 27  
... ... @@ -105,9 +105,9 @@
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
120 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
122 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -117,49 +117,61 @@
117 117  * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
118 118  
119 119  * (% style="color:#037691" %)**Broker Port:**(%%) 1883
132 +
120 120  * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
134 +
121 121  * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
136 +
122 122  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
123 123  
124 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
125 125  
140 +
141 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
142 +
143 +
126 126  [[image:image-20230802112413-9.png]]
127 127  
128 128  [[image:image-20230802112413-10.png]]
129 129  
130 -In MQTT.fx, we can publish below info:
131 131  
132 -* Topic: channels/YOUR_CHANNEL_ID/publish
133 -* Payload: field1=63&field2=67&status=MQTTPUBLISH
149 +(% style="color:blue" %)**In MQTT.fx, we can publish below info:**
134 134  
151 +* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
152 +
153 +* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
154 +
135 135  Where 63 and 67 are the value to be published to field1 & field2.
136 136  
137 137  
138 -Result:
158 +(% style="color:blue" %)**Result: **
139 139  
140 140  [[image:image-20230802112413-11.png]]
141 141  
142 142  
143 -== 1.3 Configure NB-IoT Sensor for connection ==
163 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
144 144  
145 -=== 1.3.1 AT Commands: ===
165 +==== 3.3.3.1 AT Commands: ====
146 146  
167 +
147 147  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
148 148  
149 -* AT+PRO=3,1   ~/~/Set to use ThingSpeak Server and Related Payload
170 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) **~/~/ Set to use ThingSpeak Server and Related Payload**
150 150  
151 -* AT+CLIENT=<Your ThingSpeak MQTT ClientID>
172 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
152 152  
153 -* AT+UNAME=<Your ThingSpeak MQTT User Name>
174 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
154 154  
155 -* AT+PWD=<Your ThingSpeak MQTT Password>
176 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
156 156  
157 -* AT+PUBTOPIC=<YOUR_CHANNEL_ID>
178 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
158 158  
159 -* AT+SUBTOPIC=<YOUR_CHANNEL_ID>
180 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
160 160  
161 -=== 1.3.2 Uplink Examples ===
162 162  
183 +
184 +==== 3.3.3.2 Uplink Examples ====
185 +
186 +
163 163  For S31-NB
164 164  
165 165  For SE01-NB
... ... @@ -185,8 +185,9 @@
185 185  For SN50V3-NB
186 186  
187 187  
188 -=== 1.3.2 Map fields to sensor value ===
212 +==== 3.3.3.3 Map fields to sensor value ====
189 189  
214 +
190 190  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
191 191  
192 192  
... ... @@ -197,388 +197,299 @@
197 197  
198 198  Below is the NB-IoT Product Table show the mapping.
199 199  
200 -|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
201 -Field9
225 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
226 +|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
227 +|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
228 +|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
229 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
230 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
234 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 +|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
237 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
238 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
239 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
240 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
241 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
242 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
243 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
202 202  
203 -
204 -)))|(% colspan="1" rowspan="1" %)(((
205 -Field10
206 206  
207 -
208 -)))
209 -|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
210 -|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
211 -|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
212 -Battery
213 213  
214 -
215 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
216 -|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
217 -Battery
247 +== 3.4 Datacake ==
218 218  
219 -
220 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 -|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
222 -Battery
249 +=== 3.4.1 Create device ===
223 223  
224 -
225 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
226 -|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
227 -Battery
228 228  
229 -
230 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
231 -|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 -|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
233 -|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
234 -|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
235 -|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
236 -|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 -|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
238 -|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
239 -DS18B20 Temp
252 +[[image:image-20230808162301-1.png]]
240 240  
241 -
242 -)))|(% colspan="1" rowspan="1" %)(((
243 -exit_state/input PA4
244 244  
245 -
246 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
247 -|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
248 -Battery
255 +[[image:image-20230808162342-2.png]]
249 249  
250 -
251 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
252 -exit_state/input PA4
253 253  
254 -
255 -)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
256 -|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
257 -Battery
258 +[[image:image-20230808162421-3.png]]
258 258  
259 -
260 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
261 -DS18B20 Temp
262 262  
263 -
264 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
265 -exit_state/input PA4
261 +The device ID needs to be filled in with IMEI, and a prefix of** 'f' **needs to be added.
