Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 53.12
edited by Xiaoling
on 2023/08/02 13:44
Change comment: There is no comment for this version
To version 100.3
edited by Xiaoling
on 2023/08/15 17:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="wikigeneratedid" %)
1 +(% class="wikigeneratedid" id="HTableofContents:" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
... ... @@ -5,6 +5,9 @@
5 5  
6 6  
7 7  
8 +
9 +
10 +
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,17 +11,30 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
17 += 2. Attach Network =
15 15  
16 16  
20 +To attache NB-IoT sensors to NB-IoT Network, You need to:
21 +
22 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
23 +1. Insert the SIM card to Sensor
24 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
25 +
26 +[[image:image-20230808205045-1.png||height="293" width="438"]]
27 +
28 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
29 +
17 17  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
32 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
33 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
34 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
35 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
23 23  
24 -== 2.1 1NCE SIM Card. ==
37 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
38 +)))|(% style="width:135px" %)
39 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
40 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
25 25  
26 26  
27 27  
... ... @@ -105,9 +105,9 @@
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
124 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
126 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -126,12 +126,14 @@
126 126  
127 127  
128 128  
129 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
145 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
130 130  
147 +
131 131  [[image:image-20230802112413-9.png]]
132 132  
133 133  [[image:image-20230802112413-10.png]]
134 134  
152 +
135 135  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
136 136  
137 137  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
... ... @@ -146,28 +146,28 @@
146 146  [[image:image-20230802112413-11.png]]
147 147  
148 148  
149 -== 3.3 Configure NB-IoT Sensor for connection ==
167 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
150 150  
151 -=== 3.3.1 AT Commands: ===
169 +==== 3.3.3.1 AT Commands: ====
152 152  
153 153  
154 154  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
155 155  
156 -* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
174 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
157 157  
158 -* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
176 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
159 159  
160 -* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
178 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
161 161  
162 -* **AT+PWD=<Your ThingSpeak MQTT Password>**
180 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
163 163  
164 -* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
182 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
165 165  
166 -* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
184 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
167 167  
168 168  
169 169  
170 -=== 3.3.2 Uplink Examples ===
188 +==== 3.3.3.2 Uplink Examples ====
171 171  
172 172  
173 173  For S31-NB
... ... @@ -195,7 +195,7 @@
195 195  For SN50V3-NB
196 196  
197 197  
198 -=== 3.3.3 Map fields to sensor value ===
216 +==== 3.3.3.3 Map fields to sensor value ====
199 199  
200 200  
201 201  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
... ... @@ -208,393 +208,327 @@
208 208  
209 209  Below is the NB-IoT Product Table show the mapping.
210 210  
211 -(% border="1" cellspacing="4" style="width:1386px" %)
212 -|(% style="width:124px" %) |(% colspan="1" rowspan="1" style="width:91px" %)Field1|(% colspan="1" rowspan="1" style="width:102px" %)Field2|(% colspan="1" rowspan="1" style="width:159px" %)Field3|(% colspan="1" rowspan="1" style="width:153px" %)Field4|(% colspan="1" rowspan="1" style="width:152px" %)Field5|(% colspan="1" rowspan="1" style="width:148px" %)Field6|(% colspan="1" rowspan="1" style="width:164px" %)Field7|(% colspan="1" rowspan="1" style="width:152px" %)Field8|(% colspan="1" rowspan="1" style="width:66px" %)(((
213 -Field9
229 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
230 +|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
231 +|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 +|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
234 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 +|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
237 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
238 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
239 +|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
240 +|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
