Skip to Content
Last modified by Mengting Qiu on 2025/07/03 18:55
From version 53.2
edited by Xiaoling
on 2023/08/02 11:35
Change comment: There is no comment for this version
To version 65.1
edited by Edwin Chen
on 2023/08/07 23:38
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,3 +1,8 @@
1 +== **Table of Contents:** ==
2 +
3 +{{toc/}}
4 +
5 +
1 1  = 1. The use of this guideline =
2 2  
3 3  
... ... @@ -4,81 +4,103 @@
4 4  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
5 5  
6 6  
7 -= 2. Network Connection =
12 += 2. Attach Network =
8 8  
9 9  
10 -The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
15 +To attache NB-IoT sensors to NB-IoT Network, You need to:
11 11  
17 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
18 +1. Insert the SIM card to Sensor
19 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
12 12  
13 -== 2.1 1NCE SIM Card. ==
21 +(% class="mark" %)插入 SIM 卡图片
14 14  
23 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
15 15  
16 -(% border="1" cellspacing="4" style="width:510px;background-color:#F2F2F2" %)
17 -|(% style="background-color:#4F81BD;color:white" %)SIM Provider|(% style="background-color:#4F81BD;color:white" %)APN|(% style="background-color:#4F81BD;color:white" %)NB-IoT Coverage|(% style="background-color:#4F81BD;color:white" %)Comments
18 -|1NCE| | |
19 -|China Mobile| | |
25 +The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
20 20  
27 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
28 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
29 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
30 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
21 21  
32 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
33 +)))|(% style="width:135px" %)
34 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
35 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %) |(% style="width:474px" %)China Mainland|(% style="width:135px" %)
36 +
22 22  = 3. Configure to connect to different servers =
23 23  
39 +== 3.1 General UDP Connection ==
24 24  
25 -= NB-IoT 服务器对接例子 =
26 26  
27 -= 1. General UDP Connection =
28 -
29 29  The NB-IoT Sensor can send packet to server use UDP protocol.
30 30  
31 -== 1.1 Simulate UDP Connection by PC tool ==
32 32  
45 +=== 3.1.1 Simulate UDP Connection by PC tool ===
46 +
47 +
33 33  We can use PC tool to simulate UDP connection to make sure server works ok.
34 34  
35 35  [[image:image-20230802112413-1.png]]
36 36  
37 -== 1.2 Configure NB-IoT Sensor ==
38 38  
39 -=== 1.2.1 AT Commands ===
53 +=== 3.1.2 Configure NB-IoT Sensor ===
40 40  
41 -AT Commands:
55 +==== 3.1.2.1 AT Commands ====
42 42  
43 -* AT+PRO=2,0 ~/~/  Set to use UDP protocol to uplink  ,  Payload Type select Hex payload
44 -* AT+SERVADDR=120.24.4.116,5601    ~/~/  Set UDP server address and port
45 -* AT+CFM=1        ~/~/  If the server does not respond, this command is unnecessary
46 46  
58 +(% style="color:blue" %)**AT Commands:**
59 +
60 +* (% style="color:#037691" %)**AT+PRO=2,0**  (%%) ~/~/  Set to use UDP protocol to uplink ,Payload Type select Hex payload
61 +
62 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601**  (%%) ~/~/  Set UDP server address and port
63 +
64 +* (% style="color:#037691" %)**AT+CFM=1**    (%%) ~/~/  If the server does not respond, this command is unnecessary
65 +
47 47  [[image:image-20230802112413-2.png]]
48 48  
49 -=== 1.2.2 Uplink Example ===
50 50  
69 +==== 3.1.2.2 Uplink Example ====
51 51  
71 +
52 52  [[image:image-20230802112413-3.png]]
53 53  
54 54  
55 -= 2. General MQTT Connection =
75 +== 3.2 General MQTT Connection ==
56 56  
77 +
57 57  The NB-IoT Sensor can send packet to server use MQTT protocol.
58 58  
59 -Below are the commands
80 +Below are the commands.
