Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 53.22
edited by Xiaoling
on 2023/08/02 14:25
Change comment: There is no comment for this version
To version 100.2
edited by Xiaoling
on 2023/08/15 17:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="wikigeneratedid" %)
1 +(% class="wikigeneratedid" id="HTableofContents:" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
... ... @@ -5,6 +5,9 @@
5 5  
6 6  
7 7  
8 +
9 +
10 +
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,17 +11,30 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
17 += 2. Attach Network =
15 15  
16 16  
20 +To attache NB-IoT sensors to NB-IoT Network, You need to:
21 +
22 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
23 +1. Insert the SIM card to Sensor
24 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
25 +
26 +[[image:image-20230808205045-1.png||height="293" width="438"]]
27 +
28 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
29 +
17 17  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
32 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
33 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
34 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
35 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
23 23  
24 -== 2.1 1NCE SIM Card. ==
37 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
38 +)))|(% style="width:135px" %)
39 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
40 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
25 25  
26 26  
27 27  
... ... @@ -105,9 +105,9 @@
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
124 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
126 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -125,12 +125,15 @@
125 125  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
126 126  
127 127  
128 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
129 129  
145 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
146 +
147 +
130 130  [[image:image-20230802112413-9.png]]
131 131  
132 132  [[image:image-20230802112413-10.png]]
133 133  
152 +
134 134  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
135 135  
136 136  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
... ... @@ -145,29 +145,30 @@
145 145  [[image:image-20230802112413-11.png]]
146 146  
147 147  
148 -== 3.3 Configure NB-IoT Sensor for connection ==
167 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
149 149  
150 -=== 3.3.1 AT Commands: ===
169 +==== 3.3.3.1 AT Commands: ====
151 151  
152 152  
153 153  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
154 154  
155 -* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
174 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
156 156  
157 -* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
176 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
158 158  
159 -* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
178 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
160 160  
161 -* **AT+PWD=<Your ThingSpeak MQTT Password>**
180 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
162 162  
163 -* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
182 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
164 164  
165 -* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
184 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
166 166  
167 167  
168 -=== 3.3.2 Uplink Examples ===
169 169  
188 +==== 3.3.3.2 Uplink Examples ====
170 170  
190 +
171 171  For S31-NB
172 172  
173 173  For SE01-NB
... ... @@ -193,7 +193,7 @@
193 193  For SN50V3-NB
194 194  
195 195  
196 -=== 3.3.3 Map fields to sensor value ===
216 +==== 3.3.3.3 Map fields to sensor value ====
197 197  
198 198  
199 199  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
... ... @@ -206,182 +206,143 @@
206 206  
207 207  Below is the NB-IoT Product Table show the mapping.
208 208  
209 -(% border="1" cellspacing="4" style="width:1386px;background-color:#F2F2F2" %)
210 -|(% style="width:124px;background-color:#4F81BD" %) |(% style="width:91px;background-color:#4F81BD;color:white" %)Field1|(% style="width:102px;background-color:#4F81BD;color:white" %)Field2|(% style="width:159px;background-color:#4F81BD;color:white" %)Field3|(% style="width:153px;background-color:#4F81BD;color:white" %)Field4|(% style="width:152px;background-color:#4F81BD;color:white" %)Field5|(% style="width:148px;background-color:#4F81BD;color:white" %)Field6|(% style="width:164px;background-color:#4F81BD;color:white" %)Field7|(% style="width:152px;background-color:#4F81BD;color:white" %)Field8|(% style="width:66px;background-color:#4F81BD;color:white" %)Field9|(% style="width:66px;background-color:#4F81BD;color:white" %)Field10
211 -|(% style="width:124px;background-color:#4F81BD;color:white" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
212 -|(% style="width:124px;background-color:#4F81BD;color:white" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
213 -|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
214 -|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
215 -|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
216 -|(% style="width:124px;background-color:#4F81BD;color:white" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
217 -|(% rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
218 -|(% style="width:124px;background-color:#4F81BD;color:white" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
219 -|(% style="width:124px;background-color:#4F81BD;color:white" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
220 -|(% style="width:124px;background-color:#4F81BD;color:white" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 -|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
222 -|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)SN50V3-NB|(% colspan="1" rowspan="1" style="width:91px" %) |(% colspan="1" rowspan="1" style="width:102px" %) |(% colspan="1" rowspan="1" style="width:159px" %) |(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
223 -|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
224 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
225 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
226 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
227 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
228 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
229 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
230 +|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
231 +|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 +|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
234 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
237 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
238 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
239 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
240 +|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
241 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
242 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
243 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
244 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
245 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
246 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
247 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
229 229  
230 230  
231 231  
232 -== 3.4 Datacake ==
251 +== 3.4 [[Datacake>>https://datacake.co/]] ==
233 233  
234 -== 3.4.1 Define Product ==
235 235  
254 +(% class="wikigeneratedid" %)
255 +Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
236 236  
237 -Firstly, we need to set the MQTT mode to datacake, and we need to run** AT+PRO=3,2**. This command is set to datacake. After running the command, the device automatically sets the server address, port.