241 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
242 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
243 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
244 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
245 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
246 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
247 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
214 214  
215 -
216 -)))|(% colspan="1" rowspan="1" style="width:66px" %)(((
217 -Field10
218 218  
219 -
220 -)))
221 -|(% colspan="1" rowspan="1" style="width:124px" %)S31x-NB|(% colspan="1" rowspan="1" style="width:91px" %)Temperature |(% colspan="1" rowspan="1" style="width:102px" %)Humidity|(% colspan="1" rowspan="1" style="width:159px" %)Battery|(% colspan="1" rowspan="1" style="width:153px" %)RSSI|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
222 -|(% colspan="1" rowspan="1" style="width:124px" %)SE01-NB|(% colspan="1" rowspan="1" style="width:91px" %)Temperature |(% colspan="1" rowspan="1" style="width:102px" %)Humidity|(% colspan="1" rowspan="1" style="width:159px" %)conduct|(% colspan="1" rowspan="1" style="width:153px" %)dielectric_constant|(% colspan="1" rowspan="1" style="width:152px" %)Battery|(% colspan="1" rowspan="1" style="width:148px" %)RSSI|(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
223 -|(% colspan="1" rowspan="1" style="width:124px" %)DDS20-NB|(% colspan="1" rowspan="1" style="width:91px" %)distance|(% colspan="1" rowspan="1" style="width:102px" %)(((
224 -Battery
225 225  
226 -
227 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
228 -|(% colspan="1" rowspan="1" style="width:124px" %)DDS45-NB|(% colspan="1" rowspan="1" style="width:91px" %)distance|(% colspan="1" rowspan="1" style="width:102px" %)(((
229 -Battery
251 +== 3.4 [[Datacake>>https://datacake.co/]] ==
230 230  
231 -
232 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
233 -|(% colspan="1" rowspan="1" style="width:124px" %)DDS75-NB|(% colspan="1" rowspan="1" style="width:91px" %)distance|(% colspan="1" rowspan="1" style="width:102px" %)(((
234 -Battery
235 235  
236 -
237 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
238 -|(% colspan="1" rowspan="1" style="width:124px" %)NMDS120-NB|(% colspan="1" rowspan="1" style="width:91px" %)distance|(% colspan="1" rowspan="1" style="width:102px" %)(((
239 -Battery
254 +(% class="wikigeneratedid" %)
255 +Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
240 240  
241 -
242 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
243 -|(% colspan="1" rowspan="1" style="width:124px" %)SPH01-NB|(% colspan="1" rowspan="1" style="width:91px" %)ph|(% colspan="1" rowspan="1" style="width:102px" %)Temperature|(% colspan="1" rowspan="1" style="width:159px" %)Battery|(% colspan="1" rowspan="1" style="width:153px" %)RSSI|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
244 -|(% colspan="1" rowspan="1" style="width:124px" %)NLM01-NB|(% colspan="1" rowspan="1" style="width:91px" %)Humidity|(% colspan="1" rowspan="1" style="width:102px" %)Temperature|(% colspan="1" rowspan="1" style="width:159px" %)Battery|(% colspan="1" rowspan="1" style="width:153px" %)RSSI|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
245 -|(% colspan="1" rowspan="1" style="width:124px" %)NMDS200-NB|(% colspan="1" rowspan="1" style="width:91px" %)distance1|(% colspan="1" rowspan="1" style="width:102px" %)distance2|(% colspan="1" rowspan="1" style="width:159px" %)Battery|(% colspan="1" rowspan="1" style="width:153px" %)RSSI|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
246 -|(% colspan="1" rowspan="1" style="width:124px" %)CPN01-NB|(% colspan="1" rowspan="1" style="width:91px" %)alarm|(% colspan="1" rowspan="1" style="width:102px" %)count|(% colspan="1" rowspan="1" style="width:159px" %)door open duration|(% colspan="1" rowspan="1" style="width:153px" %)calc flag|(% colspan="1" rowspan="1" style="width:152px" %)Battery|(% colspan="1" rowspan="1" style="width:148px" %)RSSI|(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
247 -|(% colspan="1" rowspan="1" style="width:124px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
248 -|(% colspan="1" rowspan="1" style="width:124px" %)SN50V3-NB|(% colspan="1" rowspan="1" style="width:91px" %) |(% colspan="1" rowspan="1" style="width:102px" %) |(% colspan="1" rowspan="1" style="width:159px" %) |(% colspan="1" rowspan="1" style="width:153px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
249 -|(% colspan="1" rowspan="1" style="width:124px" %)mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
250 -|(% colspan="1" rowspan="1" style="width:124px" %)mod2|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)(((
251 -DS18B20 Temp
252 252  
253 -
254 -)))|(% colspan="1" rowspan="1" style="width:152px" %)(((
255 -exit_state/input PA4
258 +(% class="wikigeneratedid" %)
259 +As example for S31B-NB. there are two versions: S31B-NB-1D and S31B-NB-GE.
