Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 53.21
edited by Xiaoling
on 2023/08/02 14:23
Change comment: There is no comment for this version
To version 99.3
edited by Xiaoling
on 2023/08/11 11:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,9 @@
1 -(% class="wikigeneratedid" %)
1 +(% class="wikigeneratedid" id="HTableofContents:" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
5 5  
6 6  
7 -
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,17 +11,30 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
13 += 2. Attach Network =
15 15  
16 16  
16 +To attache NB-IoT sensors to NB-IoT Network, You need to:
17 +
18 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 +1. Insert the SIM card to Sensor
20 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
21 +
22 +[[image:image-20230808205045-1.png||height="293" width="438"]]
23 +
24 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25 +
17 17  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
28 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
29 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
30 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
31 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
23 23  
24 -== 2.1 1NCE SIM Card. ==
33 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
34 +)))|(% style="width:135px" %)
35 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
36 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
25 25  
26 26  
27 27  
... ... @@ -105,9 +105,9 @@
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
120 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
122 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -125,12 +125,15 @@
125 125  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
126 126  
127 127  
128 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
129 129  
141 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
142 +
143 +
130 130  [[image:image-20230802112413-9.png]]
131 131  
132 132  [[image:image-20230802112413-10.png]]
133 133  
148 +
134 134  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
135 135  
136 136  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
... ... @@ -145,29 +145,30 @@
145 145  [[image:image-20230802112413-11.png]]
146 146  
147 147  
148 -== 3.3 Configure NB-IoT Sensor for connection ==
163 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
149 149  
150 -=== 3.3.1 AT Commands: ===
165 +==== 3.3.3.1 AT Commands: ====
151 151  
152 152  
153 153  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
154 154  
155 -* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
170 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
156 156  
157 -* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
172 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
158 158  
159 -* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
174 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
160 160  
161 -* **AT+PWD=<Your ThingSpeak MQTT Password>**
176 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
162 162  
163 -* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
178 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
164 164  
165 -* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
180 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
166 166  
167 167  
168 -=== 3.3.2 Uplink Examples ===
169 169  
184 +==== 3.3.3.2 Uplink Examples ====
170 170  
186 +
171 171  For S31-NB
172 172  
173 173  For SE01-NB
... ... @@ -193,7 +193,7 @@
193 193  For SN50V3-NB
194 194  
195 195  
196 -=== 3.3.3 Map fields to sensor value ===
212 +==== 3.3.3.3 Map fields to sensor value ====
197 197  
198 198  
199 199  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
... ... @@ -206,333 +206,313 @@
206 206  
207 207  Below is the NB-IoT Product Table show the mapping.
208 208  
209 -(% border="1" cellspacing="4" style="width:1386px;background-color:#F2F2F2" %)
210 -|(% style="width:124px;background-color:#4F81BD" %) |(% style="width:91px;background-color:#4F81BD;color:white" %)Field1|(% style="width:102px;background-color:#4F81BD;color:white" %)Field2|(% style="width:159px;background-color:#4F81BD;color:white" %)Field3|(% style="width:153px;background-color:#4F81BD;color:white" %)Field4|(% style="width:152px;background-color:#4F81BD;color:white" %)Field5|(% style="width:148px;background-color:#4F81BD;color:white" %)Field6|(% style="width:164px;background-color:#4F81BD;color:white" %)Field7|(% style="width:152px;background-color:#4F81BD;color:white" %)Field8|(% style="width:66px;background-color:#4F81BD;color:white" %)Field9|(% style="width:66px;background-color:#4F81BD;color:white" %)Field10
211 -|(% style="width:124px;background-color:#4F81BD;color:white" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
212 -|(% style="width:124px;background-color:#4F81BD;color:white" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
213 -|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
214 -|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
215 -|(% style="width:124px;background-color:#4F81BD;color:white" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
216 -|(% style="width:124px;background-color:#4F81BD;color:white" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
217 -|(% rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
218 -|(% style="width:124px;background-color:#4F81BD;color:white" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
219 -|(% style="width:124px;background-color:#4F81BD;color:white" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
220 -|(% style="width:124px;background-color:#4F81BD;color:white" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 -|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
222 -|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)SN50V3-NB|(% colspan="1" rowspan="1" style="width:91px" %) |(% colspan="1" rowspan="1" style="width:102px" %) |(% colspan="1" rowspan="1" style="width:159px" %) |(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
223 -|(% colspan="1" rowspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
224 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
225 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
226 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
227 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
228 -|(% colspan="1" style="width:124px;background-color:#4F81BD;color:white" %)mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
225 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
226 +|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
227 +|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
228 +|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
229 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
230 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
234 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 +|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
237 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
238 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
239 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
240 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
241 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
242 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
243 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
229 229  
230 230  
231 231  
232 232  == 3.4 Datacake ==
233 233  
234 -== 3.4.1 Define Product ==
249 +=== 3.4.1 Create device ===
235 235  
236 236  
237 -Firstly, we need to set the MQTT mode to datacake, and we need to run** AT+PRO=3,2**. This command is set to datacake. After running the command, the device automatically sets the server address, port.
