Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 53.9
edited by Xiaoling
on 2023/08/02 11:57
Change comment: There is no comment for this version
To version 105.2
edited by Xiaoling
on 2023/11/06 16:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="wikigeneratedid" %)
1 +(% class="wikigeneratedid" id="HTableofContents:" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
... ... @@ -5,6 +5,9 @@
5 5  
6 6  
7 7  
8 +
9 +
10 +
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,20 +11,50 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
17 += 2. Attach Network =
15 15  
19 +== 2.1 General Configure to attach network ==
16 16  
21 +
22 +To attache NB-IoT sensors to NB-IoT Network, You need to:
23 +
24 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
25 +1. Insert the SIM card to Sensor
26 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
27 +
28 +[[image:image-20230808205045-1.png||height="293" width="438"]]
29 +
30 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
31 +
17 17  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
34 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
35 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
36 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
37 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
23 23  
24 -== 2.1 1NCE SIM Card. ==
39 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
40 +)))|(% style="width:135px" %)
41 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
42 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
25 25  
26 26  
27 27  
46 +== 2.2 Speed Up Network Attach time ==
47 +
48 +
49 +BC660K-GL supports multi bands (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85. **(%%) It will search one by one and try to attach, this will take a lot of time and even cause attach fail. User can lock the band to specify band for its operator to make this faster.
50 +
51 +(% style="color:#037691" %)**AT+QBAND?       ** (%%) ~/~/ Check what is the current used frequency band
52 +
53 +(% style="color:#037691" %)**AT+QBAND=1,4    ** (%%) ~/~/ Set to use 1 frequency band. Band4
54 +
55 +(% style="color:#037691" %)**AT+QBAND=2,8,20**  (%%) ~/~/ Set to use 2 frequency bands. Band 8 and Band 20
56 +
57 +
58 +See bands used for different provider:** [[NB-IoT Deployment , Bands, Operator list>>http://wiki.dragino.com/xwiki/bin/view/Main/NB-IoT%20Deployment%20%2C%20Bands%2C%20Operator%20list/]]**
59 +
60 +
28 28  = 3. Configure to connect to different servers =
29 29  
30 30  == 3.1 General UDP Connection ==
... ... @@ -38,7 +38,7 @@
38 38  
39 39  We can use PC tool to simulate UDP connection to make sure server works ok.
40 40  
41 -[[image:image-20230802112413-1.png]]
74 +[[image:image-20230802112413-1.png||height="468" width="1024"]]
42 42  
43 43  
44 44  === 3.1.2 Configure NB-IoT Sensor ===
... ... @@ -88,7 +88,7 @@
88 88  
89 89  [[image:image-20230802112413-4.png]]
90 90  
91 -[[image:image-20230802112413-5.png]]
124 +[[image:image-20230802112413-5.png||height="530" width="987"]]
92 92  
93 93  (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
94 94  
... ... @@ -100,14 +100,14 @@
100 100  
101 101  [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
102 102  
103 -[[image:image-20230802112413-6.png]]
136 +[[image:image-20230802112413-6.png||height="336" width="925"]]
104 104  
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
141 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
143 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -117,51 +117,63 @@
117 117  * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
118 118  
119 119  * (% style="color:#037691" %)**Broker Port:**(%%) 1883
153 +
120 120  * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
155 +
121 121  * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
157 +
122 122  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
123 123  
124 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
125 125  
161 +
162 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
163 +
164 +
126 126  [[image:image-20230802112413-9.png]]
127 127  
128 128  [[image:image-20230802112413-10.png]]
129 129  
130 -In MQTT.fx, we can publish below info:
131 131  
132 -* Topic: channels/YOUR_CHANNEL_ID/publish
133 -* Payload: field1=63&field2=67&status=MQTTPUBLISH
170 +(% style="color:blue" %)**In MQTT.fx, we can publish below info:**
134 134  
172 +* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
173 +
174 +* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
175 +
135 135  Where 63 and 67 are the value to be published to field1 & field2.
