Skip to Content
Last modified by Mengting Qiu on 2025/07/03 18:55
From version 53.10
edited by Xiaoling
on 2023/08/02 12:04
Change comment: There is no comment for this version
To version 59.1
edited by Edwin Chen
on 2023/08/07 10:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -4,7 +4,6 @@
4 4  {{toc/}}
5 5  
6 6  
7 -
8 8  = 1. The use of this guideline =
9 9  
10 10  
... ... @@ -11,20 +11,29 @@
11 11  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
12 12  
13 13  
14 -= 2. Network Connection =
13 += 2. Attach Network =
15 15  
16 16  
17 -The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
16 +To attache NB-IoT sensors to NB-IoT Network, You need to:
18 18  
19 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 -|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 -|1NCE| | |
22 -|China Mobile| | |
18 +1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
19 +1. Insert the SIM card to Sensor
20 +1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (% class="mark" %)(补充 APN 指令(%%))
23 23  
24 -== 2.1 1NCE SIM Card. ==
22 +After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
25 25  
24 +The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
26 26  
26 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
27 +|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**APN**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
28 +|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
29 +**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
27 27  
31 +Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
32 +)))|(% style="width:135px" %)
33 +|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
34 +|(% style="width:117px" %)China Telecom|(% style="width:151px" %) |(% style="width:474px" %)China Mainland|(% style="width:135px" %)
35 +
28 28  = 3. Configure to connect to different servers =
29 29  
30 30  == 3.1 General UDP Connection ==
... ... @@ -105,9 +105,9 @@
105 105  [[image:image-20230802112413-7.png]]
106 106  
107 107  
108 -== 3.3.2 Simulate with MQTT.fx ==
116 +=== 3.3.2 Simulate with MQTT.fx ===
109 109  
110 -=== 3.3.2.1 Establish MQTT Connection ===
118 +==== 3.3.2.1 Establish MQTT Connection ====
111 111  
112 112  
113 113  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -124,14 +124,14 @@
124 124  
125 125  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
126 126  
135 +==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
127 127  
128 128  
129 -=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
130 -
131 131  [[image:image-20230802112413-9.png]]
132 132  
133 133  [[image:image-20230802112413-10.png]]
134 134  
142 +
135 135  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
136 136  
137 137  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
... ... @@ -146,30 +146,28 @@
146 146  [[image:image-20230802112413-11.png]]
147 147  
148 148  
149 -== 3.3 Configure NB-IoT Sensor for connection ==
157 +=== 3.3.3 Configure NB-IoT Sensor for connection ===
150 150  
151 -=== 3.3.1 AT Commands: ===
159 +==== 3.3.3.1 AT Commands: ====
152 152  
153 153  
154 154  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
155 155  
156 -* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
164 +* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
157 157  
158 -* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
166 +* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
159 159  
160 -* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
168 +* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
161 161  
162 -* **AT+PWD=<Your ThingSpeak MQTT Password>**
170 +* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
163 163  
164 -* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
172 +* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
165 165  
166 -* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
174 +* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
167 167  
176 +==== 3.3.3.2 Uplink Examples ====
168 168  
169 169  
170 -=== 3.3.2 Uplink Examples ===
171 -
172 -
173 173  For S31-NB
174 174  
175 175  For SE01-NB
... ... @@ -195,7 +195,7 @@
195 195  For SN50V3-NB
196 196  
197 197  
198 -=== 3.3.3 Map fields to sensor value ===
204 +==== 3.3.3.3 Map fields to sensor value ====
199 199  
200 200  
201 201  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
... ... @@ -208,387 +208,235 @@
208 208  
209 209  Below is the NB-IoT Product Table show the mapping.
