Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 105.2
edited by Xiaoling
on 2023/11/06 16:16
Change comment: There is no comment for this version
To version 53.10
edited by Xiaoling
on 2023/08/02 12:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="wikigeneratedid" id="HTableofContents:" %)
1 +(% class="wikigeneratedid" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
... ... @@ -5,9 +5,6 @@
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 11  = 1. The use of this guideline =
12 12  
13 13  
... ... @@ -14,50 +14,20 @@
14 14  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
15 15  
16 16  
17 -= 2. Attach Network =
14 += 2. Network Connection =
18 18  
19 -== 2.1 General Configure to attach network ==
20 20  
21 -
22 -To attache NB-IoT sensors to NB-IoT Network, You need to:
23 -
24 -1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
25 -1. Insert the SIM card to Sensor
26 -1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
27 -
28 -[[image:image-20230808205045-1.png||height="293" width="438"]]
29 -
30 -After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
31 -
32 32  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
33 33  
34 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
35 -|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
36 -|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
37 -**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
19 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 +|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 +|1NCE| | |
22 +|China Mobile| | |
38 38  
39 -Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
40 -)))|(% style="width:135px" %)
41 -|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
42 -|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
24 +== 2.1 1NCE SIM Card. ==
43 43  
44 44  
45 45  
46 -== 2.2 Speed Up Network Attach time ==
47 -
48 -
49 -BC660K-GL supports multi bands (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85. **(%%) It will search one by one and try to attach, this will take a lot of time and even cause attach fail. User can lock the band to specify band for its operator to make this faster.
50 -
51 -(% style="color:#037691" %)**AT+QBAND?       ** (%%) ~/~/ Check what is the current used frequency band
52 -
53 -(% style="color:#037691" %)**AT+QBAND=1,4    ** (%%) ~/~/ Set to use 1 frequency band. Band4
54 -
55 -(% style="color:#037691" %)**AT+QBAND=2,8,20**  (%%) ~/~/ Set to use 2 frequency bands. Band 8 and Band 20
56 -
57 -
58 -See bands used for different provider:** [[NB-IoT Deployment , Bands, Operator list>>http://wiki.dragino.com/xwiki/bin/view/Main/NB-IoT%20Deployment%20%2C%20Bands%2C%20Operator%20list/]]**
59 -
60 -
61 61  = 3. Configure to connect to different servers =
62 62  
63 63  == 3.1 General UDP Connection ==
... ... @@ -71,7 +71,7 @@
71 71  
72 72  We can use PC tool to simulate UDP connection to make sure server works ok.
73 73  
74 -[[image:image-20230802112413-1.png||height="468" width="1024"]]
41 +[[image:image-20230802112413-1.png]]
75 75  
76 76  
77 77  === 3.1.2 Configure NB-IoT Sensor ===
... ... @@ -121,7 +121,7 @@
121 121  
122 122  [[image:image-20230802112413-4.png]]
123 123  
124 -[[image:image-20230802112413-5.png||height="530" width="987"]]
91 +[[image:image-20230802112413-5.png]]
125 125  
126 126  (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
127 127  
... ... @@ -133,14 +133,14 @@
133 133  
134 134  [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
135 135  
136 -[[image:image-20230802112413-6.png||height="336" width="925"]]
103 +[[image:image-20230802112413-6.png]]
137 137  
138 138  [[image:image-20230802112413-7.png]]
139 139  
140 140  
141 -=== 3.3.2 Simulate with MQTT.fx ===
108 +== 3.3.2 Simulate with MQTT.fx ==
142 142  
143 -==== 3.3.2.1 Establish MQTT Connection ====
110 +=== 3.3.2.1 Establish MQTT Connection ===
144 144  
145 145  
146 146  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -159,14 +159,12 @@
159 159  
160 160  
161 161  
162 -==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
129 +=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
163 163  
164 -
165 165  [[image:image-20230802112413-9.png]]
166 166  
167 167  [[image:image-20230802112413-10.png]]
168 168  
169 -
170 170  (% style="color:blue" %)**In MQTT.fx, we can publish below info:**
171 171  
172 172  * (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
... ... @@ -178,34 +178,34 @@
178 178  
179 179  (% style="color:blue" %)**Result: **
180 180  
181 -[[image:image-20230802112413-11.png||height="539" width="901"]]
146 +[[image:image-20230802112413-11.png]]
182 182  
183 183  
184 -=== 3.3.3 Configure NB-IoT Sensor for connection ===
149 +== 3.3 Configure NB-IoT Sensor for connection ==
185 185  
186 -==== 3.3.3.1 AT Commands: ====
151 +=== 3.3.1 AT Commands: ===
187 187  
188 188  
189 189  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
190 190  
191 -* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
156 +* **AT+PRO=3,1**   ~/~/ Set to use ThingSpeak Server and Related Payload
192 192  
193 -* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
158 +* **AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
194 194  
195 -* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
160 +* **AT+UNAME=<Your ThingSpeak MQTT User Name>**
196 196  
197 -* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
162 +* **AT+PWD=<Your ThingSpeak MQTT Password>**
198 198  
199 -* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