136 136  
137 137  
138 -Result:
179 +(% style="color:blue" %)**Result: **
139 139  
140 -[[image:image-20230802112413-11.png]]
181 +[[image:image-20230802112413-11.png||height="539" width="901"]]
141 141  
142 142  
143 -== 1.3 Configure NB-IoT Sensor for connection ==
184 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
144 144  
145 -=== 1.3.1 AT Commands: ===
186 +==== 3.3.3.1 AT Commands: ====
146 146  
188 +
147 147  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
148 148  
149 -* AT+PRO=3,1   ~/~/Set to use ThingSpeak Server and Related Payload
191 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
150 150  
151 -* AT+CLIENT=<Your ThingSpeak MQTT ClientID>
193 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
152 152  
153 -* AT+UNAME=<Your ThingSpeak MQTT User Name>
195 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
154 154  
155 -* AT+PWD=<Your ThingSpeak MQTT Password>
197 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
156 156  
157 -* AT+PUBTOPIC=<YOUR_CHANNEL_ID>
199 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
158 158  
159 -* AT+SUBTOPIC=<YOUR_CHANNEL_ID>
201 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
160 160  
161 -=== 1.3.2 Uplink Examples ===
162 162  
163 -For S31-NB
164 164  
205 +==== 3.3.3.2 Uplink Examples ====
206 +
207 +
208 +[[image:image-20230816201942-1.png]]
209 +
165 165  For SE01-NB
166 166  
167 167  For DDS20-NB
... ... @@ -185,338 +185,255 @@
185 185  For SN50V3-NB
186 186  
187 187  
188 -=== 1.3.2 Map fields to sensor value ===
233 +==== 3.3.3.3 Map fields to sensor value ====
189 189  
235 +
190 190  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
191 191  
192 192  
193 -[[image:image-20230802112413-12.png]]
239 +[[image:image-20230802112413-12.png||height="504" width="1011"]]
194 194  
195 -[[image:image-20230802112413-13.png]]
241 +[[image:image-20230802112413-13.png||height="331" width="978"]]
196 196  
197 197  
198 198  Below is the NB-IoT Product Table show the mapping.
199 199  
200 -|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
201 -Field9
246 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
247 +|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
248 +|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
249 +|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
250 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
251 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
252 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
253 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
254 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
255 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
256 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
257 +|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
258 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
259 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
260 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
261 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
262 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
263 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
264 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
202 202  
203 -
204 -)))|(% colspan="1" rowspan="1" %)(((
205 -Field10
206 206  
207 -
208 -)))
209 -|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
210 -|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
211 -|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
212 -Battery
213 213  
214 -
215 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
216 -|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
217 -Battery
268 +== 3.4 [[Datacake>>https://datacake.co/]] ==
218 218  
219 -
220 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 -|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
222 -Battery
223 223  
224 -
225 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
226 -|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
227 -Battery
271 +(% class="wikigeneratedid" %)
272 +Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
228 228  
229 -
230 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
231 -|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 -|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
233 -|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
234 -|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
235 -|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
236 -|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 -|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
238 -|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
239 -DS18B20 Temp
240 240  
241 -
242 -)))|(% colspan="1" rowspan="1" %)(((
243 -exit_state/input PA4
275 +(% class="wikigeneratedid" %)
276 +As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**
244 244  
245 -
246 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
247 -|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
248 -Battery
278 +* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
249 249  
250 -
251 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
252 -exit_state/input PA4
280 +* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
253 253  
254 -
255 -)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
256 -|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
257 -Battery
258 258  
259 -
260 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
261 -DS18B20 Temp
262 262  
263 -
264 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
265 -exit_state/input PA4
284 +=== 3.4.1 Create device ===
266 266  
267 -
268 -)))|(% colspan="1" rowspan="1" %)(((
269 -DS18B20 Temp2
270 270  
271 -
272 -)))|(% colspan="1" rowspan="1" %)(((
273 -DS18B20 Temp3
287 +(% style="color:blue" %)**Add Device**(%%) in DataCake.
274 274  
275 -
276 -)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
277 -|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
278 -Battery
289 +[[image:image-20230808162301-1.png||height="453" width="952"]]
279 279  
280 -
281 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
282 -DS18B20 Temp
283 283  
284 -
285 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
286 -exit_state/input PA4
292 +[[image:image-20230808162342-2.png||height="541" width="952"]]
287 287  
288 -
289 -)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
290 -|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
291 -Battery
292 292  
293 -
294 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
295 +(% style="color:blue" %)**Choose the correct model**(%%) from template.