60 60  
61 -AT Commands:
82 +(% style="color:blue" %)**AT Commands:**
62 62  
63 -* AT+PRO=3,0 ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
64 -* AT+SERVADDR=120.24.4.116,1883    ~/~/  Set MQTT server address and port
65 -* AT+CLIENT=CLIENT        ~/~/  Set up the CLIENT of MQTT
66 -* AT+UNAME=UNAME                      ~/~/  Set the username of MQTT
67 -* AT+PWD=PWD                          ~/~/  Set the password of MQTT
68 -* AT+PUBTOPIC=NSE01_PUB               ~/~/  Set the sending topic of MQTT
69 -* AT+SUBTOPIC=NSE01_SUB           ~/~/  Set the subscription topic of MQTT
84 +* (% style="color:#037691" %)**AT+PRO=3,0**   (%%) ~/~/  Set to use MQTT protocol to uplink, Payload Type select Hex payload.
70 70  
86 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883**  (%%) ~/~/  Set MQTT server address and port
87 +
88 +* (% style="color:#037691" %)**AT+CLIENT=CLIENT**     (%%) ~/~/  Set up the CLIENT of MQTT
89 +
90 +* (% style="color:#037691" %)**AT+UNAME=UNAME**        (%%) ~/~/  Set the username of MQTT
91 +
92 +* (% style="color:#037691" %)**AT+PWD=PWD**             (%%) ~/~/  Set the password of MQTT
93 +
94 +* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB**  (%%) ~/~/  Set the sending topic of MQTT
95 +
96 +* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB**  (%%) ~/~/  Set the subscription topic of MQTT
97 +
71 71  [[image:image-20230802112413-4.png]]
72 72  
73 73  [[image:image-20230802112413-5.png]]
74 74  
75 -Notice: MQTT  protocol has a much higher power consumption compare with UDP / CoAP  protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.
102 +(% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
76 76  
77 77  
105 +== 3.3 [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) ==
78 78  
79 -= 3. [[ThingSpeak>>url:https://thingspeak.com/]] (via MQTT) =
107 +=== 3.3.1 Get MQTT Credentials ===
80 80  
81 -== 1.1 Get MQTT Credentials ==
82 82  
83 83  [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
84 84  
... ... @@ -87,58 +87,69 @@
87 87  [[image:image-20230802112413-7.png]]
88 88  
89 89  
90 -== 1.2. Simulate with MQTT.fx ==
117 +=== 3.3.2 Simulate with MQTT.fx ===
91 91  
92 -=== 1.2.1 Establish MQTT Connection ===
119 +==== 3.3.2.1 Establish MQTT Connection ====
93 93  
121 +
94 94  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
95 95  
96 96  [[image:image-20230802112413-8.png]]
97 97  
98 -* Broker Address: mqtt3.thingspeak.com
99 -* Broker Port: 1883
100 -* Client ID: <Your ThingSpeak MQTT ClientID>
101 -* User Name: <Your ThingSpeak MQTT User Name>
102 -* Password: <Your ThingSpeak MQTT Password>
126 +* (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
103 103  
128 +* (% style="color:#037691" %)**Broker Port:**(%%) 1883
104 104  
105 -=== 1.2.2 Publish Data to ThingSpeak Channel ===
130 +* (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
106 106  
132 +* (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
133 +
134 +* (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
135 +
136 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
137 +
138 +
107 107  [[image:image-20230802112413-9.png]]
108 108  
109 109  [[image:image-20230802112413-10.png]]
110 110  
111 -In MQTT.fx, we can publish below info:
112 112  
113 -* Topic: channels/YOUR_CHANNEL_ID/publish
114 -* Payload: field1=63&field2=67&status=MQTTPUBLISH
144 +(% style="color:blue" %)**In MQTT.fx, we can publish below info:**
115 115  
146 +* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
116 116  
148 +* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
149 +
117 117  Where 63 and 67 are the value to be published to field1 & field2.