238 238  
258 +(% class="wikigeneratedid" %)
259 +As example for S31B-NB. there are two versions: S31B-NB-1D and S31B-NB-GE.
239 239  
240 -By chosing to add the device under a (% style="color:blue" %)**"New Product"**(%%) you are required to give a name for this product. You can name it something like "My First MQTT Product".
261 +* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
241 241  
242 -[[image:image-20230802112413-14.png]]
263 +* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
243 243  
244 244  
245 -=== 3.4.2 Create Device ===
246 246  
267 +=== 3.4.1 Create device ===
247 247  
248 -In the second step you have to define the device which should be added to the product.
249 249  
250 -[[image:image-20230802112413-15.png]]
270 +**Add Device** in DataCake.
251 251  
252 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
272 +[[image:image-20230808162301-1.png]]
253 253  
254 254  
255 -=== 3.4.3 Create Database Fields ===
275 +[[image:image-20230808162342-2.png]]
256 256  
257 257  
258 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
278 +**Choose the correct model** from template.
259 259  
260 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
280 +[[image:image-20230808162421-3.png]]
261 261  
262 -[[image:image-20230802112413-16.png]]
263 263  
264 -[[image:image-20230802112413-17.png]]
283 +**Fill Device ID**. The device ID needs to be filled in with IMEI, and a prefix of** 'f' **needs to be added.
265 265  
266 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
285 +[[image:image-20230808163612-7.png]]
267 267  
268 -This will open another modal asking for some required input for your first field.
287 +[[image:image-20230808163035-5.png]]
269 269  
270 -[[image:image-20230802112413-18.png]]
289 +[[image:image-20230808163049-6.png]]
271 271  
272 -[[image:image-20230802112413-19.png]]
273 273  
292 +=== 3.4.2 Scan QR code to obtain data ===
274 274  
275 -=== 3.4.4 Set up Broker ===
276 276  
295 +Users can use their phones or computers to scan QR codes to obtain device data information.
277 277  
278 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
297 +[[image:image-20230808170051-8.png||height="255" width="259"]]
279 279  
280 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
299 +[[image:image-20230808170548-9.png]]
281 281  
282 -View your Personal Access Token
283 283  
284 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
302 +=== 3.4.2 AT command for connecting to DataCake ===
285 285  
286 -[[image:image-20230802112413-20.png]]
287 287  
288 -(% style="color:blue" %)**MQTT Client-ID**
305 +(% style="color:blue" %)**AT+PRO=2,0**
289 289  
290 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
307 +(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
291 291  
292 -(% style="color:blue" %)**AT+CLIENT=“Any value”**
293 293  
294 -(% style="color:blue" %)**AT+UNAME=Token**
310 +== 3.5 Node-Red (via MQTT) ==
295 295  
296 -(% style="color:blue" %)**AT+PWD=Token**
312 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
297 297  
298 -[[image:image-20230802112413-21.png]]
299 299  
315 +Take S31-NB UDP protocol as an example.
300 300  
301 -=== 3.4.5 Create your first Subscription ===
317 +Dragino provides input flow examples for the sensors.
302 302  
319 +User can download the required JSON file through Dragino Node-RED input flow template.
303 303  
304 -(% style="color:blue" %)**Subscribe**
321 +Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
305 305  
306 -Data is published according to the following structure:
323 +We can directly import the template.
307 307  
308 -dtck~/~//
325 +The templates for S31-NB and NB95S31B are the same.
309 309  
310 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
311 311  
328 +[[image:image-20230809173127-4.png]]
312 312  
313 -[[image:image-20230802112413-22.png]]
314 314  
331 +Please select the NB95S31B template.
315 315  
316 -[[image:image-20230802112413-23.png]]
333 +[[image:image-20230809173310-5.png]]
317 317  
335 +[[image:image-20230809173438-6.png]]
318 318  
319 -[[image:image-20230802112413-24.png]]
337 +[[image:image-20230809173800-7.png]]
320 320  
321 321  
322 -(% style="color:blue" %)**example:**
340 +Successfully imported template.