295 295  
296 -= 4. Datacake =
297 +[[image:image-20230808162421-3.png]]
297 297  
298 -== 1.1 Define Product ==
299 299  
300 -Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
300 +(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
301 301  
302 +[[image:image-20230808163612-7.png||height="549" width="952"]]
302 302  
303 -By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
304 +[[image:image-20230808163035-5.png]]
304 304  
305 -[[image:image-20230802112413-14.png]]
306 +[[image:image-20230808163049-6.png||height="544" width="926"]]
306 306  
307 -== 1.2 Create Device ==
308 308  
309 -In the second step you have to define the device which should be added to the product.
309 +=== 3.4.2 Scan QR code to obtain data ===
310 310  
311 -[[image:image-20230802112413-15.png]]
312 312  
313 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
312 +Users can use their phones or computers to scan QR codes to obtain device data information.
314 314  
314 +[[image:image-20230808170051-8.png||height="255" width="259"]]
315 315  
316 -== 1.3 Create Database Fields ==
316 +[[image:image-20230808170548-9.png]]
317 317  
318 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
319 319  
320 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
319 +=== 3.4.2 AT command for connecting to DataCake ===
321 321  
322 -[[image:image-20230802112413-16.png]]
323 323  
324 -[[image:image-20230802112413-17.png]]
322 +(% style="color:blue" %)**AT+PRO=2,0**
325 325  
326 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
324 +(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
327 327  
328 -This will open another modal asking for some required input for your first field.
329 329  
330 -[[image:image-20230802112413-18.png]]
327 +== 3.5 Node-Red (via MQTT) ==
331 331  
332 -[[image:image-20230802112413-19.png]]
329 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
333 333  
334 -== 1.4 Set up Broker ==
335 335  
336 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
332 +Take S31-NB UDP protocol as an example.
337 337  
338 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
334 +Dragino provides input flow examples for the sensors.
339 339  
340 -View your Personal Access Token
336 +User can download the required JSON file through Dragino Node-RED input flow template.
341 341  
342 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
338 +Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
343 343  
344 -[[image:image-20230802112413-20.png]]
340 +We can directly import the template.
345 345  
346 -MQTT Client-ID
342 +The templates for S31-NB and NB95S31B are the same.
347 347  
348 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
349 349  
350 -AT+CLIENT=“Any value”
345 +[[image:image-20230809173127-4.png]]
351 351  
352 -AT+UNAME=Token
353 353  
354 -AT+PWD=Token
348 +Please select the NB95S31B template.
355 355  
356 -[[image:image-20230802112413-21.png]]
350 +[[image:image-20230809173310-5.png||height="558" width="926"]]
357 357  
352 +[[image:image-20230809173438-6.png]]
358 358  
359 -== 1.6 Create your first Subscription ==
354 +[[image:image-20230809173800-7.png]]
360 360  
361 -Subscribe
362 362  
363 -Data is published according to the following structure:
357 +Successfully imported template.
364 364  
365 -dtck~/~//
359 +[[image:image-20230809173835-8.png||height="515" width="860"]]
366 366  
367 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
368 368  
362 +Users can set UDP port.
369 369  
370 -[[image:image-20230802112413-22.png]]
364 +[[image:image-20230809174053-9.png]]
371 371  
372 372  
373 -[[image:image-20230802112413-23.png]]
367 +=== 3.5.2 Simulate Connection ===
374 374  
375 375  
376 -[[image:image-20230802112413-24.png]]
370 +We have completed the configuration of UDP. We can try sending packets to node red.