118 118  
119 119  
120 -Result:
153 +(% style="color:blue" %)**Result: **
121 121  
122 122  [[image:image-20230802112413-11.png]]
123 123  
124 124  
125 -== 1.3 Configure NB-IoT Sensor for connection ==
158 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
126 126  
127 -=== 1.3.1 AT Commands: ===
160 +==== 3.3.3.1 AT Commands: ====
128 128  
162 +
129 129  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
130 130  
131 -* AT+PRO=3,1   ~/~/Set to use ThingSpeak Server and Related Payload
132 -* AT+CLIENT=<Your ThingSpeak MQTT ClientID>
133 -* AT+UNAME=<Your ThingSpeak MQTT User Name>
134 -* AT+PWD=<Your ThingSpeak MQTT Password>
135 -* AT+PUBTOPIC=<YOUR_CHANNEL_ID>
136 -* AT+SUBTOPIC=<YOUR_CHANNEL_ID>
165 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
137 137  
167 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
138 138  
169 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
139 139  
140 -=== 1.3.2 Uplink Examples ===
171 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
141 141  
173 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
174 +
175 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
176 +
177 +==== 3.3.3.2 Uplink Examples ====
178 +
179 +
142 142  For S31-NB
143 143  
144 144  For SE01-NB
... ... @@ -164,8 +164,9 @@
164 164  For SN50V3-NB
165 165  
166 166  
167 -=== 1.3.2 Map fields to sensor value ===
205 +==== 3.3.3.3 Map fields to sensor value ====
168 168  
207 +
169 169  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
170 170  
171 171  
... ... @@ -176,393 +176,252 @@
176 176  
177 177  Below is the NB-IoT Product Table show the mapping.
178 178  
179 -|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
180 -Field9
218 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1386px" %)
219 +|(% style="background-color:#4f81bd; width:124px" %) |(% style="background-color:#4f81bd; color:white; width:91px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:159px" %)Field3|(% style="background-color:#4f81bd; color:white; width:153px" %)Field4|(% style="background-color:#4f81bd; color:white; width:152px" %)Field5|(% style="background-color:#4f81bd; color:white; width:148px" %)Field6|(% style="background-color:#4f81bd; color:white; width:164px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:66px" %)Field9|(% style="background-color:#4f81bd; color:white; width:66px" %)Field10
220 +|(% style="background-color:#4f81bd; color:white; width:124px" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 +|(% style="background-color:#4f81bd; color:white; width:124px" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
222 +|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
223 +|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
224 +|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
225 +|(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
226 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
227 +|(% style="background-color:#4f81bd; color:white; width:124px" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
228 +|(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
229 +|(% style="background-color:#4f81bd; color:white; width:124px" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
230 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
231 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
232 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
233 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
234 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
235 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
236 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
181 181  
182 -
183 -)))|(% colspan="1" rowspan="1" %)(((
184 -Field10
238 +== 3.4 Datacake ==
185 185  
186 -
187 -)))
188 -|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
189 -|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
190 -|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
191 -Battery
192 192  
193 -
194 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
195 -|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
196 -Battery
197 197  
198 -
199 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
200 -|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
201 -Battery
202 202  
203 -
204 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
205 -|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
206 -Battery
243 +== 3.5 Node-Red (via MQTT) ==
207 207  
208 -
209 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
210 -|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
211 -|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
212 -|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
213 -|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
214 -|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
215 -|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
216 -|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
217 -|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
218 -DS18B20 Temp
245 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