323 323  
324 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
342 +[[image:image-20230809173835-8.png]]
325 325  
326 -[[image:image-20230802112413-25.png]]
327 327  
345 +Users can set UDP port.
328 328  
329 -=== 3.4.6 Define Publish Topic ===
347 +[[image:image-20230809174053-9.png]]
330 330  
331 331  
332 -(% style="color:blue" %)**Publish**
333 -
334 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
335 -
336 -Due to the nature of MQTT, the topic prefix differs as follows:
337 -
338 -dtck-pub~/~//
339 -
340 -(% style="color:blue" %)**example:**
341 -
342 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
343 -
344 -
345 -=== 3.4.7 upload data ===
346 -
347 -
348 -[[image:image-20230802112413-26.png]]
349 -
350 -[[image:image-20230802112413-27.png]]
351 -
352 -[[image:image-20230802112413-28.png]]
353 -
354 -
355 -== 3.5 Node-Red (via MQTT) ==
356 -
357 -=== 3.5.1 Configure Node-Red ===
358 -
359 -[[image:image-20230802112413-29.png]]
360 -
361 -[[image:image-20230802112413-30.png]]
362 -
363 363  === 3.5.2 Simulate Connection ===
364 364  
365 365  
366 -[[image:image-20230802112413-31.png]]
353 +We have completed the configuration of UDP. We can try sending packets to node red.
367 367  
355 +[[image:image-20230810083934-1.png]]
368 368  
357 +[[image:image-20230810084048-2.png]]
358 +
369 369  === 3.5.3 Configure NB-IoT Sensors ===
370 370  
371 371  
372 -* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/Set to mqtt Server and  Payload
362 +* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
373 373  
374 -* (% style="color:blue" %)**AT+CLIENT=any value**(%%)
364 +* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
375 375  
376 -* (% style="color:blue" %)**AT+UNAME=any value**(%%)
377 -
378 -* (% style="color:blue" %)**AT+PWD=any value**(%%)
379 -
380 -* (% style="color:blue" %)**AT+PUBTOPIC=any value**(%%)
381 -
382 -* (% style="color:blue" %)**AT+SUBTOPIC=any value**(%%)
383 -
384 -
385 385  == 3.6 ThingsBoard.Cloud (via MQTT) ==
386 386  
387 387  === 3.6.1 Configure ThingsBoard ===
... ... @@ -388,19 +388,22 @@
388 388  
389 389  ==== 3.6.1.1 Create Device ====
390 390  
391 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
392 392  
373 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
374 +
393 393  [[image:image-20230802112413-32.png]]
394 394  
395 -==== 3.6.2.2 Create Uplink & Downlink Converter ====
396 396  
378 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
379 +
380 +
397 397  (% style="color:blue" %)**Uplink Converter**
398 398  
399 399  The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
400 400  
401 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
385 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
402 402  
403 -[[image:image-20230802112413-33.png]]
387 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
404 404  
405 405  
406 406  (% style="color:blue" %)**Downlink Converter**
... ... @@ -407,58 +407,60 @@
407 407  
408 408  The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
409 409  
410 -[[image:image-20230802112413-34.png]]
394 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
411 411  
412 -(% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
396 +(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
413 413  
414 414  
415 -=== 1.1.3 MQTT Integration Setup ===
399 +==== 3.6.1.3 MQTT Integration Setup ====
416 416  
417 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
418 418  
419 -[[image:image-20230802112413-35.png]]
402 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
420 420  
404 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
405 +
406 +
421 421  * The next steps is to add the recently created uplink and downlink converters;
422 422  
423 -[[image:image-20230802112413-36.png]]
409 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
424 424  
425 -[[image:image-20230802112413-37.png]]
411 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
426 426  
427 -Add a topic filter:
428 428  
414 +(% style="color:blue" %)**Add a topic filter:**
429 429  
430 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
416 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
431 431  
432 432  You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
433 433  
434 -[[image:image-20230802112413-38.png]]
420 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
435 435  
436 -== 1.2 Simulate with MQTT.fx ==
437 437  
423 +=== 3.6.2 Simulate with MQTT.fx ===
424 +
425 +
438 438  [[image:image-20230802112413-39.png]]
439 439  
440 440  [[image:image-20230802112413-40.png]]
441 441  
442 -== 1.3 Configure NB-IoT Sensor ==
443 443  
444 -AT Commands
431 +=== 3.6.3 Configure NB-IoT Sensor ===
445 445  
446 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
447 447  
448 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
434 +(% style="color:blue" %)**AT Commands**
449 449  
450 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
436 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
451 451  