256 256  
257 -
258 -)))|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)distance|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
259 -|(% colspan="1" rowspan="1" style="width:124px" %)mod3|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)(((
260 -Battery
261 +* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
261 261  
262 -
263 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)adc0|(% colspan="1" rowspan="1" style="width:152px" %)(((
264 -exit_state/input PA4
263 +* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
265 265  
266 -
267 -)))|(% colspan="1" rowspan="1" style="width:148px" %)adc1|(% colspan="1" rowspan="1" style="width:164px" %)Temperature|(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %)adc4|(% colspan="1" rowspan="1" style="width:66px" %)
268 -|(% colspan="1" rowspan="1" style="width:124px" %)mod4|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)(((
269 -Battery
270 270  
271 -
272 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)(((
273 -DS18B20 Temp
274 274  
275 -
276 -)))|(% colspan="1" rowspan="1" style="width:152px" %)adc0|(% colspan="1" rowspan="1" style="width:148px" %)(((
277 -exit_state/input PA4
267 +=== 3.4.1 Create device ===
278 278  
279 -
280 -)))|(% colspan="1" rowspan="1" style="width:164px" %)(((
281 -DS18B20 Temp2
282 282  
283 -
284 -)))|(% colspan="1" rowspan="1" style="width:152px" %)(((
285 -DS18B20 Temp3
270 +**Add Device** in DataCake.
286 286  
287 -
288 -)))|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
289 -|(% colspan="1" rowspan="1" style="width:124px" %)mod5|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)(((
290 -Battery
272 +[[image:image-20230808162301-1.png]]
291 291  
292 -
293 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)(((
294 -DS18B20 Temp
295 295  
296 -
297 -)))|(% colspan="1" rowspan="1" style="width:152px" %)adc0|(% colspan="1" rowspan="1" style="width:148px" %)(((
298 -exit_state/input PA4
275 +[[image:image-20230808162342-2.png]]
299 299  
300 -
301 -)))|(% colspan="1" rowspan="1" style="width:164px" %)Weight|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
302 -|(% colspan="1" rowspan="1" style="width:124px" %)mod6|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)(((
303 -Battery
304 304  
305 -
306 -)))|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)count|(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:148px" %) |(% colspan="1" rowspan="1" style="width:164px" %) |(% colspan="1" rowspan="1" style="width:152px" %) |(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
278 +(% style="color:blue" %)**Choose the correct model**(%%) from template.
307 307  
280 +[[image:image-20230808162421-3.png]]
308 308  
309 309  
283 +(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
310 310  
311 -== 3.4 Datacake ==
285 +[[image:image-20230808163612-7.png]]
312 312  
313 -== 3.4.1 Define Product ==
287 +[[image:image-20230808163035-5.png]]
314 314  
289 +[[image:image-20230808163049-6.png]]
315 315  
316 -Firstly, we need to set the MQTT mode to datacake, and we need to run** AT+PRO=3,2**. This command is set to datacake. After running the command, the device automatically sets the server address, port.
317 317  
292 +=== 3.4.2 Scan QR code to obtain data ===
318 318  
319 -By chosing to add the device under a **"New Product"** you are required to give a name for this product. You can name it something like "My First MQTT Product".