210 210  
211 -|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
212 -Field9
217 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1386px" %)
218 +|(% style="background-color:#4f81bd; width:124px" %) |(% style="background-color:#4f81bd; color:white; width:91px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:159px" %)Field3|(% style="background-color:#4f81bd; color:white; width:153px" %)Field4|(% style="background-color:#4f81bd; color:white; width:152px" %)Field5|(% style="background-color:#4f81bd; color:white; width:148px" %)Field6|(% style="background-color:#4f81bd; color:white; width:164px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:66px" %)Field9|(% style="background-color:#4f81bd; color:white; width:66px" %)Field10
219 +|(% style="background-color:#4f81bd; color:white; width:124px" %)S31x-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
220 +|(% style="background-color:#4f81bd; color:white; width:124px" %)SE01-NB|(% style="width:91px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:159px" %)conduct|(% style="width:153px" %)dielectric_constant|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
221 +|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS20-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
222 +|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS45-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
223 +|(% style="background-color:#4f81bd; color:white; width:124px" %)DDS75-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
224 +|(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS120-NB|(% style="width:91px" %)distance|(% style="width:102px" %)Battery|(% style="width:159px" %)RSSI|(% style="width:153px" %) |(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
225 +|(% rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SPH01-NB|(% style="width:91px" %)ph|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
226 +|(% style="background-color:#4f81bd; color:white; width:124px" %)NLM01-NB|(% style="width:91px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
227 +|(% style="background-color:#4f81bd; color:white; width:124px" %)NMDS200-NB|(% style="width:91px" %)distance1|(% style="width:102px" %)distance2|(% style="width:159px" %)Battery|(% style="width:153px" %)RSSI|(% style="width:152px" %) |(% style="width:148px" %) |(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
228 +|(% style="background-color:#4f81bd; color:white; width:124px" %)CPN01-NB|(% style="width:91px" %)alarm|(% style="width:102px" %)count|(% style="width:159px" %)door open duration|(% style="width:153px" %)calc flag|(% style="width:152px" %)Battery|(% style="width:148px" %)RSSI|(% style="width:164px" %) |(% style="width:152px" %) |(% style="width:66px" %) |(% style="width:66px" %)
229 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:91px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:159px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:153px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:152px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:148px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:164px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:66px" %)Battery|(% colspan="1" rowspan="1" style="width:66px" %)RSSI
230 +|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:91px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:159px" %)RSSI|(% colspan="1" rowspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:148px" %)adc0|(% colspan="1" rowspan="1" style="width:164px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:66px" %) |(% colspan="1" rowspan="1" style="width:66px" %)
231 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod2|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc0|(% colspan="1" style="width:164px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
232 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod3|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:152px" %)exit_state/input PA4|(% colspan="1" style="width:148px" %)adc1|(% colspan="1" style="width:164px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:66px" %)adc4|(% colspan="1" style="width:66px" %)
233 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod4|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
234 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod5|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)DS18B20 Temp|(% colspan="1" style="width:152px" %)adc0|(% colspan="1" style="width:148px" %)exit_state/input PA4|(% colspan="1" style="width:164px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
235 +|(% colspan="1" style="background-color:#4f81bd; color:white; width:124px" %)SN50V3-NB mod6|(% colspan="1" style="width:91px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:159px" %)RSSI|(% colspan="1" style="width:153px" %)count|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:148px" %) |(% colspan="1" style="width:164px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:66px" %) |(% colspan="1" style="width:66px" %)
213 213  
214 -
215 -)))|(% colspan="1" rowspan="1" %)(((
216 -Field10
237 +== 3.4 Datacake ==
217 217  
218 -
219 -)))
220 -|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 -|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
222 -|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
223 -Battery
224 224  
225 -
226 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
227 -|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
228 -Battery
229 229  
230 -
231 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 -|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
