Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 53.9
edited by Xiaoling
on 2023/08/02 11:57
Change comment: There is no comment for this version
To version 104.3
edited by Xiaoling
on 2023/10/07 10:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="wikigeneratedid" %)
1 +(% class="wikigeneratedid" id="HTableofContents:" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
... ... @@ -5,6 +5,9 @@
5 5  
6 6  
7 7  
8 +
9 +
10 +
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,20 +11,46 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
17 += 2. Attach Network =
15 15  
19 +== 2.1 General Configure to attach network ==
16 16  
21 +To attache NB-IoT sensors to NB-IoT Network, You need to:
22 +
23 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
24 +1. Insert the SIM card to Sensor
25 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
26 +
27 +[[image:image-20230808205045-1.png||height="293" width="438"]]
28 +
29 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
30 +
17 17  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
33 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
34 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
35 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
36 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
23 23  
24 -== 2.1 1NCE SIM Card. ==
38 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
39 +)))|(% style="width:135px" %)
40 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
41 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
25 25  
43 +(% class="wikigeneratedid" %)
44 +== ==
26 26  
46 +== 2.2 Speed Up Network Attach time ==
27 27  
48 +
49 +BC660K-GL supports multi bands (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85. **(%%) It will search one by one and try to attach, this will take a lot of time and even cause attach fail. User can lock the band to specify band for its operator to make this faster.
50 +
51 +(% style="color:#037691" %)**AT+QBAND?       ** (%%) ~/~/ Check what is the current used frequency band
52 +
53 +(% style="color:#037691" %)**AT+QBAND=1,4    ** (%%) ~/~/ Set to use 1 frequency band. Band4
54 +
55 +(% style="color:#037691" %)**AT+QBAND=2,8,20**  (%%) ~/~/ Set to use 2 frequency bands. Band 8 and Band 20
56 +
28 28  = 3. Configure to connect to different servers =
29 29  
30 30  == 3.1 General UDP Connection ==
... ... @@ -88,7 +88,7 @@
88 88  
89 89  [[image:image-20230802112413-4.png]]
90 90  
91 -[[image:image-20230802112413-5.png]]
120 +[[image:image-20230802112413-5.png||height="530" width="987"]]
92 92  
93 93  (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
94 94  
... ... @@ -100,14 +100,14 @@
100 100  
101 101  [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
102 102  
103 -[[image:image-20230802112413-6.png]]
132 +[[image:image-20230802112413-6.png||height="336" width="925"]]
104 104  
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
137 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
139 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -117,50 +117,57 @@
117 117  * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
118 118  
119 119  * (% style="color:#037691" %)**Broker Port:**(%%) 1883
149 +
120 120  * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
151 +
121 121  * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
153 +
122 122  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
123 123  
124 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
156 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
125 125  
158 +
126 126  [[image:image-20230802112413-9.png]]
127 127  
128 128  [[image:image-20230802112413-10.png]]
129 129  
130 -In MQTT.fx, we can publish below info:
131 131  
132 -* Topic: channels/YOUR_CHANNEL_ID/publish
133 -* Payload: field1=63&field2=67&status=MQTTPUBLISH
164 +(% style="color:blue" %)**In MQTT.fx, we can publish below info:**
134 134  
166 +* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
167 +
168 +* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
169 +
135 135  Where 63 and 67 are the value to be published to field1 & field2.