164 +* **AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
200 200  
201 -* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
166 +* **AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
202 202  
203 203  
204 204  
205 -==== 3.3.3.2 Uplink Examples ====
170 +=== 3.3.2 Uplink Examples ===
206 206  
207 207  
208 -[[image:image-20230816201942-1.png]]
173 +For S31-NB
209 209  
210 210  For SE01-NB
211 211  
... ... @@ -230,255 +230,339 @@
230 230  For SN50V3-NB
231 231  
232 232  
233 -==== 3.3.3.3 Map fields to sensor value ====
198 +=== 3.3.3 Map fields to sensor value ===
234 234  
235 235  
236 236  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
237 237  
238 238  
239 -[[image:image-20230802112413-12.png||height="504" width="1011"]]
204 +[[image:image-20230802112413-12.png]]
240 240  
241 -[[image:image-20230802112413-13.png||height="331" width="978"]]
206 +[[image:image-20230802112413-13.png]]
242 242  
243 243  
244 244  Below is the NB-IoT Product Table show the mapping.
245 245  
246 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
247 -|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
248 -|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
249 -|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
250 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
251 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
252 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
253 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
254 -|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
255 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
256 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
257 -|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
258 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
259 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
260 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
261 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
262 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
263 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
264 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
211 +|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
212 +Field9
265 265  
214 +
215 +)))|(% colspan="1" rowspan="1" %)(((
216 +Field10
266 266  
218 +
219 +)))
220 +|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 +|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
222 +|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
223 +Battery
267 267  
268 -== 3.4 [[Datacake>>https://datacake.co/]] ==
225 +
226 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
227 +|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
228 +Battery
269 269  
230 +
231 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 +|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
233 +Battery
270 270  
271 -(% class="wikigeneratedid" %)
272 -Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
235 +
236 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 +|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
238 +Battery
273 273  
240 +
241 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
242 +|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
243 +|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
244 +|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
245 +|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
246 +|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
247 +|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
248 +|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
249 +|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
250 +DS18B20 Temp
274 274  
275 -(% class="wikigeneratedid" %)
276 -As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**
252 +
253 +)))|(% colspan="1" rowspan="1" %)(((
254 +exit_state/input PA4
277 277  
278 -* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
256 +
257 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
258 +|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
259 +Battery
279 279  
280 -* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
261 +
262 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
263 +exit_state/input PA4
281 281  
265 +
266 +)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
267 +|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
268 +Battery
282 282  
270 +
271 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
272 +DS18B20 Temp
283 283  
284 -=== 3.4.1 Create device ===
274 +
275 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
276 +exit_state/input PA4
285 285  
278 +
279 +)))|(% colspan="1" rowspan="1" %)(((
280 +DS18B20 Temp2
286 286  
287 -(% style="color:blue" %)**Add Device**(%%) in DataCake.
282 +
283 +)))|(% colspan="1" rowspan="1" %)(((
284 +DS18B20 Temp3
288 288  
289 -[[image:image-20230808162301-1.png||height="453" width="952"]]
286 +
287 +)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
288 +|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
289 +Battery
290 290  
291 +
292 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
293 +DS18B20 Temp
291 291  
292 -[[image:image-20230808162342-2.png||height="541" width="952"]]
295 +
296 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
297 +exit_state/input PA4
293 293  
299 +
300 +)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
301 +|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
302 +Battery
294 294  
295 -(% style="color:blue" %)**Choose the correct model**(%%) from template.