233 -Battery
234 234  
235 -
236 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 -|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
238 -Battery
242 +== 3.5 Node-Red (via MQTT) ==
239 239  
240 -
241 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
242 -|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
243 -|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
244 -|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
245 -|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
246 -|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
247 -|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
248 -|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
249 -|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
250 -DS18B20 Temp
244 +=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
251 251  
252 -
253 -)))|(% colspan="1" rowspan="1" %)(((
254 -exit_state/input PA4
255 255  
256 -
257 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
258 -|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
259 -Battery
247 +[[image:image-20230802112413-29.png]]
260 260  
261 -
262 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
263 -exit_state/input PA4
264 264  
265 -
266 -)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
267 -|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
268 -Battery
250 +[[image:image-20230802112413-30.png]]
269 269  
270 -
271 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
272 -DS18B20 Temp
273 273  
274 -
275 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
276 -exit_state/input PA4
253 +=== 3.5.2 Simulate Connection ===
277 277  
278 -
279 -)))|(% colspan="1" rowspan="1" %)(((
280 -DS18B20 Temp2
281 281  
282 -
283 -)))|(% colspan="1" rowspan="1" %)(((
284 -DS18B20 Temp3
256 +[[image:image-20230802112413-31.png]]
285 285  
286 -
287 -)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
288 -|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
289 -Battery
290 290  
291 -
292 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
293 -DS18B20 Temp
259 +=== 3.5.3 Configure NB-IoT Sensors ===
294 294  
295 -
296 -)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
297 -exit_state/input PA4
298 298  
299 -
300 -)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
301 -|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
302 -Battery
262 +* (% style="color:blue" %)**AT+PRO=3,0(hex format) or 3,5(json format)**(%%)    ~/~/  Set to mqtt Server and  Payload
303 303  
304 -
305 -)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
264 +* (% style="color:blue" %)**AT+CLIENT=any value**
306 306  
307 -= 4. Datacake =
266 +* (% style="color:blue" %)**AT+UNAME=any value**
308 308  
309 -== 1.1 Define Product ==
268 +* (% style="color:blue" %)**AT+PWD=any value**
310 310  
311 -Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
270 +* (% style="color:blue" %)**AT+PUBTOPIC=any value**
312 312  
272 +* (% style="color:blue" %)**AT+SUBTOPIC=any value**
313 313  
314 -By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
274 +== 3.6 ThingsBoard.Cloud (via MQTT) ==
315 315  
316 -[[image:image-20230802112413-14.png]]
276 +=== 3.6.1 Configure ThingsBoard ===
317 317  
318 -== 1.2 Create Device ==
278 +==== 3.6.1.1 Create Device ====
319 319  
320 -In the second step you have to define the device which should be added to the product.
321 321  
322 -[[image:image-20230802112413-15.png]]
281 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
323 323  
324 -Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
283 +[[image:image-20230802112413-32.png]]
325 325  
326 326  
327 -== 1.3 Create Database Fields ==
286 +==== 3.6.1.2 Create Uplink & Downlink Converter ====
328 328  
329 -After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
330 330  
331 -You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
289 +(% style="color:blue" %)**Uplink Converter**
332 332  
333 -[[image:image-20230802112413-16.png]]
291 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
334 334  
335 -[[image:image-20230802112413-17.png]]
293 +To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
336 336  
337 -To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
295 +[[image:image-20230802112413-33.png||height="732" width="1302"]]
338 338  
339 -This will open another modal asking for some required input for your first field.
340 340  
341 -[[image:image-20230802112413-18.png]]
298 +(% style="color:blue" %)**Downlink Converter**
342 342  
343 -[[image:image-20230802112413-19.png]]
300 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
344 344  
345 -== 1.4 Set up Broker ==
302 +[[image:image-20230802112413-34.png||height="734" width="1305"]]
346 346  
347 -The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
304 +(% style="color:red" %)**Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
348 348  
349 -You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
350 350  
351 -View your Personal Access Token
307 +==== 3.6.1.3 MQTT Integration Setup ====
352 352  
353 -You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
354 354  
355 -[[image:image-20230802112413-20.png]]
310 +Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
356 356  
357 -MQTT Client-ID
312 +[[image:image-20230802112413-35.png||height="738" width="1312"]]
358 358  
359 -The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
360 360  
361 -AT+CLIENT=“Any value”
315 +* The next steps is to add the recently created uplink and downlink converters;
362 362  
363 -AT+UNAME=Token