320 320  
321 -[[image:image-20230802112413-14.png]]
295 +Users can use their phones or computers to scan QR codes to obtain device data information.
322 322  
323 -== 1.2 Create Device ==
297 +[[image:image-20230808170051-8.png||height="255" width="259"]]
324 324  
325 -In the second step you have to define the device which should be added to the product.
299 +[[image:image-20230808170548-9.png]]
326 326  
327 -[[image:image-20230802112413-15.png]]
328 328  
329 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
302 +=== 3.4.2 AT command for connecting to DataCake ===
330 330  
331 331  
332 -== 1.3 Create Database Fields ==
305 +(% style="color:blue" %)**AT+PRO=2,0**
333 333  
334 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
307 +(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
335 335  
336 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
337 337  
338 -[[image:image-20230802112413-16.png]]
310 +== 3.5 Node-Red (via MQTT) ==
339 339  
340 -[[image:image-20230802112413-17.png]]
312 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
341 341  
342 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
343 343  
344 -This will open another modal asking for some required input for your first field.
315 +Take S31-NB UDP protocol as an example.
345 345  
346 -[[image:image-20230802112413-18.png]]
317 +Dragino provides input flow examples for the sensors.
347 347  
348 -[[image:image-20230802112413-19.png]]
319 +User can download the required JSON file through Dragino Node-RED input flow template.
349 349  
350 -== 1.4 Set up Broker ==
321 +Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
351 351  
352 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
323 +We can directly import the template.
353 353  
354 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
325 +The templates for S31-NB and NB95S31B are the same.
355 355  
356 -View your Personal Access Token
357 357  
358 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
328 +[[image:image-20230809173127-4.png]]
359 359  
360 -[[image:image-20230802112413-20.png]]
361 361  
362 -MQTT Client-ID
331 +Please select the NB95S31B template.
363 363  
364 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
333 +[[image:image-20230809173310-5.png]]
365 365  
366 -AT+CLIENT=“Any value”
335 +[[image:image-20230809173438-6.png]]
367 367  
368 -AT+UNAME=Token
337 +[[image:image-20230809173800-7.png]]
369 369  
370 -AT+PWD=Token
371 371  
372 -[[image:image-20230802112413-21.png]]
340 +Successfully imported template.
373 373  
342 +[[image:image-20230809173835-8.png]]
374 374  
375 -== 1.6 Create your first Subscription ==
376 376  
377 -Subscribe
345 +Users can set UDP port.
378 378  
379 -Data is published according to the following structure:
347 +[[image:image-20230809174053-9.png]]
380 380  
381 -dtck~/~//
382 382  
383 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
350 +=== 3.5.2 Simulate Connection ===
384 384  
385 385  
386 -[[image:image-20230802112413-22.png]]
353 +We have completed the configuration of UDP. We can try sending packets to node red.
