Changes for page General Configure/Commands to Connect to IoT server for -NB & -NS NB-IoT models

Last modified by Kilight Cao on 2025/07/23 16:27

From 53.9 to 53.10 From 104.1 to 104.2

From version 53.10

edited by Xiaoling
on 2023/08/02 12:04

Change comment: There is no comment for this version

To version 104.1

edited by Edwin Chen
on 2023/10/02 18:30

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 28 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Xiaoling
++XWiki.Edwin

Content

@@ -1,4 +1,4 @@
--(% class="wikigeneratedid" %)
++(% class="wikigeneratedid" id="HTableofContents:" %)
  **Table of Contents:**
  {{toc/}}
@@ -5,6 +5,9 @@
++
++
++
  = 1. The use of this guideline =
@@ -11,20 +11,47 @@
  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
--= 2. Network Connection =
++= 2. Attach Network =
++== 2.1 General Configure to attach network ==
++To attache NB-IoT sensors to NB-IoT Network, You need to:
++
++1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
++1. Insert the SIM card to Sensor
++1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
++
++[[image:image-20230808205045-1.png||height="293" width="438"]]
++
++After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
++
  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
--|1NCE| | |
--|China Mobile| | |
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
++|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
++|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
++**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
--== 2.1 1NCE SIM Card. ==
++Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
++)))|(% style="width:135px" %)
++|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
++|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
++(% class="wikigeneratedid" %)
++==   ==
++== 2.2 Speed Up Network Attach time ==
++BC660K-GL supports multi bands (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85. **(%%) It will search one by one and try to attach, this will take a lot of time and even cause attach fail. User can lock the band to specify band for its operator to make this faster.
++
++**AT+QBAND?** ~/~/ Check what is the current used frequency band
++
++**AT+QBAND=1,4** ~/~/ Set to use 1 frequency band. Band4
++
++**AT+QBAND=2,8,20** ~/~/ Set to use 2 frequency bands. Band 8 and Band 20
++
++
++
  = 3. Configure to connect to different servers =
  == 3.1 General UDP Connection ==
@@ -88,7 +88,7 @@
  [[image:image-20230802112413-4.png]]
--[[image:image-20230802112413-5.png]]
++[[image:image-20230802112413-5.png||height="530" width="987"]]
  (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
@@ -100,14 +100,14 @@
  [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
--[[image:image-20230802112413-6.png]]
++[[image:image-20230802112413-6.png||height="336" width="925"]]
  [[image:image-20230802112413-7.png]]
--== 3.3.2 Simulate with MQTT.fx ==
++=== 3.3.2 Simulate with MQTT.fx ===
--=== 3.3.2.1 Establish MQTT Connection ===
++==== 3.3.2.1 Establish MQTT Connection ====
  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
@@ -124,14 +124,14 @@
  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
++==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
--=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
--
  [[image:image-20230802112413-9.png]]
  [[image:image-20230802112413-10.png]]
++
  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
@@ -143,35 +143,32 @@
  (% style="color:blue" %)**Result: **
--[[image:image-20230802112413-11.png]]
++[[image:image-20230802112413-11.png||height="539" width="901"]]
--== 3.3 Configure NB-IoT Sensor for connection ==
++=== 3.3.3 Configure NB-IoT Sensor for connection ===
--=== 3.3.1 AT Commands: ===
++==== 3.3.3.1 AT Commands: ====
  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
--* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
++* (% style="color:blue" %)**AT+PRO=3,1** (%%)    ~/~/ Set to use ThingSpeak Server and Related Payload
--* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
++* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
--* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
++* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
--* **AT+PWD=<Your ThingSpeak MQTT Password>**
++* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
--* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
++* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
--* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
++* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
++==== 3.3.3.2 Uplink Examples ====
++[[image:image-20230816201942-1.png]]
--=== 3.3.2 Uplink Examples ===
--
--
--For S31-NB
--
  For SE01-NB
  For DDS20-NB
@@ -195,401 +195,336 @@
  For SN50V3-NB
--=== 3.3.3 Map fields to sensor value ===
++==== 3.3.3.3 Map fields to sensor value ====
  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
--[[image:image-20230802112413-12.png]]
++[[image:image-20230802112413-12.png||height="504" width="1011"]]
--[[image:image-20230802112413-13.png]]
++[[image:image-20230802112413-13.png||height="331" width="978"]]
  Below is the NB-IoT Product Table show the mapping.
--|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
--Field9
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
++|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
++|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
++|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
++|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
++|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
++|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
++|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
++|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
++|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
--
--)))|(% colspan="1" rowspan="1" %)(((
--Field10
++== 3.4 [[Datacake>>https://datacake.co/]] ==
--
--)))
--|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
--Battery
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
--Battery
++(% class="wikigeneratedid" %)
++Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
--Battery
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
--Battery
++(% class="wikigeneratedid" %)
++As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
--|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
--DS18B20 Temp
++* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
--
--)))|(% colspan="1" rowspan="1" %)(((
--exit_state/input PA4
++* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
--
--)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
--Battery