252 +[[image:image-20230808162301-1.png]]
238 238  
239 239  
240 -By chosing to add the device under a (% style="color:blue" %)**"New Product"**(%%) you are required to give a name for this product. You can name it something like "My First MQTT Product".
255 +[[image:image-20230808162342-2.png]]
241 241  
242 -[[image:image-20230802112413-14.png]]
243 243  
258 +[[image:image-20230808162421-3.png]]
244 244  
245 -=== 3.4.2 Create Device ===
246 246  
261 +The device ID needs to be filled in with IMEI, and a prefix of** 'f' **needs to be added.
247 247  
248 -In the second step you have to define the device which should be added to the product.
263 +[[image:image-20230808163612-7.png]]
249 249  
250 -[[image:image-20230802112413-15.png]]
265 +[[image:image-20230808163035-5.png]]
251 251  
252 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
267 +[[image:image-20230808163049-6.png]]
253 253  
254 254  
255 -=== 3.4.3 Create Database Fields ===
270 +=== 3.4.2 Scan QR code to obtain data ===
256 256  
257 257  
258 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
273 +Users can use their phones or computers to scan QR codes to obtain device data information.
259 259  
260 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
275 +[[image:image-20230808170051-8.png]]
261 261  
262 -[[image:image-20230802112413-16.png]]
277 +[[image:image-20230808170548-9.png]]
263 263  
264 -[[image:image-20230802112413-17.png]]
265 265  
266 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
280 +=== 3.4.2 AT command for connecting to DataCake ===
267 267  
268 -This will open another modal asking for some required input for your first field.
269 269  
270 -[[image:image-20230802112413-18.png]]
283 +(% style="color:blue" %)**AT+PRO=2,0**
271 271  
272 -[[image:image-20230802112413-19.png]]
285 +(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
273 273  
274 274  
275 -=== 3.4.4 Set up Broker ===
288 +== 3.5 Node-Red (via MQTT) ==
276 276  
290 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
277 277  
278 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
279 279  
280 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
293 +Take S31-NB UDP protocol as an example.
281 281  
282 -View your Personal Access Token
295 +Dragino provides input flow examples for the sensors.
283 283  
284 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
297 +User can download the required JSON file through Dragino Node-RED input flow template.
285 285  
286 -[[image:image-20230802112413-20.png]]
299 +Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
287 287  
288 -(% style="color:blue" %)**MQTT Client-ID**
301 +We can directly import the template.
289 289  
290 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
303 +The templates for S31-NB and NB95S31B are the same.
291 291  
292 -(% style="color:blue" %)**AT+CLIENT=“Any value”**
293 293  
294 -(% style="color:blue" %)**AT+UNAME=Token**
306 +[[image:image-20230809173127-4.png]]
295 295  
296 -(% style="color:blue" %)**AT+PWD=Token**
297 297  
298 -[[image:image-20230802112413-21.png]]
309 +Please select the NB95S31B template.
299 299  
311 +[[image:image-20230809173310-5.png]]
300 300  
301 -=== 3.4.5 Create your first Subscription ===
313 +[[image:image-20230809173438-6.png]]
302 302  
315 +[[image:image-20230809173800-7.png]]
303 303  
304 -(% style="color:blue" %)**Subscribe**
305 305  
306 -Data is published according to the following structure:
318 +Successfully imported template.
307 307  
308 -dtck~/~//
320 +[[image:image-20230809173835-8.png]]
309 309  
310 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
311 311  
323 +Users can set UDP port.
312 312  
313 -[[image:image-20230802112413-22.png]]
325 +[[image:image-20230809174053-9.png]]
314 314  
315 315  
316 -[[image:image-20230802112413-23.png]]
328 +=== 3.5.2 Simulate Connection ===
317 317  
318 318  
319 -[[image:image-20230802112413-24.png]]
331 +We have completed the configuration of UDP. We can try sending packets to node red.