219 219  
220 -
221 -)))|(% colspan="1" rowspan="1" %)(((
222 -exit_state/input PA4
223 223  
224 -
225 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
226 -|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
227 -Battery
248 +[[image:image-20230802112413-29.png]]
228 228  
229 -
230 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
231 -exit_state/input PA4
232 232  
233 -
234 -)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
235 -|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
236 -Battery
251 +[[image:image-20230802112413-30.png]]
237 237  
238 -
239 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
240 -DS18B20 Temp
241 241  
242 -
243 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
244 -exit_state/input PA4
254 +=== 3.5.2 Simulate Connection ===
245 245  
246 -
247 -)))|(% colspan="1" rowspan="1" %)(((
248 -DS18B20 Temp2
249 249  
250 -
251 -)))|(% colspan="1" rowspan="1" %)(((
252 -DS18B20 Temp3
257 +[[image:image-20230802112413-31.png]]
253 253  
254 -
255 -)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
256 -|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
257 -Battery
258 258  
259 -
260 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
261 -DS18B20 Temp
260 +=== 3.5.3 Configure NB-IoT Sensors ===
262 262  
263 -
264 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
265 -exit_state/input PA4
266 266  
267 -
268 -)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
269 -|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
270 -Battery
263 +* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/  Set to mqtt Server and  Payload
271 271  
272 -
273 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
265 +* (% style="color:blue" %)**AT+CLIENT=any value**
274 274  
267 +* (% style="color:blue" %)**AT+UNAME=any value**
275 275  
276 -= 4. Datacake =
269 +* (% style="color:blue" %)**AT+PWD=any value**
277 277  
278 -== 1.1 Define Product ==
271 +* (% style="color:blue" %)**AT+PUBTOPIC=any value**
279 279  
280 -Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
273 +* (% style="color:blue" %)**AT+SUBTOPIC=any value**
281 281  
275 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
282 282  
283 -By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
277 +=== 3.6.1 Configure ThingsBoard ===
284 284  
285 -[[image:image-20230802112413-14.png]]
279 +==== 3.6.1.1 Create Device ====
286 286  
287 -== 1.2 Create Device ==
288 288  
289 -In the second step you have to define the device which should be added to the product.
282 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
290 290  
291 -[[image:image-20230802112413-15.png]]
284 +[[image:image-20230802112413-32.png]]
292 292  
293 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
294 294  
287 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
295 295  
296 -== 1.3 Create Database Fields ==
297 297  
298 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
290 +(% style="color:blue" %)**Uplink Converter**
299 299  
300 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
292 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
301 301  
302 -[[image:image-20230802112413-16.png]]
294 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
303 303  
304 -[[image:image-20230802112413-17.png]]
296 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
305 305  
306 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
307 307  
308 -This will open another modal asking for some required input for your first field.
299 +(% style="color:blue" %)**Downlink Converter**
309 309  
310 -[[image:image-20230802112413-18.png]]
301 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
311 311  
312 -[[image:image-20230802112413-19.png]]
303 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
313 313  
314 -== 1.4 Set up Broker ==
305 +(% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
315 315  
316 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
317 317  
318 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
308 +==== 3.6.1.3 MQTT Integration Setup ====
319 319  
320 -View your Personal Access Token
321 321  
322 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
311 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
323 323  
324 -[[image:image-20230802112413-20.png]]
313 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
325 325  
326 -MQTT Client-ID
327 327  
328 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
316 +* The next steps is to add the recently created uplink and downlink converters;
329 329  
330 -AT+CLIENT=“Any value”
318 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
331 331  
332 -AT+UNAME=Token
320 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
333 333  
334 -AT+PWD=Token
335 335  
336 -[[image:image-20230802112413-21.png]]
323 +(% style="color:blue" %)**Add a topic filter:**
337 337  
325 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
338 338  
339 -== 1.6 Create your first Subscription ==
327 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