136 136  
137 137  
138 -Result:
173 +(% style="color:blue" %)**Result: **
139 139  
140 -[[image:image-20230802112413-11.png]]
175 +[[image:image-20230802112413-11.png||height="539" width="901"]]
141 141  
142 142  
143 -== 1.3 Configure NB-IoT Sensor for connection ==
178 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
144 144  
145 -=== 1.3.1 AT Commands: ===
180 +==== 3.3.3.1 AT Commands: ====
146 146  
182 +
147 147  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
148 148  
149 -* AT+PRO=3,1   ~/~/Set to use ThingSpeak Server and Related Payload
185 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
150 150  
151 -* AT+CLIENT=<Your ThingSpeak MQTT ClientID>
187 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
152 152  
153 -* AT+UNAME=<Your ThingSpeak MQTT User Name>
189 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
154 154  
155 -* AT+PWD=<Your ThingSpeak MQTT Password>
191 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
156 156  
157 -* AT+PUBTOPIC=<YOUR_CHANNEL_ID>
193 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
158 158  
159 -* AT+SUBTOPIC=<YOUR_CHANNEL_ID>
195 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
160 160  
161 -=== 1.3.2 Uplink Examples ===
197 +==== 3.3.3.2 Uplink Examples ====
162 162  
163 -For S31-NB
199 +[[image:image-20230816201942-1.png]]
164 164  
165 165  For SE01-NB
166 166  
... ... @@ -185,400 +185,336 @@
185 185  For SN50V3-NB
186 186  
187 187  
188 -=== 1.3.2 Map fields to sensor value ===
224 +==== 3.3.3.3 Map fields to sensor value ====
189 189  
226 +
190 190  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
191 191  
192 192  
193 -[[image:image-20230802112413-12.png]]
230 +[[image:image-20230802112413-12.png||height="504" width="1011"]]
194 194  
195 -[[image:image-20230802112413-13.png]]
232 +[[image:image-20230802112413-13.png||height="331" width="978"]]
196 196  
197 197  
198 198  Below is the NB-IoT Product Table show the mapping.
199 199  
200 -|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
201 -Field9
237 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
238 +|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
239 +|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
240 +|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
241 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
242 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
243 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
244 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
245 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
246 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
247 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
248 +|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
249 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
250 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
251 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
252 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
253 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
254 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
255 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
202 202  
203 -
204 -)))|(% colspan="1" rowspan="1" %)(((
205 -Field10
257 +== 3.4 [[Datacake>>https://datacake.co/]] ==
206 206  
207 -
208 -)))
209 -|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
210 -|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
211 -|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
212 -Battery
213 213  
214 -
215 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
216 -|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
217 -Battery
260 +(% class="wikigeneratedid" %)
261 +Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
218 218  
219 -
220 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 -|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
222 -Battery
223 223  
224 -
225 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
226 -|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
227 -Battery
264 +(% class="wikigeneratedid" %)
265 +As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**
228 228  
229 -
230 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
231 -|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 -|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
233 -|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
234 -|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
235 -|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
236 -|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 -|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
238 -|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
239 -DS18B20 Temp
267 +* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
240 240  
241 -
242 -)))|(% colspan="1" rowspan="1" %)(((
243 -exit_state/input PA4
269 +* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
244 244  
245 -
246 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
247 -|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
248 -Battery
271 +=== 3.4.1 Create device ===
249 249  
250 -
251 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
252 -exit_state/input PA4
253 253  
254 -
255 -)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
256 -|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
257 -Battery
274 +(% style="color:blue" %)**Add Device**(%%) in DataCake.
258 258  
259 -
260 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
261 -DS18B20 Temp
276 +[[image:image-20230808162301-1.png||height="473" width="994"]]
262 262  
263 -
264 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
265 -exit_state/input PA4
266 266  
267 -
268 -)))|(% colspan="1" rowspan="1" %)(((
269 -DS18B20 Temp2
279 +[[image:image-20230808162342-2.png]]
270 270  
271 -
272 -)))|(% colspan="1" rowspan="1" %)(((
273 -DS18B20 Temp3
274 274  
275 -
276 -)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
277 -|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
278 -Battery
282 +(% style="color:blue" %)**Choose the correct model**(%%) from template.
279 279  
280 -
281 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
282 -DS18B20 Temp
284 +[[image:image-20230808162421-3.png]]
283 283  
284 -
285 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
286 -exit_state/input PA4
287 287  
288 -
289 -)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
290 -|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
291 -Battery
287 +(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
292 292  
293 -
294 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
289 +[[image:image-20230808163612-7.png]]
295 295  
296 -= 4. Datacake =
291 +[[image:image-20230808163035-5.png]]
297 297  
298 -== 1.1 Define Product ==
293 +[[image:image-20230808163049-6.png]]
299 299  
300 -Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
301 301  
296 +=== 3.4.2 Scan QR code to obtain data ===
302 302  
303 -By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
304 304  
305 -[[image:image-20230802112413-14.png]]
299 +Users can use their phones or computers to scan QR codes to obtain device data information.