266 266  
267 -
268 -)))|(% colspan="1" rowspan="1" %)(((
269 -DS18B20 Temp2
263 +[[image:image-20230808163612-7.png]]
270 270  
271 -
272 -)))|(% colspan="1" rowspan="1" %)(((
273 -DS18B20 Temp3
265 +[[image:image-20230808163035-5.png]]
274 274  
275 -
276 -)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
277 -|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
278 -Battery
267 +[[image:image-20230808163049-6.png]]
279 279  
280 -
281 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
282 -DS18B20 Temp
283 283  
284 -
285 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
286 -exit_state/input PA4
270 +=== 3.4.2 Scan QR code to obtain data ===
287 287  
288 -
289 -)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
290 -|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
291 -Battery
292 292  
293 -
294 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
273 +Users can use their phones or computers to scan QR codes to obtain device data information.
295 295  
296 -= 4. Datacake =
275 +[[image:image-20230808170051-8.png]]
297 297  
298 -== 1.1 Define Product ==
277 +[[image:image-20230808170548-9.png]]
299 299  
300 -Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
301 301  
280 +=== 3.4.2 AT command for connecting to DataCake ===
302 302  
303 -By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
304 304  
305 -[[image:image-20230802112413-14.png]]
283 +(% style="color:blue" %)**AT+PRO=2,0**
306 306  
307 -== 1.2 Create Device ==
285 +(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
308 308  
309 -In the second step you have to define the device which should be added to the product.
310 310  
311 -[[image:image-20230802112413-15.png]]
288 +== 3.5 Node-Red (via MQTT) ==
312 312  
313 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
290 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
314 314  
315 315  
316 -== 1.3 Create Database Fields ==
293 +[[image:image-20230802112413-29.png]]
317 317  
318 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
319 319  
320 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
296 +[[image:image-20230802112413-30.png]]
321 321  
322 -[[image:image-20230802112413-16.png]]
323 323  
324 -[[image:image-20230802112413-17.png]]
299 +=== 3.5.2 Simulate Connection ===
325 325  
326 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
327 327  
328 -This will open another modal asking for some required input for your first field.
302 +[[image:image-20230802112413-31.png]]
329 329  
330 -[[image:image-20230802112413-18.png]]
331 331  
332 -[[image:image-20230802112413-19.png]]
305 +=== 3.5.3 Configure NB-IoT Sensors ===
333 333  
334 -== 1.4 Set up Broker ==
335 335  
336 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
308 +* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    **~/~/  Set to mqtt Server and  Payload**
337 337  
338 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
310 +* (% style="color:blue" %)**AT+CLIENT=any value**
339 339  
340 -View your Personal Access Token
312 +* (% style="color:blue" %)**AT+UNAME=any value**
341 341  
342 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
314 +* (% style="color:blue" %)**AT+PWD=any value**
343 343  
344 -[[image:image-20230802112413-20.png]]
316 +* (% style="color:blue" %)**AT+PUBTOPIC=any value**
345 345  
346 -MQTT Client-ID
318 +* (% style="color:blue" %)**AT+SUBTOPIC=any value**
347 347  
348 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
349 349  
350 -AT+CLIENT=“Any value”
351 351  
352 -AT+UNAME=Token
322 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
353 353  
354 -AT+PWD=Token
324 +=== 3.6.1 Configure ThingsBoard ===
355 355  
356 -[[image:image-20230802112413-21.png]]
326 +==== 3.6.1.1 Create Device ====
357 357  
358 358  
359 -== 1.6 Create your first Subscription ==
329 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
360 360  
361 -Subscribe
331 +[[image:image-20230802112413-32.png]]
362 362  
363 -Data is published according to the following structure:
364 364  
365 -dtck~/~//
334 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
366 366  
367 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
368 368  
337 +(% style="color:blue" %)**Uplink Converter**
369 369  
370 -[[image:image-20230802112413-22.png]]
339 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
371 371  
341 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
372 372  
373 -[[image:image-20230802112413-23.png]]
343 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
374 374  
375 375  
376 -[[image:image-20230802112413-24.png]]
346 +(% style="color:blue" %)**Downlink Converter**
377 377  
348 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