340 340  
341 -Subscribe
329 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
342 342  
343 -Data is published according to the following structure:
344 344  
345 -dtck~/~//
332 +=== 3.6.2 Simulate with MQTT.fx ===
346 346  
347 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
348 348  
335 +[[image:image-20230802112413-39.png]]
349 349  
350 -[[image:image-20230802112413-22.png]]
337 +[[image:image-20230802112413-40.png]]
351 351  
352 352  
353 -[[image:image-20230802112413-23.png]]
340 +=== 3.6.3 Configure NB-IoT Sensor ===
354 354  
355 355  
356 -[[image:image-20230802112413-24.png]]
343 +(% style="color:blue" %)**AT Commands**
357 357  
345 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
358 358  
359 -example:
347 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>** (%%)
348 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
349 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
350 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
351 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
360 360  
361 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
353 +Test Uplink by click the button for 1 second
362 362  
363 -[[image:image-20230802112413-25.png]]
355 +[[image:image-20230802112413-41.png]]
364 364  
365 -== 1.7 Define Publish Topic ==
357 +[[image:image-20230802112413-42.png]]
366 366  
367 -Publish
359 +[[image:image-20230802112413-43.png]]
368 368  
369 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
370 370  
371 -Due to the nature of MQTT, the topic prefix differs as follows:
362 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
372 372  
373 -dtck-pub~/~//
364 +=== 3.7.1 Create device & Get Credentials ===
374 374  
375 -example:
376 376  
377 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
367 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
378 378  
379 -== 1.8 upload data ==
369 +[[image:image-20230802112413-44.png]]
380 380  
381 -[[image:image-20230802112413-26.png]]
371 +[[image:image-20230802112413-45.png]]
382 382  
383 -[[image:image-20230802112413-27.png]]
384 384  
385 -[[image:image-20230802112413-28.png]]
374 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
386 386  
387 -= =
376 +[[image:image-20230802112413-46.png]]
388 388  
389 -= 5. Node-Red (via MQTT) =
390 390  
379 +On the Connection Profile window, set the following information: **(这边加一个截图)**
391 391  
392 -== 1.1 Configure Node-Red ==
381 +* (% style="color:blue" %)**Profile Name: “Any name”**
393 393  
394 -[[image:image-20230802112413-29.png]]
383 +* (% style="color:blue" %)**Broker Address: mqtt.tago.io**
395 395  
396 -[[image:image-20230802112413-30.png]]
385 +* (% style="color:blue" %)**Broker Port: 1883**
397 397  
398 -== 1.2 Simulate Connection ==
387 +* (% style="color:blue" %)**Client ID: “Any value”**
399 399  
400 -[[image:image-20230802112413-31.png]]
389 +On the section User credentials, set the following information: **(这边加一个截图)**
401 401  
402 -== 1.3 Configure NB-IoT Sensors ==
391 +* (% style="color:blue" %)**User Name: “Any value”**  (%%) ~/~/  Tago validates your user by the token only
403 403  
404 -* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
405 -* AT+CLIENT=any value
406 -* AT+UNAME=any value
407 -* AT+PWD=any value
408 -* AT+PUBTOPIC=any value
409 -* AT+SUBTOPIC=any value
393 +* (% style="color:blue" %)**Password: “Your device token”**
410 410  
395 +* (% style="color:blue" %)**PUBTOPIC: “Any value”**
411 411  
412 -= 6. ThingsBoard.Cloud (via MQTT) =
397 +* (% style="color:blue" %)**SUBTOPIC: “Any value”**
413 413  
414 -== 1.1 Configure ThingsBoard ==
399 +=== 3.7.2 Simulate with MQTT.fx ===
415 415  
416 -=== 1.1.1 Create Device ===
417 417  
418 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
402 +[[image:image-20230802112413-47.png]]
419 419  
420 -[[image:image-20230802112413-32.png]]
404 +[[image:image-20230802112413-48.png]]
421 421  
422 -=== 1.1.2 Create Uplink & Downlink Converter ===
406 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
423 423  
424 -Uplink Converter
425 425  
426 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
409 +[[image:image-20230802112413-49.png]]
427 427  
428 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
429 429  
430 -[[image:image-20230802112413-33.png]]
412 +=== 3.7.3 tago data ===
431 431  
432 432  
433 -Downlink Converter
415 +[[image:image-20230802112413-50.png]]
434 434  
435 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
417 +[[image:image-20230802112413-51.png||height="184" width="696"]]
436 436  
437 -[[image:image-20230802112413-34.png]]
438 438  
439 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
420 +=== 3.7.4 TLS mode ===
440 440  
441 -=== 1.1.3 MQTT Integration Setup ===
442 442  
443 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
423 +Users can choose to use (% style="color:blue" %)**SSL/TLS**(%%) mode.
444 444  
445 -[[image:image-20230802112413-35.png]]
425 +On the SSL/TLS section, check the option **Enable SSL/TLS**, and click OK.