++=== 3.4.1 Create device ===
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
--exit_state/input PA4
--
--)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
--Battery
++(% style="color:blue" %)**Add Device**(%%) in DataCake.
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
--DS18B20 Temp
++[[image:image-20230808162301-1.png||height="473" width="994"]]
--
--)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
--exit_state/input PA4
--
--)))|(% colspan="1" rowspan="1" %)(((
--DS18B20 Temp2
++[[image:image-20230808162342-2.png]]
--
--)))|(% colspan="1" rowspan="1" %)(((
--DS18B20 Temp3
--
--)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
--Battery
++(% style="color:blue" %)**Choose the correct model**(%%) from template.
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
--DS18B20 Temp
++[[image:image-20230808162421-3.png]]
--
--)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
--exit_state/input PA4
--
--)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
--|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
--Battery
++(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
--
--)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
++[[image:image-20230808163612-7.png]]
--= 4. Datacake =
++[[image:image-20230808163035-5.png]]
--== 1.1 Define Product ==
++[[image:image-20230808163049-6.png]]
--Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
++=== 3.4.2 Scan QR code to obtain data ===
--By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
--[[image:image-20230802112413-14.png]]
++Users can use their phones or computers to scan QR codes to obtain device data information.
--== 1.2 Create Device ==
++[[image:image-20230808170051-8.png||height="255" width="259"]]
--In the second step you have to define the device which should be added to the product.
++[[image:image-20230808170548-9.png]]
--[[image:image-20230802112413-15.png]]
--Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
++=== 3.4.2 AT command for connecting to DataCake ===
--== 1.3 Create Database Fields ==
++(% style="color:blue" %)**AT+PRO=2,0**
--After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
++(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
--You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
--[[image:image-20230802112413-16.png]]
++== 3.5 Node-Red (via MQTT) ==
--[[image:image-20230802112413-17.png]]
++=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
--To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
--This will open another modal asking for some required input for your first field.
++Take S31-NB UDP protocol as an example.
--[[image:image-20230802112413-18.png]]
++Dragino provides input flow examples for the sensors.
--[[image:image-20230802112413-19.png]]
++User can download the required JSON file through Dragino Node-RED input flow template.
--== 1.4 Set up Broker ==
++Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
--The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
++We can directly import the template.
--You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
++The templates for S31-NB and NB95S31B are the same.
--View your Personal Access Token
--You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
++[[image:image-20230809173127-4.png]]
--[[image:image-20230802112413-20.png]]
--MQTT Client-ID
++Please select the NB95S31B template.
--The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
++[[image:image-20230809173310-5.png]]
--AT+CLIENT=“Any value”
++[[image:image-20230809173438-6.png]]
--AT+UNAME=Token
++[[image:image-20230809173800-7.png]]
--AT+PWD=Token
--[[image:image-20230802112413-21.png]]
++Successfully imported template.
++[[image:image-20230809173835-8.png]]
--== 1.6 Create your first Subscription ==
--Subscribe
++Users can set UDP port.
--Data is published according to the following structure:
++[[image:image-20230809174053-9.png]]
--dtck~/~//
--Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
++=== 3.5.2 Simulate Connection ===
--[[image:image-20230802112413-22.png]]
++We have completed the configuration of UDP. We can try sending packets to node red.
++[[image:image-20230810083934-1.png]]
--[[image:image-20230802112413-23.png]]
++[[image:image-20230810084048-2.png]]
++=== 3.5.3 Configure NB-IoT Sensors ===
--[[image:image-20230802112413-24.png]]
++* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)**    **~/~/  Set to UDP Server and  Payload
--example:
++* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)**                        **~/~/  Set Server IP and  port
--AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
++== 3.6 ThingsBoard.Cloud (via MQTT) ==
--[[image:image-20230802112413-25.png]]
++=== 3.6.1 Configure ThingsBoard ===
--== 1.7 Define Publish Topic ==
++==== 3.6.1.1 Create Device ====
--Publish
--To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
++Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
--Due to the nature of MQTT, the topic prefix differs as follows:
++[[image:image-20230802112413-32.png]]
--dtck-pub~/~//
--example:
++==== 3.6.1.2 Create Uplink & Downlink Converter ====
--AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
--== 1.8 upload data ==
++(% style="color:blue" %)**Uplink Converter**
--[[image:image-20230802112413-26.png]]
++The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
--[[image:image-20230802112413-27.png]]
++To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
--[[image:image-20230802112413-28.png]]
++[[image:image-20230802112413-33.png||height="732" width="1302"]]
--=   =
--= 5. Node-Red (via MQTT) =
++(% style="color:blue" %)**Downlink Converter**
++The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
--== 1.1 Configure Node-Red ==
++[[image:image-20230802112413-34.png||height="734" width="1305"]]
--[[image:image-20230802112413-29.png]]
++(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
--[[image:image-20230802112413-30.png]]
--== 1.2 Simulate Connection ==
++==== 3.6.1.3 MQTT Integration Setup ====
--[[image:image-20230802112413-31.png]]
--== 1.3 Configure NB-IoT Sensors ==
++Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
--* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
--* AT+CLIENT=any value
--* AT+UNAME=any value
--* AT+PWD=any value
--* AT+PUBTOPIC=any value
--* AT+SUBTOPIC=any value
++[[image:image-20230802112413-35.png||height="738" width="1312"]]
--= 6. ThingsBoard.Cloud (via MQTT) =
--== 1.1 Configure ThingsBoard ==
++* The next steps is to add the recently created uplink and downlink converters;
--=== 1.1.1 Create Device ===
++[[image:image-20230802112413-36.png||height="736" width="1308"]]
--Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
++[[image:image-20230802112413-37.png||height="735" width="1307"]]
--[[image:image-20230802112413-32.png]]
--=== 1.1.2 Create Uplink & Downlink Converter ===
++(% style="color:blue" %)**Add a topic filter:**
--Uplink Converter
++tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
--The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
++You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
--To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
++[[image:image-20230802112413-38.png||height="731" width="1300"]]
--[[image:image-20230802112413-33.png]]
++=== 3.6.2 Simulate with MQTT.fx ===
--Downlink Converter
--The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
++[[image:image-20230802112413-39.png]]
--[[image:image-20230802112413-34.png]]
++[[image:image-20230802112413-40.png]]
--Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
--=== 1.1.3 MQTT Integration Setup ===
++=== 3.6.3 Configure NB-IoT Sensor ===
--Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
--[[image:image-20230802112413-35.png]]
++(% style="color:blue" %)**AT Commands**
--* The next steps is to add the recently created uplink and downlink converters;
++* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)**  **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
--[[image:image-20230802112413-36.png]]
++* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
--[[image:image-20230802112413-37.png]]
++* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
--Add a topic filter:
++* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
++* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
--tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
++* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
--You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
++Test Uplink by click the button for 1 second
--[[image:image-20230802112413-38.png]]
++[[image:image-20230802112413-41.png]]
--== 1.2 Simulate with MQTT.fx ==
++[[image:image-20230802112413-42.png]]
--[[image:image-20230802112413-39.png]]
++[[image:image-20230802112413-43.png]]
--[[image:image-20230802112413-40.png]]
--== 1.3 Configure NB-IoT Sensor ==
++== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
--AT Commands
++=== 3.7.1 Create device & Get Credentials ===
--AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
--AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
++We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
--AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
++[[image:image-20230802112413-44.png]]
++[[image:image-20230802112413-45.png]]
--Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
--CLIENT :“Any value”
++Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
--User Name:“Any value”
++[[image:image-20230802112413-46.png]]
--Password:“Any value”
++The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
--Test Uplink by click the button for 1 second
++(% style="color:blue" %)**On the Connection Profile window, set the following information:**
--[[image:image-20230802112413-41.png]]
++* (% style="color:#037691" %)**Profile Name: “Any name”**
--[[image:image-20230802112413-42.png]]
++* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
--[[image:image-20230802112413-43.png]]
++* (% style="color:#037691" %)**Broker Port: 8883**
++* (% style="color:#037691" %)**Client ID: “Any value”**
--= 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
++(% style="color:blue" %)**On the section User credentials, set the following information:**
--== 5.1 Create device & Get Credentials ==
++* (% style="color:#037691" %)**User Name: “Any value”** (%%)      **~/~/ Tago validates your user by the token only**
--We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
++* (% style="color:#037691" %)**Password: “Your device token”**
--[[image:image-20230802112413-44.png]]
++* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
--[[image:image-20230802112413-45.png]]
++* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
--=   =
++(% style="color:blue" %)**AT command:**
--Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
++* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%)   **~/~/ hex format or json format**
--[[image:image-20230802112413-46.png]]
++* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
++* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
--On the Connection Profile window, set the following information: (这边加一个截图)
++* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
--* Profile Name: “Any name”
--* Broker Address: mqtt.tago.io
--* Broker Port: 1883
--* Client ID: “Any value”
++* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
--On the section User credentials, set the following information:(这边加一个截图)
++* (% style="color:#037691" %)**AT+PWD=“Your device token”**
--* User Name: “Any value” Tago validates your user by the token only
--* Password: “Your device token”
--* PUBTOPIC: “Any value”
--* SUBTOPIC: “Any value”
++=== 3.7.2 Simulate with MQTT.fx ===
--== 5.2 Simulate with MQTT.fx ==
--[[image:image-20230802112413-47.png]]
++[[image:image-20230802112413-52.png]]
--[[image:image-20230802112413-48.png]]
--Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
++[[image:image-20230808105300-2.png]]
--[[image:image-20230802112413-49.png]]
--== 1.4. tago data ==
++Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
++[[image:image-20230808105217-1.png]]
++[[image:image-20230808105329-3.png]]
++
++
++=== 3.7.3 tago data ===
++
++
  [[image:image-20230802112413-50.png]]
--[[image:image-20230802112413-51.png]]
++[[image:image-20230802112413-51.png||height="184" width="696"]]
--== 1.4. TLS mode ==
--Users can choose to use SSL/TLS mode.
++== 3.8 TCP Connection ==
--On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
--The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
++(% style="color:blue" %)**AT command:**
--* Profile Name: “Any name”
--* Broker Address: mqtt.tago.io
--* Broker Port: 8883
--* Client ID: “Any value”
--* User Name: “Any value” Tago validates your user by the token only
--* Password: “Your device token”
--* PUBTOPIC: “Any value”
--* SUBTOPIC: “Any value”
++* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
--[[image:image-20230802112413-52.png]]
++* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
++* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 **  (%%) ~/~/ to set TCP server address and port
--
++(% style="color:blue" %)**Sensor Console Output when Uplink:**
++
++[[image:image-20230807233631-1.png]]
++
++
++(% style="color:blue" %)**See result in TCP Server:**
++
++[[image:image-20230807233631-2.png]]