304 +
305 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
296 296  
297 -[[image:image-20230808162421-3.png]]
307 += 4. Datacake =
298 298  
309 +== 1.1 Define Product ==
299 299  
300 -(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
311 +Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
301 301  
302 -[[image:image-20230808163612-7.png||height="549" width="952"]]
303 303  
304 -[[image:image-20230808163035-5.png]]
314 +By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
305 305  
306 -[[image:image-20230808163049-6.png||height="544" width="926"]]
316 +[[image:image-20230802112413-14.png]]
307 307  
318 +== 1.2 Create Device ==
308 308  
309 -=== 3.4.2 Scan QR code to obtain data ===
320 +In the second step you have to define the device which should be added to the product.
310 310  
322 +[[image:image-20230802112413-15.png]]
311 311  
312 -Users can use their phones or computers to scan QR codes to obtain device data information.
324 +Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
313 313  
314 -[[image:image-20230808170051-8.png||height="255" width="259"]]
315 315  
316 -[[image:image-20230808170548-9.png]]
327 +== 1.3 Create Database Fields ==
317 317  
329 +After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
318 318  
319 -=== 3.4.2 AT command for connecting to DataCake ===
331 +You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
320 320  
333 +[[image:image-20230802112413-16.png]]
321 321  
322 -(% style="color:blue" %)**AT+PRO=2,0**
335 +[[image:image-20230802112413-17.png]]
323 323  
324 -(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
337 +To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
325 325  
339 +This will open another modal asking for some required input for your first field.
326 326  
327 -== 3.5 Node-Red (via MQTT) ==
341 +[[image:image-20230802112413-18.png]]
328 328  
329 -=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
343 +[[image:image-20230802112413-19.png]]
330 330  
345 +== 1.4 Set up Broker ==
331 331  
332 -Take S31-NB UDP protocol as an example.
347 +The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
333 333  
334 -Dragino provides input flow examples for the sensors.
349 +You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
335 335  
336 -User can download the required JSON file through Dragino Node-RED input flow template.
351 +View your Personal Access Token
337 337  
338 -Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
353 +You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
339 339  
340 -We can directly import the template.
355 +[[image:image-20230802112413-20.png]]
341 341  
342 -The templates for S31-NB and NB95S31B are the same.
357 +MQTT Client-ID
343 343  
359 +The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
344 344  
345 -[[image:image-20230809173127-4.png]]
361 +AT+CLIENT=“Any value”
346 346  
363 +AT+UNAME=Token
347 347  
348 -Please select the NB95S31B template.
365 +AT+PWD=Token
349 349  
350 -[[image:image-20230809173310-5.png||height="558" width="926"]]
367 +[[image:image-20230802112413-21.png]]
351 351  
352 -[[image:image-20230809173438-6.png]]
353 353  
354 -[[image:image-20230809173800-7.png]]
370 +== 1.6 Create your first Subscription ==
355 355  
372 +Subscribe
356 356  
357 -Successfully imported template.
374 +Data is published according to the following structure:
358 358  
359 -[[image:image-20230809173835-8.png||height="515" width="860"]]
376 +dtck~/~//
360 360  
378 +Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
361 361  
362 -Users can set UDP port.
363 363  
364 -[[image:image-20230809174053-9.png]]
381 +[[image:image-20230802112413-22.png]]
365 365  
366 366  
367 -=== 3.5.2 Simulate Connection ===
384 +[[image:image-20230802112413-23.png]]
368 368  
369 369  
370 -We have completed the configuration of UDP. We can try sending packets to node red.