317 +[[image:image-20230802112413-36.png||height="736" width="1308"]]
364 364  
365 -AT+PWD=Token
319 +[[image:image-20230802112413-37.png||height="735" width="1307"]]
366 366  
367 -[[image:image-20230802112413-21.png]]
368 368  
322 +(% style="color:blue" %)**Add a topic filter:**
369 369  
370 -== 1.6 Create your first Subscription ==
324 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
371 371  
372 -Subscribe
326 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
373 373  
374 -Data is published according to the following structure:
328 +[[image:image-20230802112413-38.png||height="731" width="1300"]]
375 375  
376 -dtck~/~//
377 377  
378 -Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
331 +=== 3.6.2 Simulate with MQTT.fx ===
379 379  
380 380  
381 -[[image:image-20230802112413-22.png]]
334 +[[image:image-20230802112413-39.png]]
382 382  
336 +[[image:image-20230802112413-40.png]]
383 383  
384 -[[image:image-20230802112413-23.png]]
385 385  
339 +=== 3.6.3 Configure NB-IoT Sensor ===
386 386  
387 -[[image:image-20230802112413-24.png]]
388 388  
342 +(% style="color:blue" %)**AT Commands**
389 389  
390 -example:
344 +* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
391 391  
392 -AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
346 +* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>** (%%)
347 +* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
348 +* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
349 +* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
350 +* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
393 393  
394 -[[image:image-20230802112413-25.png]]
352 +
395 395  
396 -== 1.7 Define Publish Topic ==
354 +Test Uplink by click the button for 1 second
397 397  
398 -Publish
356 +[[image:image-20230802112413-41.png]]
399 399  
400 -To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
358 +[[image:image-20230802112413-42.png]]
401 401  
402 -Due to the nature of MQTT, the topic prefix differs as follows:
360 +[[image:image-20230802112413-43.png]]
403 403  
404 -dtck-pub~/~//
405 405  
406 -example:
363 +== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
407 407  
408 -AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
365 +=== 3.7.1 Create device & Get Credentials ===
409 409  
410 -== 1.8 upload data ==
411 411  
412 -[[image:image-20230802112413-26.png]]
368 +We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
413 413  
414 -[[image:image-20230802112413-27.png]]
370 +[[image:image-20230802112413-44.png]]
415 415  
416 -[[image:image-20230802112413-28.png]]
372 +[[image:image-20230802112413-45.png]]
417 417  
418 -= =
419 419  
420 -= 5. Node-Red (via MQTT) =
375 +Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
421 421  
377 +[[image:image-20230802112413-46.png]]
422 422  
423 -== 1.1 Configure Node-Red ==
424 424  
425 -[[image:image-20230802112413-29.png]]
380 +On the Connection Profile window, set the following information: **(这边加一个截图)**
426 426  
427 -[[image:image-20230802112413-30.png]]
382 +* (% style="color:blue" %)**Profile Name: “Any name”**
428 428  
429 -== 1.2 Simulate Connection ==
384 +* (% style="color:blue" %)**Broker Address: mqtt.tago.io**
430 430  
431 -[[image:image-20230802112413-31.png]]
386 +* (% style="color:blue" %)**Broker Port: 1883**
432 432  
433 -== 1.3 Configure NB-IoT Sensors ==
388 +* (% style="color:blue" %)**Client ID: “Any value”**
434 434  
435 -* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
436 -* AT+CLIENT=any value
437 -* AT+UNAME=any value
438 -* AT+PWD=any value
439 -* AT+PUBTOPIC=any value
440 -* AT+SUBTOPIC=any value
390 +On the section User credentials, set the following information: **(这边加一个截图)**
441 441  
442 -= 6. ThingsBoard.Cloud (via MQTT) =
392 +* (% style="color:blue" %)**User Name: “Any value”**  (%%) ~/~/  Tago validates your user by the token only
443 443  
444 -== 1.1 Configure ThingsBoard ==
394 +* (% style="color:blue" %)**Password: “Your device token”**
445 445  
446 -=== 1.1.1 Create Device ===
396 +* (% style="color:blue" %)**PUBTOPIC: “Any value”**
447 447  
448 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
398 +* (% style="color:blue" %)**SUBTOPIC: “Any value”**
449 449  
450 -[[image:image-20230802112413-32.png]]
400 +=== 3.7.2 Simulate with MQTT.fx ===
451 451  
452 -=== 1.1.2 Create Uplink & Downlink Converter ===
453 453  
454 -Uplink Converter
403 +[[image:image-20230802112413-47.png]]
455 455  
456 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
405 +[[image:image-20230802112413-48.png]]
457 457  
458 -To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
407 +Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
459 459  
460 -[[image:image-20230802112413-33.png]]
461 461  
410 +[[image:image-20230802112413-49.png]]
462 462  
463 -Downlink Converter
464 464  
465 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
413 +=== 3.7.3 tago data ===
466 466  
467 -[[image:image-20230802112413-34.png]]
468 468  
469 -Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
416 +[[image:image-20230802112413-50.png]]
470 470  
471 -=== 1.1.3 MQTT Integration Setup ===
418 +[[image:image-20230802112413-51.png||height="184" width="696"]]
472 472  
473 -Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
474 474  
475 -[[image:image-20230802112413-35.png]]
421 +=== 3.7.4 TLS mode ===
476 476  
477 -* The next steps is to add the recently created uplink and downlink converters;
478 478  
479 -[[image:image-20230802112413-36.png]]
424 +Users can choose to use (% style="color:blue" %)**SSL/TLS**(%%) mode.