377 377  
372 +[[image:image-20230810083934-1.png]]
378 378  
379 -example:
374 +[[image:image-20230810084048-2.png||height="535" width="1052"]]
380 380  
381 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
382 382  
383 -[[image:image-20230802112413-25.png]]
377 +=== 3.5.3 Configure NB-IoT Sensors ===
384 384  
385 -== 1.7 Define Publish Topic ==
386 386  
387 -Publish
380 +* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
388 388  
389 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
382 +* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
390 390  
391 -Due to the nature of MQTT, the topic prefix differs as follows:
392 392  
393 -dtck-pub~/~//
394 394  
395 -example:
386 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
396 396  
397 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
388 +=== 3.6.1 Configure ThingsBoard ===
398 398  
399 -== 1.8 upload data ==
390 +==== 3.6.1.1 Create Device ====
400 400  
401 -[[image:image-20230802112413-26.png]]
402 402  
403 -[[image:image-20230802112413-27.png]]
393 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
404 404  
405 -[[image:image-20230802112413-28.png]]
395 +[[image:image-20230802112413-32.png||height="583" width="1066"]]
406 406  
407 -= =
408 408  
409 -= 5. Node-Red (via MQTT) =
398 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
410 410  
411 411  
412 -== 1.1 Configure Node-Red ==
401 +(% style="color:blue" %)**Uplink Converter**
413 413  
414 -[[image:image-20230802112413-29.png]]
403 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
415 415  
416 -[[image:image-20230802112413-30.png]]
405 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
417 417  
418 -== 1.2 Simulate Connection ==
407 +[[image:image-20230802112413-33.png||height="597" width="1061"]]
419 419  
420 -[[image:image-20230802112413-31.png]]
421 421  
422 -== 1.3 Configure NB-IoT Sensors ==
410 +(% style="color:blue" %)**Downlink Converter**
423 423  
424 -* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
425 -* AT+CLIENT=any value
426 -* AT+UNAME=any value
427 -* AT+PWD=any value
428 -* AT+PUBTOPIC=any value
429 -* AT+SUBTOPIC=any value
412 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
430 430  
431 -= 6. ThingsBoard.Cloud (via MQTT) =
414 +[[image:image-20230802112413-34.png||height="598" width="1063"]]
432 432  
433 -== 1.1 Configure ThingsBoard ==
416 +(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
434 434  
435 -=== 1.1.1 Create Device ===
436 436  
437 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
419 +==== 3.6.1.3 MQTT Integration Setup ====
438 438  
439 -[[image:image-20230802112413-32.png]]
440 440  
441 -=== 1.1.2 Create Uplink & Downlink Converter ===
422 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
442 442  
443 -Uplink Converter
424 +[[image:image-20230802112413-35.png||height="597" width="1062"]]
444 444  
445 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
446 446  
447 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
448 -
449 -[[image:image-20230802112413-33.png]]
450 -
451 -
452 -Downlink Converter
453 -
454 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
455 -
456 -[[image:image-20230802112413-34.png]]
457 -
458 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
459 -
460 -=== 1.1.3 MQTT Integration Setup ===
461 -
462 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
463 -
464 -[[image:image-20230802112413-35.png]]
465 -
466 466  * The next steps is to add the recently created uplink and downlink converters;
467 467  
468 -[[image:image-20230802112413-36.png]]
429 +[[image:image-20230802112413-36.png||height="598" width="1062"]]
469 469  
470 -[[image:image-20230802112413-37.png]]
431 +[[image:image-20230802112413-37.png||height="598" width="1064"]]
471 471  
472 -Add a topic filter:
473 473  
434 +(% style="color:blue" %)**Add a topic filter:**
474 474  
475 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
436 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
476 476  
477 477  You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
478 478  
479 -[[image:image-20230802112413-38.png]]
440 +[[image:image-20230802112413-38.png||height="598" width="1064"]]
480 480  
481 -== 1.2 Simulate with MQTT.fx ==
482 482  
483 -[[image:image-20230802112413-39.png]]
443 +=== 3.6.2 Simulate with MQTT.fx ===
484 484  
485 -[[image:image-20230802112413-40.png]]
486 486  
487 -== 1.3 Configure NB-IoT Sensor ==
446 +[[image:image-20230802112413-39.png]]
488 488  
489 -AT Commands
448 +[[image:image-20230802112413-40.png||height="525" width="980"]]
490 490  
491 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
492 492  
493 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
451 +=== 3.6.3 Configure NB-IoT Sensor ===
494 494  
495 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
496 496  
454 +(% style="color:blue" %)**AT Commands**
497 497  
498 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
456 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
499 499  
500 -CLIENT :“Any value”
458 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
501 501  
502 -User Name:“Any value”