306 306  
307 -== 1.2 Create Device ==
301 +[[image:image-20230808170051-8.png||height="255" width="259"]]
308 308  
309 -In the second step you have to define the device which should be added to the product.
303 +[[image:image-20230808170548-9.png]]
310 310  
311 -[[image:image-20230802112413-15.png]]
312 312  
313 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
306 +=== 3.4.2 AT command for connecting to DataCake ===
314 314  
315 315  
316 -== 1.3 Create Database Fields ==
309 +(% style="color:blue" %)**AT+PRO=2,0**
317 317  
318 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
311 +(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
319 319  
320 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
321 321  
322 -[[image:image-20230802112413-16.png]]
314 +== 3.5 Node-Red (via MQTT) ==
323 323  
324 -[[image:image-20230802112413-17.png]]
316 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
325 325  
326 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
327 327  
328 -This will open another modal asking for some required input for your first field.
319 +Take S31-NB UDP protocol as an example.
329 329  
330 -[[image:image-20230802112413-18.png]]
321 +Dragino provides input flow examples for the sensors.
331 331  
332 -[[image:image-20230802112413-19.png]]
323 +User can download the required JSON file through Dragino Node-RED input flow template.
333 333  
334 -== 1.4 Set up Broker ==
325 +Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
335 335  
336 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
327 +We can directly import the template.
337 337  
338 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
329 +The templates for S31-NB and NB95S31B are the same.
339 339  
340 -View your Personal Access Token
341 341  
342 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
332 +[[image:image-20230809173127-4.png]]
343 343  
344 -[[image:image-20230802112413-20.png]]
345 345  
346 -MQTT Client-ID
335 +Please select the NB95S31B template.
347 347  
348 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
337 +[[image:image-20230809173310-5.png]]
349 349  
350 -AT+CLIENT=“Any value”
339 +[[image:image-20230809173438-6.png]]
351 351  
352 -AT+UNAME=Token
341 +[[image:image-20230809173800-7.png]]
353 353  
354 -AT+PWD=Token
355 355  
356 -[[image:image-20230802112413-21.png]]
344 +Successfully imported template.
357 357  
346 +[[image:image-20230809173835-8.png]]
358 358  
359 -== 1.6 Create your first Subscription ==
360 360  
361 -Subscribe
349 +Users can set UDP port.
362 362  
363 -Data is published according to the following structure:
351 +[[image:image-20230809174053-9.png]]
364 364  
365 -dtck~/~//
366 366  
367 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
354 +=== 3.5.2 Simulate Connection ===
368 368  
369 369  
370 -[[image:image-20230802112413-22.png]]
357 +We have completed the configuration of UDP. We can try sending packets to node red.