378 378  
379 -example:
350 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
380 380  
381 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
352 +(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
382 382  
383 -[[image:image-20230802112413-25.png]]
384 384  
385 -== 1.7 Define Publish Topic ==
355 +==== 3.6.1.3 MQTT Integration Setup ====
386 386  
387 -Publish
388 388  
389 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
358 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
390 390  
391 -Due to the nature of MQTT, the topic prefix differs as follows:
360 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
392 392  
393 -dtck-pub~/~//
394 394  
395 -example:
363 +* The next steps is to add the recently created uplink and downlink converters;
396 396  
397 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
365 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
398 398  
399 -== 1.8 upload data ==
367 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
400 400  
401 -[[image:image-20230802112413-26.png]]
402 402  
403 -[[image:image-20230802112413-27.png]]
370 +(% style="color:blue" %)**Add a topic filter:**
404 404  
405 -[[image:image-20230802112413-28.png]]
372 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
406 406  
407 -= =
374 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
408 408  
409 -= 5. Node-Red (via MQTT) =
376 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
410 410  
411 411  
412 -== 1.1 Configure Node-Red ==
379 +=== 3.6.2 Simulate with MQTT.fx ===
413 413  
414 -[[image:image-20230802112413-29.png]]
415 415  
416 -[[image:image-20230802112413-30.png]]
382 +[[image:image-20230802112413-39.png]]
417 417  
418 -== 1.2 Simulate Connection ==
384 +[[image:image-20230802112413-40.png]]
419 419  
420 -[[image:image-20230802112413-31.png]]
421 421  
422 -== 1.3 Configure NB-IoT Sensors ==
387 +=== 3.6.3 Configure NB-IoT Sensor ===
423 423  
424 -* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
425 -* AT+CLIENT=any value
426 -* AT+UNAME=any value
427 -* AT+PWD=any value
428 -* AT+PUBTOPIC=any value
429 -* AT+SUBTOPIC=any value
430 430  
431 -= 6. ThingsBoard.Cloud (via MQTT) =
390 +(% style="color:blue" %)**AT Commands**
432 432  
433 -== 1.1 Configure ThingsBoard ==
392 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
434 434  
435 -=== 1.1.1 Create Device ===
394 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
436 436  
437 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
396 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
438 438  
439 -[[image:image-20230802112413-32.png]]
398 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
440 440  
441 -=== 1.1.2 Create Uplink & Downlink Converter ===
400 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
442 442  
443 -Uplink Converter
402 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
444 444  
445 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
446 446  
447 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
448 448  
449 -[[image:image-20230802112413-33.png]]
406 +Test Uplink by click the button for 1 second
450 450  
408 +[[image:image-20230802112413-41.png]]
451 451  
452 -Downlink Converter
410 +[[image:image-20230802112413-42.png]]
453 453  
454 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
412 +[[image:image-20230802112413-43.png]]
455 455  
456 -[[image:image-20230802112413-34.png]]
457 457  
458 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
415 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
459 459  
460 -=== 1.1.3 MQTT Integration Setup ===
417 +=== 3.7.1 Create device & Get Credentials ===
461 461  
462 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
463 463  
464 -[[image:image-20230802112413-35.png]]
420 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
465 465  
466 -* The next steps is to add the recently created uplink and downlink converters;
422 +[[image:image-20230802112413-44.png]]
467 467  
468 -[[image:image-20230802112413-36.png]]
424 +[[image:image-20230802112413-45.png]]
469 469  
470 -[[image:image-20230802112413-37.png]]
471 471  
472 -Add a topic filter:
427 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
473 473  
429 +[[image:image-20230802112413-46.png]]
474 474  
475 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
476 476  
477 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
432 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
478 478  
479 -[[image:image-20230802112413-38.png]]
434 +(% style="color:blue" %)**On the Connection Profile window, set the following information:**
480 480  
481 -== 1.2 Simulate with MQTT.fx ==
436 +* (% style="color:#037691" %)**Profile Name: “Any name”**