460 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
503 503  
504 -Password:“Any value”
462 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
505 505  
464 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
506 506  
466 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
467 +
507 507  Test Uplink by click the button for 1 second
508 508  
509 -[[image:image-20230802112413-41.png]]
470 +[[image:image-20230802112413-41.png||height="496" width="828"]]
510 510  
511 511  [[image:image-20230802112413-42.png]]
512 512  
513 -[[image:image-20230802112413-43.png]]
474 +[[image:image-20230802112413-43.png||height="407" width="825"]]
514 514  
515 515  
516 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
477 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
517 517  
518 -== 5.1 Create device & Get Credentials ==
479 +=== 3.7.1 Create device & Get Credentials ===
519 519  
481 +
520 520  We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
521 521  
522 522  [[image:image-20230802112413-44.png]]
... ... @@ -523,7 +523,6 @@
523 523  
524 524  [[image:image-20230802112413-45.png]]
525 525  
526 -= =
527 527  
528 528  Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
529 529  
... ... @@ -530,55 +530,87 @@
530 530  [[image:image-20230802112413-46.png]]
531 531  
532 532  
533 -On the Connection Profile window, set the following information: (这边加一个截图)
494 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
534 534  
535 -* Profile Name: “Any name”
536 -* Broker Address: mqtt.tago.io
537 -* Broker Port: 1883
538 -* Client ID: “Any value”
496 +(% style="color:blue" %)**On the Connection Profile window, set the following information:**
539 539  
540 -On the section User credentials, set the following information:(这边加一个截图)
498 +* (% style="color:#037691" %)**Profile Name: “Any name”**
541 541  
542 -* User Name: “Any value” Tago validates your user by the token only
543 -* Password: “Your device token”
544 -* PUBTOPIC: “Any value”
545 -* SUBTOPIC: “Any value”
500 +* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
546 546  
547 -== 5.2 Simulate with MQTT.fx ==
502 +* (% style="color:#037691" %)**Broker Port: 8883**
548 548  
549 -[[image:image-20230802112413-47.png]]
504 +* (% style="color:#037691" %)**Client ID: “Any value”**
550 550  
551 -[[image:image-20230802112413-48.png]]
506 +(% style="color:blue" %)**On the section User credentials, set the following information:**
552 552  
553 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
508 +* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
554 554  
555 -[[image:image-20230802112413-49.png]]
510 +* (% style="color:#037691" %)**Password: “Your device token”**
556 556  
557 -== 1.4. tago data ==
512 +* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
558 558  
514 +* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
559 559  
560 -[[image:image-20230802112413-50.png]]
516 +(% style="color:blue" %)**AT command:**
561 561  
562 -[[image:image-20230802112413-51.png]]
518 +* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
563 563  
564 -== 1.4. TLS mode ==
520 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
565 565  
566 -Users can choose to use SSL/TLS mode.
522 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
567 567  
568 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
524 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
569 569  
570 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
526 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
571 571  
572 -* Profile Name: “Any name”
573 -* Broker Address: mqtt.tago.io
574 -* Broker Port: 8883
575 -* Client ID: “Any value”
576 -* User Name: “Any value” Tago validates your user by the token only
577 -* Password: “Your device token”
578 -* PUBTOPIC: “Any value”
579 -* SUBTOPIC: “Any value”
528 +* (% style="color:#037691" %)**AT+PWD=“Your device token”**
580 580  
530 +
531 +
532 +=== 3.7.2 Simulate with MQTT.fx ===
533 +
534 +
581 581  [[image:image-20230802112413-52.png]]
582 582  
583 583  
584 -
538 +[[image:image-20230808105300-2.png||height="553" width="1026"]]
539 +
540 +
541 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
542 +
543 +[[image:image-20230808105217-1.png||height="556" width="1031"]]
544 +
545 +[[image:image-20230808105329-3.png]]
546 +
547 +
548 +=== 3.7.3 tago data ===
549 +
550 +
551 +[[image:image-20230802112413-50.png||height="242" width="1037"]]
552 +
553 +[[image:image-20230802112413-51.png||height="184" width="696"]]
554 +
555 +
556 +== 3.8 TCP Connection ==
557 +
558 +
559 +(% style="color:blue" %)**AT command:**
560 +
561 +* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
562 +
563 +* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
564 +
565 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
566 +
567 +
568 +
569 +(% style="color:blue" %)**Sensor Console Output when Uplink:**
570 +
571 +[[image:image-20230807233631-1.png]]
572 +
573 +
574 +(% style="color:blue" %)**See result in TCP Server:**
575 +
576 +[[image:image-20230807233631-2.png]]
577 +
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20230816201942-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +99.8 KB
Content