371 371  
359 +[[image:image-20230810083934-1.png]]
372 372  
373 -[[image:image-20230802112413-23.png]]
361 +[[image:image-20230810084048-2.png]]
374 374  
363 +=== 3.5.3 Configure NB-IoT Sensors ===
375 375  
376 -[[image:image-20230802112413-24.png]]
377 377  
366 +* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
378 378  
379 -example:
368 +* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
380 380  
381 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
370 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
382 382  
383 -[[image:image-20230802112413-25.png]]
372 +=== 3.6.1 Configure ThingsBoard ===
384 384  
385 -== 1.7 Define Publish Topic ==
374 +==== 3.6.1.1 Create Device ====
386 386  
387 -Publish
388 388  
389 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
377 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
390 390  
391 -Due to the nature of MQTT, the topic prefix differs as follows:
379 +[[image:image-20230802112413-32.png]]
392 392  
393 -dtck-pub~/~//
394 394  
395 -example:
382 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
396 396  
397 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
398 398  
399 -== 1.8 upload data ==
385 +(% style="color:blue" %)**Uplink Converter**
400 400  
401 -[[image:image-20230802112413-26.png]]
387 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
402 402  
403 -[[image:image-20230802112413-27.png]]
389 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
404 404  
405 -[[image:image-20230802112413-28.png]]
391 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
406 406  
407 -= =
408 408  
409 -= 5. Node-Red (via MQTT) =
394 +(% style="color:blue" %)**Downlink Converter**
410 410  
396 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
411 411  
412 -== 1.1 Configure Node-Red ==
398 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
413 413  
414 -[[image:image-20230802112413-29.png]]
400 +(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
415 415  
416 -[[image:image-20230802112413-30.png]]
417 417  
418 -== 1.2 Simulate Connection ==
403 +==== 3.6.1.3 MQTT Integration Setup ====
419 419  
420 -[[image:image-20230802112413-31.png]]
421 421  
422 -== 1.3 Configure NB-IoT Sensors ==
406 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
423 423  
424 -* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
425 -* AT+CLIENT=any value
426 -* AT+UNAME=any value
427 -* AT+PWD=any value
428 -* AT+PUBTOPIC=any value
429 -* AT+SUBTOPIC=any value
408 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
430 430  
431 -= 6. ThingsBoard.Cloud (via MQTT) =
432 432  
433 -== 1.1 Configure ThingsBoard ==
411 +* The next steps is to add the recently created uplink and downlink converters;
434 434  
435 -=== 1.1.1 Create Device ===
413 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
436 436  
437 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
415 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
438 438  
439 -[[image:image-20230802112413-32.png]]
440 440  
441 -=== 1.1.2 Create Uplink & Downlink Converter ===
418 +(% style="color:blue" %)**Add a topic filter:**
442 442  
443 -Uplink Converter
420 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
444 444  
445 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
422 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
446 446  
447 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
424 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
448 448  
449 -[[image:image-20230802112413-33.png]]
450 450  
427 +=== 3.6.2 Simulate with MQTT.fx ===
451 451  
452 -Downlink Converter
453 453  
454 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
430 +[[image:image-20230802112413-39.png]]
455 455  
456 -[[image:image-20230802112413-34.png]]
432 +[[image:image-20230802112413-40.png]]
457 457  
458 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
459 459  
460 -=== 1.1.3 MQTT Integration Setup ===
435 +=== 3.6.3 Configure NB-IoT Sensor ===
461 461  
462 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
463 463  
464 -[[image:image-20230802112413-35.png]]
438 +(% style="color:blue" %)**AT Commands**
465 465  
466 -* The next steps is to add the recently created uplink and downlink converters;
440 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
467 467  
468 -[[image:image-20230802112413-36.png]]
442 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
469 469  
470 -[[image:image-20230802112413-37.png]]
444 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
471 471  
472 -Add a topic filter:
446 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
473 473  
448 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
474 474  
475 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
450 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
476 476  
477 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
452 +Test Uplink by click the button for 1 second
478 478  
479 -[[image:image-20230802112413-38.png]]
454 +[[image:image-20230802112413-41.png]]
480 480  
481 -== 1.2 Simulate with MQTT.fx ==
456 +[[image:image-20230802112413-42.png]]
482 482  
483 -[[image:image-20230802112413-39.png]]
458 +[[image:image-20230802112413-43.png]]
484 484  