482 482  
483 -[[image:image-20230802112413-39.png]]
438 +* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
484 484  
485 -[[image:image-20230802112413-40.png]]
440 +* (% style="color:#037691" %)**Broker Port: 8883**
486 486  
487 -== 1.3 Configure NB-IoT Sensor ==
442 +* (% style="color:#037691" %)**Client ID: “Any value”**
488 488  
489 -AT Commands
490 490  
491 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
492 492  
493 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
446 +(% style="color:blue" %)**On the section User credentials, set the following information:**
494 494  
495 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
448 +* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
496 496  
450 +* (% style="color:#037691" %)**Password: “Your device token”**
497 497  
498 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
452 +* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
499 499  
500 -CLIENT :“Any value”
454 +* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
501 501  
502 -User Name:“Any value”
503 503  
504 -Password:“Any value”
505 505  
458 +(% style="color:blue" %)**AT command:**
506 506  
507 -Test Uplink by click the button for 1 second
460 +* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
508 508  
509 -[[image:image-20230802112413-41.png]]
462 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
510 510  
511 -[[image:image-20230802112413-42.png]]
464 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
512 512  
513 -[[image:image-20230802112413-43.png]]
466 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
514 514  
468 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
515 515  
516 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
470 +* (% style="color:#037691" %)**AT+PWD=“Your device token”**
517 517  
518 -== 5.1 Create device & Get Credentials ==
519 519  
520 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
521 521  
522 -[[image:image-20230802112413-44.png]]
474 +=== 3.7.2 Simulate with MQTT.fx ===
523 523  
524 -[[image:image-20230802112413-45.png]]
476 +[[image:image-20230802112413-52.png]]
525 525  
526 -= =
527 527  
528 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
479 +[[image:image-20230808105300-2.png]]
529 529  
530 -[[image:image-20230802112413-46.png]]
481 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
531 531  
483 +[[image:image-20230808105217-1.png]]
532 532  
533 -On the Connection Profile window, set the following information: (这边加一个截图)
485 +[[image:image-20230808105329-3.png]]
534 534  
535 -* Profile Name: “Any name”
536 -* Broker Address: mqtt.tago.io
537 -* Broker Port: 1883
538 -* Client ID: “Any value”
539 539  
540 -On the section User credentials, set the following information:(这边加一个截图)
488 +=== 3.7.3 tago data ===
541 541  
542 -* User Name: “Any value” Tago validates your user by the token only
543 -* Password: “Your device token”
544 -* PUBTOPIC: “Any value”
545 -* SUBTOPIC: “Any value”
546 546  
547 -== 5.2 Simulate with MQTT.fx ==
491 +[[image:image-20230802112413-50.png]]
548 548  
549 -[[image:image-20230802112413-47.png]]
493 +[[image:image-20230802112413-51.png||height="184" width="696"]]
550 550  
551 -[[image:image-20230802112413-48.png]]
552 552  
553 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
554 554  
555 -[[image:image-20230802112413-49.png]]
497 +== 3.8 TCP Connection ==
556 556  
557 -== 1.4. tago data ==
558 558  
500 +(% style="color:blue" %)**AT command:**
559 559  
560 -[[image:image-20230802112413-50.png]]
502 +* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
561 561  
562 -[[image:image-20230802112413-51.png]]
504 +* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
563 563  
564 -== 1.4. TLS mode ==
506 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
565 565  
566 -Users can choose to use SSL/TLS mode.
567 567  
568 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
569 569  
570 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
510 +(% style="color:blue" %)**Sensor Console Output when Uplink:**
571 571  
572 -* Profile Name: “Any name”
573 -* Broker Address: mqtt.tago.io
574 -* Broker Port: 8883
575 -* Client ID: “Any value”
576 -* User Name: “Any value” Tago validates your user by the token only
577 -* Password: “Your device token”
578 -* PUBTOPIC: “Any value”
579 -* SUBTOPIC: “Any value”
512 +[[image:image-20230807233631-1.png]]
580 580  
581 -[[image:image-20230802112413-52.png]]
582 582  
515 +(% style="color:blue" %)**See result in TCP Server:**
583 583  
517 +[[image:image-20230807233631-2.png]]
518 +
519 +
584 584  
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +373.9 KB
Content