480 480  
481 -[[image:image-20230802112413-37.png]]
426 +On the SSL/TLS section, check the option **Enable SSL/TLS**, and click OK.
482 482  
483 -Add a topic filter:
428 +The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
484 484  
430 +* (% style="color:blue" %)**Profile Name: “Any name”**
485 485  
486 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
432 +* (% style="color:blue" %)**Broker Address: mqtt.tago.io**
487 487  
488 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
434 +* (% style="color:blue" %)**Broker Port: 8883**
489 489  
490 -[[image:image-20230802112413-38.png]]
436 +* (% style="color:blue" %)**Client ID: “Any value”**
491 491  
492 -== 1.2 Simulate with MQTT.fx ==
438 +* (% style="color:blue" %)**User Name: “Any value”** (%%) ~/~/ Tago validates your user by the token only
493 493  
494 -[[image:image-20230802112413-39.png]]
440 +* (% style="color:blue" %)**Password: “Your device token”**
495 495  
496 -[[image:image-20230802112413-40.png]]
442 +* (% style="color:blue" %)**PUBTOPIC: “Any value”**
497 497  
498 -== 1.3 Configure NB-IoT Sensor ==
444 +* (% style="color:blue" %)**SUBTOPIC: “Any value”**
499 499  
500 -AT Commands
501 -
502 -AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
503 -
504 -AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
505 -
506 -AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
507 -
508 -
509 -Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
510 -
511 -CLIENT :“Any value”
512 -
513 -User Name:“Any value”
514 -
515 -Password:“Any value”
516 -
517 -
518 -Test Uplink by click the button for 1 second
519 -
520 -[[image:image-20230802112413-41.png]]
521 -
522 -[[image:image-20230802112413-42.png]]
523 -
524 -[[image:image-20230802112413-43.png]]
525 -
526 -
527 -= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
528 -
529 -== 5.1 Create device & Get Credentials ==
530 -
531 -We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
532 -
533 -[[image:image-20230802112413-44.png]]
534 -
535 -[[image:image-20230802112413-45.png]]
536 -
537 -= =
538 -
539 -Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
540 -
541 -[[image:image-20230802112413-46.png]]
542 -
543 -
544 -On the Connection Profile window, set the following information: (这边加一个截图)
545 -
546 -* Profile Name: “Any name”
547 -* Broker Address: mqtt.tago.io
548 -* Broker Port: 1883
549 -* Client ID: “Any value”
550 -
551 -On the section User credentials, set the following information:(这边加一个截图)
552 -
553 -* User Name: “Any value” Tago validates your user by the token only
554 -* Password: “Your device token”
555 -* PUBTOPIC: “Any value”
556 -* SUBTOPIC: “Any value”
557 -
558 -== 5.2 Simulate with MQTT.fx ==
559 -
560 -[[image:image-20230802112413-47.png]]
561 -
562 -[[image:image-20230802112413-48.png]]
563 -
564 -Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
565 -
566 -[[image:image-20230802112413-49.png]]
567 -
568 -== 1.4. tago data ==
569 -
570 -
571 -[[image:image-20230802112413-50.png]]
572 -
573 -[[image:image-20230802112413-51.png]]
574 -
575 -== 1.4. TLS mode ==
576 -
577 -Users can choose to use SSL/TLS mode.
578 -
579 -On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
580 -
581 -The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
582 -
583 -* Profile Name: “Any name”
584 -* Broker Address: mqtt.tago.io
585 -* Broker Port: 8883
586 -* Client ID: “Any value”
587 -* User Name: “Any value” Tago validates your user by the token only
588 -* Password: “Your device token”
589 -* PUBTOPIC: “Any value”
590 -* SUBTOPIC: “Any value”
591 -
592 592  [[image:image-20230802112413-52.png]]
593 593  
594 594