485 -[[image:image-20230802112413-40.png]]
486 486  
487 -== 1.3 Configure NB-IoT Sensor ==
461 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
488 488  
489 -AT Commands
463 +=== 3.7.1 Create device & Get Credentials ===
490 490  
491 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
492 492  
493 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
466 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
494 494  
495 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
468 +[[image:image-20230802112413-44.png]]
496 496  
470 +[[image:image-20230802112413-45.png]]
497 497  
498 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
499 499  
500 -CLIENT :“Any value”
473 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
501 501  
502 -User Name:“Any value”
475 +[[image:image-20230802112413-46.png]]
503 503  
504 -Password:“Any value”
505 505  
478 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
506 506  
507 -Test Uplink by click the button for 1 second
480 +(% style="color:blue" %)**On the Connection Profile window, set the following information:**
508 508  
509 -[[image:image-20230802112413-41.png]]
482 +* (% style="color:#037691" %)**Profile Name: “Any name”**
510 510  
511 -[[image:image-20230802112413-42.png]]
484 +* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
512 512  
513 -[[image:image-20230802112413-43.png]]
486 +* (% style="color:#037691" %)**Broker Port: 8883**
514 514  
488 +* (% style="color:#037691" %)**Client ID: “Any value”**
515 515  
516 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
490 +(% style="color:blue" %)**On the section User credentials, set the following information:**
517 517  
518 -== 5.1 Create device & Get Credentials ==
492 +* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
519 519  
520 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
494 +* (% style="color:#037691" %)**Password: “Your device token”**
521 521  
522 -[[image:image-20230802112413-44.png]]
496 +* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
523 523  
524 -[[image:image-20230802112413-45.png]]
498 +* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
525 525  
526 -= =
500 +(% style="color:blue" %)**AT command:**
527 527  
528 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
502 +* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
529 529  
530 -[[image:image-20230802112413-46.png]]
504 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
531 531  
506 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
532 532  
533 -On the Connection Profile window, set the following information: (这边加一个截图)
508 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
534 534  
535 -* Profile Name: “Any name”
536 -* Broker Address: mqtt.tago.io
537 -* Broker Port: 1883
538 -* Client ID: “Any value”
510 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
539 539  
540 -On the section User credentials, set the following information:(这边加一个截图)
512 +* (% style="color:#037691" %)**AT+PWD=“Your device token”**
541 541  
542 -* User Name: “Any value” Tago validates your user by the token only
543 -* Password: “Your device token”
544 -* PUBTOPIC: “Any value”
545 -* SUBTOPIC: “Any value”
514 +=== 3.7.2 Simulate with MQTT.fx ===
546 546  
547 -== 5.2 Simulate with MQTT.fx ==
548 548  
549 -[[image:image-20230802112413-47.png]]
517 +[[image:image-20230802112413-52.png]]
550 550  
551 -[[image:image-20230802112413-48.png]]
552 552  
553 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
520 +[[image:image-20230808105300-2.png]]
554 554  
555 -[[image:image-20230802112413-49.png]]
556 556  
557 -== 1.4. tago data ==
523 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
558 558  
525 +[[image:image-20230808105217-1.png]]
559 559  
527 +[[image:image-20230808105329-3.png]]
528 +
529 +
530 +=== 3.7.3 tago data ===
531 +
532 +
560 560  [[image:image-20230802112413-50.png]]
561 561  
562 -[[image:image-20230802112413-51.png]]
535 +[[image:image-20230802112413-51.png||height="184" width="696"]]
563 563  
564 -== 1.4. TLS mode ==
565 565  
566 -Users can choose to use SSL/TLS mode.
538 +== 3.8 TCP Connection ==
567 567  
568 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
569 569  
570 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
541 +(% style="color:blue" %)**AT command:**
571 571  
572 -* Profile Name: “Any name”
573 -* Broker Address: mqtt.tago.io
574 -* Broker Port: 8883
575 -* Client ID: “Any value”
576 -* User Name: “Any value” Tago validates your user by the token only
577 -* Password: “Your device token”
578 -* PUBTOPIC: “Any value”
579 -* SUBTOPIC: “Any value”
543 +* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
580 580  
581 -[[image:image-20230802112413-52.png]]
545 +* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
582 582  
547 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
583 583  
584 -
549 +(% style="color:blue" %)**Sensor Console Output when Uplink:**
550 +
551 +[[image:image-20230807233631-1.png]]
552 +
553 +
554 +(% style="color:blue" %)**See result in TCP Server:**
555 +
556 +[[image:image-20230807233631-2.png]]
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20230816201942-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +99.8 KB
Content