image-20230807233631-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.9 KB

Content

image-20230807233631-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.6 KB

Content

image-20230808105217-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+68.5 KB

Content

image-20230808105300-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+70.1 KB

Content

image-20230808105329-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.1 KB

Content

image-20230808162301-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+76.9 KB

Content

image-20230808162342-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+63.8 KB

Content

image-20230808162421-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+59.2 KB

Content

image-20230808162727-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+54.2 KB

Content

image-20230808163035-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+71.6 KB

Content

image-20230808163049-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+61.5 KB

Content

image-20230808163612-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.4 KB

Content

image-20230808170051-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.5 KB

Content

image-20230808170548-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+54.1 KB

Content

image-20230808205045-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+373.9 KB

Content

image-20230809165928-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+74.4 KB

Content

image-20230809170225-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.9 KB

Content

image-20230809170532-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+38.7 KB

Content

image-20230809173127-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+82.5 KB

Content

image-20230809173310-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.9 KB

Content

image-20230809173438-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+41.0 KB

Content

image-20230809173800-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+46.8 KB

Content

image-20230809173835-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+88.8 KB

Content

image-20230809174053-9.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.0 KB

Content

image-20230809180523-10.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+91.9 KB

Content

image-20230810083934-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.1 KB

Content

image-20230810084048-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.David

Size

...	...	@@ -1,0 +1,1 @@
	1	+63.7 KB

Content

image-20230816201942-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+99.8 KB

Content

Changes for page General Configure/Commands to Connect to IoT server for -NB & -NS NB-IoT models

Summary

Details

Applications

Navigation