387 387  
355 +[[image:image-20230810083934-1.png]]
388 388  
389 -[[image:image-20230802112413-23.png]]
357 +[[image:image-20230810084048-2.png]]
390 390  
359 +=== 3.5.3 Configure NB-IoT Sensors ===
391 391  
392 -[[image:image-20230802112413-24.png]]
393 393  
362 +* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
394 394  
395 -example:
364 +* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
396 396  
397 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
366 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
398 398  
399 -[[image:image-20230802112413-25.png]]
368 +=== 3.6.1 Configure ThingsBoard ===
400 400  
401 -== 1.7 Define Publish Topic ==
370 +==== 3.6.1.1 Create Device ====
402 402  
403 -Publish
404 404  
405 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
373 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
406 406  
407 -Due to the nature of MQTT, the topic prefix differs as follows:
375 +[[image:image-20230802112413-32.png]]
408 408  
409 -dtck-pub~/~//
410 410  
411 -example:
378 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
412 412  
413 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
414 414  
415 -== 1.8 upload data ==
381 +(% style="color:blue" %)**Uplink Converter**
416 416  
417 -[[image:image-20230802112413-26.png]]
383 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
418 418  
419 -[[image:image-20230802112413-27.png]]
385 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
420 420  
421 -[[image:image-20230802112413-28.png]]
387 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
422 422  
423 -= =
424 424  
425 -= 5. Node-Red (via MQTT) =
390 +(% style="color:blue" %)**Downlink Converter**
426 426  
392 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
427 427  
428 -== 1.1 Configure Node-Red ==
394 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
429 429  
430 -[[image:image-20230802112413-29.png]]
396 +(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
431 431  
432 -[[image:image-20230802112413-30.png]]
433 433  
434 -== 1.2 Simulate Connection ==
399 +==== 3.6.1.3 MQTT Integration Setup ====
435 435  
436 -[[image:image-20230802112413-31.png]]
437 437  
438 -== 1.3 Configure NB-IoT Sensors ==
402 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
439 439  
440 -* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
441 -* AT+CLIENT=any value
442 -* AT+UNAME=any value
443 -* AT+PWD=any value
444 -* AT+PUBTOPIC=any value
445 -* AT+SUBTOPIC=any value
404 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
446 446  
447 -= 6. ThingsBoard.Cloud (via MQTT) =
448 448  
449 -== 1.1 Configure ThingsBoard ==
407 +* The next steps is to add the recently created uplink and downlink converters;
450 450  
451 -=== 1.1.1 Create Device ===
409 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
452 452  
453 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
411 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
454 454  
455 -[[image:image-20230802112413-32.png]]
456 456  
457 -=== 1.1.2 Create Uplink & Downlink Converter ===
414 +(% style="color:blue" %)**Add a topic filter:**
458 458  
459 -Uplink Converter
416 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
460 460  
461 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
418 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
462 462  
463 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
420 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
464 464  
465 -[[image:image-20230802112413-33.png]]
466 466  
423 +=== 3.6.2 Simulate with MQTT.fx ===
467 467  
468 -Downlink Converter
469 469  
470 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
426 +[[image:image-20230802112413-39.png]]
471 471  
472 -[[image:image-20230802112413-34.png]]
428 +[[image:image-20230802112413-40.png]]
473 473  
474 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
475 475  
476 -=== 1.1.3 MQTT Integration Setup ===
431 +=== 3.6.3 Configure NB-IoT Sensor ===
477 477  
478 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
479 479  
480 -[[image:image-20230802112413-35.png]]
434 +(% style="color:blue" %)**AT Commands**
481 481  
482 -* The next steps is to add the recently created uplink and downlink converters;
436 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
483 483  
484 -[[image:image-20230802112413-36.png]]
438 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
485 485  
486 -[[image:image-20230802112413-37.png]]
440 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
487 487  
488 -Add a topic filter:
442 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
489 489  
444 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
490 490  
491 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
446 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
492 492  
493 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
448 +Test Uplink by click the button for 1 second
494 494  
495 -[[image:image-20230802112413-38.png]]
450 +[[image:image-20230802112413-41.png]]
496 496  
497 -== 1.2 Simulate with MQTT.fx ==
452 +[[image:image-20230802112413-42.png]]
498 498  
499 -[[image:image-20230802112413-39.png]]
454 +[[image:image-20230802112413-43.png]]