387 +[[image:image-20230802112413-24.png]]
371 371  
372 -[[image:image-20230810083934-1.png]]
373 373  
374 -[[image:image-20230810084048-2.png||height="535" width="1052"]]
390 +example:
375 375  
392 +AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
376 376  
377 -=== 3.5.3 Configure NB-IoT Sensors ===
394 +[[image:image-20230802112413-25.png]]
378 378  
396 +== 1.7 Define Publish Topic ==
379 379  
380 -* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
398 +Publish
381 381  
382 -* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
400 +To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
383 383  
402 +Due to the nature of MQTT, the topic prefix differs as follows:
384 384  
404 +dtck-pub~/~//
385 385  
386 -== 3.6 ThingsBoard.Cloud (via MQTT) ==
406 +example:
387 387  
388 -=== 3.6.1 Configure ThingsBoard ===
408 +AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
389 389  
390 -==== 3.6.1.1 Create Device ====
410 +== 1.8 upload data ==
391 391  
412 +[[image:image-20230802112413-26.png]]
392 392  
393 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
414 +[[image:image-20230802112413-27.png]]
394 394  
395 -[[image:image-20230802112413-32.png||height="583" width="1066"]]
416 +[[image:image-20230802112413-28.png]]
396 396  
418 += =
397 397  
398 -==== 3.6.1.2 Create Uplink & Downlink Converter ====
420 += 5. Node-Red (via MQTT) =
399 399  
400 400  
401 -(% style="color:blue" %)**Uplink Converter**
423 +== 1.1 Configure Node-Red ==
402 402  
403 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
425 +[[image:image-20230802112413-29.png]]
404 404  
405 -To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
427 +[[image:image-20230802112413-30.png]]
406 406  
407 -[[image:image-20230802112413-33.png||height="597" width="1061"]]
429 +== 1.2 Simulate Connection ==
408 408  
431 +[[image:image-20230802112413-31.png]]
409 409  
410 -(% style="color:blue" %)**Downlink Converter**
433 +== 1.3 Configure NB-IoT Sensors ==
411 411  
412 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
435 +* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
436 +* AT+CLIENT=any value
437 +* AT+UNAME=any value
438 +* AT+PWD=any value
439 +* AT+PUBTOPIC=any value
440 +* AT+SUBTOPIC=any value
413 413  
414 -[[image:image-20230802112413-34.png||height="598" width="1063"]]
442 += 6. ThingsBoard.Cloud (via MQTT) =
415 415  
416 -(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
444 +== 1.1 Configure ThingsBoard ==
417 417  
446 +=== 1.1.1 Create Device ===
418 418  
419 -==== 3.6.1.3 MQTT Integration Setup ====
448 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
420 420  
450 +[[image:image-20230802112413-32.png]]
421 421  
422 -Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
452 +=== 1.1.2 Create Uplink & Downlink Converter ===
423 423  
424 -[[image:image-20230802112413-35.png||height="597" width="1062"]]
454 +Uplink Converter
425 425  
456 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
426 426  
427 -* The next steps is to add the recently created uplink and downlink converters;
458 +To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
428 428  
429 -[[image:image-20230802112413-36.png||height="598" width="1062"]]
460 +[[image:image-20230802112413-33.png]]
430 430  
431 -[[image:image-20230802112413-37.png||height="598" width="1064"]]
432 432  
463 +Downlink Converter
433 433  
434 -(% style="color:blue" %)**Add a topic filter:**
465 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
435 435  
436 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
467 +[[image:image-20230802112413-34.png]]
437 437  
438 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
469 +Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
439 439  
440 -[[image:image-20230802112413-38.png||height="598" width="1064"]]
471 +=== 1.1.3 MQTT Integration Setup ===
441 441  
473 +Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
442 442  
443 -=== 3.6.2 Simulate with MQTT.fx ===
475 +[[image:image-20230802112413-35.png]]
444 444  
477 +* The next steps is to add the recently created uplink and downlink converters;
445 445  
479 +[[image:image-20230802112413-36.png]]
480 +
481 +[[image:image-20230802112413-37.png]]
482 +
483 +Add a topic filter:
484 +
485 +
486 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
487 +
488 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
489 +
490 +[[image:image-20230802112413-38.png]]
491 +
492 +== 1.2 Simulate with MQTT.fx ==
493 +
446 446  [[image:image-20230802112413-39.png]]
447 447  
448 -[[image:image-20230802112413-40.png||height="525" width="980"]]
496 +[[image:image-20230802112413-40.png]]
449 449  
498 +== 1.3 Configure NB-IoT Sensor ==
450 450  
451 -=== 3.6.3 Configure NB-IoT Sensor ===
500 +AT Commands
452 452  
502 +AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
453 453  
454 -(% style="color:blue" %)**AT Commands**
504 +AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
455 455  
456 -* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
506 +AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
457 457  
458 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
459 459  
460 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
509 +Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