320 320  
333 +[[image:image-20230810083934-1.png]]
321 321  
322 -(% style="color:blue" %)**example:**
335 +[[image:image-20230810084048-2.png]]
323 323  
324 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
337 +=== 3.5.3 Configure NB-IoT Sensors ===
325 325  
326 -[[image:image-20230802112413-25.png]]
327 327  
340 +* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
328 328  
329 -=== 3.4.6 Define Publish Topic ===
342 +* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
330 330  
331 331  
332 -(% style="color:blue" %)**Publish**
333 333  
334 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
346 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
335 335  
336 -Due to the nature of MQTT, the topic prefix differs as follows:
348 +=== 3.6.1 Configure ThingsBoard ===
337 337  
338 -dtck-pub~/~//
350 +==== 3.6.1.1 Create Device ====
339 339  
340 -(% style="color:blue" %)**example:**
341 341  
342 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
353 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
343 343  
355 +[[image:image-20230802112413-32.png]]
344 344  
345 -=== 3.4.7 upload data ===
346 346  
358 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
347 347  
348 -[[image:image-20230802112413-26.png]]
349 349  
350 -[[image:image-20230802112413-27.png]]
361 +(% style="color:blue" %)**Uplink Converter**
351 351  
352 -[[image:image-20230802112413-28.png]]
363 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
353 353  
365 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
354 354  
355 -== 3.5 Node-Red (via MQTT) ==
367 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
356 356  
357 -=== 3.5.1 Configure Node-Red ===
358 358  
359 -[[image:image-20230802112413-29.png]]
370 +(% style="color:blue" %)**Downlink Converter**
360 360  
361 -[[image:image-20230802112413-30.png]]
372 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
362 362  
363 -=== 3.5.2 Simulate Connection ===
374 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
364 364  
376 +(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
365 365  
366 -[[image:image-20230802112413-31.png]]
367 367  
379 +==== 3.6.1.3 MQTT Integration Setup ====
368 368  
369 -=== 3.5.3 Configure NB-IoT Sensors ===
370 370  
382 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
371 371  
372 -* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/Set to mqtt Server and  Payload
384 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
373 373  
374 -* (% style="color:blue" %)**AT+CLIENT=any value**(%%)
375 375  
376 -* (% style="color:blue" %)**AT+UNAME=any value**(%%)
387 +* The next steps is to add the recently created uplink and downlink converters;
377 377  
378 -* (% style="color:blue" %)**AT+PWD=any value**(%%)
389 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
379 379  
380 -* (% style="color:blue" %)**AT+PUBTOPIC=any value**(%%)
391 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
381 381  
382 -* (% style="color:blue" %)**AT+SUBTOPIC=any value**(%%)
383 383  
394 +(% style="color:blue" %)**Add a topic filter:**
384 384  
385 -== 3.6 ThingsBoard.Cloud (via MQTT) ==
396 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
386 386  
387 -=== 3.6.1 Configure ThingsBoard ===
398 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
388 388  
389 -=== 1.1.1 Create Device ===
400 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
390 390  
391 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
392 392  
393 -[[image:image-20230802112413-32.png]]
403 +=== 3.6.2 Simulate with MQTT.fx ===
394 394  
395 -=== 1.1.2 Create Uplink & Downlink Converter ===
396 396  
397 -Uplink Converter
406 +[[image:image-20230802112413-39.png]]
398 398  
399 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
408 +[[image:image-20230802112413-40.png]]
400 400  
401 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
402 402  
403 -[[image:image-20230802112413-33.png]]
411 +=== 3.6.3 Configure NB-IoT Sensor ===
404 404  
405 405  
406 -Downlink Converter
414 +(% style="color:blue" %)**AT Commands**
407 407  
408 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
416 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
409 409  
410 -[[image:image-20230802112413-34.png]]
418 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
411 411  
412 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
420 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
413 413  
414 -=== 1.1.3 MQTT Integration Setup ===
422 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
415 415  
416 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
424 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
417 417  
418 -[[image:image-20230802112413-35.png]]
426 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
419 419  
420 -* The next steps is to add the recently created uplink and downlink converters;
428 +Test Uplink by click the button for 1 second
421 421  
422 -[[image:image-20230802112413-36.png]]
430 +[[image:image-20230802112413-41.png]]
423 423  
424 -[[image:image-20230802112413-37.png]]
432 +[[image:image-20230802112413-42.png]]
425 425  
426 -Add a topic filter:
434 +[[image:image-20230802112413-43.png]]
427 427  
428 428  
429 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
437 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