438 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
452 452  
453 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
440 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
454 454  
455 -CLIENT :“Any value”
442 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
456 456  
457 -User Name:“Any value”
444 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
458 458  
459 -Password:“Any value”
446 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
460 460  
461 -
462 462  Test Uplink by click the button for 1 second
463 463  
464 464  [[image:image-20230802112413-41.png]]
... ... @@ -468,10 +468,11 @@
468 468  [[image:image-20230802112413-43.png]]
469 469  
470 470  
471 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
457 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
472 472  
473 -== 5.1 Create device & Get Credentials ==
459 +=== 3.7.1 Create device & Get Credentials ===
474 474  
461 +
475 475  We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
476 476  
477 477  [[image:image-20230802112413-44.png]]
... ... @@ -478,7 +478,6 @@
478 478  
479 479  [[image:image-20230802112413-45.png]]
480 480  
481 -= =
482 482  
483 483  Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
484 484  
... ... @@ -485,55 +485,82 @@
485 485  [[image:image-20230802112413-46.png]]
486 486  
487 487  
488 -On the Connection Profile window, set the following information: (这边加一个截图)
474 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
489 489  
490 -* Profile Name: “Any name”
491 -* Broker Address: mqtt.tago.io
492 -* Broker Port: 1883
493 -* Client ID: “Any value”
476 +(% style="color:blue" %)**On the Connection Profile window, set the following information:**
494 494  
495 -On the section User credentials, set the following information:(这边加一个截图)
478 +* (% style="color:#037691" %)**Profile Name: “Any name”**
496 496  
497 -* User Name: “Any value” Tago validates your user by the token only
498 -* Password: “Your device token”
499 -* PUBTOPIC: “Any value”
500 -* SUBTOPIC: “Any value”
480 +* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
501 501  
502 -== 5.2 Simulate with MQTT.fx ==
482 +* (% style="color:#037691" %)**Broker Port: 8883**
503 503  
504 -[[image:image-20230802112413-47.png]]
484 +* (% style="color:#037691" %)**Client ID: “Any value”**
505 505  
506 -[[image:image-20230802112413-48.png]]
486 +(% style="color:blue" %)**On the section User credentials, set the following information:**
507 507  
508 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
488 +* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
509 509  
510 -[[image:image-20230802112413-49.png]]
490 +* (% style="color:#037691" %)**Password: “Your device token”**
511 511  
512 -== 1.4. tago data ==
492 +* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
513 513  
494 +* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
514 514  
515 -[[image:image-20230802112413-50.png]]
496 +(% style="color:blue" %)**AT command:**
516 516  
517 -[[image:image-20230802112413-51.png]]
498 +* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
518 518  
519 -== 1.4. TLS mode ==
500 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
520 520  
521 -Users can choose to use SSL/TLS mode.
502 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
522 522  
523 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
504 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
524 524  
525 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
506 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
526 526  
527 -* Profile Name: “Any name”
528 -* Broker Address: mqtt.tago.io
529 -* Broker Port: 8883
530 -* Client ID: “Any value”
531 -* User Name: “Any value” Tago validates your user by the token only
532 -* Password: “Your device token”
533 -* PUBTOPIC: “Any value”
534 -* SUBTOPIC: “Any value”
508 +* (% style="color:#037691" %)**AT+PWD=“Your device token”**
535 535  
510 +=== 3.7.2 Simulate with MQTT.fx ===
511 +
512 +
536 536  [[image:image-20230802112413-52.png]]
537 537  
538 538  
539 -
516 +[[image:image-20230808105300-2.png]]
517 +
518 +
519 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
520 +
521 +[[image:image-20230808105217-1.png]]
522 +
523 +[[image:image-20230808105329-3.png]]
524 +
525 +
526 +=== 3.7.3 tago data ===
527 +
528 +
529 +[[image:image-20230802112413-50.png]]
530 +
531 +[[image:image-20230802112413-51.png||height="184" width="696"]]
532 +
533 +
534 +== 3.8 TCP Connection ==
535 +
536 +
537 +(% style="color:blue" %)**AT command:**
538 +
539 +* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
540 +
541 +* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
542 +
543 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
544 +
545 +(% style="color:blue" %)**Sensor Console Output when Uplink:**
546 +
547 +[[image:image-20230807233631-1.png]]
548 +
549 +
550 +(% style="color:blue" %)**See result in TCP Server:**
551 +
552 +[[image:image-20230807233631-2.png]]
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content