461 461  
462 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
511 +CLIENT :“Any value”
463 463  
464 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
513 +User Name:“Any value”
465 465  
466 -* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
515 +Password:“Any value”
467 467  
517 +
468 468  Test Uplink by click the button for 1 second
469 469  
470 -[[image:image-20230802112413-41.png||height="496" width="828"]]
520 +[[image:image-20230802112413-41.png]]
471 471  
472 472  [[image:image-20230802112413-42.png]]
473 473  
474 -[[image:image-20230802112413-43.png||height="407" width="825"]]
524 +[[image:image-20230802112413-43.png]]
475 475  
476 476  
477 -== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
527 += 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
478 478  
479 -=== 3.7.1 Create device & Get Credentials ===
529 +== 5.1 Create device & Get Credentials ==
480 480  
481 -
482 482  We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
483 483  
484 484  [[image:image-20230802112413-44.png]]
... ... @@ -485,6 +485,7 @@
485 485  
486 486  [[image:image-20230802112413-45.png]]
487 487  
537 += =
488 488  
489 489  Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
490 490  
... ... @@ -491,87 +491,55 @@
491 491  [[image:image-20230802112413-46.png]]
492 492  
493 493  
494 -The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
544 +On the Connection Profile window, set the following information: (这边加一个截图)
495 495  
496 -(% style="color:blue" %)**On the Connection Profile window, set the following information:**
546 +* Profile Name: “Any name”
547 +* Broker Address: mqtt.tago.io
548 +* Broker Port: 1883
549 +* Client ID: “Any value”
497 497  
498 -* (% style="color:#037691" %)**Profile Name: “Any name”**
551 +On the section User credentials, set the following information:(这边加一个截图)
499 499  
500 -* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
553 +* User Name: “Any value” Tago validates your user by the token only
554 +* Password: “Your device token”
555 +* PUBTOPIC: “Any value”
556 +* SUBTOPIC: “Any value”
501 501  
502 -* (% style="color:#037691" %)**Broker Port: 8883**
558 +== 5.2 Simulate with MQTT.fx ==
503 503  
504 -* (% style="color:#037691" %)**Client ID: “Any value”**
560 +[[image:image-20230802112413-47.png]]
505 505  
506 -(% style="color:blue" %)**On the section User credentials, set the following information:**
562 +[[image:image-20230802112413-48.png]]
507 507  
508 -* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
564 +Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
509 509  
510 -* (% style="color:#037691" %)**Password: “Your device token”**
566 +[[image:image-20230802112413-49.png]]
511 511  
512 -* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
568 +== 1.4. tago data ==
513 513  
514 -* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
515 515  
516 -(% style="color:blue" %)**AT command:**
571 +[[image:image-20230802112413-50.png]]
517 517  
518 -* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
573 +[[image:image-20230802112413-51.png]]
519 519  
520 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
575 +== 1.4. TLS mode ==
521 521  
522 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
577 +Users can choose to use SSL/TLS mode.
523 523  
524 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
579 +On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
525 525  
526 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
581 +The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
527 527  
528 -* (% style="color:#037691" %)**AT+PWD=“Your device token”**
583 +* Profile Name: “Any name”
584 +* Broker Address: mqtt.tago.io
585 +* Broker Port: 8883
586 +* Client ID: “Any value”
587 +* User Name: “Any value” Tago validates your user by the token only
588 +* Password: “Your device token”
589 +* PUBTOPIC: “Any value”
590 +* SUBTOPIC: “Any value”
529 529  
530 -
531 -
532 -=== 3.7.2 Simulate with MQTT.fx ===
533 -
534 -
535 535  [[image:image-20230802112413-52.png]]
536 536  
537 537  
538 -[[image:image-20230808105300-2.png||height="553" width="1026"]]
539 -
540 -
541 -Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
542 -
543 -[[image:image-20230808105217-1.png||height="556" width="1031"]]
544 -
545 -[[image:image-20230808105329-3.png]]
546 -
547 -
548 -=== 3.7.3 tago data ===
549 -
550 -
551 -[[image:image-20230802112413-50.png||height="242" width="1037"]]
552 -
553 -[[image:image-20230802112413-51.png||height="184" width="696"]]
554 -
555 -
556 -== 3.8 TCP Connection ==
557 -
558 -
559 -(% style="color:blue" %)**AT command:**
560 -
561 -* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
562 -
563 -* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
564 -
565 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
566 -
567 -
568 -
569 -(% style="color:blue" %)**Sensor Console Output when Uplink:**
570 -
571 -[[image:image-20230807233631-1.png]]
572 -
573 -
574 -(% style="color:blue" %)**See result in TCP Server:**
575 -
576 -[[image:image-20230807233631-2.png]]
577 -
595 +
image-20230807233631-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20230816201942-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -99.8 KB
Content