500 500  
501 -[[image:image-20230802112413-40.png]]
502 502  
503 -== 1.3 Configure NB-IoT Sensor ==
457 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
504 504  
505 -AT Commands
459 +=== 3.7.1 Create device & Get Credentials ===
506 506  
507 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
508 508  
509 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
462 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
510 510  
511 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
464 +[[image:image-20230802112413-44.png]]
512 512  
466 +[[image:image-20230802112413-45.png]]
513 513  
514 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
515 515  
516 -CLIENT :“Any value”
469 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
517 517  
518 -User Name:“Any value”
471 +[[image:image-20230802112413-46.png]]
519 519  
520 -Password:“Any value”
521 521  
474 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
522 522  
523 -Test Uplink by click the button for 1 second
476 +(% style="color:blue" %)**On the Connection Profile window, set the following information:**
524 524  
525 -[[image:image-20230802112413-41.png]]
478 +* (% style="color:#037691" %)**Profile Name: “Any name”**
526 526  
527 -[[image:image-20230802112413-42.png]]
480 +* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
528 528  
529 -[[image:image-20230802112413-43.png]]
482 +* (% style="color:#037691" %)**Broker Port: 8883**
530 530  
484 +* (% style="color:#037691" %)**Client ID: “Any value”**
531 531  
532 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
486 +(% style="color:blue" %)**On the section User credentials, set the following information:**
533 533  
534 -== 5.1 Create device & Get Credentials ==
488 +* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
535 535  
536 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
490 +* (% style="color:#037691" %)**Password: “Your device token”**
537 537  
538 -[[image:image-20230802112413-44.png]]
492 +* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
539 539  
540 -[[image:image-20230802112413-45.png]]
494 +* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
541 541  
542 -= =
496 +(% style="color:blue" %)**AT command:**
543 543  
544 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
498 +* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
545 545  
546 -[[image:image-20230802112413-46.png]]
500 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
547 547  
502 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
548 548  
549 -On the Connection Profile window, set the following information: (这边加一个截图)
504 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
550 550  
551 -* Profile Name: “Any name”
552 -* Broker Address: mqtt.tago.io
553 -* Broker Port: 1883
554 -* Client ID: “Any value”
506 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
555 555  
556 -On the section User credentials, set the following information:(这边加一个截图)
508 +* (% style="color:#037691" %)**AT+PWD=“Your device token”**
557 557  
558 -* User Name: “Any value” Tago validates your user by the token only
559 -* Password: “Your device token”
560 -* PUBTOPIC: “Any value”
561 -* SUBTOPIC: “Any value”
510 +=== 3.7.2 Simulate with MQTT.fx ===
562 562  
563 -== 5.2 Simulate with MQTT.fx ==
564 564  
565 -[[image:image-20230802112413-47.png]]
513 +[[image:image-20230802112413-52.png]]
566 566  
567 -[[image:image-20230802112413-48.png]]
568 568  
569 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
516 +[[image:image-20230808105300-2.png]]
570 570  
571 -[[image:image-20230802112413-49.png]]
572 572  
573 -== 1.4. tago data ==
519 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
574 574  
521 +[[image:image-20230808105217-1.png]]
575 575  
523 +[[image:image-20230808105329-3.png]]
524 +
525 +
526 +=== 3.7.3 tago data ===
527 +
528 +
576 576  [[image:image-20230802112413-50.png]]
577 577  
578 -[[image:image-20230802112413-51.png]]
531 +[[image:image-20230802112413-51.png||height="184" width="696"]]
579 579  
580 -== 1.4. TLS mode ==
581 581  
582 -Users can choose to use SSL/TLS mode.
534 +== 3.8 TCP Connection ==
583 583  
584 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
585 585  
586 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
537 +(% style="color:blue" %)**AT command:**
587 587  
588 -* Profile Name: “Any name”
589 -* Broker Address: mqtt.tago.io
590 -* Broker Port: 8883
591 -* Client ID: “Any value”
592 -* User Name: “Any value” Tago validates your user by the token only
593 -* Password: “Your device token”
594 -* PUBTOPIC: “Any value”
595 -* SUBTOPIC: “Any value”
539 +* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
596 596  
597 -[[image:image-20230802112413-52.png]]
541 +* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
598 598  
543 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
599 599  
600 -
545 +(% style="color:blue" %)**Sensor Console Output when Uplink:**
546 +
547 +[[image:image-20230807233631-1.png]]
548 +
549 +
550 +(% style="color:blue" %)**See result in TCP Server:**
551 +
552 +[[image:image-20230807233631-2.png]]
image-20230807233631-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content