430 430  
431 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
439 +=== 3.7.1 Create device & Get Credentials ===
432 432  
433 -[[image:image-20230802112413-38.png]]
434 434  
435 -== 1.2 Simulate with MQTT.fx ==
442 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
436 436  
437 -[[image:image-20230802112413-39.png]]
444 +[[image:image-20230802112413-44.png]]
438 438  
439 -[[image:image-20230802112413-40.png]]
446 +[[image:image-20230802112413-45.png]]
440 440  
441 -== 1.3 Configure NB-IoT Sensor ==
442 442  
443 -AT Commands
449 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
444 444  
445 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
451 +[[image:image-20230802112413-46.png]]
446 446  
447 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
448 448  
449 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
454 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
450 450  
456 +(% style="color:blue" %)**On the Connection Profile window, set the following information:**
451 451  
452 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
458 +* (% style="color:#037691" %)**Profile Name: “Any name”**
453 453  
454 -CLIENT :“Any value”
460 +* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
455 455  
456 -User Name:“Any value”
462 +* (% style="color:#037691" %)**Broker Port: 8883**
457 457  
458 -Password:“Any value”
464 +* (% style="color:#037691" %)**Client ID: “Any value”**
459 459  
466 +(% style="color:blue" %)**On the section User credentials, set the following information:**
460 460  
461 -Test Uplink by click the button for 1 second
468 +* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
462 462  
463 -[[image:image-20230802112413-41.png]]
470 +* (% style="color:#037691" %)**Password: “Your device token”**
464 464  
465 -[[image:image-20230802112413-42.png]]
472 +* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
466 466  
467 -[[image:image-20230802112413-43.png]]
474 +* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
468 468  
476 +(% style="color:blue" %)**AT command:**
469 469  
470 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
478 +* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
471 471  
472 -== 5.1 Create device & Get Credentials ==
480 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
473 473  
474 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
482 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
475 475  
476 -[[image:image-20230802112413-44.png]]
484 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
477 477  
478 -[[image:image-20230802112413-45.png]]
486 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
479 479  
480 -= =
488 +* (% style="color:#037691" %)**AT+PWD=“Your device token”**
481 481  
482 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
483 483  
484 -[[image:image-20230802112413-46.png]]
485 485  
492 +=== 3.7.2 Simulate with MQTT.fx ===
486 486  
487 -On the Connection Profile window, set the following information: (这边加一个截图)
488 488  
489 -* Profile Name: “Any name”
490 -* Broker Address: mqtt.tago.io
491 -* Broker Port: 1883
492 -* Client ID: “Any value”
495 +[[image:image-20230802112413-52.png]]
493 493  
494 -On the section User credentials, set the following information:(这边加一个截图)
495 495  
496 -* User Name: “Any value” Tago validates your user by the token only
497 -* Password: “Your device token”
498 -* PUBTOPIC: “Any value”
499 -* SUBTOPIC: “Any value”
498 +[[image:image-20230808105300-2.png]]
500 500  
501 -== 5.2 Simulate with MQTT.fx ==
502 502  
503 -[[image:image-20230802112413-47.png]]
501 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
504 504  
505 -[[image:image-20230802112413-48.png]]
503 +[[image:image-20230808105217-1.png]]
506 506  
507 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
505 +[[image:image-20230808105329-3.png]]
508 508  
509 -[[image:image-20230802112413-49.png]]
510 510  
511 -== 1.4. tago data ==
508 +=== 3.7.3 tago data ===
512 512  
513 513  
514 514  [[image:image-20230802112413-50.png]]
515 515  
516 -[[image:image-20230802112413-51.png]]
513 +[[image:image-20230802112413-51.png||height="184" width="696"]]
517 517  
518 -== 1.4. TLS mode ==
519 519  
520 -Users can choose to use SSL/TLS mode.
516 +== 3.8 TCP Connection ==
521 521  
522 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
523 523  
524 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
519 +(% style="color:blue" %)**AT command:**
525 525  
526 -* Profile Name: “Any name”
527 -* Broker Address: mqtt.tago.io
528 -* Broker Port: 8883
529 -* Client ID: “Any value”
530 -* User Name: “Any value” Tago validates your user by the token only
531 -* Password: “Your device token”
532 -* PUBTOPIC: “Any value”
533 -* SUBTOPIC: “Any value”
521 +* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
534 534  
535 -[[image:image-20230802112413-52.png]]
523 +* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
536 536  
525 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
537 537  
538 -
527 +(% style="color:blue" %)**Sensor Console Output when Uplink:**
528 +
529 +[[image:image-20230807233631-1.png]]
530 +
531 +
532 +(% style="color:blue" %)**See result in TCP Server:**
533 +
534 +[[image:image-20230807233631-2.png]]
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content