446 446  
447 -* The next steps is to add the recently created uplink and downlink converters;
427 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
448 448  
449 -[[image:image-20230802112413-36.png]]
429 +* (% style="color:blue" %)**Profile Name: “Any name”**
450 450  
451 -[[image:image-20230802112413-37.png]]
431 +* (% style="color:blue" %)**Broker Address: mqtt.tago.io**
452 452  
453 -Add a topic filter:
433 +* (% style="color:blue" %)**Broker Port: 8883**
454 454  
435 +* (% style="color:blue" %)**Client ID: “Any value”**
455 455  
456 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
437 +* (% style="color:blue" %)**User Name: “Any value”** (%%) ~/~/ Tago validates your user by the token only
457 457  
458 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
439 +* (% style="color:blue" %)**Password: “Your device token”**
459 459  
460 -[[image:image-20230802112413-38.png]]
441 +* (% style="color:blue" %)**PUBTOPIC: “Any value”**
461 461  
462 -== 1.2 Simulate with MQTT.fx ==
443 +* (% style="color:blue" %)**SUBTOPIC: “Any value”**
463 463  
464 -[[image:image-20230802112413-39.png]]
445 +[[image:image-20230802112413-52.png]]
465 465  
466 -[[image:image-20230802112413-40.png]]
467 467  
468 -== 1.3 Configure NB-IoT Sensor ==
448 +== 3.8 TCP Connection ==
469 469  
470 -AT Commands
471 471  
472 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
451 +* **AT+PRO=4,0   ** ~/~/ Set to use TCP protocol to uplink(HEX format)
452 +* **AT+PRO=4,1   ** ~/~/ Set to use TCP protocol to uplink(JSON format)
453 +* **AT+SERVADDR=120.24.4.116,5600   **~/~/ to set TCP server address and port
473 473  
474 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
455 +**Sensor Console Output when Uplink**
475 475  
476 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
457 +[[image:image-20230807233631-1.png]]
477 477  
478 478  
479 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
460 +**See result in TCP Server**
480 480  
481 -CLIENT :“Any value”
462 +[[image:image-20230807233631-2.png]]
482 482  
483 -User Name:“Any value”
484 484  
485 -Password:“Any value”
486 486  
487 -
488 -Test Uplink by click the button for 1 second
489 -
490 -[[image:image-20230802112413-41.png]]
491 -
492 -[[image:image-20230802112413-42.png]]
493 -
494 -[[image:image-20230802112413-43.png]]
495 -
496 -
497 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
498 -
499 -== 5.1 Create device & Get Credentials ==
500 -
501 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
502 -
503 -[[image:image-20230802112413-44.png]]
504 -
505 -[[image:image-20230802112413-45.png]]
506 -
507 -= =
508 -
509 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
510 -
511 -[[image:image-20230802112413-46.png]]
512 -
513 -
514 -On the Connection Profile window, set the following information: (这边加一个截图)
515 -
516 -* Profile Name: “Any name”
517 -* Broker Address: mqtt.tago.io
518 -* Broker Port: 1883
519 -* Client ID: “Any value”
520 -
521 -
522 -On the section User credentials, set the following information:(这边加一个截图)
523 -
524 -* User Name: “Any value” Tago validates your user by the token only
525 -* Password: “Your device token”
526 -* PUBTOPIC: “Any value”
527 -* SUBTOPIC: “Any value”
528 -
529 -
530 -== 5.2 Simulate with MQTT.fx ==
531 -
532 -[[image:image-20230802112413-47.png]]
533 -
534 -[[image:image-20230802112413-48.png]]
535 -
536 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
537 -
538 -[[image:image-20230802112413-49.png]]
539 -
540 -== 1.4. tago data ==
541 -
542 -
543 -[[image:image-20230802112413-50.png]]
544 -
545 -[[image:image-20230802112413-51.png]]
546 -
547 -== 1.4. TLS mode ==
548 -
549 -Users can choose to use SSL/TLS mode.
550 -
551 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
552 -
553 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
554 -
555 -* Profile Name: “Any name”
556 -* Broker Address: mqtt.tago.io
557 -* Broker Port: 8883
558 -* Client ID: “Any value”
559 -* User Name: “Any value” Tago validates your user by the token only
560 -* Password: “Your device token”
561 -* PUBTOPIC: “Any value”
562 -* SUBTOPIC: “Any value”
563 -
564 -
565 -[[image:image-20230802112413-52.png]]
566 -
567 -
568 568  
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content